mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 01:53:15 +07:00
9a66d36cc7
Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon <will.deacon@arm.com>
555 lines
14 KiB
C
555 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2017 NXP
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/perf_event.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define COUNTER_CNTL 0x0
|
|
#define COUNTER_READ 0x20
|
|
|
|
#define COUNTER_DPCR1 0x30
|
|
|
|
#define CNTL_OVER 0x1
|
|
#define CNTL_CLEAR 0x2
|
|
#define CNTL_EN 0x4
|
|
#define CNTL_EN_MASK 0xFFFFFFFB
|
|
#define CNTL_CLEAR_MASK 0xFFFFFFFD
|
|
#define CNTL_OVER_MASK 0xFFFFFFFE
|
|
|
|
#define CNTL_CSV_SHIFT 24
|
|
#define CNTL_CSV_MASK (0xFF << CNTL_CSV_SHIFT)
|
|
|
|
#define EVENT_CYCLES_ID 0
|
|
#define EVENT_CYCLES_COUNTER 0
|
|
#define NUM_COUNTERS 4
|
|
|
|
#define to_ddr_pmu(p) container_of(p, struct ddr_pmu, pmu)
|
|
|
|
#define DDR_PERF_DEV_NAME "imx8_ddr"
|
|
#define DDR_CPUHP_CB_NAME DDR_PERF_DEV_NAME "_perf_pmu"
|
|
|
|
static DEFINE_IDA(ddr_ida);
|
|
|
|
static const struct of_device_id imx_ddr_pmu_dt_ids[] = {
|
|
{ .compatible = "fsl,imx8-ddr-pmu",},
|
|
{ .compatible = "fsl,imx8m-ddr-pmu",},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
struct ddr_pmu {
|
|
struct pmu pmu;
|
|
void __iomem *base;
|
|
unsigned int cpu;
|
|
struct hlist_node node;
|
|
struct device *dev;
|
|
struct perf_event *events[NUM_COUNTERS];
|
|
int active_events;
|
|
enum cpuhp_state cpuhp_state;
|
|
int irq;
|
|
int id;
|
|
};
|
|
|
|
static ssize_t ddr_perf_cpumask_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct ddr_pmu *pmu = dev_get_drvdata(dev);
|
|
|
|
return cpumap_print_to_pagebuf(true, buf, cpumask_of(pmu->cpu));
|
|
}
|
|
|
|
static struct device_attribute ddr_perf_cpumask_attr =
|
|
__ATTR(cpumask, 0444, ddr_perf_cpumask_show, NULL);
|
|
|
|
static struct attribute *ddr_perf_cpumask_attrs[] = {
|
|
&ddr_perf_cpumask_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group ddr_perf_cpumask_attr_group = {
|
|
.attrs = ddr_perf_cpumask_attrs,
|
|
};
|
|
|
|
static ssize_t
|
|
ddr_pmu_event_show(struct device *dev, struct device_attribute *attr,
|
|
char *page)
|
|
{
|
|
struct perf_pmu_events_attr *pmu_attr;
|
|
|
|
pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
|
|
return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
|
|
}
|
|
|
|
#define IMX8_DDR_PMU_EVENT_ATTR(_name, _id) \
|
|
(&((struct perf_pmu_events_attr[]) { \
|
|
{ .attr = __ATTR(_name, 0444, ddr_pmu_event_show, NULL),\
|
|
.id = _id, } \
|
|
})[0].attr.attr)
|
|
|
|
static struct attribute *ddr_perf_events_attrs[] = {
|
|
IMX8_DDR_PMU_EVENT_ATTR(cycles, EVENT_CYCLES_ID),
|
|
IMX8_DDR_PMU_EVENT_ATTR(selfresh, 0x01),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read-accesses, 0x04),
|
|
IMX8_DDR_PMU_EVENT_ATTR(write-accesses, 0x05),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read-queue-depth, 0x08),
|
|
IMX8_DDR_PMU_EVENT_ATTR(write-queue-depth, 0x09),
|
|
IMX8_DDR_PMU_EVENT_ATTR(lp-read-credit-cnt, 0x10),
|
|
IMX8_DDR_PMU_EVENT_ATTR(hp-read-credit-cnt, 0x11),
|
|
IMX8_DDR_PMU_EVENT_ATTR(write-credit-cnt, 0x12),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read-command, 0x20),
|
|
IMX8_DDR_PMU_EVENT_ATTR(write-command, 0x21),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read-modify-write-command, 0x22),
|
|
IMX8_DDR_PMU_EVENT_ATTR(hp-read, 0x23),
|
|
IMX8_DDR_PMU_EVENT_ATTR(hp-req-nocredit, 0x24),
|
|
IMX8_DDR_PMU_EVENT_ATTR(hp-xact-credit, 0x25),
|
|
IMX8_DDR_PMU_EVENT_ATTR(lp-req-nocredit, 0x26),
|
|
IMX8_DDR_PMU_EVENT_ATTR(lp-xact-credit, 0x27),
|
|
IMX8_DDR_PMU_EVENT_ATTR(wr-xact-credit, 0x29),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read-cycles, 0x2a),
|
|
IMX8_DDR_PMU_EVENT_ATTR(write-cycles, 0x2b),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read-write-transition, 0x30),
|
|
IMX8_DDR_PMU_EVENT_ATTR(precharge, 0x31),
|
|
IMX8_DDR_PMU_EVENT_ATTR(activate, 0x32),
|
|
IMX8_DDR_PMU_EVENT_ATTR(load-mode, 0x33),
|
|
IMX8_DDR_PMU_EVENT_ATTR(perf-mwr, 0x34),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read, 0x35),
|
|
IMX8_DDR_PMU_EVENT_ATTR(read-activate, 0x36),
|
|
IMX8_DDR_PMU_EVENT_ATTR(refresh, 0x37),
|
|
IMX8_DDR_PMU_EVENT_ATTR(write, 0x38),
|
|
IMX8_DDR_PMU_EVENT_ATTR(raw-hazard, 0x39),
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group ddr_perf_events_attr_group = {
|
|
.name = "events",
|
|
.attrs = ddr_perf_events_attrs,
|
|
};
|
|
|
|
PMU_FORMAT_ATTR(event, "config:0-7");
|
|
|
|
static struct attribute *ddr_perf_format_attrs[] = {
|
|
&format_attr_event.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group ddr_perf_format_attr_group = {
|
|
.name = "format",
|
|
.attrs = ddr_perf_format_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *attr_groups[] = {
|
|
&ddr_perf_events_attr_group,
|
|
&ddr_perf_format_attr_group,
|
|
&ddr_perf_cpumask_attr_group,
|
|
NULL,
|
|
};
|
|
|
|
static u32 ddr_perf_alloc_counter(struct ddr_pmu *pmu, int event)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Always map cycle event to counter 0
|
|
* Cycles counter is dedicated for cycle event
|
|
* can't used for the other events
|
|
*/
|
|
if (event == EVENT_CYCLES_ID) {
|
|
if (pmu->events[EVENT_CYCLES_COUNTER] == NULL)
|
|
return EVENT_CYCLES_COUNTER;
|
|
else
|
|
return -ENOENT;
|
|
}
|
|
|
|
for (i = 1; i < NUM_COUNTERS; i++) {
|
|
if (pmu->events[i] == NULL)
|
|
return i;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static void ddr_perf_free_counter(struct ddr_pmu *pmu, int counter)
|
|
{
|
|
pmu->events[counter] = NULL;
|
|
}
|
|
|
|
static u32 ddr_perf_read_counter(struct ddr_pmu *pmu, int counter)
|
|
{
|
|
return readl_relaxed(pmu->base + COUNTER_READ + counter * 4);
|
|
}
|
|
|
|
static int ddr_perf_event_init(struct perf_event *event)
|
|
{
|
|
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct perf_event *sibling;
|
|
|
|
if (event->attr.type != event->pmu->type)
|
|
return -ENOENT;
|
|
|
|
if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (event->cpu < 0) {
|
|
dev_warn(pmu->dev, "Can't provide per-task data!\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* We must NOT create groups containing mixed PMUs, although software
|
|
* events are acceptable (for example to create a CCN group
|
|
* periodically read when a hrtimer aka cpu-clock leader triggers).
|
|
*/
|
|
if (event->group_leader->pmu != event->pmu &&
|
|
!is_software_event(event->group_leader))
|
|
return -EINVAL;
|
|
|
|
for_each_sibling_event(sibling, event->group_leader) {
|
|
if (sibling->pmu != event->pmu &&
|
|
!is_software_event(sibling))
|
|
return -EINVAL;
|
|
}
|
|
|
|
event->cpu = pmu->cpu;
|
|
hwc->idx = -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void ddr_perf_event_update(struct perf_event *event)
|
|
{
|
|
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
u64 delta, prev_raw_count, new_raw_count;
|
|
int counter = hwc->idx;
|
|
|
|
do {
|
|
prev_raw_count = local64_read(&hwc->prev_count);
|
|
new_raw_count = ddr_perf_read_counter(pmu, counter);
|
|
} while (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
|
|
new_raw_count) != prev_raw_count);
|
|
|
|
delta = (new_raw_count - prev_raw_count) & 0xFFFFFFFF;
|
|
|
|
local64_add(delta, &event->count);
|
|
}
|
|
|
|
static void ddr_perf_counter_enable(struct ddr_pmu *pmu, int config,
|
|
int counter, bool enable)
|
|
{
|
|
u8 reg = counter * 4 + COUNTER_CNTL;
|
|
int val;
|
|
|
|
if (enable) {
|
|
/*
|
|
* must disable first, then enable again
|
|
* otherwise, cycle counter will not work
|
|
* if previous state is enabled.
|
|
*/
|
|
writel(0, pmu->base + reg);
|
|
val = CNTL_EN | CNTL_CLEAR;
|
|
val |= FIELD_PREP(CNTL_CSV_MASK, config);
|
|
writel(val, pmu->base + reg);
|
|
} else {
|
|
/* Disable counter */
|
|
writel(0, pmu->base + reg);
|
|
}
|
|
}
|
|
|
|
static void ddr_perf_event_start(struct perf_event *event, int flags)
|
|
{
|
|
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
|
|
local64_set(&hwc->prev_count, 0);
|
|
|
|
ddr_perf_counter_enable(pmu, event->attr.config, counter, true);
|
|
|
|
hwc->state = 0;
|
|
}
|
|
|
|
static int ddr_perf_event_add(struct perf_event *event, int flags)
|
|
{
|
|
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter;
|
|
int cfg = event->attr.config;
|
|
|
|
counter = ddr_perf_alloc_counter(pmu, cfg);
|
|
if (counter < 0) {
|
|
dev_dbg(pmu->dev, "There are not enough counters\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
pmu->events[counter] = event;
|
|
pmu->active_events++;
|
|
hwc->idx = counter;
|
|
|
|
hwc->state |= PERF_HES_STOPPED;
|
|
|
|
if (flags & PERF_EF_START)
|
|
ddr_perf_event_start(event, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ddr_perf_event_stop(struct perf_event *event, int flags)
|
|
{
|
|
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
|
|
ddr_perf_counter_enable(pmu, event->attr.config, counter, false);
|
|
ddr_perf_event_update(event);
|
|
|
|
hwc->state |= PERF_HES_STOPPED;
|
|
}
|
|
|
|
static void ddr_perf_event_del(struct perf_event *event, int flags)
|
|
{
|
|
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
|
|
ddr_perf_event_stop(event, PERF_EF_UPDATE);
|
|
|
|
ddr_perf_free_counter(pmu, counter);
|
|
pmu->active_events--;
|
|
hwc->idx = -1;
|
|
}
|
|
|
|
static void ddr_perf_pmu_enable(struct pmu *pmu)
|
|
{
|
|
struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
|
|
|
|
/* enable cycle counter if cycle is not active event list */
|
|
if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
|
|
ddr_perf_counter_enable(ddr_pmu,
|
|
EVENT_CYCLES_ID,
|
|
EVENT_CYCLES_COUNTER,
|
|
true);
|
|
}
|
|
|
|
static void ddr_perf_pmu_disable(struct pmu *pmu)
|
|
{
|
|
struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
|
|
|
|
if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
|
|
ddr_perf_counter_enable(ddr_pmu,
|
|
EVENT_CYCLES_ID,
|
|
EVENT_CYCLES_COUNTER,
|
|
false);
|
|
}
|
|
|
|
static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base,
|
|
struct device *dev)
|
|
{
|
|
*pmu = (struct ddr_pmu) {
|
|
.pmu = (struct pmu) {
|
|
.capabilities = PERF_PMU_CAP_NO_EXCLUDE,
|
|
.task_ctx_nr = perf_invalid_context,
|
|
.attr_groups = attr_groups,
|
|
.event_init = ddr_perf_event_init,
|
|
.add = ddr_perf_event_add,
|
|
.del = ddr_perf_event_del,
|
|
.start = ddr_perf_event_start,
|
|
.stop = ddr_perf_event_stop,
|
|
.read = ddr_perf_event_update,
|
|
.pmu_enable = ddr_perf_pmu_enable,
|
|
.pmu_disable = ddr_perf_pmu_disable,
|
|
},
|
|
.base = base,
|
|
.dev = dev,
|
|
};
|
|
|
|
pmu->id = ida_simple_get(&ddr_ida, 0, 0, GFP_KERNEL);
|
|
return pmu->id;
|
|
}
|
|
|
|
static irqreturn_t ddr_perf_irq_handler(int irq, void *p)
|
|
{
|
|
int i;
|
|
struct ddr_pmu *pmu = (struct ddr_pmu *) p;
|
|
struct perf_event *event, *cycle_event = NULL;
|
|
|
|
/* all counter will stop if cycle counter disabled */
|
|
ddr_perf_counter_enable(pmu,
|
|
EVENT_CYCLES_ID,
|
|
EVENT_CYCLES_COUNTER,
|
|
false);
|
|
/*
|
|
* When the cycle counter overflows, all counters are stopped,
|
|
* and an IRQ is raised. If any other counter overflows, it
|
|
* continues counting, and no IRQ is raised.
|
|
*
|
|
* Cycles occur at least 4 times as often as other events, so we
|
|
* can update all events on a cycle counter overflow and not
|
|
* lose events.
|
|
*
|
|
*/
|
|
for (i = 0; i < NUM_COUNTERS; i++) {
|
|
|
|
if (!pmu->events[i])
|
|
continue;
|
|
|
|
event = pmu->events[i];
|
|
|
|
ddr_perf_event_update(event);
|
|
|
|
if (event->hw.idx == EVENT_CYCLES_COUNTER)
|
|
cycle_event = event;
|
|
}
|
|
|
|
ddr_perf_counter_enable(pmu,
|
|
EVENT_CYCLES_ID,
|
|
EVENT_CYCLES_COUNTER,
|
|
true);
|
|
if (cycle_event)
|
|
ddr_perf_event_update(cycle_event);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
|
|
{
|
|
struct ddr_pmu *pmu = hlist_entry_safe(node, struct ddr_pmu, node);
|
|
int target;
|
|
|
|
if (cpu != pmu->cpu)
|
|
return 0;
|
|
|
|
target = cpumask_any_but(cpu_online_mask, cpu);
|
|
if (target >= nr_cpu_ids)
|
|
return 0;
|
|
|
|
perf_pmu_migrate_context(&pmu->pmu, cpu, target);
|
|
pmu->cpu = target;
|
|
|
|
WARN_ON(irq_set_affinity_hint(pmu->irq, cpumask_of(pmu->cpu)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ddr_perf_probe(struct platform_device *pdev)
|
|
{
|
|
struct ddr_pmu *pmu;
|
|
struct device_node *np;
|
|
void __iomem *base;
|
|
char *name;
|
|
int num;
|
|
int ret;
|
|
int irq;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
np = pdev->dev.of_node;
|
|
|
|
pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
|
|
if (!pmu)
|
|
return -ENOMEM;
|
|
|
|
num = ddr_perf_init(pmu, base, &pdev->dev);
|
|
|
|
platform_set_drvdata(pdev, pmu);
|
|
|
|
name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME "%d",
|
|
num);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
pmu->cpu = raw_smp_processor_id();
|
|
ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
|
|
DDR_CPUHP_CB_NAME,
|
|
NULL,
|
|
ddr_perf_offline_cpu);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "cpuhp_setup_state_multi failed\n");
|
|
goto ddr_perf_err;
|
|
}
|
|
|
|
pmu->cpuhp_state = ret;
|
|
|
|
/* Register the pmu instance for cpu hotplug */
|
|
cpuhp_state_add_instance_nocalls(pmu->cpuhp_state, &pmu->node);
|
|
|
|
/* Request irq */
|
|
irq = of_irq_get(np, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "Failed to get irq: %d", irq);
|
|
ret = irq;
|
|
goto ddr_perf_err;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq,
|
|
ddr_perf_irq_handler,
|
|
IRQF_NOBALANCING | IRQF_NO_THREAD,
|
|
DDR_CPUHP_CB_NAME,
|
|
pmu);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Request irq failed: %d", ret);
|
|
goto ddr_perf_err;
|
|
}
|
|
|
|
pmu->irq = irq;
|
|
ret = irq_set_affinity_hint(pmu->irq, cpumask_of(pmu->cpu));
|
|
if (ret) {
|
|
dev_err(pmu->dev, "Failed to set interrupt affinity!\n");
|
|
goto ddr_perf_err;
|
|
}
|
|
|
|
ret = perf_pmu_register(&pmu->pmu, name, -1);
|
|
if (ret)
|
|
goto ddr_perf_err;
|
|
|
|
return 0;
|
|
|
|
ddr_perf_err:
|
|
if (pmu->cpuhp_state)
|
|
cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
|
|
|
|
ida_simple_remove(&ddr_ida, pmu->id);
|
|
dev_warn(&pdev->dev, "i.MX8 DDR Perf PMU failed (%d), disabled\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int ddr_perf_remove(struct platform_device *pdev)
|
|
{
|
|
struct ddr_pmu *pmu = platform_get_drvdata(pdev);
|
|
|
|
cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
|
|
irq_set_affinity_hint(pmu->irq, NULL);
|
|
|
|
perf_pmu_unregister(&pmu->pmu);
|
|
|
|
ida_simple_remove(&ddr_ida, pmu->id);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver imx_ddr_pmu_driver = {
|
|
.driver = {
|
|
.name = "imx-ddr-pmu",
|
|
.of_match_table = imx_ddr_pmu_dt_ids,
|
|
},
|
|
.probe = ddr_perf_probe,
|
|
.remove = ddr_perf_remove,
|
|
};
|
|
|
|
module_platform_driver(imx_ddr_pmu_driver);
|
|
MODULE_LICENSE("GPL v2");
|