mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 02:25:44 +07:00
c678fa6634
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2177 lines
59 KiB
C
2177 lines
59 KiB
C
/*
|
|
* Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems)
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*
|
|
* This supports the Atmel AHB DMA Controller found in several Atmel SoCs.
|
|
* The only Atmel DMA Controller that is not covered by this driver is the one
|
|
* found on AT91SAM9263.
|
|
*/
|
|
|
|
#include <dt-bindings/dma/at91.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
|
|
#include "at_hdmac_regs.h"
|
|
#include "dmaengine.h"
|
|
|
|
/*
|
|
* Glossary
|
|
* --------
|
|
*
|
|
* at_hdmac : Name of the ATmel AHB DMA Controller
|
|
* at_dma_ / atdma : ATmel DMA controller entity related
|
|
* atc_ / atchan : ATmel DMA Channel entity related
|
|
*/
|
|
|
|
#define ATC_DEFAULT_CFG (ATC_FIFOCFG_HALFFIFO)
|
|
#define ATC_DEFAULT_CTRLB (ATC_SIF(AT_DMA_MEM_IF) \
|
|
|ATC_DIF(AT_DMA_MEM_IF))
|
|
#define ATC_DMA_BUSWIDTHS\
|
|
(BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) |\
|
|
BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |\
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |\
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
|
|
|
|
#define ATC_MAX_DSCR_TRIALS 10
|
|
|
|
/*
|
|
* Initial number of descriptors to allocate for each channel. This could
|
|
* be increased during dma usage.
|
|
*/
|
|
static unsigned int init_nr_desc_per_channel = 64;
|
|
module_param(init_nr_desc_per_channel, uint, 0644);
|
|
MODULE_PARM_DESC(init_nr_desc_per_channel,
|
|
"initial descriptors per channel (default: 64)");
|
|
|
|
|
|
/* prototypes */
|
|
static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);
|
|
static void atc_issue_pending(struct dma_chan *chan);
|
|
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static inline unsigned int atc_get_xfer_width(dma_addr_t src, dma_addr_t dst,
|
|
size_t len)
|
|
{
|
|
unsigned int width;
|
|
|
|
if (!((src | dst | len) & 3))
|
|
width = 2;
|
|
else if (!((src | dst | len) & 1))
|
|
width = 1;
|
|
else
|
|
width = 0;
|
|
|
|
return width;
|
|
}
|
|
|
|
static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
|
|
{
|
|
return list_first_entry(&atchan->active_list,
|
|
struct at_desc, desc_node);
|
|
}
|
|
|
|
static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
|
|
{
|
|
return list_first_entry(&atchan->queue,
|
|
struct at_desc, desc_node);
|
|
}
|
|
|
|
/**
|
|
* atc_alloc_descriptor - allocate and return an initialized descriptor
|
|
* @chan: the channel to allocate descriptors for
|
|
* @gfp_flags: GFP allocation flags
|
|
*
|
|
* Note: The ack-bit is positioned in the descriptor flag at creation time
|
|
* to make initial allocation more convenient. This bit will be cleared
|
|
* and control will be given to client at usage time (during
|
|
* preparation functions).
|
|
*/
|
|
static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct at_desc *desc = NULL;
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
dma_addr_t phys;
|
|
|
|
desc = dma_pool_zalloc(atdma->dma_desc_pool, gfp_flags, &phys);
|
|
if (desc) {
|
|
INIT_LIST_HEAD(&desc->tx_list);
|
|
dma_async_tx_descriptor_init(&desc->txd, chan);
|
|
/* txd.flags will be overwritten in prep functions */
|
|
desc->txd.flags = DMA_CTRL_ACK;
|
|
desc->txd.tx_submit = atc_tx_submit;
|
|
desc->txd.phys = phys;
|
|
}
|
|
|
|
return desc;
|
|
}
|
|
|
|
/**
|
|
* atc_desc_get - get an unused descriptor from free_list
|
|
* @atchan: channel we want a new descriptor for
|
|
*/
|
|
static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
|
|
{
|
|
struct at_desc *desc, *_desc;
|
|
struct at_desc *ret = NULL;
|
|
unsigned long flags;
|
|
unsigned int i = 0;
|
|
LIST_HEAD(tmp_list);
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
|
|
i++;
|
|
if (async_tx_test_ack(&desc->txd)) {
|
|
list_del(&desc->desc_node);
|
|
ret = desc;
|
|
break;
|
|
}
|
|
dev_dbg(chan2dev(&atchan->chan_common),
|
|
"desc %p not ACKed\n", desc);
|
|
}
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
dev_vdbg(chan2dev(&atchan->chan_common),
|
|
"scanned %u descriptors on freelist\n", i);
|
|
|
|
/* no more descriptor available in initial pool: create one more */
|
|
if (!ret) {
|
|
ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
|
|
if (ret) {
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
atchan->descs_allocated++;
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
} else {
|
|
dev_err(chan2dev(&atchan->chan_common),
|
|
"not enough descriptors available\n");
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* atc_desc_put - move a descriptor, including any children, to the free list
|
|
* @atchan: channel we work on
|
|
* @desc: descriptor, at the head of a chain, to move to free list
|
|
*/
|
|
static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
|
|
{
|
|
if (desc) {
|
|
struct at_desc *child;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
list_for_each_entry(child, &desc->tx_list, desc_node)
|
|
dev_vdbg(chan2dev(&atchan->chan_common),
|
|
"moving child desc %p to freelist\n",
|
|
child);
|
|
list_splice_init(&desc->tx_list, &atchan->free_list);
|
|
dev_vdbg(chan2dev(&atchan->chan_common),
|
|
"moving desc %p to freelist\n", desc);
|
|
list_add(&desc->desc_node, &atchan->free_list);
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* atc_desc_chain - build chain adding a descriptor
|
|
* @first: address of first descriptor of the chain
|
|
* @prev: address of previous descriptor of the chain
|
|
* @desc: descriptor to queue
|
|
*
|
|
* Called from prep_* functions
|
|
*/
|
|
static void atc_desc_chain(struct at_desc **first, struct at_desc **prev,
|
|
struct at_desc *desc)
|
|
{
|
|
if (!(*first)) {
|
|
*first = desc;
|
|
} else {
|
|
/* inform the HW lli about chaining */
|
|
(*prev)->lli.dscr = desc->txd.phys;
|
|
/* insert the link descriptor to the LD ring */
|
|
list_add_tail(&desc->desc_node,
|
|
&(*first)->tx_list);
|
|
}
|
|
*prev = desc;
|
|
}
|
|
|
|
/**
|
|
* atc_dostart - starts the DMA engine for real
|
|
* @atchan: the channel we want to start
|
|
* @first: first descriptor in the list we want to begin with
|
|
*
|
|
* Called with atchan->lock held and bh disabled
|
|
*/
|
|
static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first)
|
|
{
|
|
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
|
|
|
|
/* ASSERT: channel is idle */
|
|
if (atc_chan_is_enabled(atchan)) {
|
|
dev_err(chan2dev(&atchan->chan_common),
|
|
"BUG: Attempted to start non-idle channel\n");
|
|
dev_err(chan2dev(&atchan->chan_common),
|
|
" channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
|
|
channel_readl(atchan, SADDR),
|
|
channel_readl(atchan, DADDR),
|
|
channel_readl(atchan, CTRLA),
|
|
channel_readl(atchan, CTRLB),
|
|
channel_readl(atchan, DSCR));
|
|
|
|
/* The tasklet will hopefully advance the queue... */
|
|
return;
|
|
}
|
|
|
|
vdbg_dump_regs(atchan);
|
|
|
|
channel_writel(atchan, SADDR, 0);
|
|
channel_writel(atchan, DADDR, 0);
|
|
channel_writel(atchan, CTRLA, 0);
|
|
channel_writel(atchan, CTRLB, 0);
|
|
channel_writel(atchan, DSCR, first->txd.phys);
|
|
channel_writel(atchan, SPIP, ATC_SPIP_HOLE(first->src_hole) |
|
|
ATC_SPIP_BOUNDARY(first->boundary));
|
|
channel_writel(atchan, DPIP, ATC_DPIP_HOLE(first->dst_hole) |
|
|
ATC_DPIP_BOUNDARY(first->boundary));
|
|
dma_writel(atdma, CHER, atchan->mask);
|
|
|
|
vdbg_dump_regs(atchan);
|
|
}
|
|
|
|
/*
|
|
* atc_get_desc_by_cookie - get the descriptor of a cookie
|
|
* @atchan: the DMA channel
|
|
* @cookie: the cookie to get the descriptor for
|
|
*/
|
|
static struct at_desc *atc_get_desc_by_cookie(struct at_dma_chan *atchan,
|
|
dma_cookie_t cookie)
|
|
{
|
|
struct at_desc *desc, *_desc;
|
|
|
|
list_for_each_entry_safe(desc, _desc, &atchan->queue, desc_node) {
|
|
if (desc->txd.cookie == cookie)
|
|
return desc;
|
|
}
|
|
|
|
list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) {
|
|
if (desc->txd.cookie == cookie)
|
|
return desc;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* atc_calc_bytes_left - calculates the number of bytes left according to the
|
|
* value read from CTRLA.
|
|
*
|
|
* @current_len: the number of bytes left before reading CTRLA
|
|
* @ctrla: the value of CTRLA
|
|
*/
|
|
static inline int atc_calc_bytes_left(int current_len, u32 ctrla)
|
|
{
|
|
u32 btsize = (ctrla & ATC_BTSIZE_MAX);
|
|
u32 src_width = ATC_REG_TO_SRC_WIDTH(ctrla);
|
|
|
|
/*
|
|
* According to the datasheet, when reading the Control A Register
|
|
* (ctrla), the Buffer Transfer Size (btsize) bitfield refers to the
|
|
* number of transfers completed on the Source Interface.
|
|
* So btsize is always a number of source width transfers.
|
|
*/
|
|
return current_len - (btsize << src_width);
|
|
}
|
|
|
|
/**
|
|
* atc_get_bytes_left - get the number of bytes residue for a cookie
|
|
* @chan: DMA channel
|
|
* @cookie: transaction identifier to check status of
|
|
*/
|
|
static int atc_get_bytes_left(struct dma_chan *chan, dma_cookie_t cookie)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_desc *desc_first = atc_first_active(atchan);
|
|
struct at_desc *desc;
|
|
int ret;
|
|
u32 ctrla, dscr, trials;
|
|
|
|
/*
|
|
* If the cookie doesn't match to the currently running transfer then
|
|
* we can return the total length of the associated DMA transfer,
|
|
* because it is still queued.
|
|
*/
|
|
desc = atc_get_desc_by_cookie(atchan, cookie);
|
|
if (desc == NULL)
|
|
return -EINVAL;
|
|
else if (desc != desc_first)
|
|
return desc->total_len;
|
|
|
|
/* cookie matches to the currently running transfer */
|
|
ret = desc_first->total_len;
|
|
|
|
if (desc_first->lli.dscr) {
|
|
/* hardware linked list transfer */
|
|
|
|
/*
|
|
* Calculate the residue by removing the length of the child
|
|
* descriptors already transferred from the total length.
|
|
* To get the current child descriptor we can use the value of
|
|
* the channel's DSCR register and compare it against the value
|
|
* of the hardware linked list structure of each child
|
|
* descriptor.
|
|
*
|
|
* The CTRLA register provides us with the amount of data
|
|
* already read from the source for the current child
|
|
* descriptor. So we can compute a more accurate residue by also
|
|
* removing the number of bytes corresponding to this amount of
|
|
* data.
|
|
*
|
|
* However, the DSCR and CTRLA registers cannot be read both
|
|
* atomically. Hence a race condition may occur: the first read
|
|
* register may refer to one child descriptor whereas the second
|
|
* read may refer to a later child descriptor in the list
|
|
* because of the DMA transfer progression inbetween the two
|
|
* reads.
|
|
*
|
|
* One solution could have been to pause the DMA transfer, read
|
|
* the DSCR and CTRLA then resume the DMA transfer. Nonetheless,
|
|
* this approach presents some drawbacks:
|
|
* - If the DMA transfer is paused, RX overruns or TX underruns
|
|
* are more likey to occur depending on the system latency.
|
|
* Taking the USART driver as an example, it uses a cyclic DMA
|
|
* transfer to read data from the Receive Holding Register
|
|
* (RHR) to avoid RX overruns since the RHR is not protected
|
|
* by any FIFO on most Atmel SoCs. So pausing the DMA transfer
|
|
* to compute the residue would break the USART driver design.
|
|
* - The atc_pause() function masks interrupts but we'd rather
|
|
* avoid to do so for system latency purpose.
|
|
*
|
|
* Then we'd rather use another solution: the DSCR is read a
|
|
* first time, the CTRLA is read in turn, next the DSCR is read
|
|
* a second time. If the two consecutive read values of the DSCR
|
|
* are the same then we assume both refers to the very same
|
|
* child descriptor as well as the CTRLA value read inbetween
|
|
* does. For cyclic tranfers, the assumption is that a full loop
|
|
* is "not so fast".
|
|
* If the two DSCR values are different, we read again the CTRLA
|
|
* then the DSCR till two consecutive read values from DSCR are
|
|
* equal or till the maxium trials is reach.
|
|
* This algorithm is very unlikely not to find a stable value for
|
|
* DSCR.
|
|
*/
|
|
|
|
dscr = channel_readl(atchan, DSCR);
|
|
rmb(); /* ensure DSCR is read before CTRLA */
|
|
ctrla = channel_readl(atchan, CTRLA);
|
|
for (trials = 0; trials < ATC_MAX_DSCR_TRIALS; ++trials) {
|
|
u32 new_dscr;
|
|
|
|
rmb(); /* ensure DSCR is read after CTRLA */
|
|
new_dscr = channel_readl(atchan, DSCR);
|
|
|
|
/*
|
|
* If the DSCR register value has not changed inside the
|
|
* DMA controller since the previous read, we assume
|
|
* that both the dscr and ctrla values refers to the
|
|
* very same descriptor.
|
|
*/
|
|
if (likely(new_dscr == dscr))
|
|
break;
|
|
|
|
/*
|
|
* DSCR has changed inside the DMA controller, so the
|
|
* previouly read value of CTRLA may refer to an already
|
|
* processed descriptor hence could be outdated.
|
|
* We need to update ctrla to match the current
|
|
* descriptor.
|
|
*/
|
|
dscr = new_dscr;
|
|
rmb(); /* ensure DSCR is read before CTRLA */
|
|
ctrla = channel_readl(atchan, CTRLA);
|
|
}
|
|
if (unlikely(trials >= ATC_MAX_DSCR_TRIALS))
|
|
return -ETIMEDOUT;
|
|
|
|
/* for the first descriptor we can be more accurate */
|
|
if (desc_first->lli.dscr == dscr)
|
|
return atc_calc_bytes_left(ret, ctrla);
|
|
|
|
ret -= desc_first->len;
|
|
list_for_each_entry(desc, &desc_first->tx_list, desc_node) {
|
|
if (desc->lli.dscr == dscr)
|
|
break;
|
|
|
|
ret -= desc->len;
|
|
}
|
|
|
|
/*
|
|
* For the current descriptor in the chain we can calculate
|
|
* the remaining bytes using the channel's register.
|
|
*/
|
|
ret = atc_calc_bytes_left(ret, ctrla);
|
|
} else {
|
|
/* single transfer */
|
|
ctrla = channel_readl(atchan, CTRLA);
|
|
ret = atc_calc_bytes_left(ret, ctrla);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* atc_chain_complete - finish work for one transaction chain
|
|
* @atchan: channel we work on
|
|
* @desc: descriptor at the head of the chain we want do complete
|
|
*
|
|
* Called with atchan->lock held and bh disabled */
|
|
static void
|
|
atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
|
|
{
|
|
struct dma_async_tx_descriptor *txd = &desc->txd;
|
|
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
|
|
|
|
dev_vdbg(chan2dev(&atchan->chan_common),
|
|
"descriptor %u complete\n", txd->cookie);
|
|
|
|
/* mark the descriptor as complete for non cyclic cases only */
|
|
if (!atc_chan_is_cyclic(atchan))
|
|
dma_cookie_complete(txd);
|
|
|
|
/* If the transfer was a memset, free our temporary buffer */
|
|
if (desc->memset_buffer) {
|
|
dma_pool_free(atdma->memset_pool, desc->memset_vaddr,
|
|
desc->memset_paddr);
|
|
desc->memset_buffer = false;
|
|
}
|
|
|
|
/* move children to free_list */
|
|
list_splice_init(&desc->tx_list, &atchan->free_list);
|
|
/* move myself to free_list */
|
|
list_move(&desc->desc_node, &atchan->free_list);
|
|
|
|
dma_descriptor_unmap(txd);
|
|
/* for cyclic transfers,
|
|
* no need to replay callback function while stopping */
|
|
if (!atc_chan_is_cyclic(atchan)) {
|
|
/*
|
|
* The API requires that no submissions are done from a
|
|
* callback, so we don't need to drop the lock here
|
|
*/
|
|
dmaengine_desc_get_callback_invoke(txd, NULL);
|
|
}
|
|
|
|
dma_run_dependencies(txd);
|
|
}
|
|
|
|
/**
|
|
* atc_complete_all - finish work for all transactions
|
|
* @atchan: channel to complete transactions for
|
|
*
|
|
* Eventually submit queued descriptors if any
|
|
*
|
|
* Assume channel is idle while calling this function
|
|
* Called with atchan->lock held and bh disabled
|
|
*/
|
|
static void atc_complete_all(struct at_dma_chan *atchan)
|
|
{
|
|
struct at_desc *desc, *_desc;
|
|
LIST_HEAD(list);
|
|
|
|
dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
|
|
|
|
/*
|
|
* Submit queued descriptors ASAP, i.e. before we go through
|
|
* the completed ones.
|
|
*/
|
|
if (!list_empty(&atchan->queue))
|
|
atc_dostart(atchan, atc_first_queued(atchan));
|
|
/* empty active_list now it is completed */
|
|
list_splice_init(&atchan->active_list, &list);
|
|
/* empty queue list by moving descriptors (if any) to active_list */
|
|
list_splice_init(&atchan->queue, &atchan->active_list);
|
|
|
|
list_for_each_entry_safe(desc, _desc, &list, desc_node)
|
|
atc_chain_complete(atchan, desc);
|
|
}
|
|
|
|
/**
|
|
* atc_advance_work - at the end of a transaction, move forward
|
|
* @atchan: channel where the transaction ended
|
|
*
|
|
* Called with atchan->lock held and bh disabled
|
|
*/
|
|
static void atc_advance_work(struct at_dma_chan *atchan)
|
|
{
|
|
dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
|
|
|
|
if (atc_chan_is_enabled(atchan))
|
|
return;
|
|
|
|
if (list_empty(&atchan->active_list) ||
|
|
list_is_singular(&atchan->active_list)) {
|
|
atc_complete_all(atchan);
|
|
} else {
|
|
atc_chain_complete(atchan, atc_first_active(atchan));
|
|
/* advance work */
|
|
atc_dostart(atchan, atc_first_active(atchan));
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* atc_handle_error - handle errors reported by DMA controller
|
|
* @atchan: channel where error occurs
|
|
*
|
|
* Called with atchan->lock held and bh disabled
|
|
*/
|
|
static void atc_handle_error(struct at_dma_chan *atchan)
|
|
{
|
|
struct at_desc *bad_desc;
|
|
struct at_desc *child;
|
|
|
|
/*
|
|
* The descriptor currently at the head of the active list is
|
|
* broked. Since we don't have any way to report errors, we'll
|
|
* just have to scream loudly and try to carry on.
|
|
*/
|
|
bad_desc = atc_first_active(atchan);
|
|
list_del_init(&bad_desc->desc_node);
|
|
|
|
/* As we are stopped, take advantage to push queued descriptors
|
|
* in active_list */
|
|
list_splice_init(&atchan->queue, atchan->active_list.prev);
|
|
|
|
/* Try to restart the controller */
|
|
if (!list_empty(&atchan->active_list))
|
|
atc_dostart(atchan, atc_first_active(atchan));
|
|
|
|
/*
|
|
* KERN_CRITICAL may seem harsh, but since this only happens
|
|
* when someone submits a bad physical address in a
|
|
* descriptor, we should consider ourselves lucky that the
|
|
* controller flagged an error instead of scribbling over
|
|
* random memory locations.
|
|
*/
|
|
dev_crit(chan2dev(&atchan->chan_common),
|
|
"Bad descriptor submitted for DMA!\n");
|
|
dev_crit(chan2dev(&atchan->chan_common),
|
|
" cookie: %d\n", bad_desc->txd.cookie);
|
|
atc_dump_lli(atchan, &bad_desc->lli);
|
|
list_for_each_entry(child, &bad_desc->tx_list, desc_node)
|
|
atc_dump_lli(atchan, &child->lli);
|
|
|
|
/* Pretend the descriptor completed successfully */
|
|
atc_chain_complete(atchan, bad_desc);
|
|
}
|
|
|
|
/**
|
|
* atc_handle_cyclic - at the end of a period, run callback function
|
|
* @atchan: channel used for cyclic operations
|
|
*
|
|
* Called with atchan->lock held and bh disabled
|
|
*/
|
|
static void atc_handle_cyclic(struct at_dma_chan *atchan)
|
|
{
|
|
struct at_desc *first = atc_first_active(atchan);
|
|
struct dma_async_tx_descriptor *txd = &first->txd;
|
|
|
|
dev_vdbg(chan2dev(&atchan->chan_common),
|
|
"new cyclic period llp 0x%08x\n",
|
|
channel_readl(atchan, DSCR));
|
|
|
|
dmaengine_desc_get_callback_invoke(txd, NULL);
|
|
}
|
|
|
|
/*-- IRQ & Tasklet ---------------------------------------------------*/
|
|
|
|
static void atc_tasklet(unsigned long data)
|
|
{
|
|
struct at_dma_chan *atchan = (struct at_dma_chan *)data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status))
|
|
atc_handle_error(atchan);
|
|
else if (atc_chan_is_cyclic(atchan))
|
|
atc_handle_cyclic(atchan);
|
|
else
|
|
atc_advance_work(atchan);
|
|
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct at_dma *atdma = (struct at_dma *)dev_id;
|
|
struct at_dma_chan *atchan;
|
|
int i;
|
|
u32 status, pending, imr;
|
|
int ret = IRQ_NONE;
|
|
|
|
do {
|
|
imr = dma_readl(atdma, EBCIMR);
|
|
status = dma_readl(atdma, EBCISR);
|
|
pending = status & imr;
|
|
|
|
if (!pending)
|
|
break;
|
|
|
|
dev_vdbg(atdma->dma_common.dev,
|
|
"interrupt: status = 0x%08x, 0x%08x, 0x%08x\n",
|
|
status, imr, pending);
|
|
|
|
for (i = 0; i < atdma->dma_common.chancnt; i++) {
|
|
atchan = &atdma->chan[i];
|
|
if (pending & (AT_DMA_BTC(i) | AT_DMA_ERR(i))) {
|
|
if (pending & AT_DMA_ERR(i)) {
|
|
/* Disable channel on AHB error */
|
|
dma_writel(atdma, CHDR,
|
|
AT_DMA_RES(i) | atchan->mask);
|
|
/* Give information to tasklet */
|
|
set_bit(ATC_IS_ERROR, &atchan->status);
|
|
}
|
|
tasklet_schedule(&atchan->tasklet);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
} while (pending);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*-- DMA Engine API --------------------------------------------------*/
|
|
|
|
/**
|
|
* atc_tx_submit - set the prepared descriptor(s) to be executed by the engine
|
|
* @desc: descriptor at the head of the transaction chain
|
|
*
|
|
* Queue chain if DMA engine is working already
|
|
*
|
|
* Cookie increment and adding to active_list or queue must be atomic
|
|
*/
|
|
static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
struct at_desc *desc = txd_to_at_desc(tx);
|
|
struct at_dma_chan *atchan = to_at_dma_chan(tx->chan);
|
|
dma_cookie_t cookie;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
cookie = dma_cookie_assign(tx);
|
|
|
|
if (list_empty(&atchan->active_list)) {
|
|
dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n",
|
|
desc->txd.cookie);
|
|
atc_dostart(atchan, desc);
|
|
list_add_tail(&desc->desc_node, &atchan->active_list);
|
|
} else {
|
|
dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n",
|
|
desc->txd.cookie);
|
|
list_add_tail(&desc->desc_node, &atchan->queue);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
|
|
return cookie;
|
|
}
|
|
|
|
/**
|
|
* atc_prep_dma_interleaved - prepare memory to memory interleaved operation
|
|
* @chan: the channel to prepare operation on
|
|
* @xt: Interleaved transfer template
|
|
* @flags: tx descriptor status flags
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
atc_prep_dma_interleaved(struct dma_chan *chan,
|
|
struct dma_interleaved_template *xt,
|
|
unsigned long flags)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct data_chunk *first = xt->sgl;
|
|
struct at_desc *desc = NULL;
|
|
size_t xfer_count;
|
|
unsigned int dwidth;
|
|
u32 ctrla;
|
|
u32 ctrlb;
|
|
size_t len = 0;
|
|
int i;
|
|
|
|
if (unlikely(!xt || xt->numf != 1 || !xt->frame_size))
|
|
return NULL;
|
|
|
|
dev_info(chan2dev(chan),
|
|
"%s: src=%pad, dest=%pad, numf=%d, frame_size=%d, flags=0x%lx\n",
|
|
__func__, &xt->src_start, &xt->dst_start, xt->numf,
|
|
xt->frame_size, flags);
|
|
|
|
/*
|
|
* The controller can only "skip" X bytes every Y bytes, so we
|
|
* need to make sure we are given a template that fit that
|
|
* description, ie a template with chunks that always have the
|
|
* same size, with the same ICGs.
|
|
*/
|
|
for (i = 0; i < xt->frame_size; i++) {
|
|
struct data_chunk *chunk = xt->sgl + i;
|
|
|
|
if ((chunk->size != xt->sgl->size) ||
|
|
(dmaengine_get_dst_icg(xt, chunk) != dmaengine_get_dst_icg(xt, first)) ||
|
|
(dmaengine_get_src_icg(xt, chunk) != dmaengine_get_src_icg(xt, first))) {
|
|
dev_err(chan2dev(chan),
|
|
"%s: the controller can transfer only identical chunks\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
|
|
len += chunk->size;
|
|
}
|
|
|
|
dwidth = atc_get_xfer_width(xt->src_start,
|
|
xt->dst_start, len);
|
|
|
|
xfer_count = len >> dwidth;
|
|
if (xfer_count > ATC_BTSIZE_MAX) {
|
|
dev_err(chan2dev(chan), "%s: buffer is too big\n", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
ctrla = ATC_SRC_WIDTH(dwidth) |
|
|
ATC_DST_WIDTH(dwidth);
|
|
|
|
ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN
|
|
| ATC_SRC_ADDR_MODE_INCR
|
|
| ATC_DST_ADDR_MODE_INCR
|
|
| ATC_SRC_PIP
|
|
| ATC_DST_PIP
|
|
| ATC_FC_MEM2MEM;
|
|
|
|
/* create the transfer */
|
|
desc = atc_desc_get(atchan);
|
|
if (!desc) {
|
|
dev_err(chan2dev(chan),
|
|
"%s: couldn't allocate our descriptor\n", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
desc->lli.saddr = xt->src_start;
|
|
desc->lli.daddr = xt->dst_start;
|
|
desc->lli.ctrla = ctrla | xfer_count;
|
|
desc->lli.ctrlb = ctrlb;
|
|
|
|
desc->boundary = first->size >> dwidth;
|
|
desc->dst_hole = (dmaengine_get_dst_icg(xt, first) >> dwidth) + 1;
|
|
desc->src_hole = (dmaengine_get_src_icg(xt, first) >> dwidth) + 1;
|
|
|
|
desc->txd.cookie = -EBUSY;
|
|
desc->total_len = desc->len = len;
|
|
|
|
/* set end-of-link to the last link descriptor of list*/
|
|
set_desc_eol(desc);
|
|
|
|
desc->txd.flags = flags; /* client is in control of this ack */
|
|
|
|
return &desc->txd;
|
|
}
|
|
|
|
/**
|
|
* atc_prep_dma_memcpy - prepare a memcpy operation
|
|
* @chan: the channel to prepare operation on
|
|
* @dest: operation virtual destination address
|
|
* @src: operation virtual source address
|
|
* @len: operation length
|
|
* @flags: tx descriptor status flags
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
|
|
size_t len, unsigned long flags)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_desc *desc = NULL;
|
|
struct at_desc *first = NULL;
|
|
struct at_desc *prev = NULL;
|
|
size_t xfer_count;
|
|
size_t offset;
|
|
unsigned int src_width;
|
|
unsigned int dst_width;
|
|
u32 ctrla;
|
|
u32 ctrlb;
|
|
|
|
dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d%pad s%pad l0x%zx f0x%lx\n",
|
|
&dest, &src, len, flags);
|
|
|
|
if (unlikely(!len)) {
|
|
dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
|
|
return NULL;
|
|
}
|
|
|
|
ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN
|
|
| ATC_SRC_ADDR_MODE_INCR
|
|
| ATC_DST_ADDR_MODE_INCR
|
|
| ATC_FC_MEM2MEM;
|
|
|
|
/*
|
|
* We can be a lot more clever here, but this should take care
|
|
* of the most common optimization.
|
|
*/
|
|
src_width = dst_width = atc_get_xfer_width(src, dest, len);
|
|
|
|
ctrla = ATC_SRC_WIDTH(src_width) |
|
|
ATC_DST_WIDTH(dst_width);
|
|
|
|
for (offset = 0; offset < len; offset += xfer_count << src_width) {
|
|
xfer_count = min_t(size_t, (len - offset) >> src_width,
|
|
ATC_BTSIZE_MAX);
|
|
|
|
desc = atc_desc_get(atchan);
|
|
if (!desc)
|
|
goto err_desc_get;
|
|
|
|
desc->lli.saddr = src + offset;
|
|
desc->lli.daddr = dest + offset;
|
|
desc->lli.ctrla = ctrla | xfer_count;
|
|
desc->lli.ctrlb = ctrlb;
|
|
|
|
desc->txd.cookie = 0;
|
|
desc->len = xfer_count << src_width;
|
|
|
|
atc_desc_chain(&first, &prev, desc);
|
|
}
|
|
|
|
/* First descriptor of the chain embedds additional information */
|
|
first->txd.cookie = -EBUSY;
|
|
first->total_len = len;
|
|
|
|
/* set end-of-link to the last link descriptor of list*/
|
|
set_desc_eol(desc);
|
|
|
|
first->txd.flags = flags; /* client is in control of this ack */
|
|
|
|
return &first->txd;
|
|
|
|
err_desc_get:
|
|
atc_desc_put(atchan, first);
|
|
return NULL;
|
|
}
|
|
|
|
static struct at_desc *atc_create_memset_desc(struct dma_chan *chan,
|
|
dma_addr_t psrc,
|
|
dma_addr_t pdst,
|
|
size_t len)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_desc *desc;
|
|
size_t xfer_count;
|
|
|
|
u32 ctrla = ATC_SRC_WIDTH(2) | ATC_DST_WIDTH(2);
|
|
u32 ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN |
|
|
ATC_SRC_ADDR_MODE_FIXED |
|
|
ATC_DST_ADDR_MODE_INCR |
|
|
ATC_FC_MEM2MEM;
|
|
|
|
xfer_count = len >> 2;
|
|
if (xfer_count > ATC_BTSIZE_MAX) {
|
|
dev_err(chan2dev(chan), "%s: buffer is too big\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
|
|
desc = atc_desc_get(atchan);
|
|
if (!desc) {
|
|
dev_err(chan2dev(chan), "%s: can't get a descriptor\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
|
|
desc->lli.saddr = psrc;
|
|
desc->lli.daddr = pdst;
|
|
desc->lli.ctrla = ctrla | xfer_count;
|
|
desc->lli.ctrlb = ctrlb;
|
|
|
|
desc->txd.cookie = 0;
|
|
desc->len = len;
|
|
|
|
return desc;
|
|
}
|
|
|
|
/**
|
|
* atc_prep_dma_memset - prepare a memcpy operation
|
|
* @chan: the channel to prepare operation on
|
|
* @dest: operation virtual destination address
|
|
* @value: value to set memory buffer to
|
|
* @len: operation length
|
|
* @flags: tx descriptor status flags
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
atc_prep_dma_memset(struct dma_chan *chan, dma_addr_t dest, int value,
|
|
size_t len, unsigned long flags)
|
|
{
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
struct at_desc *desc;
|
|
void __iomem *vaddr;
|
|
dma_addr_t paddr;
|
|
|
|
dev_vdbg(chan2dev(chan), "%s: d%pad v0x%x l0x%zx f0x%lx\n", __func__,
|
|
&dest, value, len, flags);
|
|
|
|
if (unlikely(!len)) {
|
|
dev_dbg(chan2dev(chan), "%s: length is zero!\n", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
if (!is_dma_fill_aligned(chan->device, dest, 0, len)) {
|
|
dev_dbg(chan2dev(chan), "%s: buffer is not aligned\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
|
|
vaddr = dma_pool_alloc(atdma->memset_pool, GFP_ATOMIC, &paddr);
|
|
if (!vaddr) {
|
|
dev_err(chan2dev(chan), "%s: couldn't allocate buffer\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
*(u32*)vaddr = value;
|
|
|
|
desc = atc_create_memset_desc(chan, paddr, dest, len);
|
|
if (!desc) {
|
|
dev_err(chan2dev(chan), "%s: couldn't get a descriptor\n",
|
|
__func__);
|
|
goto err_free_buffer;
|
|
}
|
|
|
|
desc->memset_paddr = paddr;
|
|
desc->memset_vaddr = vaddr;
|
|
desc->memset_buffer = true;
|
|
|
|
desc->txd.cookie = -EBUSY;
|
|
desc->total_len = len;
|
|
|
|
/* set end-of-link on the descriptor */
|
|
set_desc_eol(desc);
|
|
|
|
desc->txd.flags = flags;
|
|
|
|
return &desc->txd;
|
|
|
|
err_free_buffer:
|
|
dma_pool_free(atdma->memset_pool, vaddr, paddr);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *
|
|
atc_prep_dma_memset_sg(struct dma_chan *chan,
|
|
struct scatterlist *sgl,
|
|
unsigned int sg_len, int value,
|
|
unsigned long flags)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
struct at_desc *desc = NULL, *first = NULL, *prev = NULL;
|
|
struct scatterlist *sg;
|
|
void __iomem *vaddr;
|
|
dma_addr_t paddr;
|
|
size_t total_len = 0;
|
|
int i;
|
|
|
|
dev_vdbg(chan2dev(chan), "%s: v0x%x l0x%zx f0x%lx\n", __func__,
|
|
value, sg_len, flags);
|
|
|
|
if (unlikely(!sgl || !sg_len)) {
|
|
dev_dbg(chan2dev(chan), "%s: scatterlist is empty!\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
|
|
vaddr = dma_pool_alloc(atdma->memset_pool, GFP_ATOMIC, &paddr);
|
|
if (!vaddr) {
|
|
dev_err(chan2dev(chan), "%s: couldn't allocate buffer\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
*(u32*)vaddr = value;
|
|
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
dma_addr_t dest = sg_dma_address(sg);
|
|
size_t len = sg_dma_len(sg);
|
|
|
|
dev_vdbg(chan2dev(chan), "%s: d%pad, l0x%zx\n",
|
|
__func__, &dest, len);
|
|
|
|
if (!is_dma_fill_aligned(chan->device, dest, 0, len)) {
|
|
dev_err(chan2dev(chan), "%s: buffer is not aligned\n",
|
|
__func__);
|
|
goto err_put_desc;
|
|
}
|
|
|
|
desc = atc_create_memset_desc(chan, paddr, dest, len);
|
|
if (!desc)
|
|
goto err_put_desc;
|
|
|
|
atc_desc_chain(&first, &prev, desc);
|
|
|
|
total_len += len;
|
|
}
|
|
|
|
/*
|
|
* Only set the buffer pointers on the last descriptor to
|
|
* avoid free'ing while we have our transfer still going
|
|
*/
|
|
desc->memset_paddr = paddr;
|
|
desc->memset_vaddr = vaddr;
|
|
desc->memset_buffer = true;
|
|
|
|
first->txd.cookie = -EBUSY;
|
|
first->total_len = total_len;
|
|
|
|
/* set end-of-link on the descriptor */
|
|
set_desc_eol(desc);
|
|
|
|
first->txd.flags = flags;
|
|
|
|
return &first->txd;
|
|
|
|
err_put_desc:
|
|
atc_desc_put(atchan, first);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
|
|
* @chan: DMA channel
|
|
* @sgl: scatterlist to transfer to/from
|
|
* @sg_len: number of entries in @scatterlist
|
|
* @direction: DMA direction
|
|
* @flags: tx descriptor status flags
|
|
* @context: transaction context (ignored)
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
|
|
unsigned int sg_len, enum dma_transfer_direction direction,
|
|
unsigned long flags, void *context)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma_slave *atslave = chan->private;
|
|
struct dma_slave_config *sconfig = &atchan->dma_sconfig;
|
|
struct at_desc *first = NULL;
|
|
struct at_desc *prev = NULL;
|
|
u32 ctrla;
|
|
u32 ctrlb;
|
|
dma_addr_t reg;
|
|
unsigned int reg_width;
|
|
unsigned int mem_width;
|
|
unsigned int i;
|
|
struct scatterlist *sg;
|
|
size_t total_len = 0;
|
|
|
|
dev_vdbg(chan2dev(chan), "prep_slave_sg (%d): %s f0x%lx\n",
|
|
sg_len,
|
|
direction == DMA_MEM_TO_DEV ? "TO DEVICE" : "FROM DEVICE",
|
|
flags);
|
|
|
|
if (unlikely(!atslave || !sg_len)) {
|
|
dev_dbg(chan2dev(chan), "prep_slave_sg: sg length is zero!\n");
|
|
return NULL;
|
|
}
|
|
|
|
ctrla = ATC_SCSIZE(sconfig->src_maxburst)
|
|
| ATC_DCSIZE(sconfig->dst_maxburst);
|
|
ctrlb = ATC_IEN;
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
reg_width = convert_buswidth(sconfig->dst_addr_width);
|
|
ctrla |= ATC_DST_WIDTH(reg_width);
|
|
ctrlb |= ATC_DST_ADDR_MODE_FIXED
|
|
| ATC_SRC_ADDR_MODE_INCR
|
|
| ATC_FC_MEM2PER
|
|
| ATC_SIF(atchan->mem_if) | ATC_DIF(atchan->per_if);
|
|
reg = sconfig->dst_addr;
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
struct at_desc *desc;
|
|
u32 len;
|
|
u32 mem;
|
|
|
|
desc = atc_desc_get(atchan);
|
|
if (!desc)
|
|
goto err_desc_get;
|
|
|
|
mem = sg_dma_address(sg);
|
|
len = sg_dma_len(sg);
|
|
if (unlikely(!len)) {
|
|
dev_dbg(chan2dev(chan),
|
|
"prep_slave_sg: sg(%d) data length is zero\n", i);
|
|
goto err;
|
|
}
|
|
mem_width = 2;
|
|
if (unlikely(mem & 3 || len & 3))
|
|
mem_width = 0;
|
|
|
|
desc->lli.saddr = mem;
|
|
desc->lli.daddr = reg;
|
|
desc->lli.ctrla = ctrla
|
|
| ATC_SRC_WIDTH(mem_width)
|
|
| len >> mem_width;
|
|
desc->lli.ctrlb = ctrlb;
|
|
desc->len = len;
|
|
|
|
atc_desc_chain(&first, &prev, desc);
|
|
total_len += len;
|
|
}
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
reg_width = convert_buswidth(sconfig->src_addr_width);
|
|
ctrla |= ATC_SRC_WIDTH(reg_width);
|
|
ctrlb |= ATC_DST_ADDR_MODE_INCR
|
|
| ATC_SRC_ADDR_MODE_FIXED
|
|
| ATC_FC_PER2MEM
|
|
| ATC_SIF(atchan->per_if) | ATC_DIF(atchan->mem_if);
|
|
|
|
reg = sconfig->src_addr;
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
struct at_desc *desc;
|
|
u32 len;
|
|
u32 mem;
|
|
|
|
desc = atc_desc_get(atchan);
|
|
if (!desc)
|
|
goto err_desc_get;
|
|
|
|
mem = sg_dma_address(sg);
|
|
len = sg_dma_len(sg);
|
|
if (unlikely(!len)) {
|
|
dev_dbg(chan2dev(chan),
|
|
"prep_slave_sg: sg(%d) data length is zero\n", i);
|
|
goto err;
|
|
}
|
|
mem_width = 2;
|
|
if (unlikely(mem & 3 || len & 3))
|
|
mem_width = 0;
|
|
|
|
desc->lli.saddr = reg;
|
|
desc->lli.daddr = mem;
|
|
desc->lli.ctrla = ctrla
|
|
| ATC_DST_WIDTH(mem_width)
|
|
| len >> reg_width;
|
|
desc->lli.ctrlb = ctrlb;
|
|
desc->len = len;
|
|
|
|
atc_desc_chain(&first, &prev, desc);
|
|
total_len += len;
|
|
}
|
|
break;
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
/* set end-of-link to the last link descriptor of list*/
|
|
set_desc_eol(prev);
|
|
|
|
/* First descriptor of the chain embedds additional information */
|
|
first->txd.cookie = -EBUSY;
|
|
first->total_len = total_len;
|
|
|
|
/* first link descriptor of list is responsible of flags */
|
|
first->txd.flags = flags; /* client is in control of this ack */
|
|
|
|
return &first->txd;
|
|
|
|
err_desc_get:
|
|
dev_err(chan2dev(chan), "not enough descriptors available\n");
|
|
err:
|
|
atc_desc_put(atchan, first);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* atc_dma_cyclic_check_values
|
|
* Check for too big/unaligned periods and unaligned DMA buffer
|
|
*/
|
|
static int
|
|
atc_dma_cyclic_check_values(unsigned int reg_width, dma_addr_t buf_addr,
|
|
size_t period_len)
|
|
{
|
|
if (period_len > (ATC_BTSIZE_MAX << reg_width))
|
|
goto err_out;
|
|
if (unlikely(period_len & ((1 << reg_width) - 1)))
|
|
goto err_out;
|
|
if (unlikely(buf_addr & ((1 << reg_width) - 1)))
|
|
goto err_out;
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* atc_dma_cyclic_fill_desc - Fill one period descriptor
|
|
*/
|
|
static int
|
|
atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
|
|
unsigned int period_index, dma_addr_t buf_addr,
|
|
unsigned int reg_width, size_t period_len,
|
|
enum dma_transfer_direction direction)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct dma_slave_config *sconfig = &atchan->dma_sconfig;
|
|
u32 ctrla;
|
|
|
|
/* prepare common CRTLA value */
|
|
ctrla = ATC_SCSIZE(sconfig->src_maxburst)
|
|
| ATC_DCSIZE(sconfig->dst_maxburst)
|
|
| ATC_DST_WIDTH(reg_width)
|
|
| ATC_SRC_WIDTH(reg_width)
|
|
| period_len >> reg_width;
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
desc->lli.saddr = buf_addr + (period_len * period_index);
|
|
desc->lli.daddr = sconfig->dst_addr;
|
|
desc->lli.ctrla = ctrla;
|
|
desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED
|
|
| ATC_SRC_ADDR_MODE_INCR
|
|
| ATC_FC_MEM2PER
|
|
| ATC_SIF(atchan->mem_if)
|
|
| ATC_DIF(atchan->per_if);
|
|
desc->len = period_len;
|
|
break;
|
|
|
|
case DMA_DEV_TO_MEM:
|
|
desc->lli.saddr = sconfig->src_addr;
|
|
desc->lli.daddr = buf_addr + (period_len * period_index);
|
|
desc->lli.ctrla = ctrla;
|
|
desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR
|
|
| ATC_SRC_ADDR_MODE_FIXED
|
|
| ATC_FC_PER2MEM
|
|
| ATC_SIF(atchan->per_if)
|
|
| ATC_DIF(atchan->mem_if);
|
|
desc->len = period_len;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* atc_prep_dma_cyclic - prepare the cyclic DMA transfer
|
|
* @chan: the DMA channel to prepare
|
|
* @buf_addr: physical DMA address where the buffer starts
|
|
* @buf_len: total number of bytes for the entire buffer
|
|
* @period_len: number of bytes for each period
|
|
* @direction: transfer direction, to or from device
|
|
* @flags: tx descriptor status flags
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
|
|
size_t period_len, enum dma_transfer_direction direction,
|
|
unsigned long flags)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma_slave *atslave = chan->private;
|
|
struct dma_slave_config *sconfig = &atchan->dma_sconfig;
|
|
struct at_desc *first = NULL;
|
|
struct at_desc *prev = NULL;
|
|
unsigned long was_cyclic;
|
|
unsigned int reg_width;
|
|
unsigned int periods = buf_len / period_len;
|
|
unsigned int i;
|
|
|
|
dev_vdbg(chan2dev(chan), "prep_dma_cyclic: %s buf@%pad - %d (%d/%d)\n",
|
|
direction == DMA_MEM_TO_DEV ? "TO DEVICE" : "FROM DEVICE",
|
|
&buf_addr,
|
|
periods, buf_len, period_len);
|
|
|
|
if (unlikely(!atslave || !buf_len || !period_len)) {
|
|
dev_dbg(chan2dev(chan), "prep_dma_cyclic: length is zero!\n");
|
|
return NULL;
|
|
}
|
|
|
|
was_cyclic = test_and_set_bit(ATC_IS_CYCLIC, &atchan->status);
|
|
if (was_cyclic) {
|
|
dev_dbg(chan2dev(chan), "prep_dma_cyclic: channel in use!\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (unlikely(!is_slave_direction(direction)))
|
|
goto err_out;
|
|
|
|
if (sconfig->direction == DMA_MEM_TO_DEV)
|
|
reg_width = convert_buswidth(sconfig->dst_addr_width);
|
|
else
|
|
reg_width = convert_buswidth(sconfig->src_addr_width);
|
|
|
|
/* Check for too big/unaligned periods and unaligned DMA buffer */
|
|
if (atc_dma_cyclic_check_values(reg_width, buf_addr, period_len))
|
|
goto err_out;
|
|
|
|
/* build cyclic linked list */
|
|
for (i = 0; i < periods; i++) {
|
|
struct at_desc *desc;
|
|
|
|
desc = atc_desc_get(atchan);
|
|
if (!desc)
|
|
goto err_desc_get;
|
|
|
|
if (atc_dma_cyclic_fill_desc(chan, desc, i, buf_addr,
|
|
reg_width, period_len, direction))
|
|
goto err_desc_get;
|
|
|
|
atc_desc_chain(&first, &prev, desc);
|
|
}
|
|
|
|
/* lets make a cyclic list */
|
|
prev->lli.dscr = first->txd.phys;
|
|
|
|
/* First descriptor of the chain embedds additional information */
|
|
first->txd.cookie = -EBUSY;
|
|
first->total_len = buf_len;
|
|
|
|
return &first->txd;
|
|
|
|
err_desc_get:
|
|
dev_err(chan2dev(chan), "not enough descriptors available\n");
|
|
atc_desc_put(atchan, first);
|
|
err_out:
|
|
clear_bit(ATC_IS_CYCLIC, &atchan->status);
|
|
return NULL;
|
|
}
|
|
|
|
static int atc_config(struct dma_chan *chan,
|
|
struct dma_slave_config *sconfig)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
|
|
dev_vdbg(chan2dev(chan), "%s\n", __func__);
|
|
|
|
/* Check if it is chan is configured for slave transfers */
|
|
if (!chan->private)
|
|
return -EINVAL;
|
|
|
|
memcpy(&atchan->dma_sconfig, sconfig, sizeof(*sconfig));
|
|
|
|
convert_burst(&atchan->dma_sconfig.src_maxburst);
|
|
convert_burst(&atchan->dma_sconfig.dst_maxburst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atc_pause(struct dma_chan *chan)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
int chan_id = atchan->chan_common.chan_id;
|
|
unsigned long flags;
|
|
|
|
LIST_HEAD(list);
|
|
|
|
dev_vdbg(chan2dev(chan), "%s\n", __func__);
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
|
|
dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
|
|
set_bit(ATC_IS_PAUSED, &atchan->status);
|
|
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atc_resume(struct dma_chan *chan)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
int chan_id = atchan->chan_common.chan_id;
|
|
unsigned long flags;
|
|
|
|
LIST_HEAD(list);
|
|
|
|
dev_vdbg(chan2dev(chan), "%s\n", __func__);
|
|
|
|
if (!atc_chan_is_paused(atchan))
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
|
|
dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
|
|
clear_bit(ATC_IS_PAUSED, &atchan->status);
|
|
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atc_terminate_all(struct dma_chan *chan)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
int chan_id = atchan->chan_common.chan_id;
|
|
struct at_desc *desc, *_desc;
|
|
unsigned long flags;
|
|
|
|
LIST_HEAD(list);
|
|
|
|
dev_vdbg(chan2dev(chan), "%s\n", __func__);
|
|
|
|
/*
|
|
* This is only called when something went wrong elsewhere, so
|
|
* we don't really care about the data. Just disable the
|
|
* channel. We still have to poll the channel enable bit due
|
|
* to AHB/HSB limitations.
|
|
*/
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
|
|
/* disabling channel: must also remove suspend state */
|
|
dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
|
|
|
|
/* confirm that this channel is disabled */
|
|
while (dma_readl(atdma, CHSR) & atchan->mask)
|
|
cpu_relax();
|
|
|
|
/* active_list entries will end up before queued entries */
|
|
list_splice_init(&atchan->queue, &list);
|
|
list_splice_init(&atchan->active_list, &list);
|
|
|
|
/* Flush all pending and queued descriptors */
|
|
list_for_each_entry_safe(desc, _desc, &list, desc_node)
|
|
atc_chain_complete(atchan, desc);
|
|
|
|
clear_bit(ATC_IS_PAUSED, &atchan->status);
|
|
/* if channel dedicated to cyclic operations, free it */
|
|
clear_bit(ATC_IS_CYCLIC, &atchan->status);
|
|
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* atc_tx_status - poll for transaction completion
|
|
* @chan: DMA channel
|
|
* @cookie: transaction identifier to check status of
|
|
* @txstate: if not %NULL updated with transaction state
|
|
*
|
|
* If @txstate is passed in, upon return it reflect the driver
|
|
* internal state and can be used with dma_async_is_complete() to check
|
|
* the status of multiple cookies without re-checking hardware state.
|
|
*/
|
|
static enum dma_status
|
|
atc_tx_status(struct dma_chan *chan,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *txstate)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
unsigned long flags;
|
|
enum dma_status ret;
|
|
int bytes = 0;
|
|
|
|
ret = dma_cookie_status(chan, cookie, txstate);
|
|
if (ret == DMA_COMPLETE)
|
|
return ret;
|
|
/*
|
|
* There's no point calculating the residue if there's
|
|
* no txstate to store the value.
|
|
*/
|
|
if (!txstate)
|
|
return DMA_ERROR;
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
|
|
/* Get number of bytes left in the active transactions */
|
|
bytes = atc_get_bytes_left(chan, cookie);
|
|
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
|
|
if (unlikely(bytes < 0)) {
|
|
dev_vdbg(chan2dev(chan), "get residual bytes error\n");
|
|
return DMA_ERROR;
|
|
} else {
|
|
dma_set_residue(txstate, bytes);
|
|
}
|
|
|
|
dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d residue = %d\n",
|
|
ret, cookie, bytes);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* atc_issue_pending - try to finish work
|
|
* @chan: target DMA channel
|
|
*/
|
|
static void atc_issue_pending(struct dma_chan *chan)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
unsigned long flags;
|
|
|
|
dev_vdbg(chan2dev(chan), "issue_pending\n");
|
|
|
|
/* Not needed for cyclic transfers */
|
|
if (atc_chan_is_cyclic(atchan))
|
|
return;
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
atc_advance_work(atchan);
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* atc_alloc_chan_resources - allocate resources for DMA channel
|
|
* @chan: allocate descriptor resources for this channel
|
|
* @client: current client requesting the channel be ready for requests
|
|
*
|
|
* return - the number of allocated descriptors
|
|
*/
|
|
static int atc_alloc_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
struct at_desc *desc;
|
|
struct at_dma_slave *atslave;
|
|
unsigned long flags;
|
|
int i;
|
|
u32 cfg;
|
|
LIST_HEAD(tmp_list);
|
|
|
|
dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
|
|
|
|
/* ASSERT: channel is idle */
|
|
if (atc_chan_is_enabled(atchan)) {
|
|
dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
|
|
return -EIO;
|
|
}
|
|
|
|
cfg = ATC_DEFAULT_CFG;
|
|
|
|
atslave = chan->private;
|
|
if (atslave) {
|
|
/*
|
|
* We need controller-specific data to set up slave
|
|
* transfers.
|
|
*/
|
|
BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev);
|
|
|
|
/* if cfg configuration specified take it instead of default */
|
|
if (atslave->cfg)
|
|
cfg = atslave->cfg;
|
|
}
|
|
|
|
/* have we already been set up?
|
|
* reconfigure channel but no need to reallocate descriptors */
|
|
if (!list_empty(&atchan->free_list))
|
|
return atchan->descs_allocated;
|
|
|
|
/* Allocate initial pool of descriptors */
|
|
for (i = 0; i < init_nr_desc_per_channel; i++) {
|
|
desc = atc_alloc_descriptor(chan, GFP_KERNEL);
|
|
if (!desc) {
|
|
dev_err(atdma->dma_common.dev,
|
|
"Only %d initial descriptors\n", i);
|
|
break;
|
|
}
|
|
list_add_tail(&desc->desc_node, &tmp_list);
|
|
}
|
|
|
|
spin_lock_irqsave(&atchan->lock, flags);
|
|
atchan->descs_allocated = i;
|
|
list_splice(&tmp_list, &atchan->free_list);
|
|
dma_cookie_init(chan);
|
|
spin_unlock_irqrestore(&atchan->lock, flags);
|
|
|
|
/* channel parameters */
|
|
channel_writel(atchan, CFG, cfg);
|
|
|
|
dev_dbg(chan2dev(chan),
|
|
"alloc_chan_resources: allocated %d descriptors\n",
|
|
atchan->descs_allocated);
|
|
|
|
return atchan->descs_allocated;
|
|
}
|
|
|
|
/**
|
|
* atc_free_chan_resources - free all channel resources
|
|
* @chan: DMA channel
|
|
*/
|
|
static void atc_free_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
struct at_dma *atdma = to_at_dma(chan->device);
|
|
struct at_desc *desc, *_desc;
|
|
LIST_HEAD(list);
|
|
|
|
dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
|
|
atchan->descs_allocated);
|
|
|
|
/* ASSERT: channel is idle */
|
|
BUG_ON(!list_empty(&atchan->active_list));
|
|
BUG_ON(!list_empty(&atchan->queue));
|
|
BUG_ON(atc_chan_is_enabled(atchan));
|
|
|
|
list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
|
|
dev_vdbg(chan2dev(chan), " freeing descriptor %p\n", desc);
|
|
list_del(&desc->desc_node);
|
|
/* free link descriptor */
|
|
dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
|
|
}
|
|
list_splice_init(&atchan->free_list, &list);
|
|
atchan->descs_allocated = 0;
|
|
atchan->status = 0;
|
|
|
|
dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static bool at_dma_filter(struct dma_chan *chan, void *slave)
|
|
{
|
|
struct at_dma_slave *atslave = slave;
|
|
|
|
if (atslave->dma_dev == chan->device->dev) {
|
|
chan->private = atslave;
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *of_dma)
|
|
{
|
|
struct dma_chan *chan;
|
|
struct at_dma_chan *atchan;
|
|
struct at_dma_slave *atslave;
|
|
dma_cap_mask_t mask;
|
|
unsigned int per_id;
|
|
struct platform_device *dmac_pdev;
|
|
|
|
if (dma_spec->args_count != 2)
|
|
return NULL;
|
|
|
|
dmac_pdev = of_find_device_by_node(dma_spec->np);
|
|
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
|
|
atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
|
|
if (!atslave)
|
|
return NULL;
|
|
|
|
atslave->cfg = ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW;
|
|
/*
|
|
* We can fill both SRC_PER and DST_PER, one of these fields will be
|
|
* ignored depending on DMA transfer direction.
|
|
*/
|
|
per_id = dma_spec->args[1] & AT91_DMA_CFG_PER_ID_MASK;
|
|
atslave->cfg |= ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id)
|
|
| ATC_SRC_PER_MSB(per_id) | ATC_SRC_PER(per_id);
|
|
/*
|
|
* We have to translate the value we get from the device tree since
|
|
* the half FIFO configuration value had to be 0 to keep backward
|
|
* compatibility.
|
|
*/
|
|
switch (dma_spec->args[1] & AT91_DMA_CFG_FIFOCFG_MASK) {
|
|
case AT91_DMA_CFG_FIFOCFG_ALAP:
|
|
atslave->cfg |= ATC_FIFOCFG_LARGESTBURST;
|
|
break;
|
|
case AT91_DMA_CFG_FIFOCFG_ASAP:
|
|
atslave->cfg |= ATC_FIFOCFG_ENOUGHSPACE;
|
|
break;
|
|
case AT91_DMA_CFG_FIFOCFG_HALF:
|
|
default:
|
|
atslave->cfg |= ATC_FIFOCFG_HALFFIFO;
|
|
}
|
|
atslave->dma_dev = &dmac_pdev->dev;
|
|
|
|
chan = dma_request_channel(mask, at_dma_filter, atslave);
|
|
if (!chan)
|
|
return NULL;
|
|
|
|
atchan = to_at_dma_chan(chan);
|
|
atchan->per_if = dma_spec->args[0] & 0xff;
|
|
atchan->mem_if = (dma_spec->args[0] >> 16) & 0xff;
|
|
|
|
return chan;
|
|
}
|
|
#else
|
|
static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *of_dma)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
/*-- Module Management -----------------------------------------------*/
|
|
|
|
/* cap_mask is a multi-u32 bitfield, fill it with proper C code. */
|
|
static struct at_dma_platform_data at91sam9rl_config = {
|
|
.nr_channels = 2,
|
|
};
|
|
static struct at_dma_platform_data at91sam9g45_config = {
|
|
.nr_channels = 8,
|
|
};
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id atmel_dma_dt_ids[] = {
|
|
{
|
|
.compatible = "atmel,at91sam9rl-dma",
|
|
.data = &at91sam9rl_config,
|
|
}, {
|
|
.compatible = "atmel,at91sam9g45-dma",
|
|
.data = &at91sam9g45_config,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, atmel_dma_dt_ids);
|
|
#endif
|
|
|
|
static const struct platform_device_id atdma_devtypes[] = {
|
|
{
|
|
.name = "at91sam9rl_dma",
|
|
.driver_data = (unsigned long) &at91sam9rl_config,
|
|
}, {
|
|
.name = "at91sam9g45_dma",
|
|
.driver_data = (unsigned long) &at91sam9g45_config,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
|
|
static inline const struct at_dma_platform_data * __init at_dma_get_driver_data(
|
|
struct platform_device *pdev)
|
|
{
|
|
if (pdev->dev.of_node) {
|
|
const struct of_device_id *match;
|
|
match = of_match_node(atmel_dma_dt_ids, pdev->dev.of_node);
|
|
if (match == NULL)
|
|
return NULL;
|
|
return match->data;
|
|
}
|
|
return (struct at_dma_platform_data *)
|
|
platform_get_device_id(pdev)->driver_data;
|
|
}
|
|
|
|
/**
|
|
* at_dma_off - disable DMA controller
|
|
* @atdma: the Atmel HDAMC device
|
|
*/
|
|
static void at_dma_off(struct at_dma *atdma)
|
|
{
|
|
dma_writel(atdma, EN, 0);
|
|
|
|
/* disable all interrupts */
|
|
dma_writel(atdma, EBCIDR, -1L);
|
|
|
|
/* confirm that all channels are disabled */
|
|
while (dma_readl(atdma, CHSR) & atdma->all_chan_mask)
|
|
cpu_relax();
|
|
}
|
|
|
|
static int __init at_dma_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *io;
|
|
struct at_dma *atdma;
|
|
size_t size;
|
|
int irq;
|
|
int err;
|
|
int i;
|
|
const struct at_dma_platform_data *plat_dat;
|
|
|
|
/* setup platform data for each SoC */
|
|
dma_cap_set(DMA_MEMCPY, at91sam9rl_config.cap_mask);
|
|
dma_cap_set(DMA_INTERLEAVE, at91sam9g45_config.cap_mask);
|
|
dma_cap_set(DMA_MEMCPY, at91sam9g45_config.cap_mask);
|
|
dma_cap_set(DMA_MEMSET, at91sam9g45_config.cap_mask);
|
|
dma_cap_set(DMA_MEMSET_SG, at91sam9g45_config.cap_mask);
|
|
dma_cap_set(DMA_PRIVATE, at91sam9g45_config.cap_mask);
|
|
dma_cap_set(DMA_SLAVE, at91sam9g45_config.cap_mask);
|
|
|
|
/* get DMA parameters from controller type */
|
|
plat_dat = at_dma_get_driver_data(pdev);
|
|
if (!plat_dat)
|
|
return -ENODEV;
|
|
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!io)
|
|
return -EINVAL;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
size = sizeof(struct at_dma);
|
|
size += plat_dat->nr_channels * sizeof(struct at_dma_chan);
|
|
atdma = kzalloc(size, GFP_KERNEL);
|
|
if (!atdma)
|
|
return -ENOMEM;
|
|
|
|
/* discover transaction capabilities */
|
|
atdma->dma_common.cap_mask = plat_dat->cap_mask;
|
|
atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1;
|
|
|
|
size = resource_size(io);
|
|
if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
|
|
err = -EBUSY;
|
|
goto err_kfree;
|
|
}
|
|
|
|
atdma->regs = ioremap(io->start, size);
|
|
if (!atdma->regs) {
|
|
err = -ENOMEM;
|
|
goto err_release_r;
|
|
}
|
|
|
|
atdma->clk = clk_get(&pdev->dev, "dma_clk");
|
|
if (IS_ERR(atdma->clk)) {
|
|
err = PTR_ERR(atdma->clk);
|
|
goto err_clk;
|
|
}
|
|
err = clk_prepare_enable(atdma->clk);
|
|
if (err)
|
|
goto err_clk_prepare;
|
|
|
|
/* force dma off, just in case */
|
|
at_dma_off(atdma);
|
|
|
|
err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
|
|
if (err)
|
|
goto err_irq;
|
|
|
|
platform_set_drvdata(pdev, atdma);
|
|
|
|
/* create a pool of consistent memory blocks for hardware descriptors */
|
|
atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool",
|
|
&pdev->dev, sizeof(struct at_desc),
|
|
4 /* word alignment */, 0);
|
|
if (!atdma->dma_desc_pool) {
|
|
dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
|
|
err = -ENOMEM;
|
|
goto err_desc_pool_create;
|
|
}
|
|
|
|
/* create a pool of consistent memory blocks for memset blocks */
|
|
atdma->memset_pool = dma_pool_create("at_hdmac_memset_pool",
|
|
&pdev->dev, sizeof(int), 4, 0);
|
|
if (!atdma->memset_pool) {
|
|
dev_err(&pdev->dev, "No memory for memset dma pool\n");
|
|
err = -ENOMEM;
|
|
goto err_memset_pool_create;
|
|
}
|
|
|
|
/* clear any pending interrupt */
|
|
while (dma_readl(atdma, EBCISR))
|
|
cpu_relax();
|
|
|
|
/* initialize channels related values */
|
|
INIT_LIST_HEAD(&atdma->dma_common.channels);
|
|
for (i = 0; i < plat_dat->nr_channels; i++) {
|
|
struct at_dma_chan *atchan = &atdma->chan[i];
|
|
|
|
atchan->mem_if = AT_DMA_MEM_IF;
|
|
atchan->per_if = AT_DMA_PER_IF;
|
|
atchan->chan_common.device = &atdma->dma_common;
|
|
dma_cookie_init(&atchan->chan_common);
|
|
list_add_tail(&atchan->chan_common.device_node,
|
|
&atdma->dma_common.channels);
|
|
|
|
atchan->ch_regs = atdma->regs + ch_regs(i);
|
|
spin_lock_init(&atchan->lock);
|
|
atchan->mask = 1 << i;
|
|
|
|
INIT_LIST_HEAD(&atchan->active_list);
|
|
INIT_LIST_HEAD(&atchan->queue);
|
|
INIT_LIST_HEAD(&atchan->free_list);
|
|
|
|
tasklet_init(&atchan->tasklet, atc_tasklet,
|
|
(unsigned long)atchan);
|
|
atc_enable_chan_irq(atdma, i);
|
|
}
|
|
|
|
/* set base routines */
|
|
atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources;
|
|
atdma->dma_common.device_free_chan_resources = atc_free_chan_resources;
|
|
atdma->dma_common.device_tx_status = atc_tx_status;
|
|
atdma->dma_common.device_issue_pending = atc_issue_pending;
|
|
atdma->dma_common.dev = &pdev->dev;
|
|
|
|
/* set prep routines based on capability */
|
|
if (dma_has_cap(DMA_INTERLEAVE, atdma->dma_common.cap_mask))
|
|
atdma->dma_common.device_prep_interleaved_dma = atc_prep_dma_interleaved;
|
|
|
|
if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
|
|
atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
|
|
|
|
if (dma_has_cap(DMA_MEMSET, atdma->dma_common.cap_mask)) {
|
|
atdma->dma_common.device_prep_dma_memset = atc_prep_dma_memset;
|
|
atdma->dma_common.device_prep_dma_memset_sg = atc_prep_dma_memset_sg;
|
|
atdma->dma_common.fill_align = DMAENGINE_ALIGN_4_BYTES;
|
|
}
|
|
|
|
if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
|
|
atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
|
|
/* controller can do slave DMA: can trigger cyclic transfers */
|
|
dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask);
|
|
atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic;
|
|
atdma->dma_common.device_config = atc_config;
|
|
atdma->dma_common.device_pause = atc_pause;
|
|
atdma->dma_common.device_resume = atc_resume;
|
|
atdma->dma_common.device_terminate_all = atc_terminate_all;
|
|
atdma->dma_common.src_addr_widths = ATC_DMA_BUSWIDTHS;
|
|
atdma->dma_common.dst_addr_widths = ATC_DMA_BUSWIDTHS;
|
|
atdma->dma_common.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
|
|
atdma->dma_common.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
|
|
}
|
|
|
|
dma_writel(atdma, EN, AT_DMA_ENABLE);
|
|
|
|
dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s%s), %d channels\n",
|
|
dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
|
|
dma_has_cap(DMA_MEMSET, atdma->dma_common.cap_mask) ? "set " : "",
|
|
dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ? "slave " : "",
|
|
plat_dat->nr_channels);
|
|
|
|
dma_async_device_register(&atdma->dma_common);
|
|
|
|
/*
|
|
* Do not return an error if the dmac node is not present in order to
|
|
* not break the existing way of requesting channel with
|
|
* dma_request_channel().
|
|
*/
|
|
if (pdev->dev.of_node) {
|
|
err = of_dma_controller_register(pdev->dev.of_node,
|
|
at_dma_xlate, atdma);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "could not register of_dma_controller\n");
|
|
goto err_of_dma_controller_register;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_of_dma_controller_register:
|
|
dma_async_device_unregister(&atdma->dma_common);
|
|
dma_pool_destroy(atdma->memset_pool);
|
|
err_memset_pool_create:
|
|
dma_pool_destroy(atdma->dma_desc_pool);
|
|
err_desc_pool_create:
|
|
free_irq(platform_get_irq(pdev, 0), atdma);
|
|
err_irq:
|
|
clk_disable_unprepare(atdma->clk);
|
|
err_clk_prepare:
|
|
clk_put(atdma->clk);
|
|
err_clk:
|
|
iounmap(atdma->regs);
|
|
atdma->regs = NULL;
|
|
err_release_r:
|
|
release_mem_region(io->start, size);
|
|
err_kfree:
|
|
kfree(atdma);
|
|
return err;
|
|
}
|
|
|
|
static int at_dma_remove(struct platform_device *pdev)
|
|
{
|
|
struct at_dma *atdma = platform_get_drvdata(pdev);
|
|
struct dma_chan *chan, *_chan;
|
|
struct resource *io;
|
|
|
|
at_dma_off(atdma);
|
|
dma_async_device_unregister(&atdma->dma_common);
|
|
|
|
dma_pool_destroy(atdma->memset_pool);
|
|
dma_pool_destroy(atdma->dma_desc_pool);
|
|
free_irq(platform_get_irq(pdev, 0), atdma);
|
|
|
|
list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
|
|
device_node) {
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
|
|
/* Disable interrupts */
|
|
atc_disable_chan_irq(atdma, chan->chan_id);
|
|
|
|
tasklet_kill(&atchan->tasklet);
|
|
list_del(&chan->device_node);
|
|
}
|
|
|
|
clk_disable_unprepare(atdma->clk);
|
|
clk_put(atdma->clk);
|
|
|
|
iounmap(atdma->regs);
|
|
atdma->regs = NULL;
|
|
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(io->start, resource_size(io));
|
|
|
|
kfree(atdma);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at_dma_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct at_dma *atdma = platform_get_drvdata(pdev);
|
|
|
|
at_dma_off(platform_get_drvdata(pdev));
|
|
clk_disable_unprepare(atdma->clk);
|
|
}
|
|
|
|
static int at_dma_prepare(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct at_dma *atdma = platform_get_drvdata(pdev);
|
|
struct dma_chan *chan, *_chan;
|
|
|
|
list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
|
|
device_node) {
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
/* wait for transaction completion (except in cyclic case) */
|
|
if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan))
|
|
return -EAGAIN;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void atc_suspend_cyclic(struct at_dma_chan *atchan)
|
|
{
|
|
struct dma_chan *chan = &atchan->chan_common;
|
|
|
|
/* Channel should be paused by user
|
|
* do it anyway even if it is not done already */
|
|
if (!atc_chan_is_paused(atchan)) {
|
|
dev_warn(chan2dev(chan),
|
|
"cyclic channel not paused, should be done by channel user\n");
|
|
atc_pause(chan);
|
|
}
|
|
|
|
/* now preserve additional data for cyclic operations */
|
|
/* next descriptor address in the cyclic list */
|
|
atchan->save_dscr = channel_readl(atchan, DSCR);
|
|
|
|
vdbg_dump_regs(atchan);
|
|
}
|
|
|
|
static int at_dma_suspend_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct at_dma *atdma = platform_get_drvdata(pdev);
|
|
struct dma_chan *chan, *_chan;
|
|
|
|
/* preserve data */
|
|
list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
|
|
device_node) {
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
|
|
if (atc_chan_is_cyclic(atchan))
|
|
atc_suspend_cyclic(atchan);
|
|
atchan->save_cfg = channel_readl(atchan, CFG);
|
|
}
|
|
atdma->save_imr = dma_readl(atdma, EBCIMR);
|
|
|
|
/* disable DMA controller */
|
|
at_dma_off(atdma);
|
|
clk_disable_unprepare(atdma->clk);
|
|
return 0;
|
|
}
|
|
|
|
static void atc_resume_cyclic(struct at_dma_chan *atchan)
|
|
{
|
|
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
|
|
|
|
/* restore channel status for cyclic descriptors list:
|
|
* next descriptor in the cyclic list at the time of suspend */
|
|
channel_writel(atchan, SADDR, 0);
|
|
channel_writel(atchan, DADDR, 0);
|
|
channel_writel(atchan, CTRLA, 0);
|
|
channel_writel(atchan, CTRLB, 0);
|
|
channel_writel(atchan, DSCR, atchan->save_dscr);
|
|
dma_writel(atdma, CHER, atchan->mask);
|
|
|
|
/* channel pause status should be removed by channel user
|
|
* We cannot take the initiative to do it here */
|
|
|
|
vdbg_dump_regs(atchan);
|
|
}
|
|
|
|
static int at_dma_resume_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct at_dma *atdma = platform_get_drvdata(pdev);
|
|
struct dma_chan *chan, *_chan;
|
|
|
|
/* bring back DMA controller */
|
|
clk_prepare_enable(atdma->clk);
|
|
dma_writel(atdma, EN, AT_DMA_ENABLE);
|
|
|
|
/* clear any pending interrupt */
|
|
while (dma_readl(atdma, EBCISR))
|
|
cpu_relax();
|
|
|
|
/* restore saved data */
|
|
dma_writel(atdma, EBCIER, atdma->save_imr);
|
|
list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
|
|
device_node) {
|
|
struct at_dma_chan *atchan = to_at_dma_chan(chan);
|
|
|
|
channel_writel(atchan, CFG, atchan->save_cfg);
|
|
if (atc_chan_is_cyclic(atchan))
|
|
atc_resume_cyclic(atchan);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops at_dma_dev_pm_ops = {
|
|
.prepare = at_dma_prepare,
|
|
.suspend_noirq = at_dma_suspend_noirq,
|
|
.resume_noirq = at_dma_resume_noirq,
|
|
};
|
|
|
|
static struct platform_driver at_dma_driver = {
|
|
.remove = at_dma_remove,
|
|
.shutdown = at_dma_shutdown,
|
|
.id_table = atdma_devtypes,
|
|
.driver = {
|
|
.name = "at_hdmac",
|
|
.pm = &at_dma_dev_pm_ops,
|
|
.of_match_table = of_match_ptr(atmel_dma_dt_ids),
|
|
},
|
|
};
|
|
|
|
static int __init at_dma_init(void)
|
|
{
|
|
return platform_driver_probe(&at_dma_driver, at_dma_probe);
|
|
}
|
|
subsys_initcall(at_dma_init);
|
|
|
|
static void __exit at_dma_exit(void)
|
|
{
|
|
platform_driver_unregister(&at_dma_driver);
|
|
}
|
|
module_exit(at_dma_exit);
|
|
|
|
MODULE_DESCRIPTION("Atmel AHB DMA Controller driver");
|
|
MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:at_hdmac");
|