mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 15:20:58 +07:00
60efff0c3d
GPHY revision G0 has its version rolled over to 0x10, introduce an explicit check for that revision and invoke the proper workaround function for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
474 lines
13 KiB
C
474 lines
13 KiB
C
/*
|
|
* Broadcom BCM7xxx internal transceivers support.
|
|
*
|
|
* Copyright (C) 2014, Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/brcmphy.h>
|
|
#include <linux/mdio.h>
|
|
|
|
/* Broadcom BCM7xxx internal PHY registers */
|
|
#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
|
|
|
|
/* 40nm only register definitions */
|
|
#define MII_BCM7XXX_100TX_AUX_CTL 0x10
|
|
#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
|
|
#define MII_BCM7XXX_100TX_DISC 0x14
|
|
#define MII_BCM7XXX_AUX_MODE 0x1d
|
|
#define MII_BCM7XX_64CLK_MDIO BIT(12)
|
|
#define MII_BCM7XXX_CORE_BASE1E 0x1e
|
|
#define MII_BCM7XXX_TEST 0x1f
|
|
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
|
|
|
|
/* 28nm only register definitions */
|
|
#define MISC_ADDR(base, channel) base, channel
|
|
|
|
#define DSP_TAP10 MISC_ADDR(0x0a, 0)
|
|
#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
|
|
#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
|
|
#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
|
|
|
|
#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
|
|
#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
|
|
#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
|
|
#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
|
|
#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
|
|
#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
|
|
#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
|
|
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
|
|
|
|
#define CORE_EXPB0 0xb0
|
|
|
|
static void phy_write_exp(struct phy_device *phydev,
|
|
u16 reg, u16 value)
|
|
{
|
|
phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
|
|
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
|
|
}
|
|
|
|
static void phy_write_misc(struct phy_device *phydev,
|
|
u16 reg, u16 chl, u16 value)
|
|
{
|
|
int tmp;
|
|
|
|
phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
|
|
|
|
tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
|
|
tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
|
|
phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
|
|
|
|
tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
|
|
phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
|
|
|
|
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
|
|
}
|
|
|
|
static void r_rc_cal_reset(struct phy_device *phydev)
|
|
{
|
|
/* Reset R_CAL/RC_CAL Engine */
|
|
phy_write_exp(phydev, 0x00b0, 0x0010);
|
|
|
|
/* Disable Reset R_AL/RC_CAL Engine */
|
|
phy_write_exp(phydev, 0x00b0, 0x0000);
|
|
}
|
|
|
|
static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
/* Increase VCO range to prevent unlocking problem of PLL at low
|
|
* temp
|
|
*/
|
|
phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
|
|
|
|
/* Change Ki to 011 */
|
|
phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
|
|
|
|
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
|
|
* to 111
|
|
*/
|
|
phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
|
|
|
|
/* Adjust bias current trim by -3 */
|
|
phy_write_misc(phydev, DSP_TAP10, 0x690b);
|
|
|
|
/* Switch to CORE_BASE1E */
|
|
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
|
|
|
|
r_rc_cal_reset(phydev);
|
|
|
|
/* write AFE_RXCONFIG_0 */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
|
|
|
|
/* write AFE_RXCONFIG_1 */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
|
|
|
|
/* write AFE_RX_LP_COUNTER */
|
|
phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
|
|
|
|
/* write AFE_HPF_TRIM_OTHERS */
|
|
phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
|
|
|
|
/* write AFTE_TX_CONFIG */
|
|
phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
/* AFE_RXCONFIG_0 */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
|
|
|
|
/* AFE_RXCONFIG_1 */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
|
|
|
|
/* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
|
|
|
|
/* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
|
|
phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
|
|
|
|
/* AFE_TX_CONFIG, set 1000BT Cfeed=110 for all ports */
|
|
phy_write_misc(phydev, AFE_TX_CONFIG, 0x0061);
|
|
|
|
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
|
|
phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
|
|
|
|
/* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
|
|
phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
|
|
|
|
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
|
|
* offset for HT=0 code
|
|
*/
|
|
phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
|
|
|
|
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
|
|
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
|
|
|
|
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
|
|
phy_write_misc(phydev, DSP_TAP10, 0x011b);
|
|
|
|
/* Reset R_CAL/RC_CAL engine */
|
|
r_rc_cal_reset(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
/* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
|
|
|
|
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
|
|
phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
|
|
|
|
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
|
|
* offset for HT=0 code
|
|
*/
|
|
phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
|
|
|
|
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
|
|
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
|
|
|
|
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
|
|
phy_write_misc(phydev, DSP_TAP10, 0x011b);
|
|
|
|
/* Reset R_CAL/RC_CAL engine */
|
|
r_rc_cal_reset(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_apd_enable(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
|
|
/* Enable powering down of the DLL during auto-power down */
|
|
val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
|
|
bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
|
|
|
|
/* Enable auto-power down */
|
|
val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
val |= BCM54XX_SHD_APD_EN;
|
|
return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
|
|
}
|
|
|
|
static int bcm7xxx_eee_enable(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
|
|
val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
|
|
MDIO_MMD_AN, phydev->addr);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
/* Enable general EEE feature at the PHY level */
|
|
val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
|
|
|
|
phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
|
|
MDIO_MMD_AN, phydev->addr, val);
|
|
|
|
/* Advertise supported modes */
|
|
val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
|
|
MDIO_MMD_AN, phydev->addr);
|
|
|
|
val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
|
|
phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
|
|
MDIO_MMD_AN, phydev->addr, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
|
|
{
|
|
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
|
|
u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
|
|
int ret = 0;
|
|
|
|
pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
|
|
dev_name(&phydev->dev), phydev->drv->name, rev, patch);
|
|
|
|
switch (rev) {
|
|
case 0xb0:
|
|
ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
|
|
break;
|
|
case 0xd0:
|
|
ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
|
|
break;
|
|
case 0xe0:
|
|
case 0xf0:
|
|
/* Rev G0 introduces a roll over */
|
|
case 0x10:
|
|
ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm7xxx_eee_enable(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return bcm7xxx_apd_enable(phydev);
|
|
}
|
|
|
|
static int bcm7xxx_28nm_resume(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Re-apply workarounds coming out suspend/resume */
|
|
ret = bcm7xxx_28nm_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 28nm Gigabit PHYs come out of reset without any half-duplex
|
|
* or "hub" compliant advertised mode, fix that. This does not
|
|
* cause any problems with the PHY library since genphy_config_aneg()
|
|
* gracefully handles auto-negotiated and forced modes.
|
|
*/
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int phy_set_clr_bits(struct phy_device *dev, int location,
|
|
int set_mask, int clr_mask)
|
|
{
|
|
int v, ret;
|
|
|
|
v = phy_read(dev, location);
|
|
if (v < 0)
|
|
return v;
|
|
|
|
v &= ~clr_mask;
|
|
v |= set_mask;
|
|
|
|
ret = phy_write(dev, location, v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return v;
|
|
}
|
|
|
|
static int bcm7xxx_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable 64 clock MDIO */
|
|
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
|
|
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
|
|
|
|
/* Workaround only required for 100Mbits/sec capable PHYs */
|
|
if (phydev->supported & PHY_GBIT_FEATURES)
|
|
return 0;
|
|
|
|
/* set shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
|
MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set iddq_clkbias */
|
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
|
|
udelay(10);
|
|
|
|
/* reset iddq_clkbias */
|
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
|
|
|
|
phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
|
|
|
|
/* reset shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Workaround for putting the PHY in IDDQ mode, required
|
|
* for all BCM7XXX 40nm and 65nm PHYs
|
|
*/
|
|
static int bcm7xxx_suspend(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
const struct bcm7xxx_regs {
|
|
int reg;
|
|
u16 value;
|
|
} bcm7xxx_suspend_cfg[] = {
|
|
{ MII_BCM7XXX_TEST, 0x008b },
|
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
|
|
{ MII_BCM7XXX_100TX_DISC, 0x7000 },
|
|
{ MII_BCM7XXX_TEST, 0x000f },
|
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
|
|
{ MII_BCM7XXX_TEST, 0x000b },
|
|
};
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
|
|
ret = phy_write(phydev,
|
|
bcm7xxx_suspend_cfg[i].reg,
|
|
bcm7xxx_suspend_cfg[i].value);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#define BCM7XXX_28NM_GPHY(_oui, _name) \
|
|
{ \
|
|
.phy_id = (_oui), \
|
|
.phy_id_mask = 0xfffffff0, \
|
|
.name = _name, \
|
|
.features = PHY_GBIT_FEATURES | \
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
|
|
.flags = PHY_IS_INTERNAL, \
|
|
.config_init = bcm7xxx_28nm_config_init, \
|
|
.config_aneg = genphy_config_aneg, \
|
|
.read_status = genphy_read_status, \
|
|
.resume = bcm7xxx_28nm_resume, \
|
|
.driver = { .owner = THIS_MODULE }, \
|
|
}
|
|
|
|
static struct phy_driver bcm7xxx_driver[] = {
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
|
|
{
|
|
.phy_id = PHY_ID_BCM7425,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom BCM7425",
|
|
.features = PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = 0,
|
|
.config_init = bcm7xxx_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = bcm7xxx_suspend,
|
|
.resume = bcm7xxx_config_init,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
.phy_id = PHY_ID_BCM7429,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom BCM7429",
|
|
.features = PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = bcm7xxx_suspend,
|
|
.resume = bcm7xxx_config_init,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
.phy_id = PHY_BCM_OUI_4,
|
|
.phy_id_mask = 0xffff0000,
|
|
.name = "Broadcom BCM7XXX 40nm",
|
|
.features = PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = bcm7xxx_suspend,
|
|
.resume = bcm7xxx_config_init,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
.phy_id = PHY_BCM_OUI_5,
|
|
.phy_id_mask = 0xffffff00,
|
|
.name = "Broadcom BCM7XXX 65nm",
|
|
.features = PHY_BASIC_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_dummy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = bcm7xxx_suspend,
|
|
.resume = bcm7xxx_config_init,
|
|
.driver = { .owner = THIS_MODULE },
|
|
} };
|
|
|
|
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
|
|
{ PHY_ID_BCM7250, 0xfffffff0, },
|
|
{ PHY_ID_BCM7364, 0xfffffff0, },
|
|
{ PHY_ID_BCM7366, 0xfffffff0, },
|
|
{ PHY_ID_BCM7425, 0xfffffff0, },
|
|
{ PHY_ID_BCM7429, 0xfffffff0, },
|
|
{ PHY_ID_BCM7439, 0xfffffff0, },
|
|
{ PHY_ID_BCM7445, 0xfffffff0, },
|
|
{ PHY_BCM_OUI_4, 0xffff0000 },
|
|
{ PHY_BCM_OUI_5, 0xffffff00 },
|
|
{ }
|
|
};
|
|
|
|
module_phy_driver(bcm7xxx_driver);
|
|
|
|
MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
|
|
|
|
MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Broadcom Corporation");
|