mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 09:48:07 +07:00
dacb12877d
USB4 spec specifies standard access to retimers (both on-board and cable) through USB4 port sideband access. This makes it possible to upgrade their firmware in the same way than we already do with the routers. This enumerates on-board retimers under each USB4 port when the link comes up and adds them to the bus under the router the retimer belongs to. Retimers are exposed in sysfs with name like <device>:<port>.<index> where device is the router the retimer belongs to, port is the USB4 port the retimer is connected to and index is the retimer index under that port (starting from 1). This applies to the upstream USB4 port as well so if there is on-board retimer between the port and the router it is also added accordingly. At this time we do not add cable retimers but there is no techincal restriction to do so in the future if needed. It is not clear whether it makes sense to upgrade their firmwares and at least Thunderbolt 3 cables it has not been done outside of lab environments. The sysfs interface is made to follow the router NVM upgrade to make it easy to extend the existing userspace (fwupd) to handle these as well. Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
486 lines
10 KiB
C
486 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Thunderbolt/USB4 retimer support.
|
|
*
|
|
* Copyright (C) 2020, Intel Corporation
|
|
* Authors: Kranthi Kuntala <kranthi.kuntala@intel.com>
|
|
* Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/sched/signal.h>
|
|
|
|
#include "sb_regs.h"
|
|
#include "tb.h"
|
|
|
|
#define TB_MAX_RETIMER_INDEX 6
|
|
|
|
static int tb_retimer_nvm_read(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
struct tb_nvm *nvm = priv;
|
|
struct tb_retimer *rt = tb_to_retimer(nvm->dev);
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(&rt->dev);
|
|
|
|
if (!mutex_trylock(&rt->tb->lock)) {
|
|
ret = restart_syscall();
|
|
goto out;
|
|
}
|
|
|
|
ret = usb4_port_retimer_nvm_read(rt->port, rt->index, offset, val, bytes);
|
|
mutex_unlock(&rt->tb->lock);
|
|
|
|
out:
|
|
pm_runtime_mark_last_busy(&rt->dev);
|
|
pm_runtime_put_autosuspend(&rt->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tb_retimer_nvm_write(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
struct tb_nvm *nvm = priv;
|
|
struct tb_retimer *rt = tb_to_retimer(nvm->dev);
|
|
int ret = 0;
|
|
|
|
if (!mutex_trylock(&rt->tb->lock))
|
|
return restart_syscall();
|
|
|
|
ret = tb_nvm_write_buf(nvm, offset, val, bytes);
|
|
mutex_unlock(&rt->tb->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tb_retimer_nvm_add(struct tb_retimer *rt)
|
|
{
|
|
struct tb_nvm *nvm;
|
|
u32 val, nvm_size;
|
|
int ret;
|
|
|
|
nvm = tb_nvm_alloc(&rt->dev);
|
|
if (IS_ERR(nvm))
|
|
return PTR_ERR(nvm);
|
|
|
|
ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_VERSION, &val,
|
|
sizeof(val));
|
|
if (ret)
|
|
goto err_nvm;
|
|
|
|
nvm->major = val >> 16;
|
|
nvm->minor = val >> 8;
|
|
|
|
ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_FLASH_SIZE,
|
|
&val, sizeof(val));
|
|
if (ret)
|
|
goto err_nvm;
|
|
|
|
nvm_size = (SZ_1M << (val & 7)) / 8;
|
|
nvm_size = (nvm_size - SZ_16K) / 2;
|
|
|
|
ret = tb_nvm_add_active(nvm, nvm_size, tb_retimer_nvm_read);
|
|
if (ret)
|
|
goto err_nvm;
|
|
|
|
ret = tb_nvm_add_non_active(nvm, NVM_MAX_SIZE, tb_retimer_nvm_write);
|
|
if (ret)
|
|
goto err_nvm;
|
|
|
|
rt->nvm = nvm;
|
|
return 0;
|
|
|
|
err_nvm:
|
|
tb_nvm_free(nvm);
|
|
return ret;
|
|
}
|
|
|
|
static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt)
|
|
{
|
|
unsigned int image_size, hdr_size;
|
|
const u8 *buf = rt->nvm->buf;
|
|
u16 ds_size, device;
|
|
|
|
image_size = rt->nvm->buf_data_size;
|
|
if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* FARB pointer must point inside the image and must at least
|
|
* contain parts of the digital section we will be reading here.
|
|
*/
|
|
hdr_size = (*(u32 *)buf) & 0xffffff;
|
|
if (hdr_size + NVM_DEVID + 2 >= image_size)
|
|
return -EINVAL;
|
|
|
|
/* Digital section start should be aligned to 4k page */
|
|
if (!IS_ALIGNED(hdr_size, SZ_4K))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Read digital section size and check that it also fits inside
|
|
* the image.
|
|
*/
|
|
ds_size = *(u16 *)(buf + hdr_size);
|
|
if (ds_size >= image_size)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Make sure the device ID in the image matches the retimer
|
|
* hardware.
|
|
*/
|
|
device = *(u16 *)(buf + hdr_size + NVM_DEVID);
|
|
if (device != rt->device)
|
|
return -EINVAL;
|
|
|
|
/* Skip headers in the image */
|
|
buf += hdr_size;
|
|
image_size -= hdr_size;
|
|
|
|
return usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf,
|
|
image_size);
|
|
}
|
|
|
|
static ssize_t device_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
|
|
return sprintf(buf, "%#x\n", rt->device);
|
|
}
|
|
static DEVICE_ATTR_RO(device);
|
|
|
|
static ssize_t nvm_authenticate_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
int ret;
|
|
|
|
if (!mutex_trylock(&rt->tb->lock))
|
|
return restart_syscall();
|
|
|
|
if (!rt->nvm)
|
|
ret = -EAGAIN;
|
|
else
|
|
ret = sprintf(buf, "%#x\n", rt->auth_status);
|
|
|
|
mutex_unlock(&rt->tb->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t nvm_authenticate_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
bool val;
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(&rt->dev);
|
|
|
|
if (!mutex_trylock(&rt->tb->lock)) {
|
|
ret = restart_syscall();
|
|
goto exit_rpm;
|
|
}
|
|
|
|
if (!rt->nvm) {
|
|
ret = -EAGAIN;
|
|
goto exit_unlock;
|
|
}
|
|
|
|
ret = kstrtobool(buf, &val);
|
|
if (ret)
|
|
goto exit_unlock;
|
|
|
|
/* Always clear status */
|
|
rt->auth_status = 0;
|
|
|
|
if (val) {
|
|
if (!rt->nvm->buf) {
|
|
ret = -EINVAL;
|
|
goto exit_unlock;
|
|
}
|
|
|
|
ret = tb_retimer_nvm_validate_and_write(rt);
|
|
if (ret)
|
|
goto exit_unlock;
|
|
|
|
ret = usb4_port_retimer_nvm_authenticate(rt->port, rt->index);
|
|
}
|
|
|
|
exit_unlock:
|
|
mutex_unlock(&rt->tb->lock);
|
|
exit_rpm:
|
|
pm_runtime_mark_last_busy(&rt->dev);
|
|
pm_runtime_put_autosuspend(&rt->dev);
|
|
|
|
if (ret)
|
|
return ret;
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_RW(nvm_authenticate);
|
|
|
|
static ssize_t nvm_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
int ret;
|
|
|
|
if (!mutex_trylock(&rt->tb->lock))
|
|
return restart_syscall();
|
|
|
|
if (!rt->nvm)
|
|
ret = -EAGAIN;
|
|
else
|
|
ret = sprintf(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor);
|
|
|
|
mutex_unlock(&rt->tb->lock);
|
|
return ret;
|
|
}
|
|
static DEVICE_ATTR_RO(nvm_version);
|
|
|
|
static ssize_t vendor_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
|
|
return sprintf(buf, "%#x\n", rt->vendor);
|
|
}
|
|
static DEVICE_ATTR_RO(vendor);
|
|
|
|
static struct attribute *retimer_attrs[] = {
|
|
&dev_attr_device.attr,
|
|
&dev_attr_nvm_authenticate.attr,
|
|
&dev_attr_nvm_version.attr,
|
|
&dev_attr_vendor.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group retimer_group = {
|
|
.attrs = retimer_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *retimer_groups[] = {
|
|
&retimer_group,
|
|
NULL
|
|
};
|
|
|
|
static void tb_retimer_release(struct device *dev)
|
|
{
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
|
|
kfree(rt);
|
|
}
|
|
|
|
struct device_type tb_retimer_type = {
|
|
.name = "thunderbolt_retimer",
|
|
.groups = retimer_groups,
|
|
.release = tb_retimer_release,
|
|
};
|
|
|
|
static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status)
|
|
{
|
|
struct tb_retimer *rt;
|
|
u32 vendor, device;
|
|
int ret;
|
|
|
|
if (!port->cap_usb4)
|
|
return -EINVAL;
|
|
|
|
ret = usb4_port_retimer_read(port, index, USB4_SB_VENDOR_ID, &vendor,
|
|
sizeof(vendor));
|
|
if (ret) {
|
|
if (ret != -ENODEV)
|
|
tb_port_warn(port, "failed read retimer VendorId: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = usb4_port_retimer_read(port, index, USB4_SB_PRODUCT_ID, &device,
|
|
sizeof(device));
|
|
if (ret) {
|
|
if (ret != -ENODEV)
|
|
tb_port_warn(port, "failed read retimer ProductId: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (vendor != PCI_VENDOR_ID_INTEL && vendor != 0x8087) {
|
|
tb_port_info(port, "retimer NVM format of vendor %#x is not supported\n",
|
|
vendor);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* Check that it supports NVM operations. If not then don't add
|
|
* the device at all.
|
|
*/
|
|
ret = usb4_port_retimer_nvm_sector_size(port, index);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rt = kzalloc(sizeof(*rt), GFP_KERNEL);
|
|
if (!rt)
|
|
return -ENOMEM;
|
|
|
|
rt->index = index;
|
|
rt->vendor = vendor;
|
|
rt->device = device;
|
|
rt->auth_status = auth_status;
|
|
rt->port = port;
|
|
rt->tb = port->sw->tb;
|
|
|
|
rt->dev.parent = &port->sw->dev;
|
|
rt->dev.bus = &tb_bus_type;
|
|
rt->dev.type = &tb_retimer_type;
|
|
dev_set_name(&rt->dev, "%s:%u.%u", dev_name(&port->sw->dev),
|
|
port->port, index);
|
|
|
|
ret = device_register(&rt->dev);
|
|
if (ret) {
|
|
dev_err(&rt->dev, "failed to register retimer: %d\n", ret);
|
|
put_device(&rt->dev);
|
|
return ret;
|
|
}
|
|
|
|
ret = tb_retimer_nvm_add(rt);
|
|
if (ret) {
|
|
dev_err(&rt->dev, "failed to add NVM devices: %d\n", ret);
|
|
device_del(&rt->dev);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&rt->dev, "new retimer found, vendor=%#x device=%#x\n",
|
|
rt->vendor, rt->device);
|
|
|
|
pm_runtime_no_callbacks(&rt->dev);
|
|
pm_runtime_set_active(&rt->dev);
|
|
pm_runtime_enable(&rt->dev);
|
|
pm_runtime_set_autosuspend_delay(&rt->dev, TB_AUTOSUSPEND_DELAY);
|
|
pm_runtime_mark_last_busy(&rt->dev);
|
|
pm_runtime_use_autosuspend(&rt->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tb_retimer_remove(struct tb_retimer *rt)
|
|
{
|
|
dev_info(&rt->dev, "retimer disconnected\n");
|
|
tb_nvm_free(rt->nvm);
|
|
device_unregister(&rt->dev);
|
|
}
|
|
|
|
struct tb_retimer_lookup {
|
|
const struct tb_port *port;
|
|
u8 index;
|
|
};
|
|
|
|
static int retimer_match(struct device *dev, void *data)
|
|
{
|
|
const struct tb_retimer_lookup *lookup = data;
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
|
|
return rt && rt->port == lookup->port && rt->index == lookup->index;
|
|
}
|
|
|
|
static struct tb_retimer *tb_port_find_retimer(struct tb_port *port, u8 index)
|
|
{
|
|
struct tb_retimer_lookup lookup = { .port = port, .index = index };
|
|
struct device *dev;
|
|
|
|
dev = device_find_child(&port->sw->dev, &lookup, retimer_match);
|
|
if (dev)
|
|
return tb_to_retimer(dev);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* tb_retimer_scan() - Scan for on-board retimers under port
|
|
* @port: USB4 port to scan
|
|
*
|
|
* Tries to enumerate on-board retimers connected to @port. Found
|
|
* retimers are registered as children of @port. Does not scan for cable
|
|
* retimers for now.
|
|
*/
|
|
int tb_retimer_scan(struct tb_port *port)
|
|
{
|
|
u32 status[TB_MAX_RETIMER_INDEX] = {};
|
|
int ret, i, last_idx = 0;
|
|
|
|
if (!port->cap_usb4)
|
|
return 0;
|
|
|
|
/*
|
|
* Send broadcast RT to make sure retimer indices facing this
|
|
* port are set.
|
|
*/
|
|
ret = usb4_port_enumerate_retimers(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Before doing anything else, read the authentication status.
|
|
* If the retimer has it set, store it for the new retimer
|
|
* device instance.
|
|
*/
|
|
for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
|
|
usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]);
|
|
|
|
for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) {
|
|
/*
|
|
* Last retimer is true only for the last on-board
|
|
* retimer (the one connected directly to the Type-C
|
|
* port).
|
|
*/
|
|
ret = usb4_port_retimer_is_last(port, i);
|
|
if (ret > 0)
|
|
last_idx = i;
|
|
else if (ret < 0)
|
|
break;
|
|
}
|
|
|
|
if (!last_idx)
|
|
return 0;
|
|
|
|
/* Add on-board retimers if they do not exist already */
|
|
for (i = 1; i <= last_idx; i++) {
|
|
struct tb_retimer *rt;
|
|
|
|
rt = tb_port_find_retimer(port, i);
|
|
if (rt) {
|
|
put_device(&rt->dev);
|
|
} else {
|
|
ret = tb_retimer_add(port, i, status[i]);
|
|
if (ret && ret != -EOPNOTSUPP)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int remove_retimer(struct device *dev, void *data)
|
|
{
|
|
struct tb_retimer *rt = tb_to_retimer(dev);
|
|
struct tb_port *port = data;
|
|
|
|
if (rt && rt->port == port)
|
|
tb_retimer_remove(rt);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tb_retimer_remove_all() - Remove all retimers under port
|
|
* @port: USB4 port whose retimers to remove
|
|
*
|
|
* This removes all previously added retimers under @port.
|
|
*/
|
|
void tb_retimer_remove_all(struct tb_port *port)
|
|
{
|
|
if (port->cap_usb4)
|
|
device_for_each_child_reverse(&port->sw->dev, port,
|
|
remove_retimer);
|
|
}
|