linux_dsm_epyc7002/drivers/gpu/drm/vc4/vc4_kms.c
Maarten Lankhorst d68bc0e75a drm/vc4: Handle drm_atomic_helper_swap_state failure
drm_atomic_helper_swap_state() will be changed to interruptible waiting
in the next few commits, so all drivers have to be changed to handling
failure.

VC4 has its own nonblocking modeset tracking through the vc4->async_modeset
semaphore, so it doesn't need to stall in swap_state. Pass stall = false
and BUG_ON when it returns an error. This should never happen for !stall.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-11-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-26 13:22:43 +02:00

237 lines
6.2 KiB
C

/*
* Copyright (C) 2015 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/**
* DOC: VC4 KMS
*
* This is the general code for implementing KMS mode setting that
* doesn't clearly associate with any of the other objects (plane,
* crtc, HDMI encoder).
*/
#include <drm/drm_crtc.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include "vc4_drv.h"
static void vc4_output_poll_changed(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
drm_fbdev_cma_hotplug_event(vc4->fbdev);
}
static void
vc4_atomic_complete_commit(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
drm_atomic_helper_wait_for_fences(dev, state, false);
drm_atomic_helper_wait_for_dependencies(state);
drm_atomic_helper_commit_modeset_disables(dev, state);
drm_atomic_helper_commit_planes(dev, state, 0);
drm_atomic_helper_commit_modeset_enables(dev, state);
/* Make sure that drm_atomic_helper_wait_for_vblanks()
* actually waits for vblank. If we're doing a full atomic
* modeset (as opposed to a vc4_update_plane() short circuit),
* then we need to wait for scanout to be done with our
* display lists before we free it and potentially reallocate
* and overwrite the dlist memory with a new modeset.
*/
state->legacy_cursor_update = false;
drm_atomic_helper_commit_hw_done(state);
drm_atomic_helper_wait_for_vblanks(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
drm_atomic_helper_commit_cleanup_done(state);
drm_atomic_state_put(state);
up(&vc4->async_modeset);
}
static void commit_work(struct work_struct *work)
{
struct drm_atomic_state *state = container_of(work,
struct drm_atomic_state,
commit_work);
vc4_atomic_complete_commit(state);
}
/**
* vc4_atomic_commit - commit validated state object
* @dev: DRM device
* @state: the driver state object
* @nonblock: nonblocking commit
*
* This function commits a with drm_atomic_helper_check() pre-validated state
* object. This can still fail when e.g. the framebuffer reservation fails. For
* now this doesn't implement asynchronous commits.
*
* RETURNS
* Zero for success or -errno.
*/
static int vc4_atomic_commit(struct drm_device *dev,
struct drm_atomic_state *state,
bool nonblock)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
int ret;
ret = drm_atomic_helper_setup_commit(state, nonblock);
if (ret)
return ret;
INIT_WORK(&state->commit_work, commit_work);
ret = down_interruptible(&vc4->async_modeset);
if (ret)
return ret;
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret) {
up(&vc4->async_modeset);
return ret;
}
if (!nonblock) {
ret = drm_atomic_helper_wait_for_fences(dev, state, true);
if (ret) {
drm_atomic_helper_cleanup_planes(dev, state);
up(&vc4->async_modeset);
return ret;
}
}
/*
* This is the point of no return - everything below never fails except
* when the hw goes bonghits. Which means we can commit the new state on
* the software side now.
*/
BUG_ON(drm_atomic_helper_swap_state(state, false) < 0);
/*
* Everything below can be run asynchronously without the need to grab
* any modeset locks at all under one condition: It must be guaranteed
* that the asynchronous work has either been cancelled (if the driver
* supports it, which at least requires that the framebuffers get
* cleaned up with drm_atomic_helper_cleanup_planes()) or completed
* before the new state gets committed on the software side with
* drm_atomic_helper_swap_state().
*
* This scheme allows new atomic state updates to be prepared and
* checked in parallel to the asynchronous completion of the previous
* update. Which is important since compositors need to figure out the
* composition of the next frame right after having submitted the
* current layout.
*/
drm_atomic_state_get(state);
if (nonblock)
queue_work(system_unbound_wq, &state->commit_work);
else
vc4_atomic_complete_commit(state);
return 0;
}
static struct drm_framebuffer *vc4_fb_create(struct drm_device *dev,
struct drm_file *file_priv,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
struct drm_mode_fb_cmd2 mode_cmd_local;
/* If the user didn't specify a modifier, use the
* vc4_set_tiling_ioctl() state for the BO.
*/
if (!(mode_cmd->flags & DRM_MODE_FB_MODIFIERS)) {
struct drm_gem_object *gem_obj;
struct vc4_bo *bo;
gem_obj = drm_gem_object_lookup(file_priv,
mode_cmd->handles[0]);
if (!gem_obj) {
DRM_ERROR("Failed to look up GEM BO %d\n",
mode_cmd->handles[0]);
return ERR_PTR(-ENOENT);
}
bo = to_vc4_bo(gem_obj);
mode_cmd_local = *mode_cmd;
if (bo->t_format) {
mode_cmd_local.modifier[0] =
DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED;
} else {
mode_cmd_local.modifier[0] = DRM_FORMAT_MOD_NONE;
}
drm_gem_object_unreference_unlocked(gem_obj);
mode_cmd = &mode_cmd_local;
}
return drm_fb_cma_create(dev, file_priv, mode_cmd);
}
static const struct drm_mode_config_funcs vc4_mode_funcs = {
.output_poll_changed = vc4_output_poll_changed,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = vc4_atomic_commit,
.fb_create = vc4_fb_create,
};
int vc4_kms_load(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
int ret;
sema_init(&vc4->async_modeset, 1);
/* Set support for vblank irq fast disable, before drm_vblank_init() */
dev->vblank_disable_immediate = true;
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret < 0) {
dev_err(dev->dev, "failed to initialize vblank\n");
return ret;
}
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
dev->mode_config.funcs = &vc4_mode_funcs;
dev->mode_config.preferred_depth = 24;
dev->mode_config.async_page_flip = true;
drm_mode_config_reset(dev);
if (dev->mode_config.num_connector) {
vc4->fbdev = drm_fbdev_cma_init(dev, 32,
dev->mode_config.num_connector);
if (IS_ERR(vc4->fbdev))
vc4->fbdev = NULL;
}
drm_kms_helper_poll_init(dev);
return 0;
}