mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 14:43:46 +07:00
97d642e230
This driver handles two different Sharp sensors that have been proposed for merging to the mainline kernel over the years, and already has a limited proximity-only driver in the input subsystem. These components are completely different from the confusingly similarly named Sharp GP2AP020A00F, for which we have a driver in drivers/iio/light/gp2ap020a00f.c The two components GP2AP002A00F and GP2AP002S00F are distinctively different but similar: they share the same set of registers but differ slightly in the I2C protocol. Instead of the approach by the previous input driver, we create a combined IIO proximity and light sensor driver. The plan is to merge this driver and delete the input driver. The pieces for the driver are picked all over the place after researching and grepping through a few different vendor trees and driver submissions. We merge it under the light sensors because: - It has similarities with the Capella CM3605 light sensor and proximity driver which is there. - It is related to the GP2AP020A00F driver which is also there. This driver was tested with the Samsung GT-S7710 mobile phone which has the GP2AP002S00F proximity sensor mounted. The suspend/resume cycle will disable the interrupt from the sensor. If someone would desire to use this interrupt for wakeup, the driver will need modifications. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Jonathan Bakker <xc-racer2@live.ca> Cc: Oskar Andero <oskar.andero@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
---|---|---|
.. | ||
accel | ||
adc | ||
afe | ||
amplifiers | ||
buffer | ||
chemical | ||
common | ||
dac | ||
dummy | ||
frequency | ||
gyro | ||
health | ||
humidity | ||
imu | ||
light | ||
magnetometer | ||
multiplexer | ||
orientation | ||
potentiometer | ||
potentiostat | ||
pressure | ||
proximity | ||
resolver | ||
temperature | ||
trigger | ||
iio_core_trigger.h | ||
iio_core.h | ||
industrialio-buffer.c | ||
industrialio-configfs.c | ||
industrialio-core.c | ||
industrialio-event.c | ||
industrialio-sw-device.c | ||
industrialio-sw-trigger.c | ||
industrialio-trigger.c | ||
industrialio-triggered-event.c | ||
inkern.c | ||
Kconfig | ||
Makefile |