mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 18:30:54 +07:00
b6f0f6c40b
The schematic expects VAUX1 to be 3.0V attached to the debug port. The schematic expects VAUX4 to be 1.8V. VAUX4 powers VDDS_CSI2 on processor. Signed-off-by: Adam Ford <adam.ford@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
188 lines
4.3 KiB
Plaintext
188 lines
4.3 KiB
Plaintext
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "omap36xx.dtsi"
|
|
#include "logicpd-torpedo-som.dtsi"
|
|
#include "omap-gpmc-smsc9221.dtsi"
|
|
|
|
/ {
|
|
model = "LogicPD Zoom DM3730 Torpedo Development Kit";
|
|
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
|
|
|
|
sysboot2 {
|
|
label = "sysboot2";
|
|
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
|
|
linux,code = <BTN_0>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
sysboot5 {
|
|
label = "sysboot5";
|
|
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
|
|
linux,code = <BTN_1>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
gpio1 {
|
|
label = "gpio1";
|
|
gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
|
|
linux,code = <BTN_2>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
gpio2 {
|
|
label = "gpio2";
|
|
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
|
|
linux,code = <BTN_3>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "ti,omap-twl4030";
|
|
ti,model = "omap3logic";
|
|
ti,mcbsp = <&mcbsp2>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pins>;
|
|
|
|
led1 {
|
|
label = "led1";
|
|
gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
|
|
linux,default-trigger = "cpu0";
|
|
};
|
|
|
|
led2 {
|
|
label = "led2";
|
|
gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
|
|
linux,default-trigger = "none";
|
|
};
|
|
};
|
|
};
|
|
|
|
&vaux1 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
&vaux4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&vaux1 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
&vaux4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&mcbsp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&charger {
|
|
ti,bb-uvolt = <3200000>;
|
|
ti,bb-uamp = <150>;
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */
|
|
|
|
ethernet@gpmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lan9221_pins>;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
|
|
reg = <1 0 0xff>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins &mmc1_cd>;
|
|
cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */
|
|
vmmc-supply = <&vmmc1>;
|
|
bus-width = <4>;
|
|
cap-power-off-card;
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
gpio_key_pins: pinmux_gpio_key_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
|
|
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
|
|
>;
|
|
};
|
|
|
|
led_pins: pinmux_led_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
|
|
OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
|
|
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
|
|
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_wkup {
|
|
gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
|
|
pinctrl-single,pins = <
|
|
OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
|
|
OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
|
|
>;
|
|
};
|
|
|
|
lan9221_pins: pinmux_lan9221_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
|
|
>;
|
|
};
|
|
|
|
mmc1_cd: pinmux_mmc1_cd {
|
|
pinctrl-single,pins = <
|
|
OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
|
|
};
|
|
|
|
/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
|
|
&usb_otg_hs {
|
|
interface-type = <0>;
|
|
usb-phy = <&usb2_phy>;
|
|
phys = <&usb2_phy>;
|
|
phy-names = "usb2-phy";
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|