linux_dsm_epyc7002/include/linux/signal.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

436 lines
12 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_SIGNAL_H
#define _LINUX_SIGNAL_H
#include <linux/bug.h>
#include <linux/signal_types.h>
#include <linux/string.h>
struct task_struct;
/* for sysctl */
extern int print_fatal_signals;
static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(*to));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
}
int copy_siginfo_to_user(struct siginfo __user *to, const struct siginfo *from);
enum siginfo_layout {
SIL_KILL,
SIL_TIMER,
SIL_POLL,
SIL_FAULT,
SIL_CHLD,
SIL_RT,
#ifdef __ARCH_SIGSYS
SIL_SYS,
#endif
};
enum siginfo_layout siginfo_layout(int sig, int si_code);
/*
* Define some primitives to manipulate sigset_t.
*/
#ifndef __HAVE_ARCH_SIG_BITOPS
#include <linux/bitops.h>
/* We don't use <linux/bitops.h> for these because there is no need to
be atomic. */
static inline void sigaddset(sigset_t *set, int _sig)
{
unsigned long sig = _sig - 1;
if (_NSIG_WORDS == 1)
set->sig[0] |= 1UL << sig;
else
set->sig[sig / _NSIG_BPW] |= 1UL << (sig % _NSIG_BPW);
}
static inline void sigdelset(sigset_t *set, int _sig)
{
unsigned long sig = _sig - 1;
if (_NSIG_WORDS == 1)
set->sig[0] &= ~(1UL << sig);
else
set->sig[sig / _NSIG_BPW] &= ~(1UL << (sig % _NSIG_BPW));
}
static inline int sigismember(sigset_t *set, int _sig)
{
unsigned long sig = _sig - 1;
if (_NSIG_WORDS == 1)
return 1 & (set->sig[0] >> sig);
else
return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
}
#endif /* __HAVE_ARCH_SIG_BITOPS */
static inline int sigisemptyset(sigset_t *set)
{
switch (_NSIG_WORDS) {
case 4:
return (set->sig[3] | set->sig[2] |
set->sig[1] | set->sig[0]) == 0;
case 2:
return (set->sig[1] | set->sig[0]) == 0;
case 1:
return set->sig[0] == 0;
default:
BUILD_BUG();
return 0;
}
}
static inline int sigequalsets(const sigset_t *set1, const sigset_t *set2)
{
switch (_NSIG_WORDS) {
case 4:
return (set1->sig[3] == set2->sig[3]) &&
(set1->sig[2] == set2->sig[2]) &&
(set1->sig[1] == set2->sig[1]) &&
(set1->sig[0] == set2->sig[0]);
case 2:
return (set1->sig[1] == set2->sig[1]) &&
(set1->sig[0] == set2->sig[0]);
case 1:
return set1->sig[0] == set2->sig[0];
}
return 0;
}
#define sigmask(sig) (1UL << ((sig) - 1))
#ifndef __HAVE_ARCH_SIG_SETOPS
#include <linux/string.h>
#define _SIG_SET_BINOP(name, op) \
static inline void name(sigset_t *r, const sigset_t *a, const sigset_t *b) \
{ \
unsigned long a0, a1, a2, a3, b0, b1, b2, b3; \
\
switch (_NSIG_WORDS) { \
case 4: \
a3 = a->sig[3]; a2 = a->sig[2]; \
b3 = b->sig[3]; b2 = b->sig[2]; \
r->sig[3] = op(a3, b3); \
r->sig[2] = op(a2, b2); \
case 2: \
a1 = a->sig[1]; b1 = b->sig[1]; \
r->sig[1] = op(a1, b1); \
case 1: \
a0 = a->sig[0]; b0 = b->sig[0]; \
r->sig[0] = op(a0, b0); \
break; \
default: \
BUILD_BUG(); \
} \
}
#define _sig_or(x,y) ((x) | (y))
_SIG_SET_BINOP(sigorsets, _sig_or)
#define _sig_and(x,y) ((x) & (y))
_SIG_SET_BINOP(sigandsets, _sig_and)
#define _sig_andn(x,y) ((x) & ~(y))
_SIG_SET_BINOP(sigandnsets, _sig_andn)
#undef _SIG_SET_BINOP
#undef _sig_or
#undef _sig_and
#undef _sig_andn
#define _SIG_SET_OP(name, op) \
static inline void name(sigset_t *set) \
{ \
switch (_NSIG_WORDS) { \
case 4: set->sig[3] = op(set->sig[3]); \
set->sig[2] = op(set->sig[2]); \
case 2: set->sig[1] = op(set->sig[1]); \
case 1: set->sig[0] = op(set->sig[0]); \
break; \
default: \
BUILD_BUG(); \
} \
}
#define _sig_not(x) (~(x))
_SIG_SET_OP(signotset, _sig_not)
#undef _SIG_SET_OP
#undef _sig_not
static inline void sigemptyset(sigset_t *set)
{
switch (_NSIG_WORDS) {
default:
memset(set, 0, sizeof(sigset_t));
break;
case 2: set->sig[1] = 0;
case 1: set->sig[0] = 0;
break;
}
}
static inline void sigfillset(sigset_t *set)
{
switch (_NSIG_WORDS) {
default:
memset(set, -1, sizeof(sigset_t));
break;
case 2: set->sig[1] = -1;
case 1: set->sig[0] = -1;
break;
}
}
/* Some extensions for manipulating the low 32 signals in particular. */
static inline void sigaddsetmask(sigset_t *set, unsigned long mask)
{
set->sig[0] |= mask;
}
static inline void sigdelsetmask(sigset_t *set, unsigned long mask)
{
set->sig[0] &= ~mask;
}
static inline int sigtestsetmask(sigset_t *set, unsigned long mask)
{
return (set->sig[0] & mask) != 0;
}
static inline void siginitset(sigset_t *set, unsigned long mask)
{
set->sig[0] = mask;
switch (_NSIG_WORDS) {
default:
memset(&set->sig[1], 0, sizeof(long)*(_NSIG_WORDS-1));
break;
case 2: set->sig[1] = 0;
case 1: ;
}
}
static inline void siginitsetinv(sigset_t *set, unsigned long mask)
{
set->sig[0] = ~mask;
switch (_NSIG_WORDS) {
default:
memset(&set->sig[1], -1, sizeof(long)*(_NSIG_WORDS-1));
break;
case 2: set->sig[1] = -1;
case 1: ;
}
}
#endif /* __HAVE_ARCH_SIG_SETOPS */
static inline void init_sigpending(struct sigpending *sig)
{
sigemptyset(&sig->signal);
INIT_LIST_HEAD(&sig->list);
}
extern void flush_sigqueue(struct sigpending *queue);
/* Test if 'sig' is valid signal. Use this instead of testing _NSIG directly */
static inline int valid_signal(unsigned long sig)
{
return sig <= _NSIG ? 1 : 0;
}
struct timespec;
struct pt_regs;
extern int next_signal(struct sigpending *pending, sigset_t *mask);
extern int do_send_sig_info(int sig, struct siginfo *info,
struct task_struct *p, bool group);
extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
extern int sigprocmask(int, sigset_t *, sigset_t *);
extern void set_current_blocked(sigset_t *);
extern void __set_current_blocked(const sigset_t *);
extern int show_unhandled_signals;
extern int get_signal(struct ksignal *ksig);
extern void signal_setup_done(int failed, struct ksignal *ksig, int stepping);
extern void exit_signals(struct task_struct *tsk);
extern void kernel_sigaction(int, __sighandler_t);
static inline void allow_signal(int sig)
{
/*
* Kernel threads handle their own signals. Let the signal code
* know it'll be handled, so that they don't get converted to
* SIGKILL or just silently dropped.
*/
kernel_sigaction(sig, (__force __sighandler_t)2);
}
static inline void disallow_signal(int sig)
{
kernel_sigaction(sig, SIG_IGN);
}
extern struct kmem_cache *sighand_cachep;
int unhandled_signal(struct task_struct *tsk, int sig);
/*
* In POSIX a signal is sent either to a specific thread (Linux task)
* or to the process as a whole (Linux thread group). How the signal
* is sent determines whether it's to one thread or the whole group,
* which determines which signal mask(s) are involved in blocking it
* from being delivered until later. When the signal is delivered,
* either it's caught or ignored by a user handler or it has a default
* effect that applies to the whole thread group (POSIX process).
*
* The possible effects an unblocked signal set to SIG_DFL can have are:
* ignore - Nothing Happens
* terminate - kill the process, i.e. all threads in the group,
* similar to exit_group. The group leader (only) reports
* WIFSIGNALED status to its parent.
* coredump - write a core dump file describing all threads using
* the same mm and then kill all those threads
* stop - stop all the threads in the group, i.e. TASK_STOPPED state
*
* SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
* Other signals when not blocked and set to SIG_DFL behaves as follows.
* The job control signals also have other special effects.
*
* +--------------------+------------------+
* | POSIX signal | default action |
* +--------------------+------------------+
* | SIGHUP | terminate |
* | SIGINT | terminate |
* | SIGQUIT | coredump |
* | SIGILL | coredump |
* | SIGTRAP | coredump |
* | SIGABRT/SIGIOT | coredump |
* | SIGBUS | coredump |
* | SIGFPE | coredump |
* | SIGKILL | terminate(+) |
* | SIGUSR1 | terminate |
* | SIGSEGV | coredump |
* | SIGUSR2 | terminate |
* | SIGPIPE | terminate |
* | SIGALRM | terminate |
* | SIGTERM | terminate |
* | SIGCHLD | ignore |
* | SIGCONT | ignore(*) |
* | SIGSTOP | stop(*)(+) |
* | SIGTSTP | stop(*) |
* | SIGTTIN | stop(*) |
* | SIGTTOU | stop(*) |
* | SIGURG | ignore |
* | SIGXCPU | coredump |
* | SIGXFSZ | coredump |
* | SIGVTALRM | terminate |
* | SIGPROF | terminate |
* | SIGPOLL/SIGIO | terminate |
* | SIGSYS/SIGUNUSED | coredump |
* | SIGSTKFLT | terminate |
* | SIGWINCH | ignore |
* | SIGPWR | terminate |
* | SIGRTMIN-SIGRTMAX | terminate |
* +--------------------+------------------+
* | non-POSIX signal | default action |
* +--------------------+------------------+
* | SIGEMT | coredump |
* +--------------------+------------------+
*
* (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
* (*) Special job control effects:
* When SIGCONT is sent, it resumes the process (all threads in the group)
* from TASK_STOPPED state and also clears any pending/queued stop signals
* (any of those marked with "stop(*)"). This happens regardless of blocking,
* catching, or ignoring SIGCONT. When any stop signal is sent, it clears
* any pending/queued SIGCONT signals; this happens regardless of blocking,
* catching, or ignored the stop signal, though (except for SIGSTOP) the
* default action of stopping the process may happen later or never.
*/
#ifdef SIGEMT
#define SIGEMT_MASK rt_sigmask(SIGEMT)
#else
#define SIGEMT_MASK 0
#endif
#if SIGRTMIN > BITS_PER_LONG
#define rt_sigmask(sig) (1ULL << ((sig)-1))
#else
#define rt_sigmask(sig) sigmask(sig)
#endif
#define siginmask(sig, mask) \
((sig) < SIGRTMIN && (rt_sigmask(sig) & (mask)))
#define SIG_KERNEL_ONLY_MASK (\
rt_sigmask(SIGKILL) | rt_sigmask(SIGSTOP))
#define SIG_KERNEL_STOP_MASK (\
rt_sigmask(SIGSTOP) | rt_sigmask(SIGTSTP) | \
rt_sigmask(SIGTTIN) | rt_sigmask(SIGTTOU) )
#define SIG_KERNEL_COREDUMP_MASK (\
rt_sigmask(SIGQUIT) | rt_sigmask(SIGILL) | \
rt_sigmask(SIGTRAP) | rt_sigmask(SIGABRT) | \
rt_sigmask(SIGFPE) | rt_sigmask(SIGSEGV) | \
rt_sigmask(SIGBUS) | rt_sigmask(SIGSYS) | \
rt_sigmask(SIGXCPU) | rt_sigmask(SIGXFSZ) | \
SIGEMT_MASK )
#define SIG_KERNEL_IGNORE_MASK (\
rt_sigmask(SIGCONT) | rt_sigmask(SIGCHLD) | \
rt_sigmask(SIGWINCH) | rt_sigmask(SIGURG) )
#define SIG_SPECIFIC_SICODES_MASK (\
rt_sigmask(SIGILL) | rt_sigmask(SIGFPE) | \
rt_sigmask(SIGSEGV) | rt_sigmask(SIGBUS) | \
rt_sigmask(SIGTRAP) | rt_sigmask(SIGCHLD) | \
rt_sigmask(SIGPOLL) | rt_sigmask(SIGSYS) | \
SIGEMT_MASK )
#define sig_kernel_only(sig) siginmask(sig, SIG_KERNEL_ONLY_MASK)
#define sig_kernel_coredump(sig) siginmask(sig, SIG_KERNEL_COREDUMP_MASK)
#define sig_kernel_ignore(sig) siginmask(sig, SIG_KERNEL_IGNORE_MASK)
#define sig_kernel_stop(sig) siginmask(sig, SIG_KERNEL_STOP_MASK)
#define sig_specific_sicodes(sig) siginmask(sig, SIG_SPECIFIC_SICODES_MASK)
#define sig_fatal(t, signr) \
(!siginmask(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
(t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
void signals_init(void);
int restore_altstack(const stack_t __user *);
int __save_altstack(stack_t __user *, unsigned long);
#define save_altstack_ex(uss, sp) do { \
stack_t __user *__uss = uss; \
struct task_struct *t = current; \
put_user_ex((void __user *)t->sas_ss_sp, &__uss->ss_sp); \
put_user_ex(t->sas_ss_flags, &__uss->ss_flags); \
put_user_ex(t->sas_ss_size, &__uss->ss_size); \
if (t->sas_ss_flags & SS_AUTODISARM) \
sas_ss_reset(t); \
} while (0);
#ifdef CONFIG_PROC_FS
struct seq_file;
extern void render_sigset_t(struct seq_file *, const char *, sigset_t *);
#endif
#endif /* _LINUX_SIGNAL_H */