mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 05:45:09 +07:00
79bb646001
Add a GPIO driver for the low-power Powerdown Controller GPIOs in the TZ1090 SoC. The driver is instantiated by device tree and supports interrupts for the SysWake GPIOs only. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - gpio-tz1090*: refer to <dt-bindings/gpio/gpio.h> and <dt-bindings/interrupt-controller/irq.h> flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. Changes in v2: - gpio-tz1090-pdc: remove references to Linux flags in dt bindings - gpio-tz1090-pdc: make use of BIT() from linux/bitops.h - gpio-tz1090-pdc: make register accessors inline to match pinctrl - gpio-tz1090-pdc: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
244 lines
6.1 KiB
C
244 lines
6.1 KiB
C
/*
|
|
* Toumaz Xenif TZ1090 PDC GPIO handling.
|
|
*
|
|
* Copyright (C) 2012-2013 Imagination Technologies Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <asm/global_lock.h>
|
|
|
|
/* Register offsets from SOC_GPIO_CONTROL0 */
|
|
#define REG_SOC_GPIO_CONTROL0 0x00
|
|
#define REG_SOC_GPIO_CONTROL1 0x04
|
|
#define REG_SOC_GPIO_CONTROL2 0x08
|
|
#define REG_SOC_GPIO_CONTROL3 0x0c
|
|
#define REG_SOC_GPIO_STATUS 0x80
|
|
|
|
/* PDC GPIOs go after normal GPIOs */
|
|
#define GPIO_PDC_BASE 90
|
|
#define GPIO_PDC_NGPIO 7
|
|
|
|
/* Out of PDC gpios, only syswakes have irqs */
|
|
#define GPIO_PDC_IRQ_FIRST 2
|
|
#define GPIO_PDC_NIRQ 3
|
|
|
|
/**
|
|
* struct tz1090_pdc_gpio - GPIO bank private data
|
|
* @chip: Generic GPIO chip for GPIO bank
|
|
* @reg: Base of registers, offset for this GPIO bank
|
|
* @irq: IRQ numbers for Syswake GPIOs
|
|
*
|
|
* This is the main private data for the PDC GPIO driver. It encapsulates a
|
|
* gpio_chip, and the callbacks for the gpio_chip can access the private data
|
|
* with the to_pdc() macro below.
|
|
*/
|
|
struct tz1090_pdc_gpio {
|
|
struct gpio_chip chip;
|
|
void __iomem *reg;
|
|
int irq[GPIO_PDC_NIRQ];
|
|
};
|
|
#define to_pdc(c) container_of(c, struct tz1090_pdc_gpio, chip)
|
|
|
|
/* Register accesses into the PDC MMIO area */
|
|
|
|
static inline void pdc_write(struct tz1090_pdc_gpio *priv, unsigned int reg_offs,
|
|
unsigned int data)
|
|
{
|
|
writel(data, priv->reg + reg_offs);
|
|
}
|
|
|
|
static inline unsigned int pdc_read(struct tz1090_pdc_gpio *priv,
|
|
unsigned int reg_offs)
|
|
{
|
|
return readl(priv->reg + reg_offs);
|
|
}
|
|
|
|
/* Generic GPIO interface */
|
|
|
|
static int tz1090_pdc_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct tz1090_pdc_gpio *priv = to_pdc(chip);
|
|
u32 value;
|
|
int lstat;
|
|
|
|
__global_lock2(lstat);
|
|
value = pdc_read(priv, REG_SOC_GPIO_CONTROL1);
|
|
value |= BIT(offset);
|
|
pdc_write(priv, REG_SOC_GPIO_CONTROL1, value);
|
|
__global_unlock2(lstat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tz1090_pdc_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset,
|
|
int output_value)
|
|
{
|
|
struct tz1090_pdc_gpio *priv = to_pdc(chip);
|
|
u32 value;
|
|
int lstat;
|
|
|
|
__global_lock2(lstat);
|
|
/* EXT_POWER doesn't seem to have an output value bit */
|
|
if (offset < 6) {
|
|
value = pdc_read(priv, REG_SOC_GPIO_CONTROL0);
|
|
if (output_value)
|
|
value |= BIT(offset);
|
|
else
|
|
value &= ~BIT(offset);
|
|
pdc_write(priv, REG_SOC_GPIO_CONTROL0, value);
|
|
}
|
|
|
|
value = pdc_read(priv, REG_SOC_GPIO_CONTROL1);
|
|
value &= ~BIT(offset);
|
|
pdc_write(priv, REG_SOC_GPIO_CONTROL1, value);
|
|
__global_unlock2(lstat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tz1090_pdc_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct tz1090_pdc_gpio *priv = to_pdc(chip);
|
|
return pdc_read(priv, REG_SOC_GPIO_STATUS) & BIT(offset);
|
|
}
|
|
|
|
static void tz1090_pdc_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int output_value)
|
|
{
|
|
struct tz1090_pdc_gpio *priv = to_pdc(chip);
|
|
u32 value;
|
|
int lstat;
|
|
|
|
/* EXT_POWER doesn't seem to have an output value bit */
|
|
if (offset >= 6)
|
|
return;
|
|
|
|
__global_lock2(lstat);
|
|
value = pdc_read(priv, REG_SOC_GPIO_CONTROL0);
|
|
if (output_value)
|
|
value |= BIT(offset);
|
|
else
|
|
value &= ~BIT(offset);
|
|
pdc_write(priv, REG_SOC_GPIO_CONTROL0, value);
|
|
__global_unlock2(lstat);
|
|
}
|
|
|
|
static int tz1090_pdc_gpio_request(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return pinctrl_request_gpio(chip->base + offset);
|
|
}
|
|
|
|
static void tz1090_pdc_gpio_free(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
pinctrl_free_gpio(chip->base + offset);
|
|
}
|
|
|
|
static int tz1090_pdc_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct tz1090_pdc_gpio *priv = to_pdc(chip);
|
|
unsigned int syswake = offset - GPIO_PDC_IRQ_FIRST;
|
|
int irq;
|
|
|
|
/* only syswakes have irqs */
|
|
if (syswake >= GPIO_PDC_NIRQ)
|
|
return -EINVAL;
|
|
|
|
irq = priv->irq[syswake];
|
|
if (!irq)
|
|
return -EINVAL;
|
|
|
|
return irq;
|
|
}
|
|
|
|
static int tz1090_pdc_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct resource *res_regs;
|
|
struct tz1090_pdc_gpio *priv;
|
|
unsigned int i;
|
|
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "must be instantiated via devicetree\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res_regs) {
|
|
dev_err(&pdev->dev, "cannot find registers resource\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(&pdev->dev, "unable to allocate driver data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Ioremap the registers */
|
|
priv->reg = devm_ioremap(&pdev->dev, res_regs->start,
|
|
res_regs->end - res_regs->start);
|
|
if (!priv->reg) {
|
|
dev_err(&pdev->dev, "unable to ioremap registers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Set up GPIO chip */
|
|
priv->chip.label = "tz1090-pdc-gpio";
|
|
priv->chip.dev = &pdev->dev;
|
|
priv->chip.direction_input = tz1090_pdc_gpio_direction_input;
|
|
priv->chip.direction_output = tz1090_pdc_gpio_direction_output;
|
|
priv->chip.get = tz1090_pdc_gpio_get;
|
|
priv->chip.set = tz1090_pdc_gpio_set;
|
|
priv->chip.free = tz1090_pdc_gpio_free;
|
|
priv->chip.request = tz1090_pdc_gpio_request;
|
|
priv->chip.to_irq = tz1090_pdc_gpio_to_irq;
|
|
priv->chip.of_node = np;
|
|
|
|
/* GPIO numbering */
|
|
priv->chip.base = GPIO_PDC_BASE;
|
|
priv->chip.ngpio = GPIO_PDC_NGPIO;
|
|
|
|
/* Map the syswake irqs */
|
|
for (i = 0; i < GPIO_PDC_NIRQ; ++i)
|
|
priv->irq[i] = irq_of_parse_and_map(np, i);
|
|
|
|
/* Add the GPIO bank */
|
|
gpiochip_add(&priv->chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id tz1090_pdc_gpio_of_match[] = {
|
|
{ .compatible = "img,tz1090-pdc-gpio" },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver tz1090_pdc_gpio_driver = {
|
|
.driver = {
|
|
.name = "tz1090-pdc-gpio",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = tz1090_pdc_gpio_of_match,
|
|
},
|
|
.probe = tz1090_pdc_gpio_probe,
|
|
};
|
|
|
|
static int __init tz1090_pdc_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&tz1090_pdc_gpio_driver);
|
|
}
|
|
subsys_initcall(tz1090_pdc_gpio_init);
|