linux_dsm_epyc7002/drivers/iio/humidity/hts221_buffer.c
Greg Kroah-Hartman 263771dbc8 Linux 5.8-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
 CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
 Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
 RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
 At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
 Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
 0+eXO4A=
 =9EpR
 -----END PGP SIGNATURE-----

Merge 5.8-rc6 into staging-next

We need the staging fixes in here, and it resolves a merge issue with an
iio driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20 09:37:31 +02:00

203 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* STMicroelectronics hts221 sensor driver
*
* Copyright 2016 STMicroelectronics Inc.
*
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irqreturn.h>
#include <linux/regmap.h>
#include <linux/bitfield.h>
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
#include <linux/iio/events.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/buffer.h>
#include <linux/platform_data/st_sensors_pdata.h>
#include "hts221.h"
#define HTS221_REG_DRDY_HL_ADDR 0x22
#define HTS221_REG_DRDY_HL_MASK BIT(7)
#define HTS221_REG_DRDY_PP_OD_ADDR 0x22
#define HTS221_REG_DRDY_PP_OD_MASK BIT(6)
#define HTS221_REG_DRDY_EN_ADDR 0x22
#define HTS221_REG_DRDY_EN_MASK BIT(2)
#define HTS221_REG_STATUS_ADDR 0x27
#define HTS221_RH_DRDY_MASK BIT(1)
#define HTS221_TEMP_DRDY_MASK BIT(0)
static int hts221_trig_set_state(struct iio_trigger *trig, bool state)
{
struct iio_dev *iio_dev = iio_trigger_get_drvdata(trig);
struct hts221_hw *hw = iio_priv(iio_dev);
return regmap_update_bits(hw->regmap, HTS221_REG_DRDY_EN_ADDR,
HTS221_REG_DRDY_EN_MASK,
FIELD_PREP(HTS221_REG_DRDY_EN_MASK, state));
}
static const struct iio_trigger_ops hts221_trigger_ops = {
.set_trigger_state = hts221_trig_set_state,
};
static irqreturn_t hts221_trigger_handler_thread(int irq, void *private)
{
struct hts221_hw *hw = private;
int err, status;
err = regmap_read(hw->regmap, HTS221_REG_STATUS_ADDR, &status);
if (err < 0)
return IRQ_HANDLED;
/*
* H_DA bit (humidity data available) is routed to DRDY line.
* Humidity sample is computed after temperature one.
* Here we can assume data channels are both available if H_DA bit
* is set in status register
*/
if (!(status & HTS221_RH_DRDY_MASK))
return IRQ_NONE;
iio_trigger_poll_chained(hw->trig);
return IRQ_HANDLED;
}
int hts221_allocate_trigger(struct iio_dev *iio_dev)
{
struct hts221_hw *hw = iio_priv(iio_dev);
struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev);
bool irq_active_low = false, open_drain = false;
unsigned long irq_type;
int err;
irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
switch (irq_type) {
case IRQF_TRIGGER_HIGH:
case IRQF_TRIGGER_RISING:
break;
case IRQF_TRIGGER_LOW:
case IRQF_TRIGGER_FALLING:
irq_active_low = true;
break;
default:
dev_info(hw->dev,
"mode %lx unsupported, using IRQF_TRIGGER_RISING\n",
irq_type);
irq_type = IRQF_TRIGGER_RISING;
break;
}
err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_HL_ADDR,
HTS221_REG_DRDY_HL_MASK,
FIELD_PREP(HTS221_REG_DRDY_HL_MASK,
irq_active_low));
if (err < 0)
return err;
if (device_property_read_bool(hw->dev, "drive-open-drain") ||
(pdata && pdata->open_drain)) {
irq_type |= IRQF_SHARED;
open_drain = true;
}
err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_PP_OD_ADDR,
HTS221_REG_DRDY_PP_OD_MASK,
FIELD_PREP(HTS221_REG_DRDY_PP_OD_MASK,
open_drain));
if (err < 0)
return err;
err = devm_request_threaded_irq(hw->dev, hw->irq, NULL,
hts221_trigger_handler_thread,
irq_type | IRQF_ONESHOT,
hw->name, hw);
if (err) {
dev_err(hw->dev, "failed to request trigger irq %d\n",
hw->irq);
return err;
}
hw->trig = devm_iio_trigger_alloc(hw->dev, "%s-trigger",
iio_dev->name);
if (!hw->trig)
return -ENOMEM;
iio_trigger_set_drvdata(hw->trig, iio_dev);
hw->trig->ops = &hts221_trigger_ops;
hw->trig->dev.parent = hw->dev;
iio_dev->trig = iio_trigger_get(hw->trig);
return devm_iio_trigger_register(hw->dev, hw->trig);
}
static int hts221_buffer_preenable(struct iio_dev *iio_dev)
{
return hts221_set_enable(iio_priv(iio_dev), true);
}
static int hts221_buffer_postdisable(struct iio_dev *iio_dev)
{
return hts221_set_enable(iio_priv(iio_dev), false);
}
static const struct iio_buffer_setup_ops hts221_buffer_ops = {
.preenable = hts221_buffer_preenable,
.postdisable = hts221_buffer_postdisable,
};
static irqreturn_t hts221_buffer_handler_thread(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *iio_dev = pf->indio_dev;
struct hts221_hw *hw = iio_priv(iio_dev);
struct iio_chan_spec const *ch;
int err;
/* humidity data */
ch = &iio_dev->channels[HTS221_SENSOR_H];
err = regmap_bulk_read(hw->regmap, ch->address,
&hw->scan.channels[0],
sizeof(hw->scan.channels[0]));
if (err < 0)
goto out;
/* temperature data */
ch = &iio_dev->channels[HTS221_SENSOR_T];
err = regmap_bulk_read(hw->regmap, ch->address,
&hw->scan.channels[1],
sizeof(hw->scan.channels[1]));
if (err < 0)
goto out;
iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan,
iio_get_time_ns(iio_dev));
out:
iio_trigger_notify_done(hw->trig);
return IRQ_HANDLED;
}
int hts221_allocate_buffers(struct iio_dev *iio_dev)
{
struct hts221_hw *hw = iio_priv(iio_dev);
return devm_iio_triggered_buffer_setup(hw->dev, iio_dev,
NULL, hts221_buffer_handler_thread,
&hts221_buffer_ops);
}
MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
MODULE_DESCRIPTION("STMicroelectronics hts221 buffer driver");
MODULE_LICENSE("GPL v2");