mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 06:06:40 +07:00
4bb2971134
With pm81/pm91/pm121, when the overtemperature state is entered, and when it remains on after skipped ticks, the driver will try to leave it too soon (immediately on the next tick). This is because the active FAILURE_OVERTEMP state is not visible in "new_failure" variable of the current tick. Furthermore, the driver will keep trying to clear condition in subsequent ticks as FAILURE_OVERTEMP remains set in the "last_failure" variable. These will start to trigger WARNINGS from windfarm core: [ 100.082735] windfarm: Clamping CPU frequency to minimum ! [ 100.108132] windfarm: Overtemp condition detected ! [ 101.952908] windfarm: Overtemp condition cleared ! [...] [ 102.980388] WARNING: at drivers/macintosh/windfarm_core.c:463 [...] [ 103.982227] WARNING: at drivers/macintosh/windfarm_core.c:463 [...] [ 105.030494] WARNING: at drivers/macintosh/windfarm_core.c:463 [...] [ 105.973666] WARNING: at drivers/macintosh/windfarm_core.c:463 [...] [ 106.977913] WARNING: at drivers/macintosh/windfarm_core.c:463 Fix by adding a helper global variable. We leave the overtemp state only after all failure bits have been cleared. I saw this error on iMac G5 iSight (pm121). Also pm81/pm91 are fixed based on the observation that these are almost identical/copy-pasted code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
814 lines
21 KiB
C
814 lines
21 KiB
C
/*
|
|
* Windfarm PowerMac thermal control. iMac G5
|
|
*
|
|
* (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* Released under the term of the GNU GPL v2.
|
|
*
|
|
* The algorithm used is the PID control algorithm, used the same
|
|
* way the published Darwin code does, using the same values that
|
|
* are present in the Darwin 8.2 snapshot property lists (note however
|
|
* that none of the code has been re-used, it's a complete re-implementation
|
|
*
|
|
* The various control loops found in Darwin config file are:
|
|
*
|
|
* PowerMac8,1 and PowerMac8,2
|
|
* ===========================
|
|
*
|
|
* System Fans control loop. Different based on models. In addition to the
|
|
* usual PID algorithm, the control loop gets 2 additional pairs of linear
|
|
* scaling factors (scale/offsets) expressed as 4.12 fixed point values
|
|
* signed offset, unsigned scale)
|
|
*
|
|
* The targets are modified such as:
|
|
* - the linked control (second control) gets the target value as-is
|
|
* (typically the drive fan)
|
|
* - the main control (first control) gets the target value scaled with
|
|
* the first pair of factors, and is then modified as below
|
|
* - the value of the target of the CPU Fan control loop is retrieved,
|
|
* scaled with the second pair of factors, and the max of that and
|
|
* the scaled target is applied to the main control.
|
|
*
|
|
* # model_id: 2
|
|
* controls : system-fan, drive-bay-fan
|
|
* sensors : hd-temp
|
|
* PID params : G_d = 0x15400000
|
|
* G_p = 0x00200000
|
|
* G_r = 0x000002fd
|
|
* History = 2 entries
|
|
* Input target = 0x3a0000
|
|
* Interval = 5s
|
|
* linear-factors : offset = 0xff38 scale = 0x0ccd
|
|
* offset = 0x0208 scale = 0x07ae
|
|
*
|
|
* # model_id: 3
|
|
* controls : system-fan, drive-bay-fan
|
|
* sensors : hd-temp
|
|
* PID params : G_d = 0x08e00000
|
|
* G_p = 0x00566666
|
|
* G_r = 0x0000072b
|
|
* History = 2 entries
|
|
* Input target = 0x350000
|
|
* Interval = 5s
|
|
* linear-factors : offset = 0xff38 scale = 0x0ccd
|
|
* offset = 0x0000 scale = 0x0000
|
|
*
|
|
* # model_id: 5
|
|
* controls : system-fan
|
|
* sensors : hd-temp
|
|
* PID params : G_d = 0x15400000
|
|
* G_p = 0x00233333
|
|
* G_r = 0x000002fd
|
|
* History = 2 entries
|
|
* Input target = 0x3a0000
|
|
* Interval = 5s
|
|
* linear-factors : offset = 0x0000 scale = 0x1000
|
|
* offset = 0x0091 scale = 0x0bae
|
|
*
|
|
* CPU Fan control loop. The loop is identical for all models. it
|
|
* has an additional pair of scaling factor. This is used to scale the
|
|
* systems fan control loop target result (the one before it gets scaled
|
|
* by the System Fans control loop itself). Then, the max value of the
|
|
* calculated target value and system fan value is sent to the fans
|
|
*
|
|
* controls : cpu-fan
|
|
* sensors : cpu-temp cpu-power
|
|
* PID params : From SMU sdb partition
|
|
* linear-factors : offset = 0xfb50 scale = 0x1000
|
|
*
|
|
* CPU Slew control loop. Not implemented. The cpufreq driver in linux is
|
|
* completely separate for now, though we could find a way to link it, either
|
|
* as a client reacting to overtemp notifications, or directling monitoring
|
|
* the CPU temperature
|
|
*
|
|
* WARNING ! The CPU control loop requires the CPU tmax for the current
|
|
* operating point. However, we currently are completely separated from
|
|
* the cpufreq driver and thus do not know what the current operating
|
|
* point is. Fortunately, we also do not have any hardware supporting anything
|
|
* but operating point 0 at the moment, thus we just peek that value directly
|
|
* from the SDB partition. If we ever end up with actually slewing the system
|
|
* clock and thus changing operating points, we'll have to find a way to
|
|
* communicate with the CPU freq driver;
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/io.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/smu.h>
|
|
|
|
#include "windfarm.h"
|
|
#include "windfarm_pid.h"
|
|
|
|
#define VERSION "0.4"
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(args...) printk(args)
|
|
#else
|
|
#define DBG(args...) do { } while(0)
|
|
#endif
|
|
|
|
/* define this to force CPU overtemp to 74 degree, useful for testing
|
|
* the overtemp code
|
|
*/
|
|
#undef HACKED_OVERTEMP
|
|
|
|
static int wf_smu_mach_model; /* machine model id */
|
|
|
|
/* Controls & sensors */
|
|
static struct wf_sensor *sensor_cpu_power;
|
|
static struct wf_sensor *sensor_cpu_temp;
|
|
static struct wf_sensor *sensor_hd_temp;
|
|
static struct wf_control *fan_cpu_main;
|
|
static struct wf_control *fan_hd;
|
|
static struct wf_control *fan_system;
|
|
static struct wf_control *cpufreq_clamp;
|
|
|
|
/* Set to kick the control loop into life */
|
|
static int wf_smu_all_controls_ok, wf_smu_all_sensors_ok, wf_smu_started;
|
|
|
|
/* Failure handling.. could be nicer */
|
|
#define FAILURE_FAN 0x01
|
|
#define FAILURE_SENSOR 0x02
|
|
#define FAILURE_OVERTEMP 0x04
|
|
|
|
static unsigned int wf_smu_failure_state;
|
|
static int wf_smu_readjust, wf_smu_skipping;
|
|
static bool wf_smu_overtemp;
|
|
|
|
/*
|
|
* ****** System Fans Control Loop ******
|
|
*
|
|
*/
|
|
|
|
/* Parameters for the System Fans control loop. Parameters
|
|
* not in this table such as interval, history size, ...
|
|
* are common to all versions and thus hard coded for now.
|
|
*/
|
|
struct wf_smu_sys_fans_param {
|
|
int model_id;
|
|
s32 itarget;
|
|
s32 gd, gp, gr;
|
|
|
|
s16 offset0;
|
|
u16 scale0;
|
|
s16 offset1;
|
|
u16 scale1;
|
|
};
|
|
|
|
#define WF_SMU_SYS_FANS_INTERVAL 5
|
|
#define WF_SMU_SYS_FANS_HISTORY_SIZE 2
|
|
|
|
/* State data used by the system fans control loop
|
|
*/
|
|
struct wf_smu_sys_fans_state {
|
|
int ticks;
|
|
s32 sys_setpoint;
|
|
s32 hd_setpoint;
|
|
s16 offset0;
|
|
u16 scale0;
|
|
s16 offset1;
|
|
u16 scale1;
|
|
struct wf_pid_state pid;
|
|
};
|
|
|
|
/*
|
|
* Configs for SMU System Fan control loop
|
|
*/
|
|
static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = {
|
|
/* Model ID 2 */
|
|
{
|
|
.model_id = 2,
|
|
.itarget = 0x3a0000,
|
|
.gd = 0x15400000,
|
|
.gp = 0x00200000,
|
|
.gr = 0x000002fd,
|
|
.offset0 = 0xff38,
|
|
.scale0 = 0x0ccd,
|
|
.offset1 = 0x0208,
|
|
.scale1 = 0x07ae,
|
|
},
|
|
/* Model ID 3 */
|
|
{
|
|
.model_id = 3,
|
|
.itarget = 0x350000,
|
|
.gd = 0x08e00000,
|
|
.gp = 0x00566666,
|
|
.gr = 0x0000072b,
|
|
.offset0 = 0xff38,
|
|
.scale0 = 0x0ccd,
|
|
.offset1 = 0x0000,
|
|
.scale1 = 0x0000,
|
|
},
|
|
/* Model ID 5 */
|
|
{
|
|
.model_id = 5,
|
|
.itarget = 0x3a0000,
|
|
.gd = 0x15400000,
|
|
.gp = 0x00233333,
|
|
.gr = 0x000002fd,
|
|
.offset0 = 0x0000,
|
|
.scale0 = 0x1000,
|
|
.offset1 = 0x0091,
|
|
.scale1 = 0x0bae,
|
|
},
|
|
};
|
|
#define WF_SMU_SYS_FANS_NUM_CONFIGS ARRAY_SIZE(wf_smu_sys_all_params)
|
|
|
|
static struct wf_smu_sys_fans_state *wf_smu_sys_fans;
|
|
|
|
/*
|
|
* ****** CPU Fans Control Loop ******
|
|
*
|
|
*/
|
|
|
|
|
|
#define WF_SMU_CPU_FANS_INTERVAL 1
|
|
#define WF_SMU_CPU_FANS_MAX_HISTORY 16
|
|
#define WF_SMU_CPU_FANS_SIBLING_SCALE 0x00001000
|
|
#define WF_SMU_CPU_FANS_SIBLING_OFFSET 0xfffffb50
|
|
|
|
/* State data used by the cpu fans control loop
|
|
*/
|
|
struct wf_smu_cpu_fans_state {
|
|
int ticks;
|
|
s32 cpu_setpoint;
|
|
s32 scale;
|
|
s32 offset;
|
|
struct wf_cpu_pid_state pid;
|
|
};
|
|
|
|
static struct wf_smu_cpu_fans_state *wf_smu_cpu_fans;
|
|
|
|
|
|
|
|
/*
|
|
* ***** Implementation *****
|
|
*
|
|
*/
|
|
|
|
static void wf_smu_create_sys_fans(void)
|
|
{
|
|
struct wf_smu_sys_fans_param *param = NULL;
|
|
struct wf_pid_param pid_param;
|
|
int i;
|
|
|
|
/* First, locate the params for this model */
|
|
for (i = 0; i < WF_SMU_SYS_FANS_NUM_CONFIGS; i++)
|
|
if (wf_smu_sys_all_params[i].model_id == wf_smu_mach_model) {
|
|
param = &wf_smu_sys_all_params[i];
|
|
break;
|
|
}
|
|
|
|
/* No params found, put fans to max */
|
|
if (param == NULL) {
|
|
printk(KERN_WARNING "windfarm: System fan config not found "
|
|
"for this machine model, max fan speed\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Alloc & initialize state */
|
|
wf_smu_sys_fans = kmalloc(sizeof(struct wf_smu_sys_fans_state),
|
|
GFP_KERNEL);
|
|
if (wf_smu_sys_fans == NULL) {
|
|
printk(KERN_WARNING "windfarm: Memory allocation error"
|
|
" max fan speed\n");
|
|
goto fail;
|
|
}
|
|
wf_smu_sys_fans->ticks = 1;
|
|
wf_smu_sys_fans->scale0 = param->scale0;
|
|
wf_smu_sys_fans->offset0 = param->offset0;
|
|
wf_smu_sys_fans->scale1 = param->scale1;
|
|
wf_smu_sys_fans->offset1 = param->offset1;
|
|
|
|
/* Fill PID params */
|
|
pid_param.gd = param->gd;
|
|
pid_param.gp = param->gp;
|
|
pid_param.gr = param->gr;
|
|
pid_param.interval = WF_SMU_SYS_FANS_INTERVAL;
|
|
pid_param.history_len = WF_SMU_SYS_FANS_HISTORY_SIZE;
|
|
pid_param.itarget = param->itarget;
|
|
pid_param.min = wf_control_get_min(fan_system);
|
|
pid_param.max = wf_control_get_max(fan_system);
|
|
if (fan_hd) {
|
|
pid_param.min =
|
|
max(pid_param.min, wf_control_get_min(fan_hd));
|
|
pid_param.max =
|
|
min(pid_param.max, wf_control_get_max(fan_hd));
|
|
}
|
|
wf_pid_init(&wf_smu_sys_fans->pid, &pid_param);
|
|
|
|
DBG("wf: System Fan control initialized.\n");
|
|
DBG(" itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
|
|
FIX32TOPRINT(pid_param.itarget), pid_param.min, pid_param.max);
|
|
return;
|
|
|
|
fail:
|
|
|
|
if (fan_system)
|
|
wf_control_set_max(fan_system);
|
|
if (fan_hd)
|
|
wf_control_set_max(fan_hd);
|
|
}
|
|
|
|
static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st)
|
|
{
|
|
s32 new_setpoint, temp, scaled, cputarget;
|
|
int rc;
|
|
|
|
if (--st->ticks != 0) {
|
|
if (wf_smu_readjust)
|
|
goto readjust;
|
|
return;
|
|
}
|
|
st->ticks = WF_SMU_SYS_FANS_INTERVAL;
|
|
|
|
rc = wf_sensor_get(sensor_hd_temp, &temp);
|
|
if (rc) {
|
|
printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
|
|
rc);
|
|
wf_smu_failure_state |= FAILURE_SENSOR;
|
|
return;
|
|
}
|
|
|
|
DBG("wf_smu: System Fans tick ! HD temp: %d.%03d\n",
|
|
FIX32TOPRINT(temp));
|
|
|
|
if (temp > (st->pid.param.itarget + 0x50000))
|
|
wf_smu_failure_state |= FAILURE_OVERTEMP;
|
|
|
|
new_setpoint = wf_pid_run(&st->pid, temp);
|
|
|
|
DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
|
|
|
|
scaled = ((((s64)new_setpoint) * (s64)st->scale0) >> 12) + st->offset0;
|
|
|
|
DBG("wf_smu: scaled setpoint: %d RPM\n", (int)scaled);
|
|
|
|
cputarget = wf_smu_cpu_fans ? wf_smu_cpu_fans->pid.target : 0;
|
|
cputarget = ((((s64)cputarget) * (s64)st->scale1) >> 12) + st->offset1;
|
|
scaled = max(scaled, cputarget);
|
|
scaled = max(scaled, st->pid.param.min);
|
|
scaled = min(scaled, st->pid.param.max);
|
|
|
|
DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)scaled);
|
|
|
|
if (st->sys_setpoint == scaled && new_setpoint == st->hd_setpoint)
|
|
return;
|
|
st->sys_setpoint = scaled;
|
|
st->hd_setpoint = new_setpoint;
|
|
readjust:
|
|
if (fan_system && wf_smu_failure_state == 0) {
|
|
rc = wf_control_set(fan_system, st->sys_setpoint);
|
|
if (rc) {
|
|
printk(KERN_WARNING "windfarm: Sys fan error %d\n",
|
|
rc);
|
|
wf_smu_failure_state |= FAILURE_FAN;
|
|
}
|
|
}
|
|
if (fan_hd && wf_smu_failure_state == 0) {
|
|
rc = wf_control_set(fan_hd, st->hd_setpoint);
|
|
if (rc) {
|
|
printk(KERN_WARNING "windfarm: HD fan error %d\n",
|
|
rc);
|
|
wf_smu_failure_state |= FAILURE_FAN;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void wf_smu_create_cpu_fans(void)
|
|
{
|
|
struct wf_cpu_pid_param pid_param;
|
|
const struct smu_sdbp_header *hdr;
|
|
struct smu_sdbp_cpupiddata *piddata;
|
|
struct smu_sdbp_fvt *fvt;
|
|
s32 tmax, tdelta, maxpow, powadj;
|
|
|
|
/* First, locate the PID params in SMU SBD */
|
|
hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
|
|
if (hdr == 0) {
|
|
printk(KERN_WARNING "windfarm: CPU PID fan config not found "
|
|
"max fan speed\n");
|
|
goto fail;
|
|
}
|
|
piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
|
|
|
|
/* Get the FVT params for operating point 0 (the only supported one
|
|
* for now) in order to get tmax
|
|
*/
|
|
hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
|
|
if (hdr) {
|
|
fvt = (struct smu_sdbp_fvt *)&hdr[1];
|
|
tmax = ((s32)fvt->maxtemp) << 16;
|
|
} else
|
|
tmax = 0x5e0000; /* 94 degree default */
|
|
|
|
/* Alloc & initialize state */
|
|
wf_smu_cpu_fans = kmalloc(sizeof(struct wf_smu_cpu_fans_state),
|
|
GFP_KERNEL);
|
|
if (wf_smu_cpu_fans == NULL)
|
|
goto fail;
|
|
wf_smu_cpu_fans->ticks = 1;
|
|
|
|
wf_smu_cpu_fans->scale = WF_SMU_CPU_FANS_SIBLING_SCALE;
|
|
wf_smu_cpu_fans->offset = WF_SMU_CPU_FANS_SIBLING_OFFSET;
|
|
|
|
/* Fill PID params */
|
|
pid_param.interval = WF_SMU_CPU_FANS_INTERVAL;
|
|
pid_param.history_len = piddata->history_len;
|
|
if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
|
|
printk(KERN_WARNING "windfarm: History size overflow on "
|
|
"CPU control loop (%d)\n", piddata->history_len);
|
|
pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
|
|
}
|
|
pid_param.gd = piddata->gd;
|
|
pid_param.gp = piddata->gp;
|
|
pid_param.gr = piddata->gr / pid_param.history_len;
|
|
|
|
tdelta = ((s32)piddata->target_temp_delta) << 16;
|
|
maxpow = ((s32)piddata->max_power) << 16;
|
|
powadj = ((s32)piddata->power_adj) << 16;
|
|
|
|
pid_param.tmax = tmax;
|
|
pid_param.ttarget = tmax - tdelta;
|
|
pid_param.pmaxadj = maxpow - powadj;
|
|
|
|
pid_param.min = wf_control_get_min(fan_cpu_main);
|
|
pid_param.max = wf_control_get_max(fan_cpu_main);
|
|
|
|
wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);
|
|
|
|
DBG("wf: CPU Fan control initialized.\n");
|
|
DBG(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM\n",
|
|
FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
|
|
pid_param.min, pid_param.max);
|
|
|
|
return;
|
|
|
|
fail:
|
|
printk(KERN_WARNING "windfarm: CPU fan config not found\n"
|
|
"for this machine model, max fan speed\n");
|
|
|
|
if (cpufreq_clamp)
|
|
wf_control_set_max(cpufreq_clamp);
|
|
if (fan_cpu_main)
|
|
wf_control_set_max(fan_cpu_main);
|
|
}
|
|
|
|
static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
|
|
{
|
|
s32 new_setpoint, temp, power, systarget;
|
|
int rc;
|
|
|
|
if (--st->ticks != 0) {
|
|
if (wf_smu_readjust)
|
|
goto readjust;
|
|
return;
|
|
}
|
|
st->ticks = WF_SMU_CPU_FANS_INTERVAL;
|
|
|
|
rc = wf_sensor_get(sensor_cpu_temp, &temp);
|
|
if (rc) {
|
|
printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
|
|
rc);
|
|
wf_smu_failure_state |= FAILURE_SENSOR;
|
|
return;
|
|
}
|
|
|
|
rc = wf_sensor_get(sensor_cpu_power, &power);
|
|
if (rc) {
|
|
printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
|
|
rc);
|
|
wf_smu_failure_state |= FAILURE_SENSOR;
|
|
return;
|
|
}
|
|
|
|
DBG("wf_smu: CPU Fans tick ! CPU temp: %d.%03d, power: %d.%03d\n",
|
|
FIX32TOPRINT(temp), FIX32TOPRINT(power));
|
|
|
|
#ifdef HACKED_OVERTEMP
|
|
if (temp > 0x4a0000)
|
|
wf_smu_failure_state |= FAILURE_OVERTEMP;
|
|
#else
|
|
if (temp > st->pid.param.tmax)
|
|
wf_smu_failure_state |= FAILURE_OVERTEMP;
|
|
#endif
|
|
new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);
|
|
|
|
DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
|
|
|
|
systarget = wf_smu_sys_fans ? wf_smu_sys_fans->pid.target : 0;
|
|
systarget = ((((s64)systarget) * (s64)st->scale) >> 12)
|
|
+ st->offset;
|
|
new_setpoint = max(new_setpoint, systarget);
|
|
new_setpoint = max(new_setpoint, st->pid.param.min);
|
|
new_setpoint = min(new_setpoint, st->pid.param.max);
|
|
|
|
DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)new_setpoint);
|
|
|
|
if (st->cpu_setpoint == new_setpoint)
|
|
return;
|
|
st->cpu_setpoint = new_setpoint;
|
|
readjust:
|
|
if (fan_cpu_main && wf_smu_failure_state == 0) {
|
|
rc = wf_control_set(fan_cpu_main, st->cpu_setpoint);
|
|
if (rc) {
|
|
printk(KERN_WARNING "windfarm: CPU main fan"
|
|
" error %d\n", rc);
|
|
wf_smu_failure_state |= FAILURE_FAN;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ****** Setup / Init / Misc ... ******
|
|
*
|
|
*/
|
|
|
|
static void wf_smu_tick(void)
|
|
{
|
|
unsigned int last_failure = wf_smu_failure_state;
|
|
unsigned int new_failure;
|
|
|
|
if (!wf_smu_started) {
|
|
DBG("wf: creating control loops !\n");
|
|
wf_smu_create_sys_fans();
|
|
wf_smu_create_cpu_fans();
|
|
wf_smu_started = 1;
|
|
}
|
|
|
|
/* Skipping ticks */
|
|
if (wf_smu_skipping && --wf_smu_skipping)
|
|
return;
|
|
|
|
wf_smu_failure_state = 0;
|
|
if (wf_smu_sys_fans)
|
|
wf_smu_sys_fans_tick(wf_smu_sys_fans);
|
|
if (wf_smu_cpu_fans)
|
|
wf_smu_cpu_fans_tick(wf_smu_cpu_fans);
|
|
|
|
wf_smu_readjust = 0;
|
|
new_failure = wf_smu_failure_state & ~last_failure;
|
|
|
|
/* If entering failure mode, clamp cpufreq and ramp all
|
|
* fans to full speed.
|
|
*/
|
|
if (wf_smu_failure_state && !last_failure) {
|
|
if (cpufreq_clamp)
|
|
wf_control_set_max(cpufreq_clamp);
|
|
if (fan_system)
|
|
wf_control_set_max(fan_system);
|
|
if (fan_cpu_main)
|
|
wf_control_set_max(fan_cpu_main);
|
|
if (fan_hd)
|
|
wf_control_set_max(fan_hd);
|
|
}
|
|
|
|
/* If leaving failure mode, unclamp cpufreq and readjust
|
|
* all fans on next iteration
|
|
*/
|
|
if (!wf_smu_failure_state && last_failure) {
|
|
if (cpufreq_clamp)
|
|
wf_control_set_min(cpufreq_clamp);
|
|
wf_smu_readjust = 1;
|
|
}
|
|
|
|
/* Overtemp condition detected, notify and start skipping a couple
|
|
* ticks to let the temperature go down
|
|
*/
|
|
if (new_failure & FAILURE_OVERTEMP) {
|
|
wf_set_overtemp();
|
|
wf_smu_skipping = 2;
|
|
wf_smu_overtemp = true;
|
|
}
|
|
|
|
/* We only clear the overtemp condition if overtemp is cleared
|
|
* _and_ no other failure is present. Since a sensor error will
|
|
* clear the overtemp condition (can't measure temperature) at
|
|
* the control loop levels, but we don't want to keep it clear
|
|
* here in this case
|
|
*/
|
|
if (!wf_smu_failure_state && wf_smu_overtemp) {
|
|
wf_clear_overtemp();
|
|
wf_smu_overtemp = false;
|
|
}
|
|
}
|
|
|
|
static void wf_smu_new_control(struct wf_control *ct)
|
|
{
|
|
if (wf_smu_all_controls_ok)
|
|
return;
|
|
|
|
if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) {
|
|
if (wf_get_control(ct) == 0)
|
|
fan_cpu_main = ct;
|
|
}
|
|
|
|
if (fan_system == NULL && !strcmp(ct->name, "system-fan")) {
|
|
if (wf_get_control(ct) == 0)
|
|
fan_system = ct;
|
|
}
|
|
|
|
if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
|
|
if (wf_get_control(ct) == 0)
|
|
cpufreq_clamp = ct;
|
|
}
|
|
|
|
/* Darwin property list says the HD fan is only for model ID
|
|
* 0, 1, 2 and 3
|
|
*/
|
|
|
|
if (wf_smu_mach_model > 3) {
|
|
if (fan_system && fan_cpu_main && cpufreq_clamp)
|
|
wf_smu_all_controls_ok = 1;
|
|
return;
|
|
}
|
|
|
|
if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
|
|
if (wf_get_control(ct) == 0)
|
|
fan_hd = ct;
|
|
}
|
|
|
|
if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp)
|
|
wf_smu_all_controls_ok = 1;
|
|
}
|
|
|
|
static void wf_smu_new_sensor(struct wf_sensor *sr)
|
|
{
|
|
if (wf_smu_all_sensors_ok)
|
|
return;
|
|
|
|
if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
|
|
if (wf_get_sensor(sr) == 0)
|
|
sensor_cpu_power = sr;
|
|
}
|
|
|
|
if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
|
|
if (wf_get_sensor(sr) == 0)
|
|
sensor_cpu_temp = sr;
|
|
}
|
|
|
|
if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
|
|
if (wf_get_sensor(sr) == 0)
|
|
sensor_hd_temp = sr;
|
|
}
|
|
|
|
if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp)
|
|
wf_smu_all_sensors_ok = 1;
|
|
}
|
|
|
|
|
|
static int wf_smu_notify(struct notifier_block *self,
|
|
unsigned long event, void *data)
|
|
{
|
|
switch(event) {
|
|
case WF_EVENT_NEW_CONTROL:
|
|
DBG("wf: new control %s detected\n",
|
|
((struct wf_control *)data)->name);
|
|
wf_smu_new_control(data);
|
|
wf_smu_readjust = 1;
|
|
break;
|
|
case WF_EVENT_NEW_SENSOR:
|
|
DBG("wf: new sensor %s detected\n",
|
|
((struct wf_sensor *)data)->name);
|
|
wf_smu_new_sensor(data);
|
|
break;
|
|
case WF_EVENT_TICK:
|
|
if (wf_smu_all_controls_ok && wf_smu_all_sensors_ok)
|
|
wf_smu_tick();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block wf_smu_events = {
|
|
.notifier_call = wf_smu_notify,
|
|
};
|
|
|
|
static int wf_init_pm(void)
|
|
{
|
|
const struct smu_sdbp_header *hdr;
|
|
|
|
hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
|
|
if (hdr != 0) {
|
|
struct smu_sdbp_sensortree *st =
|
|
(struct smu_sdbp_sensortree *)&hdr[1];
|
|
wf_smu_mach_model = st->model_id;
|
|
}
|
|
|
|
printk(KERN_INFO "windfarm: Initializing for iMacG5 model ID %d\n",
|
|
wf_smu_mach_model);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wf_smu_probe(struct platform_device *ddev)
|
|
{
|
|
wf_register_client(&wf_smu_events);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wf_smu_remove(struct platform_device *ddev)
|
|
{
|
|
wf_unregister_client(&wf_smu_events);
|
|
|
|
/* XXX We don't have yet a guarantee that our callback isn't
|
|
* in progress when returning from wf_unregister_client, so
|
|
* we add an arbitrary delay. I'll have to fix that in the core
|
|
*/
|
|
msleep(1000);
|
|
|
|
/* Release all sensors */
|
|
/* One more crappy race: I don't think we have any guarantee here
|
|
* that the attribute callback won't race with the sensor beeing
|
|
* disposed of, and I'm not 100% certain what best way to deal
|
|
* with that except by adding locks all over... I'll do that
|
|
* eventually but heh, who ever rmmod this module anyway ?
|
|
*/
|
|
if (sensor_cpu_power)
|
|
wf_put_sensor(sensor_cpu_power);
|
|
if (sensor_cpu_temp)
|
|
wf_put_sensor(sensor_cpu_temp);
|
|
if (sensor_hd_temp)
|
|
wf_put_sensor(sensor_hd_temp);
|
|
|
|
/* Release all controls */
|
|
if (fan_cpu_main)
|
|
wf_put_control(fan_cpu_main);
|
|
if (fan_hd)
|
|
wf_put_control(fan_hd);
|
|
if (fan_system)
|
|
wf_put_control(fan_system);
|
|
if (cpufreq_clamp)
|
|
wf_put_control(cpufreq_clamp);
|
|
|
|
/* Destroy control loops state structures */
|
|
kfree(wf_smu_sys_fans);
|
|
kfree(wf_smu_cpu_fans);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver wf_smu_driver = {
|
|
.probe = wf_smu_probe,
|
|
.remove = wf_smu_remove,
|
|
.driver = {
|
|
.name = "windfarm",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
|
|
static int __init wf_smu_init(void)
|
|
{
|
|
int rc = -ENODEV;
|
|
|
|
if (of_machine_is_compatible("PowerMac8,1") ||
|
|
of_machine_is_compatible("PowerMac8,2"))
|
|
rc = wf_init_pm();
|
|
|
|
if (rc == 0) {
|
|
#ifdef MODULE
|
|
request_module("windfarm_smu_controls");
|
|
request_module("windfarm_smu_sensors");
|
|
request_module("windfarm_lm75_sensor");
|
|
request_module("windfarm_cpufreq_clamp");
|
|
|
|
#endif /* MODULE */
|
|
platform_driver_register(&wf_smu_driver);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void __exit wf_smu_exit(void)
|
|
{
|
|
|
|
platform_driver_unregister(&wf_smu_driver);
|
|
}
|
|
|
|
|
|
module_init(wf_smu_init);
|
|
module_exit(wf_smu_exit);
|
|
|
|
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
|
|
MODULE_DESCRIPTION("Thermal control logic for iMac G5");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:windfarm");
|