mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 05:10:51 +07:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
1810 lines
44 KiB
C
1810 lines
44 KiB
C
/*
|
|
* linux/drivers/char/riscom.c -- RISCom/8 multiport serial driver.
|
|
*
|
|
* Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
|
|
*
|
|
* This code is loosely based on the Linux serial driver, written by
|
|
* Linus Torvalds, Theodore T'so and others. The RISCom/8 card
|
|
* programming info was obtained from various drivers for other OSes
|
|
* (FreeBSD, ISC, etc), but no source code from those drivers were
|
|
* directly included in this driver.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Revision 1.1
|
|
*
|
|
* ChangeLog:
|
|
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
|
|
* - get rid of check_region and several cleanups
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/major.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "riscom8.h"
|
|
#include "riscom8_reg.h"
|
|
|
|
/* Am I paranoid or not ? ;-) */
|
|
#define RISCOM_PARANOIA_CHECK
|
|
|
|
/*
|
|
* Crazy InteliCom/8 boards sometimes has swapped CTS & DSR signals.
|
|
* You can slightly speed up things by #undefing the following option,
|
|
* if you are REALLY sure that your board is correct one.
|
|
*/
|
|
|
|
#define RISCOM_BRAIN_DAMAGED_CTS
|
|
|
|
/*
|
|
* The following defines are mostly for testing purposes. But if you need
|
|
* some nice reporting in your syslog, you can define them also.
|
|
*/
|
|
#undef RC_REPORT_FIFO
|
|
#undef RC_REPORT_OVERRUN
|
|
|
|
|
|
#define RISCOM_LEGAL_FLAGS \
|
|
(ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \
|
|
ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
|
|
ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
|
|
|
|
#define RS_EVENT_WRITE_WAKEUP 0
|
|
|
|
static struct riscom_board * IRQ_to_board[16];
|
|
static struct tty_driver *riscom_driver;
|
|
static unsigned char * tmp_buf;
|
|
static DECLARE_MUTEX(tmp_buf_sem);
|
|
|
|
static unsigned long baud_table[] = {
|
|
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
|
|
9600, 19200, 38400, 57600, 76800, 0,
|
|
};
|
|
|
|
static struct riscom_board rc_board[RC_NBOARD] = {
|
|
{
|
|
.base = RC_IOBASE1,
|
|
},
|
|
{
|
|
.base = RC_IOBASE2,
|
|
},
|
|
{
|
|
.base = RC_IOBASE3,
|
|
},
|
|
{
|
|
.base = RC_IOBASE4,
|
|
},
|
|
};
|
|
|
|
static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
|
|
|
|
/* RISCom/8 I/O ports addresses (without address translation) */
|
|
static unsigned short rc_ioport[] = {
|
|
#if 1
|
|
0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
|
|
#else
|
|
0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
|
|
0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
|
|
0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
|
|
#endif
|
|
};
|
|
#define RC_NIOPORT (sizeof(rc_ioport) / sizeof(rc_ioport[0]))
|
|
|
|
|
|
static inline int rc_paranoia_check(struct riscom_port const * port,
|
|
char *name, const char *routine)
|
|
{
|
|
#ifdef RISCOM_PARANOIA_CHECK
|
|
static const char badmagic[] = KERN_INFO
|
|
"rc: Warning: bad riscom port magic number for device %s in %s\n";
|
|
static const char badinfo[] = KERN_INFO
|
|
"rc: Warning: null riscom port for device %s in %s\n";
|
|
|
|
if (!port) {
|
|
printk(badinfo, name, routine);
|
|
return 1;
|
|
}
|
|
if (port->magic != RISCOM8_MAGIC) {
|
|
printk(badmagic, name, routine);
|
|
return 1;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
*
|
|
* Service functions for RISCom/8 driver.
|
|
*
|
|
*/
|
|
|
|
/* Get board number from pointer */
|
|
static inline int board_No (struct riscom_board const * bp)
|
|
{
|
|
return bp - rc_board;
|
|
}
|
|
|
|
/* Get port number from pointer */
|
|
static inline int port_No (struct riscom_port const * port)
|
|
{
|
|
return RC_PORT(port - rc_port);
|
|
}
|
|
|
|
/* Get pointer to board from pointer to port */
|
|
static inline struct riscom_board * port_Board(struct riscom_port const * port)
|
|
{
|
|
return &rc_board[RC_BOARD(port - rc_port)];
|
|
}
|
|
|
|
/* Input Byte from CL CD180 register */
|
|
static inline unsigned char rc_in(struct riscom_board const * bp, unsigned short reg)
|
|
{
|
|
return inb(bp->base + RC_TO_ISA(reg));
|
|
}
|
|
|
|
/* Output Byte to CL CD180 register */
|
|
static inline void rc_out(struct riscom_board const * bp, unsigned short reg,
|
|
unsigned char val)
|
|
{
|
|
outb(val, bp->base + RC_TO_ISA(reg));
|
|
}
|
|
|
|
/* Wait for Channel Command Register ready */
|
|
static inline void rc_wait_CCR(struct riscom_board const * bp)
|
|
{
|
|
unsigned long delay;
|
|
|
|
/* FIXME: need something more descriptive then 100000 :) */
|
|
for (delay = 100000; delay; delay--)
|
|
if (!rc_in(bp, CD180_CCR))
|
|
return;
|
|
|
|
printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
|
|
}
|
|
|
|
/*
|
|
* RISCom/8 probe functions.
|
|
*/
|
|
|
|
static inline int rc_request_io_range(struct riscom_board * const bp)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < RC_NIOPORT; i++)
|
|
if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
|
|
"RISCom/8")) {
|
|
goto out_release;
|
|
}
|
|
return 0;
|
|
out_release:
|
|
printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
|
|
board_No(bp), bp->base);
|
|
while(--i >= 0)
|
|
release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
|
|
return 1;
|
|
}
|
|
|
|
static inline void rc_release_io_range(struct riscom_board * const bp)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < RC_NIOPORT; i++)
|
|
release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
|
|
}
|
|
|
|
/* Must be called with enabled interrupts */
|
|
static inline void rc_long_delay(unsigned long delay)
|
|
{
|
|
unsigned long i;
|
|
|
|
for (i = jiffies + delay; time_after(i,jiffies); ) ;
|
|
}
|
|
|
|
/* Reset and setup CD180 chip */
|
|
static void __init rc_init_CD180(struct riscom_board const * bp)
|
|
{
|
|
unsigned long flags;
|
|
|
|
save_flags(flags); cli();
|
|
rc_out(bp, RC_CTOUT, 0); /* Clear timeout */
|
|
rc_wait_CCR(bp); /* Wait for CCR ready */
|
|
rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */
|
|
sti();
|
|
rc_long_delay(HZ/20); /* Delay 0.05 sec */
|
|
cli();
|
|
rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */
|
|
rc_out(bp, CD180_GICR, 0); /* Clear all bits */
|
|
rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */
|
|
rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for transmitter intr */
|
|
rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for receiver intr */
|
|
|
|
/* Setting up prescaler. We need 4 ticks per 1 ms */
|
|
rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
|
|
rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
|
|
|
|
restore_flags(flags);
|
|
}
|
|
|
|
/* Main probing routine, also sets irq. */
|
|
static int __init rc_probe(struct riscom_board *bp)
|
|
{
|
|
unsigned char val1, val2;
|
|
int irqs = 0;
|
|
int retries;
|
|
|
|
bp->irq = 0;
|
|
|
|
if (rc_request_io_range(bp))
|
|
return 1;
|
|
|
|
/* Are the I/O ports here ? */
|
|
rc_out(bp, CD180_PPRL, 0x5a);
|
|
outb(0xff, 0x80);
|
|
val1 = rc_in(bp, CD180_PPRL);
|
|
rc_out(bp, CD180_PPRL, 0xa5);
|
|
outb(0x00, 0x80);
|
|
val2 = rc_in(bp, CD180_PPRL);
|
|
|
|
if ((val1 != 0x5a) || (val2 != 0xa5)) {
|
|
printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
|
|
board_No(bp), bp->base);
|
|
goto out_release;
|
|
}
|
|
|
|
/* It's time to find IRQ for this board */
|
|
for (retries = 0; retries < 5 && irqs <= 0; retries++) {
|
|
irqs = probe_irq_on();
|
|
rc_init_CD180(bp); /* Reset CD180 chip */
|
|
rc_out(bp, CD180_CAR, 2); /* Select port 2 */
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */
|
|
rc_out(bp, CD180_IER, IER_TXRDY); /* Enable tx empty intr */
|
|
rc_long_delay(HZ/20);
|
|
irqs = probe_irq_off(irqs);
|
|
val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */
|
|
val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */
|
|
rc_init_CD180(bp); /* Reset CD180 again */
|
|
|
|
if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) {
|
|
printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
|
|
"found.\n", board_No(bp), bp->base);
|
|
goto out_release;
|
|
}
|
|
}
|
|
|
|
if (irqs <= 0) {
|
|
printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
|
|
"at 0x%03x.\n", board_No(bp), bp->base);
|
|
goto out_release;
|
|
}
|
|
bp->irq = irqs;
|
|
bp->flags |= RC_BOARD_PRESENT;
|
|
|
|
printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
|
|
"0x%03x, IRQ %d.\n",
|
|
board_No(bp),
|
|
(rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */
|
|
bp->base, bp->irq);
|
|
|
|
return 0;
|
|
out_release:
|
|
rc_release_io_range(bp);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
*
|
|
* Interrupt processing routines.
|
|
*
|
|
*/
|
|
|
|
static inline void rc_mark_event(struct riscom_port * port, int event)
|
|
{
|
|
set_bit(event, &port->event);
|
|
schedule_work(&port->tqueue);
|
|
}
|
|
|
|
static inline struct riscom_port * rc_get_port(struct riscom_board const * bp,
|
|
unsigned char const * what)
|
|
{
|
|
unsigned char channel;
|
|
struct riscom_port * port;
|
|
|
|
channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
|
|
if (channel < CD180_NCH) {
|
|
port = &rc_port[board_No(bp) * RC_NPORT + channel];
|
|
if (port->flags & ASYNC_INITIALIZED) {
|
|
return port;
|
|
}
|
|
}
|
|
printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
|
|
board_No(bp), what, channel);
|
|
return NULL;
|
|
}
|
|
|
|
static inline void rc_receive_exc(struct riscom_board const * bp)
|
|
{
|
|
struct riscom_port *port;
|
|
struct tty_struct *tty;
|
|
unsigned char status;
|
|
unsigned char ch;
|
|
|
|
if (!(port = rc_get_port(bp, "Receive")))
|
|
return;
|
|
|
|
tty = port->tty;
|
|
if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
|
|
printk(KERN_WARNING "rc%d: port %d: Working around flip "
|
|
"buffer overflow.\n",
|
|
board_No(bp), port_No(port));
|
|
return;
|
|
}
|
|
|
|
#ifdef RC_REPORT_OVERRUN
|
|
status = rc_in(bp, CD180_RCSR);
|
|
if (status & RCSR_OE) {
|
|
port->overrun++;
|
|
#if 0
|
|
printk(KERN_ERR "rc%d: port %d: Overrun. Total %ld overruns\n",
|
|
board_No(bp), port_No(port), port->overrun);
|
|
#endif
|
|
}
|
|
status &= port->mark_mask;
|
|
#else
|
|
status = rc_in(bp, CD180_RCSR) & port->mark_mask;
|
|
#endif
|
|
ch = rc_in(bp, CD180_RDR);
|
|
if (!status) {
|
|
return;
|
|
}
|
|
if (status & RCSR_TOUT) {
|
|
printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
|
|
"Hardware problems ?\n",
|
|
board_No(bp), port_No(port));
|
|
return;
|
|
|
|
} else if (status & RCSR_BREAK) {
|
|
printk(KERN_INFO "rc%d: port %d: Handling break...\n",
|
|
board_No(bp), port_No(port));
|
|
*tty->flip.flag_buf_ptr++ = TTY_BREAK;
|
|
if (port->flags & ASYNC_SAK)
|
|
do_SAK(tty);
|
|
|
|
} else if (status & RCSR_PE)
|
|
*tty->flip.flag_buf_ptr++ = TTY_PARITY;
|
|
|
|
else if (status & RCSR_FE)
|
|
*tty->flip.flag_buf_ptr++ = TTY_FRAME;
|
|
|
|
else if (status & RCSR_OE)
|
|
*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
|
|
|
|
else
|
|
*tty->flip.flag_buf_ptr++ = 0;
|
|
|
|
*tty->flip.char_buf_ptr++ = ch;
|
|
tty->flip.count++;
|
|
schedule_delayed_work(&tty->flip.work, 1);
|
|
}
|
|
|
|
static inline void rc_receive(struct riscom_board const * bp)
|
|
{
|
|
struct riscom_port *port;
|
|
struct tty_struct *tty;
|
|
unsigned char count;
|
|
|
|
if (!(port = rc_get_port(bp, "Receive")))
|
|
return;
|
|
|
|
tty = port->tty;
|
|
|
|
count = rc_in(bp, CD180_RDCR);
|
|
|
|
#ifdef RC_REPORT_FIFO
|
|
port->hits[count > 8 ? 9 : count]++;
|
|
#endif
|
|
|
|
while (count--) {
|
|
if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
|
|
printk(KERN_WARNING "rc%d: port %d: Working around "
|
|
"flip buffer overflow.\n",
|
|
board_No(bp), port_No(port));
|
|
break;
|
|
}
|
|
*tty->flip.char_buf_ptr++ = rc_in(bp, CD180_RDR);
|
|
*tty->flip.flag_buf_ptr++ = 0;
|
|
tty->flip.count++;
|
|
}
|
|
schedule_delayed_work(&tty->flip.work, 1);
|
|
}
|
|
|
|
static inline void rc_transmit(struct riscom_board const * bp)
|
|
{
|
|
struct riscom_port *port;
|
|
struct tty_struct *tty;
|
|
unsigned char count;
|
|
|
|
|
|
if (!(port = rc_get_port(bp, "Transmit")))
|
|
return;
|
|
|
|
tty = port->tty;
|
|
|
|
if (port->IER & IER_TXEMPTY) {
|
|
/* FIFO drained */
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
port->IER &= ~IER_TXEMPTY;
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
return;
|
|
}
|
|
|
|
if ((port->xmit_cnt <= 0 && !port->break_length)
|
|
|| tty->stopped || tty->hw_stopped) {
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
port->IER &= ~IER_TXRDY;
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
return;
|
|
}
|
|
|
|
if (port->break_length) {
|
|
if (port->break_length > 0) {
|
|
if (port->COR2 & COR2_ETC) {
|
|
rc_out(bp, CD180_TDR, CD180_C_ESC);
|
|
rc_out(bp, CD180_TDR, CD180_C_SBRK);
|
|
port->COR2 &= ~COR2_ETC;
|
|
}
|
|
count = min_t(int, port->break_length, 0xff);
|
|
rc_out(bp, CD180_TDR, CD180_C_ESC);
|
|
rc_out(bp, CD180_TDR, CD180_C_DELAY);
|
|
rc_out(bp, CD180_TDR, count);
|
|
if (!(port->break_length -= count))
|
|
port->break_length--;
|
|
} else {
|
|
rc_out(bp, CD180_TDR, CD180_C_ESC);
|
|
rc_out(bp, CD180_TDR, CD180_C_EBRK);
|
|
rc_out(bp, CD180_COR2, port->COR2);
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_CORCHG2);
|
|
port->break_length = 0;
|
|
}
|
|
return;
|
|
}
|
|
|
|
count = CD180_NFIFO;
|
|
do {
|
|
rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]);
|
|
port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
|
|
if (--port->xmit_cnt <= 0)
|
|
break;
|
|
} while (--count > 0);
|
|
|
|
if (port->xmit_cnt <= 0) {
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
port->IER &= ~IER_TXRDY;
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
}
|
|
if (port->xmit_cnt <= port->wakeup_chars)
|
|
rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
|
|
}
|
|
|
|
static inline void rc_check_modem(struct riscom_board const * bp)
|
|
{
|
|
struct riscom_port *port;
|
|
struct tty_struct *tty;
|
|
unsigned char mcr;
|
|
|
|
if (!(port = rc_get_port(bp, "Modem")))
|
|
return;
|
|
|
|
tty = port->tty;
|
|
|
|
mcr = rc_in(bp, CD180_MCR);
|
|
if (mcr & MCR_CDCHG) {
|
|
if (rc_in(bp, CD180_MSVR) & MSVR_CD)
|
|
wake_up_interruptible(&port->open_wait);
|
|
else
|
|
schedule_work(&port->tqueue_hangup);
|
|
}
|
|
|
|
#ifdef RISCOM_BRAIN_DAMAGED_CTS
|
|
if (mcr & MCR_CTSCHG) {
|
|
if (rc_in(bp, CD180_MSVR) & MSVR_CTS) {
|
|
tty->hw_stopped = 0;
|
|
port->IER |= IER_TXRDY;
|
|
if (port->xmit_cnt <= port->wakeup_chars)
|
|
rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
|
|
} else {
|
|
tty->hw_stopped = 1;
|
|
port->IER &= ~IER_TXRDY;
|
|
}
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
}
|
|
if (mcr & MCR_DSRCHG) {
|
|
if (rc_in(bp, CD180_MSVR) & MSVR_DSR) {
|
|
tty->hw_stopped = 0;
|
|
port->IER |= IER_TXRDY;
|
|
if (port->xmit_cnt <= port->wakeup_chars)
|
|
rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
|
|
} else {
|
|
tty->hw_stopped = 1;
|
|
port->IER &= ~IER_TXRDY;
|
|
}
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
}
|
|
#endif /* RISCOM_BRAIN_DAMAGED_CTS */
|
|
|
|
/* Clear change bits */
|
|
rc_out(bp, CD180_MCR, 0);
|
|
}
|
|
|
|
/* The main interrupt processing routine */
|
|
static irqreturn_t rc_interrupt(int irq, void * dev_id, struct pt_regs * regs)
|
|
{
|
|
unsigned char status;
|
|
unsigned char ack;
|
|
struct riscom_board *bp;
|
|
unsigned long loop = 0;
|
|
int handled = 0;
|
|
|
|
bp = IRQ_to_board[irq];
|
|
|
|
if (!bp || !(bp->flags & RC_BOARD_ACTIVE)) {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
|
|
(RC_BSR_TOUT | RC_BSR_TINT |
|
|
RC_BSR_MINT | RC_BSR_RINT))) {
|
|
handled = 1;
|
|
if (status & RC_BSR_TOUT)
|
|
printk(KERN_WARNING "rc%d: Got timeout. Hardware "
|
|
"error?\n", board_No(bp));
|
|
|
|
else if (status & RC_BSR_RINT) {
|
|
ack = rc_in(bp, RC_ACK_RINT);
|
|
|
|
if (ack == (RC_ID | GIVR_IT_RCV))
|
|
rc_receive(bp);
|
|
else if (ack == (RC_ID | GIVR_IT_REXC))
|
|
rc_receive_exc(bp);
|
|
else
|
|
printk(KERN_WARNING "rc%d: Bad receive ack "
|
|
"0x%02x.\n",
|
|
board_No(bp), ack);
|
|
|
|
} else if (status & RC_BSR_TINT) {
|
|
ack = rc_in(bp, RC_ACK_TINT);
|
|
|
|
if (ack == (RC_ID | GIVR_IT_TX))
|
|
rc_transmit(bp);
|
|
else
|
|
printk(KERN_WARNING "rc%d: Bad transmit ack "
|
|
"0x%02x.\n",
|
|
board_No(bp), ack);
|
|
|
|
} else /* if (status & RC_BSR_MINT) */ {
|
|
ack = rc_in(bp, RC_ACK_MINT);
|
|
|
|
if (ack == (RC_ID | GIVR_IT_MODEM))
|
|
rc_check_modem(bp);
|
|
else
|
|
printk(KERN_WARNING "rc%d: Bad modem ack "
|
|
"0x%02x.\n",
|
|
board_No(bp), ack);
|
|
|
|
}
|
|
|
|
rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */
|
|
rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */
|
|
}
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*
|
|
* Routines for open & close processing.
|
|
*/
|
|
|
|
/* Called with disabled interrupts */
|
|
static inline int rc_setup_board(struct riscom_board * bp)
|
|
{
|
|
int error;
|
|
|
|
if (bp->flags & RC_BOARD_ACTIVE)
|
|
return 0;
|
|
|
|
error = request_irq(bp->irq, rc_interrupt, SA_INTERRUPT,
|
|
"RISCom/8", NULL);
|
|
if (error)
|
|
return error;
|
|
|
|
rc_out(bp, RC_CTOUT, 0); /* Just in case */
|
|
bp->DTR = ~0;
|
|
rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
|
|
|
|
IRQ_to_board[bp->irq] = bp;
|
|
bp->flags |= RC_BOARD_ACTIVE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called with disabled interrupts */
|
|
static inline void rc_shutdown_board(struct riscom_board *bp)
|
|
{
|
|
if (!(bp->flags & RC_BOARD_ACTIVE))
|
|
return;
|
|
|
|
bp->flags &= ~RC_BOARD_ACTIVE;
|
|
|
|
free_irq(bp->irq, NULL);
|
|
IRQ_to_board[bp->irq] = NULL;
|
|
|
|
bp->DTR = ~0;
|
|
rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
|
|
|
|
}
|
|
|
|
/*
|
|
* Setting up port characteristics.
|
|
* Must be called with disabled interrupts
|
|
*/
|
|
static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
|
|
{
|
|
struct tty_struct *tty;
|
|
unsigned long baud;
|
|
long tmp;
|
|
unsigned char cor1 = 0, cor3 = 0;
|
|
unsigned char mcor1 = 0, mcor2 = 0;
|
|
|
|
if (!(tty = port->tty) || !tty->termios)
|
|
return;
|
|
|
|
port->IER = 0;
|
|
port->COR2 = 0;
|
|
port->MSVR = MSVR_RTS;
|
|
|
|
baud = C_BAUD(tty);
|
|
|
|
if (baud & CBAUDEX) {
|
|
baud &= ~CBAUDEX;
|
|
if (baud < 1 || baud > 2)
|
|
port->tty->termios->c_cflag &= ~CBAUDEX;
|
|
else
|
|
baud += 15;
|
|
}
|
|
if (baud == 15) {
|
|
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
|
|
baud ++;
|
|
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
|
|
baud += 2;
|
|
}
|
|
|
|
/* Select port on the board */
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
|
|
if (!baud_table[baud]) {
|
|
/* Drop DTR & exit */
|
|
bp->DTR |= (1u << port_No(port));
|
|
rc_out(bp, RC_DTR, bp->DTR);
|
|
return;
|
|
} else {
|
|
/* Set DTR on */
|
|
bp->DTR &= ~(1u << port_No(port));
|
|
rc_out(bp, RC_DTR, bp->DTR);
|
|
}
|
|
|
|
/*
|
|
* Now we must calculate some speed depended things
|
|
*/
|
|
|
|
/* Set baud rate for port */
|
|
tmp = (((RC_OSCFREQ + baud_table[baud]/2) / baud_table[baud] +
|
|
CD180_TPC/2) / CD180_TPC);
|
|
|
|
rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
|
|
rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
|
|
rc_out(bp, CD180_RBPRL, tmp & 0xff);
|
|
rc_out(bp, CD180_TBPRL, tmp & 0xff);
|
|
|
|
baud = (baud_table[baud] + 5) / 10; /* Estimated CPS */
|
|
|
|
/* Two timer ticks seems enough to wakeup something like SLIP driver */
|
|
tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
|
|
port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
|
|
SERIAL_XMIT_SIZE - 1 : tmp);
|
|
|
|
/* Receiver timeout will be transmission time for 1.5 chars */
|
|
tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
|
|
tmp = (tmp > 0xff) ? 0xff : tmp;
|
|
rc_out(bp, CD180_RTPR, tmp);
|
|
|
|
switch (C_CSIZE(tty)) {
|
|
case CS5:
|
|
cor1 |= COR1_5BITS;
|
|
break;
|
|
case CS6:
|
|
cor1 |= COR1_6BITS;
|
|
break;
|
|
case CS7:
|
|
cor1 |= COR1_7BITS;
|
|
break;
|
|
case CS8:
|
|
cor1 |= COR1_8BITS;
|
|
break;
|
|
}
|
|
|
|
if (C_CSTOPB(tty))
|
|
cor1 |= COR1_2SB;
|
|
|
|
cor1 |= COR1_IGNORE;
|
|
if (C_PARENB(tty)) {
|
|
cor1 |= COR1_NORMPAR;
|
|
if (C_PARODD(tty))
|
|
cor1 |= COR1_ODDP;
|
|
if (I_INPCK(tty))
|
|
cor1 &= ~COR1_IGNORE;
|
|
}
|
|
/* Set marking of some errors */
|
|
port->mark_mask = RCSR_OE | RCSR_TOUT;
|
|
if (I_INPCK(tty))
|
|
port->mark_mask |= RCSR_FE | RCSR_PE;
|
|
if (I_BRKINT(tty) || I_PARMRK(tty))
|
|
port->mark_mask |= RCSR_BREAK;
|
|
if (I_IGNPAR(tty))
|
|
port->mark_mask &= ~(RCSR_FE | RCSR_PE);
|
|
if (I_IGNBRK(tty)) {
|
|
port->mark_mask &= ~RCSR_BREAK;
|
|
if (I_IGNPAR(tty))
|
|
/* Real raw mode. Ignore all */
|
|
port->mark_mask &= ~RCSR_OE;
|
|
}
|
|
/* Enable Hardware Flow Control */
|
|
if (C_CRTSCTS(tty)) {
|
|
#ifdef RISCOM_BRAIN_DAMAGED_CTS
|
|
port->IER |= IER_DSR | IER_CTS;
|
|
mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
|
|
mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
|
|
tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR));
|
|
#else
|
|
port->COR2 |= COR2_CTSAE;
|
|
#endif
|
|
}
|
|
/* Enable Software Flow Control. FIXME: I'm not sure about this */
|
|
/* Some people reported that it works, but I still doubt */
|
|
if (I_IXON(tty)) {
|
|
port->COR2 |= COR2_TXIBE;
|
|
cor3 |= (COR3_FCT | COR3_SCDE);
|
|
if (I_IXANY(tty))
|
|
port->COR2 |= COR2_IXM;
|
|
rc_out(bp, CD180_SCHR1, START_CHAR(tty));
|
|
rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
|
|
rc_out(bp, CD180_SCHR3, START_CHAR(tty));
|
|
rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
|
|
}
|
|
if (!C_CLOCAL(tty)) {
|
|
/* Enable CD check */
|
|
port->IER |= IER_CD;
|
|
mcor1 |= MCOR1_CDZD;
|
|
mcor2 |= MCOR2_CDOD;
|
|
}
|
|
|
|
if (C_CREAD(tty))
|
|
/* Enable receiver */
|
|
port->IER |= IER_RXD;
|
|
|
|
/* Set input FIFO size (1-8 bytes) */
|
|
cor3 |= RISCOM_RXFIFO;
|
|
/* Setting up CD180 channel registers */
|
|
rc_out(bp, CD180_COR1, cor1);
|
|
rc_out(bp, CD180_COR2, port->COR2);
|
|
rc_out(bp, CD180_COR3, cor3);
|
|
/* Make CD180 know about registers change */
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
|
|
/* Setting up modem option registers */
|
|
rc_out(bp, CD180_MCOR1, mcor1);
|
|
rc_out(bp, CD180_MCOR2, mcor2);
|
|
/* Enable CD180 transmitter & receiver */
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
|
|
/* Enable interrupts */
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
/* And finally set RTS on */
|
|
rc_out(bp, CD180_MSVR, port->MSVR);
|
|
}
|
|
|
|
/* Must be called with interrupts enabled */
|
|
static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (port->flags & ASYNC_INITIALIZED)
|
|
return 0;
|
|
|
|
if (!port->xmit_buf) {
|
|
/* We may sleep in get_zeroed_page() */
|
|
unsigned long tmp;
|
|
|
|
if (!(tmp = get_zeroed_page(GFP_KERNEL)))
|
|
return -ENOMEM;
|
|
|
|
if (port->xmit_buf) {
|
|
free_page(tmp);
|
|
return -ERESTARTSYS;
|
|
}
|
|
port->xmit_buf = (unsigned char *) tmp;
|
|
}
|
|
|
|
save_flags(flags); cli();
|
|
|
|
if (port->tty)
|
|
clear_bit(TTY_IO_ERROR, &port->tty->flags);
|
|
|
|
if (port->count == 1)
|
|
bp->count++;
|
|
|
|
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
|
|
rc_change_speed(bp, port);
|
|
port->flags |= ASYNC_INITIALIZED;
|
|
|
|
restore_flags(flags);
|
|
return 0;
|
|
}
|
|
|
|
/* Must be called with interrupts disabled */
|
|
static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
|
|
{
|
|
struct tty_struct *tty;
|
|
|
|
if (!(port->flags & ASYNC_INITIALIZED))
|
|
return;
|
|
|
|
#ifdef RC_REPORT_OVERRUN
|
|
printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
|
|
board_No(bp), port_No(port), port->overrun);
|
|
#endif
|
|
#ifdef RC_REPORT_FIFO
|
|
{
|
|
int i;
|
|
|
|
printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
|
|
board_No(bp), port_No(port));
|
|
for (i = 0; i < 10; i++) {
|
|
printk("%ld ", port->hits[i]);
|
|
}
|
|
printk("].\n");
|
|
}
|
|
#endif
|
|
if (port->xmit_buf) {
|
|
free_page((unsigned long) port->xmit_buf);
|
|
port->xmit_buf = NULL;
|
|
}
|
|
|
|
if (!(tty = port->tty) || C_HUPCL(tty)) {
|
|
/* Drop DTR */
|
|
bp->DTR |= (1u << port_No(port));
|
|
rc_out(bp, RC_DTR, bp->DTR);
|
|
}
|
|
|
|
/* Select port */
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
/* Reset port */
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_SOFTRESET);
|
|
/* Disable all interrupts from this port */
|
|
port->IER = 0;
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
|
|
if (tty)
|
|
set_bit(TTY_IO_ERROR, &tty->flags);
|
|
port->flags &= ~ASYNC_INITIALIZED;
|
|
|
|
if (--bp->count < 0) {
|
|
printk(KERN_INFO "rc%d: rc_shutdown_port: "
|
|
"bad board count: %d\n",
|
|
board_No(bp), bp->count);
|
|
bp->count = 0;
|
|
}
|
|
|
|
/*
|
|
* If this is the last opened port on the board
|
|
* shutdown whole board
|
|
*/
|
|
if (!bp->count)
|
|
rc_shutdown_board(bp);
|
|
}
|
|
|
|
|
|
static int block_til_ready(struct tty_struct *tty, struct file * filp,
|
|
struct riscom_port *port)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
struct riscom_board *bp = port_Board(port);
|
|
int retval;
|
|
int do_clocal = 0;
|
|
int CD;
|
|
|
|
/*
|
|
* If the device is in the middle of being closed, then block
|
|
* until it's done, and then try again.
|
|
*/
|
|
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
|
|
interruptible_sleep_on(&port->close_wait);
|
|
if (port->flags & ASYNC_HUP_NOTIFY)
|
|
return -EAGAIN;
|
|
else
|
|
return -ERESTARTSYS;
|
|
}
|
|
|
|
/*
|
|
* If non-blocking mode is set, or the port is not enabled,
|
|
* then make the check up front and then exit.
|
|
*/
|
|
if ((filp->f_flags & O_NONBLOCK) ||
|
|
(tty->flags & (1 << TTY_IO_ERROR))) {
|
|
port->flags |= ASYNC_NORMAL_ACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
if (C_CLOCAL(tty))
|
|
do_clocal = 1;
|
|
|
|
/*
|
|
* Block waiting for the carrier detect and the line to become
|
|
* free (i.e., not in use by the callout). While we are in
|
|
* this loop, info->count is dropped by one, so that
|
|
* rs_close() knows when to free things. We restore it upon
|
|
* exit, either normal or abnormal.
|
|
*/
|
|
retval = 0;
|
|
add_wait_queue(&port->open_wait, &wait);
|
|
cli();
|
|
if (!tty_hung_up_p(filp))
|
|
port->count--;
|
|
sti();
|
|
port->blocked_open++;
|
|
while (1) {
|
|
cli();
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
|
|
rc_out(bp, CD180_MSVR, MSVR_RTS);
|
|
bp->DTR &= ~(1u << port_No(port));
|
|
rc_out(bp, RC_DTR, bp->DTR);
|
|
sti();
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
if (tty_hung_up_p(filp) ||
|
|
!(port->flags & ASYNC_INITIALIZED)) {
|
|
if (port->flags & ASYNC_HUP_NOTIFY)
|
|
retval = -EAGAIN;
|
|
else
|
|
retval = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
if (!(port->flags & ASYNC_CLOSING) &&
|
|
(do_clocal || CD))
|
|
break;
|
|
if (signal_pending(current)) {
|
|
retval = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
schedule();
|
|
}
|
|
current->state = TASK_RUNNING;
|
|
remove_wait_queue(&port->open_wait, &wait);
|
|
if (!tty_hung_up_p(filp))
|
|
port->count++;
|
|
port->blocked_open--;
|
|
if (retval)
|
|
return retval;
|
|
|
|
port->flags |= ASYNC_NORMAL_ACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
static int rc_open(struct tty_struct * tty, struct file * filp)
|
|
{
|
|
int board;
|
|
int error;
|
|
struct riscom_port * port;
|
|
struct riscom_board * bp;
|
|
|
|
board = RC_BOARD(tty->index);
|
|
if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
|
|
return -ENODEV;
|
|
|
|
bp = &rc_board[board];
|
|
port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
|
|
if (rc_paranoia_check(port, tty->name, "rc_open"))
|
|
return -ENODEV;
|
|
|
|
if ((error = rc_setup_board(bp)))
|
|
return error;
|
|
|
|
port->count++;
|
|
tty->driver_data = port;
|
|
port->tty = tty;
|
|
|
|
if ((error = rc_setup_port(bp, port)))
|
|
return error;
|
|
|
|
if ((error = block_til_ready(tty, filp, port)))
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rc_close(struct tty_struct * tty, struct file * filp)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *) tty->driver_data;
|
|
struct riscom_board *bp;
|
|
unsigned long flags;
|
|
unsigned long timeout;
|
|
|
|
if (!port || rc_paranoia_check(port, tty->name, "close"))
|
|
return;
|
|
|
|
save_flags(flags); cli();
|
|
if (tty_hung_up_p(filp))
|
|
goto out;
|
|
|
|
bp = port_Board(port);
|
|
if ((tty->count == 1) && (port->count != 1)) {
|
|
printk(KERN_INFO "rc%d: rc_close: bad port count;"
|
|
" tty->count is 1, port count is %d\n",
|
|
board_No(bp), port->count);
|
|
port->count = 1;
|
|
}
|
|
if (--port->count < 0) {
|
|
printk(KERN_INFO "rc%d: rc_close: bad port count "
|
|
"for tty%d: %d\n",
|
|
board_No(bp), port_No(port), port->count);
|
|
port->count = 0;
|
|
}
|
|
if (port->count)
|
|
goto out;
|
|
port->flags |= ASYNC_CLOSING;
|
|
/*
|
|
* Now we wait for the transmit buffer to clear; and we notify
|
|
* the line discipline to only process XON/XOFF characters.
|
|
*/
|
|
tty->closing = 1;
|
|
if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
|
|
tty_wait_until_sent(tty, port->closing_wait);
|
|
/*
|
|
* At this point we stop accepting input. To do this, we
|
|
* disable the receive line status interrupts, and tell the
|
|
* interrupt driver to stop checking the data ready bit in the
|
|
* line status register.
|
|
*/
|
|
port->IER &= ~IER_RXD;
|
|
if (port->flags & ASYNC_INITIALIZED) {
|
|
port->IER &= ~IER_TXRDY;
|
|
port->IER |= IER_TXEMPTY;
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
/*
|
|
* Before we drop DTR, make sure the UART transmitter
|
|
* has completely drained; this is especially
|
|
* important if there is a transmit FIFO!
|
|
*/
|
|
timeout = jiffies+HZ;
|
|
while(port->IER & IER_TXEMPTY) {
|
|
msleep_interruptible(jiffies_to_msecs(port->timeout));
|
|
if (time_after(jiffies, timeout))
|
|
break;
|
|
}
|
|
}
|
|
rc_shutdown_port(bp, port);
|
|
if (tty->driver->flush_buffer)
|
|
tty->driver->flush_buffer(tty);
|
|
tty_ldisc_flush(tty);
|
|
|
|
tty->closing = 0;
|
|
port->event = 0;
|
|
port->tty = NULL;
|
|
if (port->blocked_open) {
|
|
if (port->close_delay) {
|
|
msleep_interruptible(jiffies_to_msecs(port->close_delay));
|
|
}
|
|
wake_up_interruptible(&port->open_wait);
|
|
}
|
|
port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
|
|
wake_up_interruptible(&port->close_wait);
|
|
out: restore_flags(flags);
|
|
}
|
|
|
|
static int rc_write(struct tty_struct * tty,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
struct riscom_board *bp;
|
|
int c, total = 0;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_write"))
|
|
return 0;
|
|
|
|
bp = port_Board(port);
|
|
|
|
if (!tty || !port->xmit_buf || !tmp_buf)
|
|
return 0;
|
|
|
|
save_flags(flags);
|
|
while (1) {
|
|
cli();
|
|
c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
|
|
SERIAL_XMIT_SIZE - port->xmit_head));
|
|
if (c <= 0) {
|
|
restore_flags(flags);
|
|
break;
|
|
}
|
|
|
|
memcpy(port->xmit_buf + port->xmit_head, buf, c);
|
|
port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
|
|
port->xmit_cnt += c;
|
|
restore_flags(flags);
|
|
|
|
buf += c;
|
|
count -= c;
|
|
total += c;
|
|
}
|
|
|
|
cli();
|
|
if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
|
|
!(port->IER & IER_TXRDY)) {
|
|
port->IER |= IER_TXRDY;
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
}
|
|
restore_flags(flags);
|
|
|
|
return total;
|
|
}
|
|
|
|
static void rc_put_char(struct tty_struct * tty, unsigned char ch)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_put_char"))
|
|
return;
|
|
|
|
if (!tty || !port->xmit_buf)
|
|
return;
|
|
|
|
save_flags(flags); cli();
|
|
|
|
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
|
|
goto out;
|
|
|
|
port->xmit_buf[port->xmit_head++] = ch;
|
|
port->xmit_head &= SERIAL_XMIT_SIZE - 1;
|
|
port->xmit_cnt++;
|
|
out: restore_flags(flags);
|
|
}
|
|
|
|
static void rc_flush_chars(struct tty_struct * tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
|
|
return;
|
|
|
|
if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
|
|
!port->xmit_buf)
|
|
return;
|
|
|
|
save_flags(flags); cli();
|
|
port->IER |= IER_TXRDY;
|
|
rc_out(port_Board(port), CD180_CAR, port_No(port));
|
|
rc_out(port_Board(port), CD180_IER, port->IER);
|
|
restore_flags(flags);
|
|
}
|
|
|
|
static int rc_write_room(struct tty_struct * tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
int ret;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_write_room"))
|
|
return 0;
|
|
|
|
ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
|
|
if (ret < 0)
|
|
ret = 0;
|
|
return ret;
|
|
}
|
|
|
|
static int rc_chars_in_buffer(struct tty_struct *tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
|
|
return 0;
|
|
|
|
return port->xmit_cnt;
|
|
}
|
|
|
|
static void rc_flush_buffer(struct tty_struct *tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
|
|
return;
|
|
|
|
save_flags(flags); cli();
|
|
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
|
|
restore_flags(flags);
|
|
|
|
wake_up_interruptible(&tty->write_wait);
|
|
tty_wakeup(tty);
|
|
}
|
|
|
|
static int rc_tiocmget(struct tty_struct *tty, struct file *file)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
struct riscom_board * bp;
|
|
unsigned char status;
|
|
unsigned int result;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, __FUNCTION__))
|
|
return -ENODEV;
|
|
|
|
bp = port_Board(port);
|
|
save_flags(flags); cli();
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
status = rc_in(bp, CD180_MSVR);
|
|
result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
|
|
restore_flags(flags);
|
|
result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
|
|
| ((status & MSVR_DTR) ? TIOCM_DTR : 0)
|
|
| ((status & MSVR_CD) ? TIOCM_CAR : 0)
|
|
| ((status & MSVR_DSR) ? TIOCM_DSR : 0)
|
|
| ((status & MSVR_CTS) ? TIOCM_CTS : 0);
|
|
return result;
|
|
}
|
|
|
|
static int rc_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
unsigned long flags;
|
|
struct riscom_board *bp;
|
|
|
|
if (rc_paranoia_check(port, tty->name, __FUNCTION__))
|
|
return -ENODEV;
|
|
|
|
bp = port_Board(port);
|
|
|
|
save_flags(flags); cli();
|
|
if (set & TIOCM_RTS)
|
|
port->MSVR |= MSVR_RTS;
|
|
if (set & TIOCM_DTR)
|
|
bp->DTR &= ~(1u << port_No(port));
|
|
|
|
if (clear & TIOCM_RTS)
|
|
port->MSVR &= ~MSVR_RTS;
|
|
if (clear & TIOCM_DTR)
|
|
bp->DTR |= (1u << port_No(port));
|
|
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
rc_out(bp, CD180_MSVR, port->MSVR);
|
|
rc_out(bp, RC_DTR, bp->DTR);
|
|
restore_flags(flags);
|
|
return 0;
|
|
}
|
|
|
|
static inline void rc_send_break(struct riscom_port * port, unsigned long length)
|
|
{
|
|
struct riscom_board *bp = port_Board(port);
|
|
unsigned long flags;
|
|
|
|
save_flags(flags); cli();
|
|
port->break_length = RISCOM_TPS / HZ * length;
|
|
port->COR2 |= COR2_ETC;
|
|
port->IER |= IER_TXRDY;
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
rc_out(bp, CD180_COR2, port->COR2);
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_CORCHG2);
|
|
rc_wait_CCR(bp);
|
|
restore_flags(flags);
|
|
}
|
|
|
|
static inline int rc_set_serial_info(struct riscom_port * port,
|
|
struct serial_struct __user * newinfo)
|
|
{
|
|
struct serial_struct tmp;
|
|
struct riscom_board *bp = port_Board(port);
|
|
int change_speed;
|
|
unsigned long flags;
|
|
|
|
if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
|
|
return -EFAULT;
|
|
|
|
#if 0
|
|
if ((tmp.irq != bp->irq) ||
|
|
(tmp.port != bp->base) ||
|
|
(tmp.type != PORT_CIRRUS) ||
|
|
(tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
|
|
(tmp.custom_divisor != 0) ||
|
|
(tmp.xmit_fifo_size != CD180_NFIFO) ||
|
|
(tmp.flags & ~RISCOM_LEGAL_FLAGS))
|
|
return -EINVAL;
|
|
#endif
|
|
|
|
change_speed = ((port->flags & ASYNC_SPD_MASK) !=
|
|
(tmp.flags & ASYNC_SPD_MASK));
|
|
|
|
if (!capable(CAP_SYS_ADMIN)) {
|
|
if ((tmp.close_delay != port->close_delay) ||
|
|
(tmp.closing_wait != port->closing_wait) ||
|
|
((tmp.flags & ~ASYNC_USR_MASK) !=
|
|
(port->flags & ~ASYNC_USR_MASK)))
|
|
return -EPERM;
|
|
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
|
|
(tmp.flags & ASYNC_USR_MASK));
|
|
} else {
|
|
port->flags = ((port->flags & ~ASYNC_FLAGS) |
|
|
(tmp.flags & ASYNC_FLAGS));
|
|
port->close_delay = tmp.close_delay;
|
|
port->closing_wait = tmp.closing_wait;
|
|
}
|
|
if (change_speed) {
|
|
save_flags(flags); cli();
|
|
rc_change_speed(bp, port);
|
|
restore_flags(flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline int rc_get_serial_info(struct riscom_port * port,
|
|
struct serial_struct __user *retinfo)
|
|
{
|
|
struct serial_struct tmp;
|
|
struct riscom_board *bp = port_Board(port);
|
|
|
|
memset(&tmp, 0, sizeof(tmp));
|
|
tmp.type = PORT_CIRRUS;
|
|
tmp.line = port - rc_port;
|
|
tmp.port = bp->base;
|
|
tmp.irq = bp->irq;
|
|
tmp.flags = port->flags;
|
|
tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
|
|
tmp.close_delay = port->close_delay * HZ/100;
|
|
tmp.closing_wait = port->closing_wait * HZ/100;
|
|
tmp.xmit_fifo_size = CD180_NFIFO;
|
|
return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
|
|
}
|
|
|
|
static int rc_ioctl(struct tty_struct * tty, struct file * filp,
|
|
unsigned int cmd, unsigned long arg)
|
|
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
void __user *argp = (void __user *)arg;
|
|
int retval;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
|
|
return -ENODEV;
|
|
|
|
switch (cmd) {
|
|
case TCSBRK: /* SVID version: non-zero arg --> no break */
|
|
retval = tty_check_change(tty);
|
|
if (retval)
|
|
return retval;
|
|
tty_wait_until_sent(tty, 0);
|
|
if (!arg)
|
|
rc_send_break(port, HZ/4); /* 1/4 second */
|
|
break;
|
|
case TCSBRKP: /* support for POSIX tcsendbreak() */
|
|
retval = tty_check_change(tty);
|
|
if (retval)
|
|
return retval;
|
|
tty_wait_until_sent(tty, 0);
|
|
rc_send_break(port, arg ? arg*(HZ/10) : HZ/4);
|
|
break;
|
|
case TIOCGSOFTCAR:
|
|
return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned __user *)argp);
|
|
case TIOCSSOFTCAR:
|
|
if (get_user(arg,(unsigned __user *) argp))
|
|
return -EFAULT;
|
|
tty->termios->c_cflag =
|
|
((tty->termios->c_cflag & ~CLOCAL) |
|
|
(arg ? CLOCAL : 0));
|
|
break;
|
|
case TIOCGSERIAL:
|
|
return rc_get_serial_info(port, argp);
|
|
case TIOCSSERIAL:
|
|
return rc_set_serial_info(port, argp);
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void rc_throttle(struct tty_struct * tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
struct riscom_board *bp;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_throttle"))
|
|
return;
|
|
|
|
bp = port_Board(port);
|
|
|
|
save_flags(flags); cli();
|
|
port->MSVR &= ~MSVR_RTS;
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
if (I_IXOFF(tty)) {
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_SSCH2);
|
|
rc_wait_CCR(bp);
|
|
}
|
|
rc_out(bp, CD180_MSVR, port->MSVR);
|
|
restore_flags(flags);
|
|
}
|
|
|
|
static void rc_unthrottle(struct tty_struct * tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
struct riscom_board *bp;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
|
|
return;
|
|
|
|
bp = port_Board(port);
|
|
|
|
save_flags(flags); cli();
|
|
port->MSVR |= MSVR_RTS;
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
if (I_IXOFF(tty)) {
|
|
rc_wait_CCR(bp);
|
|
rc_out(bp, CD180_CCR, CCR_SSCH1);
|
|
rc_wait_CCR(bp);
|
|
}
|
|
rc_out(bp, CD180_MSVR, port->MSVR);
|
|
restore_flags(flags);
|
|
}
|
|
|
|
static void rc_stop(struct tty_struct * tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
struct riscom_board *bp;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_stop"))
|
|
return;
|
|
|
|
bp = port_Board(port);
|
|
|
|
save_flags(flags); cli();
|
|
port->IER &= ~IER_TXRDY;
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
restore_flags(flags);
|
|
}
|
|
|
|
static void rc_start(struct tty_struct * tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
struct riscom_board *bp;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_start"))
|
|
return;
|
|
|
|
bp = port_Board(port);
|
|
|
|
save_flags(flags); cli();
|
|
if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
|
|
port->IER |= IER_TXRDY;
|
|
rc_out(bp, CD180_CAR, port_No(port));
|
|
rc_out(bp, CD180_IER, port->IER);
|
|
}
|
|
restore_flags(flags);
|
|
}
|
|
|
|
/*
|
|
* This routine is called from the work queue when the interrupt
|
|
* routine has signalled that a hangup has occurred. The path of
|
|
* hangup processing is:
|
|
*
|
|
* serial interrupt routine -> (workqueue) ->
|
|
* do_rc_hangup() -> tty->hangup() -> rc_hangup()
|
|
*
|
|
*/
|
|
static void do_rc_hangup(void *private_)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *) private_;
|
|
struct tty_struct *tty;
|
|
|
|
tty = port->tty;
|
|
if (tty)
|
|
tty_hangup(tty); /* FIXME: module removal race still here */
|
|
}
|
|
|
|
static void rc_hangup(struct tty_struct * tty)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
struct riscom_board *bp;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_hangup"))
|
|
return;
|
|
|
|
bp = port_Board(port);
|
|
|
|
rc_shutdown_port(bp, port);
|
|
port->event = 0;
|
|
port->count = 0;
|
|
port->flags &= ~ASYNC_NORMAL_ACTIVE;
|
|
port->tty = NULL;
|
|
wake_up_interruptible(&port->open_wait);
|
|
}
|
|
|
|
static void rc_set_termios(struct tty_struct * tty, struct termios * old_termios)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
|
|
return;
|
|
|
|
if (tty->termios->c_cflag == old_termios->c_cflag &&
|
|
tty->termios->c_iflag == old_termios->c_iflag)
|
|
return;
|
|
|
|
save_flags(flags); cli();
|
|
rc_change_speed(port_Board(port), port);
|
|
restore_flags(flags);
|
|
|
|
if ((old_termios->c_cflag & CRTSCTS) &&
|
|
!(tty->termios->c_cflag & CRTSCTS)) {
|
|
tty->hw_stopped = 0;
|
|
rc_start(tty);
|
|
}
|
|
}
|
|
|
|
static void do_softint(void *private_)
|
|
{
|
|
struct riscom_port *port = (struct riscom_port *) private_;
|
|
struct tty_struct *tty;
|
|
|
|
if(!(tty = port->tty))
|
|
return;
|
|
|
|
if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) {
|
|
tty_wakeup(tty);
|
|
wake_up_interruptible(&tty->write_wait);
|
|
}
|
|
}
|
|
|
|
static struct tty_operations riscom_ops = {
|
|
.open = rc_open,
|
|
.close = rc_close,
|
|
.write = rc_write,
|
|
.put_char = rc_put_char,
|
|
.flush_chars = rc_flush_chars,
|
|
.write_room = rc_write_room,
|
|
.chars_in_buffer = rc_chars_in_buffer,
|
|
.flush_buffer = rc_flush_buffer,
|
|
.ioctl = rc_ioctl,
|
|
.throttle = rc_throttle,
|
|
.unthrottle = rc_unthrottle,
|
|
.set_termios = rc_set_termios,
|
|
.stop = rc_stop,
|
|
.start = rc_start,
|
|
.hangup = rc_hangup,
|
|
.tiocmget = rc_tiocmget,
|
|
.tiocmset = rc_tiocmset,
|
|
};
|
|
|
|
static inline int rc_init_drivers(void)
|
|
{
|
|
int error;
|
|
int i;
|
|
|
|
riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
|
|
if (!riscom_driver)
|
|
return -ENOMEM;
|
|
|
|
if (!(tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL))) {
|
|
printk(KERN_ERR "rc: Couldn't get free page.\n");
|
|
put_tty_driver(riscom_driver);
|
|
return 1;
|
|
}
|
|
memset(IRQ_to_board, 0, sizeof(IRQ_to_board));
|
|
riscom_driver->owner = THIS_MODULE;
|
|
riscom_driver->name = "ttyL";
|
|
riscom_driver->devfs_name = "tts/L";
|
|
riscom_driver->major = RISCOM8_NORMAL_MAJOR;
|
|
riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
|
riscom_driver->subtype = SERIAL_TYPE_NORMAL;
|
|
riscom_driver->init_termios = tty_std_termios;
|
|
riscom_driver->init_termios.c_cflag =
|
|
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
|
|
riscom_driver->flags = TTY_DRIVER_REAL_RAW;
|
|
tty_set_operations(riscom_driver, &riscom_ops);
|
|
if ((error = tty_register_driver(riscom_driver))) {
|
|
free_page((unsigned long)tmp_buf);
|
|
put_tty_driver(riscom_driver);
|
|
printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
|
|
"error = %d\n",
|
|
error);
|
|
return 1;
|
|
}
|
|
|
|
memset(rc_port, 0, sizeof(rc_port));
|
|
for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
|
|
rc_port[i].magic = RISCOM8_MAGIC;
|
|
INIT_WORK(&rc_port[i].tqueue, do_softint, &rc_port[i]);
|
|
INIT_WORK(&rc_port[i].tqueue_hangup, do_rc_hangup, &rc_port[i]);
|
|
rc_port[i].close_delay = 50 * HZ/100;
|
|
rc_port[i].closing_wait = 3000 * HZ/100;
|
|
init_waitqueue_head(&rc_port[i].open_wait);
|
|
init_waitqueue_head(&rc_port[i].close_wait);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rc_release_drivers(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
save_flags(flags);
|
|
cli();
|
|
free_page((unsigned long)tmp_buf);
|
|
tty_unregister_driver(riscom_driver);
|
|
put_tty_driver(riscom_driver);
|
|
restore_flags(flags);
|
|
}
|
|
|
|
#ifndef MODULE
|
|
/*
|
|
* Called at boot time.
|
|
*
|
|
* You can specify IO base for up to RC_NBOARD cards,
|
|
* using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
|
|
* Note that there will be no probing at default
|
|
* addresses in this case.
|
|
*
|
|
*/
|
|
static int __init riscom8_setup(char *str)
|
|
{
|
|
int ints[RC_NBOARD];
|
|
int i;
|
|
|
|
str = get_options(str, ARRAY_SIZE(ints), ints);
|
|
|
|
for (i = 0; i < RC_NBOARD; i++) {
|
|
if (i < ints[0])
|
|
rc_board[i].base = ints[i+1];
|
|
else
|
|
rc_board[i].base = 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("riscom8=", riscom8_setup);
|
|
#endif
|
|
|
|
static char banner[] __initdata =
|
|
KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
|
|
"1994-1996.\n";
|
|
static char no_boards_msg[] __initdata =
|
|
KERN_INFO "rc: No RISCom/8 boards detected.\n";
|
|
|
|
/*
|
|
* This routine must be called by kernel at boot time
|
|
*/
|
|
static int __init riscom8_init(void)
|
|
{
|
|
int i;
|
|
int found = 0;
|
|
|
|
printk(banner);
|
|
|
|
if (rc_init_drivers())
|
|
return -EIO;
|
|
|
|
for (i = 0; i < RC_NBOARD; i++)
|
|
if (rc_board[i].base && !rc_probe(&rc_board[i]))
|
|
found++;
|
|
|
|
if (!found) {
|
|
rc_release_drivers();
|
|
printk(no_boards_msg);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef MODULE
|
|
static int iobase;
|
|
static int iobase1;
|
|
static int iobase2;
|
|
static int iobase3;
|
|
MODULE_PARM(iobase, "i");
|
|
MODULE_PARM(iobase1, "i");
|
|
MODULE_PARM(iobase2, "i");
|
|
MODULE_PARM(iobase3, "i");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
#endif /* MODULE */
|
|
|
|
/*
|
|
* You can setup up to 4 boards (current value of RC_NBOARD)
|
|
* by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
|
|
*
|
|
*/
|
|
static int __init riscom8_init_module (void)
|
|
{
|
|
#ifdef MODULE
|
|
int i;
|
|
|
|
if (iobase || iobase1 || iobase2 || iobase3) {
|
|
for(i = 0; i < RC_NBOARD; i++)
|
|
rc_board[0].base = 0;
|
|
}
|
|
|
|
if (iobase)
|
|
rc_board[0].base = iobase;
|
|
if (iobase1)
|
|
rc_board[1].base = iobase1;
|
|
if (iobase2)
|
|
rc_board[2].base = iobase2;
|
|
if (iobase3)
|
|
rc_board[3].base = iobase3;
|
|
#endif /* MODULE */
|
|
|
|
return riscom8_init();
|
|
}
|
|
|
|
static void __exit riscom8_exit_module (void)
|
|
{
|
|
int i;
|
|
|
|
rc_release_drivers();
|
|
for (i = 0; i < RC_NBOARD; i++)
|
|
if (rc_board[i].flags & RC_BOARD_PRESENT)
|
|
rc_release_io_range(&rc_board[i]);
|
|
|
|
}
|
|
|
|
module_init(riscom8_init_module);
|
|
module_exit(riscom8_exit_module);
|
|
|