Mika Westerberg 6c55d9b983 serial: 8250_pci: Add Intel Broadwell ports ... Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2016-01-29 08:15:33 -08:00
..
8250	serial: 8250_pci: Add Intel Broadwell ports	2016-01-29 08:15:33 -08:00
cpm_uart	tty: serial: cpm_uart: Fix module autoload for OF platform driver	2015-10-04 19:09:21 +01:00
jsm	serial/jsm: Deinline neo_parse_isr, save 688 bytes	2015-12-13 19:59:48 -08:00
21285.c
68328serial.c	drivers: tty: 68328serial.c: Remove parentheses after return	2015-12-13 19:59:48 -08:00
altera_jtaguart.c	drivers/tty/serial: altera: fix typos in #endif comments	2015-05-06 22:26:58 +02:00
altera_uart.c	serial: altera_uart: Use of_property_read_u32 instead of open-coding it	2015-10-04 17:47:49 +01:00
amba-pl010.c
amba-pl011.c	tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/O	2016-01-06 21:02:45 -08:00
amba-pl011.h	tty: amba-pl011: clean up LCR register offsets	2015-12-13 19:59:48 -08:00
apbuart.c	tty: serial: apbuart: Fix module autoload for OF platform driver	2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c	serial: ar933x_uart: Fix off-by-one for checking valid alias id	2015-03-07 03:20:25 +01:00
arc_uart.c
atmel_serial.c	drivers/tty/serial: delete unused MODULE_DEVICE_TABLE from atmel_serial.c	2016-01-08 21:12:19 -08:00
bcm63xx_uart.c	serial/bcm63xx_uart: Deinline wait_for_xmitr, save 374 bytes	2015-12-13 19:59:48 -08:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c	serial:bfin-uart:Remove 'struct timeval'	2015-12-13 19:59:48 -08:00
clps711x.c	serial: mctrl-gpio: rename init function	2015-10-04 18:46:43 +01:00
crisv10.c	tty: Remove tty_port::close_wait	2015-10-17 21:11:29 -07:00
crisv10.h
digicolor-usart.c	tty/serial: digicolor: remove sysrq reference	2015-02-02 10:11:25 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c	Merge 4.4-rc6 into tty-next	2015-12-21 11:06:07 -08:00
efm32-uart.c
etraxfs-uart.c	serial: etraxfs-uart: Fix crash	2015-11-20 16:19:54 -08:00
fsl_lpuart.c	serial: fsl_lpuart: add earlycon support	2015-10-17 21:18:30 -07:00
icom.c	tty: Remove unused SERIAL_DO_RESTART define	2015-12-13 19:59:48 -08:00
icom.h
ifx6x60.c	spi: Drop owner assignment from spi_drivers	2015-10-28 10:30:17 +09:00
ifx6x60.h
imx.c	serial: imx: implement handshaking using gpios with the mctrl_gpio helper	2015-12-13 20:01:47 -08:00
ioc3_serial.c	tty: ioc3_serial.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
ioc4_serial.c	tty: ioc4_serial.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig	ARM: SoC driver updates for v4.5	2016-01-20 18:42:30 -08:00
kgdb_nmi.c	serial: kgdb_nmi: Use bool function return values of true/false not 1/0	2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c	drivers/tty: make serial/lantic.c driver explicitly non-modular	2015-07-23 18:27:41 -07:00
lpc32xx_hs.c	tty: serial: lpc32xx_hs: fix handling platform_get_irq result	2015-10-04 19:09:21 +01:00
m32r_sio_reg.h
m32r_sio.c	serial/m32r_sio: Deinline wait_for_xmitr, save 165 bytes	2015-12-13 19:59:48 -08:00
m32r_sio.h
Makefile	serial: 8250: move of_serial code to 8250 directory	2015-12-13 19:59:48 -08:00
max310x.c	gpio: change member .dev to .parent	2015-11-19 09:24:35 +01:00
max3100.c	spi: Drop owner assignment from spi_drivers	2015-10-28 10:30:17 +09:00
mcf.c	drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE	2015-05-06 22:26:59 +02:00
men_z135_uart.c	serial/men_z135_uart: Deinline men_z135_reg_clr, save 176 bytes	2015-12-13 19:59:48 -08:00
meson_uart.c	ARM: meson: serial: check for tx-irq enabled in irq code	2015-12-13 19:59:48 -08:00
mpc52xx_uart.c	serial: mpc52xx: add delay after resetting transmitter to fix broken chars	2015-10-04 17:27:56 +01:00
mpsc.c	tty: disable unbind for old 74xx based serial/mpsc console port	2015-10-17 21:18:30 -07:00
msm_serial.c	tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation	2015-10-04 19:15:17 +01:00
msm_serial.h	tty: serial: msm: Add RX DMA support	2015-10-04 19:15:17 +01:00
mux.c	parisc: serial/mux: Convert to uart_console_device instead of open-coded	2015-10-22 15:44:28 +02:00
mxs-auart.c	serial: mctrl-gpio: rename init function	2015-10-04 18:46:43 +01:00
netx-serial.c
omap-serial.c	serial/omap-serial: Deinline wait_for_xmitr, save 165 bytes	2015-12-13 19:59:48 -08:00
pch_uart.c
pmac_zilog.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	serial/pxa: Deinline wait_for_xmitr, save 165 bytes	2015-12-13 19:59:48 -08:00
rp2.c
sa1100.c
samsung.c	serial: samsung: Fix UART status handling in DMA mode	2015-10-04 17:44:52 +01:00
samsung.h	serial: samsung: fix DMA mode enter condition for small FIFO sizes	2015-08-04 22:07:23 -07:00
sb1250-duart.c
sc16is7xx.c	GPIO bulk updates for the v4.5 kernel cycle:	2016-01-17 12:32:01 -08:00
sccnxp.c
serial_core.c	serial: support 16-bit register interface for console	2015-12-13 19:59:48 -08:00
serial_ks8695.c	tty/serial: kill off set_irq_flags usage	2015-06-09 12:26:32 -07:00
serial_mctrl_gpio.c	serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_init	2015-12-13 20:01:47 -08:00
serial_mctrl_gpio.h	serial: fix mctrl helper functions	2015-10-17 21:21:07 -07:00
serial_txx9.c
serial-tegra.c	serial: tegra: Add helper function for handling RX buffer	2015-10-17 21:07:57 -07:00
sh-sci.c	serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock	2016-01-07 21:08:05 -08:00
sh-sci.h	serial: sh-sci: Add BRG register definitions	2015-12-17 11:18:44 +01:00
sirfsoc_uart.c	serial: sirf: let uart's receive start in right place	2015-07-23 15:32:04 -07:00
sirfsoc_uart.h	serial: sirf: let uart's receive start in right place	2015-07-23 15:32:04 -07:00
sn_console.c	drivers/tty: make serial/sn_console.c driver explicitly non-modular	2015-07-23 18:27:41 -07:00
sprd_serial.c	serial/sprd_serial: Deinline wait_for_xmitr, save 165 bytes	2015-12-13 19:59:48 -08:00
st-asc.c	tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND	2015-10-04 19:11:05 +01:00
stm32-usart.c	tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND	2015-10-04 19:11:05 +01:00
suncore.c	drivers/tty: make serial/suncore.c driver explicitly non-modular	2015-07-23 18:27:41 -07:00
sunhv.c	tty/serial: Skip 'NULL' char after console break when sysrq enabled	2015-12-24 12:13:37 -05:00
sunsab.c
sunsab.h
sunsu.c	serial/sunsu: Deinline wait_for_xmitr, save 165 bytes	2015-12-13 19:59:48 -08:00
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c	serial: xilinx: Use platform_get_irq to get irq description structure	2015-04-28 14:26:21 +02:00
ucc_uart.c	QE: Move QE from arch/powerpc to drivers/soc	2015-12-22 17:12:56 -06:00
vr41xx_siu.c
vt8500_serial.c	serial/vt8500_serial: Deinline wait_for_xmitr, save 165 bytes	2015-12-13 19:59:48 -08:00
xilinx_uartps.c	serial: xuartps: add __init to earlycon write method	2015-05-10 19:10:08 +02:00
zs.c
zs.h