AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 14:38:02 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
96a2f92bf8
linux_dsm_epyc7002/arch/arc/plat-axs10x/axs10x.c
Ruud Derwig 2924cd18c4 ARCv2: [vdk] dts files and defconfig for HS38 VDK 
- CONFIG_ARC_UBOOT_SUPPORT to handle arguments passed in r0, r1, r2
 - CONFIG_DEVTMPFS_MOUNT for mouting rootfs since it uses external cpio
   for rootfs

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ruud Derwig <rderwig@synopsys.com>
[vgupta: folded the Main baord DT files for smp/up into one]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:21 +05:30

485 lines
13 KiB
C
Raw Blame History

/*
* AXS101/AXS103 Software Development Platform
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/of_platform.h>
#include <asm/asm-offsets.h>
#include <asm/clk.h>
#include <asm/io.h>
#include <asm/mach_desc.h>
#include <asm/mcip.h>
#define AXS_MB_CGU 0xE0010000
#define AXS_MB_CREG 0xE0011000
#define CREG_MB_IRQ_MUX (AXS_MB_CREG + 0x214)
#define CREG_MB_SW_RESET (AXS_MB_CREG + 0x220)
#define CREG_MB_VER (AXS_MB_CREG + 0x230)
#define CREG_MB_CONFIG (AXS_MB_CREG + 0x234)
#define AXC001_CREG 0xF0001000
#define AXC001_GPIO_INTC 0xF0003000
static void __init axs10x_enable_gpio_intc_wire(void)
{
/*
* Peripherals on CPU Card and Mother Board are wired to cpu intc via
* intermediate DW APB GPIO blocks (mainly for debouncing)
*
* ---------------------
* | snps,arc700-intc |
* ---------------------
* | #7 | #15
* ------------------- -------------------
* | snps,dw-apb-gpio | | snps,dw-apb-gpio |
* ------------------- -------------------
* | |
* | [ Debug UART on cpu card ]
* |
* ------------------------
* | snps,dw-apb-intc (MB)|
* ------------------------
* | | | |
* [eth] [uart] [... other perip on Main Board]
*
* Current implementation of "irq-dw-apb-ictl" driver doesn't work well
* with stacked INTCs. In particular problem happens if its master INTC
* not yet instantiated. See discussion here -
* https://lkml.org/lkml/2015/3/4/755
*
* So setup the first gpio block as a passive pass thru and hide it from
* DT hardware topology - connect MB intc directly to cpu intc
* The GPIO "wire" needs to be init nevertheless (here)
*
* One side adv is that peripheral interrupt handling avoids one nested
* intc ISR hop
*/
#define GPIO_INTEN (AXC001_GPIO_INTC + 0x30)
#define GPIO_INTMASK (AXC001_GPIO_INTC + 0x34)
#define GPIO_INTTYPE_LEVEL (AXC001_GPIO_INTC + 0x38)
#define GPIO_INT_POLARITY (AXC001_GPIO_INTC + 0x3c)
#define MB_TO_GPIO_IRQ 12
iowrite32(~(1 << MB_TO_GPIO_IRQ), (void __iomem *) GPIO_INTMASK);
iowrite32(0, (void __iomem *) GPIO_INTTYPE_LEVEL);
iowrite32(~0, (void __iomem *) GPIO_INT_POLARITY);
iowrite32(1 << MB_TO_GPIO_IRQ, (void __iomem *) GPIO_INTEN);
}
static inline void __init
write_cgu_reg(uint32_t value, void __iomem *reg, void __iomem *lock_reg)
{
unsigned int loops = 128 * 1024, ctr;
iowrite32(value, reg);
ctr = loops;
while (((ioread32(lock_reg) & 1) == 1) && ctr--) /* wait for unlock */
cpu_relax();
ctr = loops;
while (((ioread32(lock_reg) & 1) == 0) && ctr--) /* wait for re-lock */
cpu_relax();
}
static void __init axs10x_print_board_ver(unsigned int creg, const char *str)
{
union ver {
struct {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:11, y:12, m:4, d:5;
#else
unsigned int d:5, m:4, y:12, pad:11;
#endif
};
unsigned int val;
} board;
board.val = ioread32((void __iomem *)creg);
pr_info("AXS: %s FPGA Date: %u-%u-%u\n", str, board.d, board.m,
board.y);
}
static void __init axs10x_early_init(void)
{
int mb_rev;
char mb[32];
/* Determine motherboard version */
if (ioread32((void __iomem *) CREG_MB_CONFIG) & (1 << 28))
mb_rev = 3; /* HT-3 (rev3.0) */
else
mb_rev = 2; /* HT-2 (rev2.0) */
axs10x_enable_gpio_intc_wire();
scnprintf(mb, 32, "MainBoard v%d", mb_rev);
axs10x_print_board_ver(CREG_MB_VER, mb);
}
#ifdef CONFIG_AXS101
#define CREG_CPU_ADDR_770 (AXC001_CREG + 0x20)
#define CREG_CPU_ADDR_TUNN (AXC001_CREG + 0x60)
#define CREG_CPU_ADDR_770_UPD (AXC001_CREG + 0x34)
#define CREG_CPU_ADDR_TUNN_UPD (AXC001_CREG + 0x74)
#define CREG_CPU_ARC770_IRQ_MUX (AXC001_CREG + 0x114)
#define CREG_CPU_GPIO_UART_MUX (AXC001_CREG + 0x120)
/*
* Set up System Memory Map for ARC cpu / peripherals controllers
*
* Each AXI master has a 4GB memory map specified as 16 apertures of 256MB, each
* of which maps to a corresponding 256MB aperture in Target slave memory map.
*
* e.g. ARC cpu AXI Master's aperture 8 (0x8000_0000) is mapped to aperture 0
* (0x0000_0000) of DDR Port 0 (slave #1)
*
* Access from cpu to MB controllers such as GMAC is setup using AXI Tunnel:
* which has master/slaves on both ends.
* e.g. aperture 14 (0xE000_0000) of ARC cpu is mapped to aperture 14
* (0xE000_0000) of CPU Card AXI Tunnel slave (slave #3) which is mapped to
* MB AXI Tunnel Master, which also has a mem map setup
*
* In the reverse direction, MB AXI Masters (e.g. GMAC) mem map is setup
* to map to MB AXI Tunnel slave which connects to CPU Card AXI Tunnel Master
*/
struct aperture {
unsigned int slave_sel:4, slave_off:4, pad:24;
};
/* CPU Card target slaves */
#define AXC001_SLV_NONE 0
#define AXC001_SLV_DDR_PORT0 1
#define AXC001_SLV_SRAM 2
#define AXC001_SLV_AXI_TUNNEL 3
#define AXC001_SLV_AXI2APB 6
#define AXC001_SLV_DDR_PORT1 7
/* MB AXI Target slaves */
#define AXS_MB_SLV_NONE 0
#define AXS_MB_SLV_AXI_TUNNEL_CPU 1
#define AXS_MB_SLV_AXI_TUNNEL_HAPS 2
#define AXS_MB_SLV_SRAM 3
#define AXS_MB_SLV_CONTROL 4
/* MB AXI masters */
#define AXS_MB_MST_TUNNEL_CPU 0
#define AXS_MB_MST_USB_OHCI 10
/*
* memmap for ARC core on CPU Card
*/
static const struct aperture axc001_memmap[16] = {
{AXC001_SLV_AXI_TUNNEL, 0x0},
{AXC001_SLV_AXI_TUNNEL, 0x1},
{AXC001_SLV_SRAM, 0x0}, /* 0x2000_0000: Local SRAM */
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_DDR_PORT0, 0x0}, /* 0x8000_0000: DDR 0..256M */
{AXC001_SLV_DDR_PORT0, 0x1}, /* 0x9000_0000: DDR 256..512M */
{AXC001_SLV_DDR_PORT0, 0x2},
{AXC001_SLV_DDR_PORT0, 0x3},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_AXI_TUNNEL, 0xD},
{AXC001_SLV_AXI_TUNNEL, 0xE}, /* MB: CREG, CGU... */
{AXC001_SLV_AXI2APB, 0x0}, /* CPU Card local CREG, CGU... */
};
/*
* memmap for CPU Card AXI Tunnel Master (for access by MB controllers)
* GMAC (MB) -> MB AXI Tunnel slave -> CPU Card AXI Tunnel Master -> DDR
*/
static const struct aperture axc001_axi_tunnel_memmap[16] = {
{AXC001_SLV_AXI_TUNNEL, 0x0},
{AXC001_SLV_AXI_TUNNEL, 0x1},
{AXC001_SLV_SRAM, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_DDR_PORT1, 0x0},
{AXC001_SLV_DDR_PORT1, 0x1},
{AXC001_SLV_DDR_PORT1, 0x2},
{AXC001_SLV_DDR_PORT1, 0x3},
{AXC001_SLV_NONE, 0x0},
{AXC001_SLV_AXI_TUNNEL, 0xD},
{AXC001_SLV_AXI_TUNNEL, 0xE},
{AXC001_SLV_AXI2APB, 0x0},
};
/*
* memmap for MB AXI Masters
* Same mem map for all perip controllers as well as MB AXI Tunnel Master
*/
static const struct aperture axs_mb_memmap[16] = {
{AXS_MB_SLV_SRAM, 0x0},
{AXS_MB_SLV_SRAM, 0x0},
{AXS_MB_SLV_NONE, 0x0},
{AXS_MB_SLV_NONE, 0x0},
{AXS_MB_SLV_NONE, 0x0},
{AXS_MB_SLV_NONE, 0x0},
{AXS_MB_SLV_NONE, 0x0},
{AXS_MB_SLV_NONE, 0x0},
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0x8}, /* DDR on CPU Card */
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0x9}, /* DDR on CPU Card */
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0xA},
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0xB},
{AXS_MB_SLV_NONE, 0x0},
{AXS_MB_SLV_AXI_TUNNEL_HAPS, 0xD},
{AXS_MB_SLV_CONTROL, 0x0}, /* MB Local CREG, CGU... */
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0xF},
};
static noinline void __init
axs101_set_memmap(void __iomem *base, const struct aperture map[16])
{
unsigned int slave_select, slave_offset;
int i;
slave_select = slave_offset = 0;
for (i = 0; i < 8; i++) {
slave_select |= map[i].slave_sel << (i << 2);
slave_offset |= map[i].slave_off << (i << 2);
}
iowrite32(slave_select, base + 0x0); /* SLV0 */
iowrite32(slave_offset, base + 0x8); /* OFFSET0 */
slave_select = slave_offset = 0;
for (i = 0; i < 8; i++) {
slave_select |= map[i+8].slave_sel << (i << 2);
slave_offset |= map[i+8].slave_off << (i << 2);
}
iowrite32(slave_select, base + 0x4); /* SLV1 */
iowrite32(slave_offset, base + 0xC); /* OFFSET1 */
}
static void __init axs101_early_init(void)
{
int i;
/* ARC 770D memory view */
axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_770, axc001_memmap);
iowrite32(1, (void __iomem *) CREG_CPU_ADDR_770_UPD);
/* AXI tunnel memory map (incoming traffic from MB into CPU Card */
axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_TUNN,
axc001_axi_tunnel_memmap);
iowrite32(1, (void __iomem *) CREG_CPU_ADDR_TUNN_UPD);
/* MB peripherals memory map */
for (i = AXS_MB_MST_TUNNEL_CPU; i <= AXS_MB_MST_USB_OHCI; i++)
axs101_set_memmap((void __iomem *) AXS_MB_CREG + (i << 4),
axs_mb_memmap);
iowrite32(0x3ff, (void __iomem *) AXS_MB_CREG + 0x100); /* Update */
/* GPIO pins 18 and 19 are used as UART rx and tx, respectively. */
iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
/* Set up the MB interrupt system: mux interrupts to GPIO7) */
iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
/* reset ethernet and ULPI interfaces */
iowrite32(0x18, (void __iomem *) CREG_MB_SW_RESET);
/* map GPIO 14:10 to ARC 9:5 (IRQ mux change for MB v2 onwards) */
iowrite32(0x52, (void __iomem *) CREG_CPU_ARC770_IRQ_MUX);
axs10x_early_init();
}
#endif /* CONFIG_AXS101 */
#ifdef CONFIG_AXS103
#define AXC003_CGU 0xF0000000
#define AXC003_CREG 0xF0001000
#define AXC003_MST_AXI_TUNNEL 0
#define AXC003_MST_HS38 1
#define CREG_CPU_AXI_M0_IRQ_MUX (AXC003_CREG + 0x440)
#define CREG_CPU_GPIO_UART_MUX (AXC003_CREG + 0x480)
#define CREG_CPU_TUN_IO_CTRL (AXC003_CREG + 0x494)
union pll_reg {
struct {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:17, noupd:1, bypass:1, edge:1, high:6, low:6;
#else
unsigned int low:6, high:6, edge:1, bypass:1, noupd:1, pad:17;
#endif
};
unsigned int val;
};
static unsigned int __init axs103_get_freq(void)
{
union pll_reg idiv, fbdiv, odiv;
unsigned int f = 33333333;
idiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 0);
fbdiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 4);
odiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 8);
if (idiv.bypass != 1)
f = f / (idiv.low + idiv.high);
if (fbdiv.bypass != 1)
f = f * (fbdiv.low + fbdiv.high);
if (odiv.bypass != 1)
f = f / (odiv.low + odiv.high);
f = (f + 500000) / 1000000; /* Rounding */
return f;
}
static inline unsigned int __init encode_div(unsigned int id, int upd)
{
union pll_reg div;
div.val = 0;
div.noupd = !upd;
div.bypass = id == 1 ? 1 : 0;
div.edge = (id%2 == 0) ? 0 : 1; /* 0 = rising */
div.low = (id%2 == 0) ? id >> 1 : (id >> 1)+1;
div.high = id >> 1;
return div.val;
}
noinline static void __init
axs103_set_freq(unsigned int id, unsigned int fd, unsigned int od)
{
write_cgu_reg(encode_div(id, 0),
(void __iomem *)AXC003_CGU + 0x80 + 0,
(void __iomem *)AXC003_CGU + 0x110);
write_cgu_reg(encode_div(fd, 0),
(void __iomem *)AXC003_CGU + 0x80 + 4,
(void __iomem *)AXC003_CGU + 0x110);
write_cgu_reg(encode_div(od, 1),
(void __iomem *)AXC003_CGU + 0x80 + 8,
(void __iomem *)AXC003_CGU + 0x110);
}
static void __init axs103_early_init(void)
{
switch (arc_get_core_freq()/1000000) {
case 33:
axs103_set_freq(1, 1, 1);
break;
case 50:
axs103_set_freq(1, 30, 20);
break;
case 75:
axs103_set_freq(2, 45, 10);
break;
case 90:
axs103_set_freq(2, 54, 10);
break;
case 100:
axs103_set_freq(1, 30, 10);
break;
case 125:
axs103_set_freq(2, 45, 6);
break;
default:
/*
* In this case, core_frequency derived from
* DT "clock-frequency" might not match with board value.
* Hence update it to match the board value.
*/
arc_set_core_freq(axs103_get_freq() * 1000000);
break;
}
pr_info("Freq is %dMHz\n", axs103_get_freq());
/* Memory maps already config in pre-bootloader */
/* set GPIO mux to UART */
iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
iowrite32((0x00100000U | 0x000C0000U | 0x00003322U),
(void __iomem *) CREG_CPU_TUN_IO_CTRL);
/* Set up the AXS_MB interrupt system.*/
iowrite32(12, (void __iomem *) (CREG_CPU_AXI_M0_IRQ_MUX
+ (AXC003_MST_HS38 << 2)));
/* connect ICTL - Main Board with GPIO line */
iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
axs10x_print_board_ver(AXC003_CREG + 4088, "AXC003 CPU Card");
axs10x_early_init();
#ifdef CONFIG_ARC_MCIP
/* No Hardware init, but filling the smp ops callbacks */
mcip_init_early_smp();
#endif
}
#endif
#ifdef CONFIG_AXS101
static const char *axs101_compat[] __initconst = {
"snps,axs101",
NULL,
};
MACHINE_START(AXS101, "axs101")
.dt_compat = axs101_compat,
.init_early = axs101_early_init,
MACHINE_END
#endif /* CONFIG_AXS101 */
#ifdef CONFIG_AXS103
static const char *axs103_compat[] __initconst = {
"snps,axs103",
NULL,
};
MACHINE_START(AXS103, "axs103")
.dt_compat = axs103_compat,
.init_early = axs103_early_init,
#ifdef CONFIG_ARC_MCIP
.init_smp = mcip_init_smp,
#endif
MACHINE_END
/*
* For the VDK OS-kit, to get the offset to pid and command fields
*/
char coware_swa_pid_offset[TASK_PID];
char coware_swa_comm_offset[TASK_COMM];
#endif /* CONFIG_AXS103 */
Reference in New Issue View Git Blame Copy Permalink