mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 22:35:37 +07:00
082cc46838
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
1080 lines
27 KiB
C
1080 lines
27 KiB
C
/*
|
|
* driver/mfd/asic3.c
|
|
*
|
|
* Compaq ASIC3 support.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Copyright 2001 Compaq Computer Corporation.
|
|
* Copyright 2004-2005 Phil Blundell
|
|
* Copyright 2007-2008 OpenedHand Ltd.
|
|
*
|
|
* Authors: Phil Blundell <pb@handhelds.org>,
|
|
* Samuel Ortiz <sameo@openedhand.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/export.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/mfd/asic3.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/ds1wm.h>
|
|
#include <linux/mfd/tmio.h>
|
|
|
|
enum {
|
|
ASIC3_CLOCK_SPI,
|
|
ASIC3_CLOCK_OWM,
|
|
ASIC3_CLOCK_PWM0,
|
|
ASIC3_CLOCK_PWM1,
|
|
ASIC3_CLOCK_LED0,
|
|
ASIC3_CLOCK_LED1,
|
|
ASIC3_CLOCK_LED2,
|
|
ASIC3_CLOCK_SD_HOST,
|
|
ASIC3_CLOCK_SD_BUS,
|
|
ASIC3_CLOCK_SMBUS,
|
|
ASIC3_CLOCK_EX0,
|
|
ASIC3_CLOCK_EX1,
|
|
};
|
|
|
|
struct asic3_clk {
|
|
int enabled;
|
|
unsigned int cdex;
|
|
unsigned long rate;
|
|
};
|
|
|
|
#define INIT_CDEX(_name, _rate) \
|
|
[ASIC3_CLOCK_##_name] = { \
|
|
.cdex = CLOCK_CDEX_##_name, \
|
|
.rate = _rate, \
|
|
}
|
|
|
|
static struct asic3_clk asic3_clk_init[] __initdata = {
|
|
INIT_CDEX(SPI, 0),
|
|
INIT_CDEX(OWM, 5000000),
|
|
INIT_CDEX(PWM0, 0),
|
|
INIT_CDEX(PWM1, 0),
|
|
INIT_CDEX(LED0, 0),
|
|
INIT_CDEX(LED1, 0),
|
|
INIT_CDEX(LED2, 0),
|
|
INIT_CDEX(SD_HOST, 24576000),
|
|
INIT_CDEX(SD_BUS, 12288000),
|
|
INIT_CDEX(SMBUS, 0),
|
|
INIT_CDEX(EX0, 32768),
|
|
INIT_CDEX(EX1, 24576000),
|
|
};
|
|
|
|
struct asic3 {
|
|
void __iomem *mapping;
|
|
unsigned int bus_shift;
|
|
unsigned int irq_nr;
|
|
unsigned int irq_base;
|
|
spinlock_t lock;
|
|
u16 irq_bothedge[4];
|
|
struct gpio_chip gpio;
|
|
struct device *dev;
|
|
void __iomem *tmio_cnf;
|
|
|
|
struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
|
|
};
|
|
|
|
static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset);
|
|
|
|
void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 value)
|
|
{
|
|
iowrite16(value, asic->mapping +
|
|
(reg >> asic->bus_shift));
|
|
}
|
|
EXPORT_SYMBOL_GPL(asic3_write_register);
|
|
|
|
u32 asic3_read_register(struct asic3 *asic, unsigned int reg)
|
|
{
|
|
return ioread16(asic->mapping +
|
|
(reg >> asic->bus_shift));
|
|
}
|
|
EXPORT_SYMBOL_GPL(asic3_read_register);
|
|
|
|
static void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set)
|
|
{
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, reg);
|
|
if (set)
|
|
val |= bits;
|
|
else
|
|
val &= ~bits;
|
|
asic3_write_register(asic, reg, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
/* IRQs */
|
|
#define MAX_ASIC_ISR_LOOPS 20
|
|
#define ASIC3_GPIO_BASE_INCR \
|
|
(ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE)
|
|
|
|
static void asic3_irq_flip_edge(struct asic3 *asic,
|
|
u32 base, int bit)
|
|
{
|
|
u16 edge;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
edge = asic3_read_register(asic,
|
|
base + ASIC3_GPIO_EDGE_TRIGGER);
|
|
edge ^= bit;
|
|
asic3_write_register(asic,
|
|
base + ASIC3_GPIO_EDGE_TRIGGER, edge);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_irq_demux(struct irq_desc *desc)
|
|
{
|
|
struct asic3 *asic = irq_desc_get_handler_data(desc);
|
|
struct irq_data *data = irq_desc_get_irq_data(desc);
|
|
int iter, i;
|
|
unsigned long flags;
|
|
|
|
data->chip->irq_ack(data);
|
|
|
|
for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
|
|
u32 status;
|
|
int bank;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
status = asic3_read_register(asic,
|
|
ASIC3_OFFSET(INTR, P_INT_STAT));
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
/* Check all ten register bits */
|
|
if ((status & 0x3ff) == 0)
|
|
break;
|
|
|
|
/* Handle GPIO IRQs */
|
|
for (bank = 0; bank < ASIC3_NUM_GPIO_BANKS; bank++) {
|
|
if (status & (1 << bank)) {
|
|
unsigned long base, istat;
|
|
|
|
base = ASIC3_GPIO_A_BASE
|
|
+ bank * ASIC3_GPIO_BASE_INCR;
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
istat = asic3_read_register(asic,
|
|
base +
|
|
ASIC3_GPIO_INT_STATUS);
|
|
/* Clearing IntStatus */
|
|
asic3_write_register(asic,
|
|
base +
|
|
ASIC3_GPIO_INT_STATUS, 0);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
|
|
int bit = (1 << i);
|
|
unsigned int irqnr;
|
|
|
|
if (!(istat & bit))
|
|
continue;
|
|
|
|
irqnr = asic->irq_base +
|
|
(ASIC3_GPIOS_PER_BANK * bank)
|
|
+ i;
|
|
generic_handle_irq(irqnr);
|
|
if (asic->irq_bothedge[bank] & bit)
|
|
asic3_irq_flip_edge(asic, base,
|
|
bit);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Handle remaining IRQs in the status register */
|
|
for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) {
|
|
/* They start at bit 4 and go up */
|
|
if (status & (1 << (i - ASIC3_NUM_GPIOS + 4)))
|
|
generic_handle_irq(asic->irq_base + i);
|
|
}
|
|
}
|
|
|
|
if (iter >= MAX_ASIC_ISR_LOOPS)
|
|
dev_err(asic->dev, "interrupt processing overrun\n");
|
|
}
|
|
|
|
static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
|
|
{
|
|
int n;
|
|
|
|
n = (irq - asic->irq_base) >> 4;
|
|
|
|
return (n * (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE));
|
|
}
|
|
|
|
static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
|
|
{
|
|
return (irq - asic->irq_base) & 0xf;
|
|
}
|
|
|
|
static void asic3_mask_gpio_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 val, bank, index;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
|
|
val |= 1 << index;
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_mask_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
int regval;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
regval = asic3_read_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK);
|
|
|
|
regval &= ~(ASIC3_INTMASK_MASK0 <<
|
|
(data->irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
|
|
|
|
asic3_write_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK,
|
|
regval);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_unmask_gpio_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 val, bank, index;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
|
|
val &= ~(1 << index);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_unmask_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
int regval;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
regval = asic3_read_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK);
|
|
|
|
regval |= (ASIC3_INTMASK_MASK0 <<
|
|
(data->irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
|
|
|
|
asic3_write_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK,
|
|
regval);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static int asic3_gpio_irq_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 bank, index;
|
|
u16 trigger, level, edge, bit;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
bit = 1<<index;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
level = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_LEVEL_TRIGGER);
|
|
edge = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_EDGE_TRIGGER);
|
|
trigger = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_TRIGGER_TYPE);
|
|
asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] &= ~bit;
|
|
|
|
if (type == IRQ_TYPE_EDGE_RISING) {
|
|
trigger |= bit;
|
|
edge |= bit;
|
|
} else if (type == IRQ_TYPE_EDGE_FALLING) {
|
|
trigger |= bit;
|
|
edge &= ~bit;
|
|
} else if (type == IRQ_TYPE_EDGE_BOTH) {
|
|
trigger |= bit;
|
|
if (asic3_gpio_get(&asic->gpio, data->irq - asic->irq_base))
|
|
edge &= ~bit;
|
|
else
|
|
edge |= bit;
|
|
asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] |= bit;
|
|
} else if (type == IRQ_TYPE_LEVEL_LOW) {
|
|
trigger &= ~bit;
|
|
level &= ~bit;
|
|
} else if (type == IRQ_TYPE_LEVEL_HIGH) {
|
|
trigger &= ~bit;
|
|
level |= bit;
|
|
} else {
|
|
/*
|
|
* if type == IRQ_TYPE_NONE, we should mask interrupts, but
|
|
* be careful to not unmask them if mask was also called.
|
|
* Probably need internal state for mask.
|
|
*/
|
|
dev_notice(asic->dev, "irq type not changed\n");
|
|
}
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_LEVEL_TRIGGER,
|
|
level);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_EDGE_TRIGGER,
|
|
edge);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE,
|
|
trigger);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 bank, index;
|
|
u16 bit;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
bit = 1<<index;
|
|
|
|
asic3_set_register(asic, bank + ASIC3_GPIO_SLEEP_MASK, bit, !on);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip asic3_gpio_irq_chip = {
|
|
.name = "ASIC3-GPIO",
|
|
.irq_ack = asic3_mask_gpio_irq,
|
|
.irq_mask = asic3_mask_gpio_irq,
|
|
.irq_unmask = asic3_unmask_gpio_irq,
|
|
.irq_set_type = asic3_gpio_irq_type,
|
|
.irq_set_wake = asic3_gpio_irq_set_wake,
|
|
};
|
|
|
|
static struct irq_chip asic3_irq_chip = {
|
|
.name = "ASIC3",
|
|
.irq_ack = asic3_mask_irq,
|
|
.irq_mask = asic3_mask_irq,
|
|
.irq_unmask = asic3_unmask_irq,
|
|
};
|
|
|
|
static int __init asic3_irq_probe(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
unsigned long clksel = 0;
|
|
unsigned int irq, irq_base;
|
|
int ret;
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
asic->irq_nr = ret;
|
|
|
|
/* turn on clock to IRQ controller */
|
|
clksel |= CLOCK_SEL_CX;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
|
|
clksel);
|
|
|
|
irq_base = asic->irq_base;
|
|
|
|
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
|
|
if (irq < asic->irq_base + ASIC3_NUM_GPIOS)
|
|
irq_set_chip(irq, &asic3_gpio_irq_chip);
|
|
else
|
|
irq_set_chip(irq, &asic3_irq_chip);
|
|
|
|
irq_set_chip_data(irq, asic);
|
|
irq_set_handler(irq, handle_level_irq);
|
|
irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
}
|
|
|
|
asic3_write_register(asic, ASIC3_OFFSET(INTR, INT_MASK),
|
|
ASIC3_INTMASK_GINTMASK);
|
|
|
|
irq_set_chained_handler_and_data(asic->irq_nr, asic3_irq_demux, asic);
|
|
irq_set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_irq_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
unsigned int irq, irq_base;
|
|
|
|
irq_base = asic->irq_base;
|
|
|
|
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
|
|
irq_set_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
}
|
|
irq_set_chained_handler(asic->irq_nr, NULL);
|
|
}
|
|
|
|
/* GPIOs */
|
|
static int asic3_gpio_direction(struct gpio_chip *chip,
|
|
unsigned offset, int out)
|
|
{
|
|
u32 mask = ASIC3_GPIO_TO_MASK(offset), out_reg;
|
|
unsigned int gpio_base;
|
|
unsigned long flags;
|
|
struct asic3 *asic;
|
|
|
|
asic = gpiochip_get_data(chip);
|
|
gpio_base = ASIC3_GPIO_TO_BASE(offset);
|
|
|
|
if (gpio_base > ASIC3_GPIO_D_BASE) {
|
|
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
|
|
gpio_base, offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
|
|
out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_DIRECTION);
|
|
|
|
/* Input is 0, Output is 1 */
|
|
if (out)
|
|
out_reg |= mask;
|
|
else
|
|
out_reg &= ~mask;
|
|
|
|
asic3_write_register(asic, gpio_base + ASIC3_GPIO_DIRECTION, out_reg);
|
|
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int asic3_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
return asic3_gpio_direction(chip, offset, 0);
|
|
}
|
|
|
|
static int asic3_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
return asic3_gpio_direction(chip, offset, 1);
|
|
}
|
|
|
|
static int asic3_gpio_get(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
unsigned int gpio_base;
|
|
u32 mask = ASIC3_GPIO_TO_MASK(offset);
|
|
struct asic3 *asic;
|
|
|
|
asic = gpiochip_get_data(chip);
|
|
gpio_base = ASIC3_GPIO_TO_BASE(offset);
|
|
|
|
if (gpio_base > ASIC3_GPIO_D_BASE) {
|
|
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
|
|
gpio_base, offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return !!(asic3_read_register(asic,
|
|
gpio_base + ASIC3_GPIO_STATUS) & mask);
|
|
}
|
|
|
|
static void asic3_gpio_set(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
u32 mask, out_reg;
|
|
unsigned int gpio_base;
|
|
unsigned long flags;
|
|
struct asic3 *asic;
|
|
|
|
asic = gpiochip_get_data(chip);
|
|
gpio_base = ASIC3_GPIO_TO_BASE(offset);
|
|
|
|
if (gpio_base > ASIC3_GPIO_D_BASE) {
|
|
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
|
|
gpio_base, offset);
|
|
return;
|
|
}
|
|
|
|
mask = ASIC3_GPIO_TO_MASK(offset);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
|
|
out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_OUT);
|
|
|
|
if (value)
|
|
out_reg |= mask;
|
|
else
|
|
out_reg &= ~mask;
|
|
|
|
asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg);
|
|
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct asic3 *asic = gpiochip_get_data(chip);
|
|
|
|
return asic->irq_base + offset;
|
|
}
|
|
|
|
static __init int asic3_gpio_probe(struct platform_device *pdev,
|
|
u16 *gpio_config, int num)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
u16 alt_reg[ASIC3_NUM_GPIO_BANKS];
|
|
u16 out_reg[ASIC3_NUM_GPIO_BANKS];
|
|
u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
|
|
int i;
|
|
|
|
memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
|
|
memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
|
|
memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
|
|
|
|
/* Enable all GPIOs */
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, MASK), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, MASK), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, MASK), 0xffff);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
u8 alt, pin, dir, init, bank_num, bit_num;
|
|
u16 config = gpio_config[i];
|
|
|
|
pin = ASIC3_CONFIG_GPIO_PIN(config);
|
|
alt = ASIC3_CONFIG_GPIO_ALT(config);
|
|
dir = ASIC3_CONFIG_GPIO_DIR(config);
|
|
init = ASIC3_CONFIG_GPIO_INIT(config);
|
|
|
|
bank_num = ASIC3_GPIO_TO_BANK(pin);
|
|
bit_num = ASIC3_GPIO_TO_BIT(pin);
|
|
|
|
alt_reg[bank_num] |= (alt << bit_num);
|
|
out_reg[bank_num] |= (init << bit_num);
|
|
dir_reg[bank_num] |= (dir << bit_num);
|
|
}
|
|
|
|
for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) {
|
|
asic3_write_register(asic,
|
|
ASIC3_BANK_TO_BASE(i) +
|
|
ASIC3_GPIO_DIRECTION,
|
|
dir_reg[i]);
|
|
asic3_write_register(asic,
|
|
ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_OUT,
|
|
out_reg[i]);
|
|
asic3_write_register(asic,
|
|
ASIC3_BANK_TO_BASE(i) +
|
|
ASIC3_GPIO_ALT_FUNCTION,
|
|
alt_reg[i]);
|
|
}
|
|
|
|
return gpiochip_add_data(&asic->gpio, asic);
|
|
}
|
|
|
|
static int asic3_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&asic->gpio);
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
|
|
{
|
|
unsigned long flags;
|
|
u32 cdex;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
if (clk->enabled++ == 0) {
|
|
cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
|
|
cdex |= clk->cdex;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
|
|
}
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
|
|
{
|
|
unsigned long flags;
|
|
u32 cdex;
|
|
|
|
WARN_ON(clk->enabled == 0);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
if (--clk->enabled == 0) {
|
|
cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
|
|
cdex &= ~clk->cdex;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
|
|
}
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
/* MFD cells (SPI, PWM, LED, DS1WM, MMC) */
|
|
static struct ds1wm_driver_data ds1wm_pdata = {
|
|
.active_high = 1,
|
|
.reset_recover_delay = 1,
|
|
};
|
|
|
|
static struct resource ds1wm_resources[] = {
|
|
{
|
|
.start = ASIC3_OWM_BASE,
|
|
.end = ASIC3_OWM_BASE + 0x13,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = ASIC3_IRQ_OWM,
|
|
.end = ASIC3_IRQ_OWM,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
},
|
|
};
|
|
|
|
static int ds1wm_enable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
/* Turn on external clocks and the OWM clock */
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
|
|
usleep_range(1000, 5000);
|
|
|
|
/* Reset and enable DS1WM */
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
|
|
ASIC3_EXTCF_OWM_RESET, 1);
|
|
usleep_range(1000, 5000);
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
|
|
ASIC3_EXTCF_OWM_RESET, 0);
|
|
usleep_range(1000, 5000);
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_OWM_EN, 1);
|
|
usleep_range(1000, 5000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds1wm_disable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_OWM_EN, 0);
|
|
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mfd_cell asic3_cell_ds1wm = {
|
|
.name = "ds1wm",
|
|
.enable = ds1wm_enable,
|
|
.disable = ds1wm_disable,
|
|
.platform_data = &ds1wm_pdata,
|
|
.pdata_size = sizeof(ds1wm_pdata),
|
|
.num_resources = ARRAY_SIZE(ds1wm_resources),
|
|
.resources = ds1wm_resources,
|
|
};
|
|
|
|
static void asic3_mmc_pwr(struct platform_device *pdev, int state)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state);
|
|
}
|
|
|
|
static void asic3_mmc_clk_div(struct platform_device *pdev, int state)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state);
|
|
}
|
|
|
|
static struct tmio_mmc_data asic3_mmc_data = {
|
|
.hclk = 24576000,
|
|
.set_pwr = asic3_mmc_pwr,
|
|
.set_clk_div = asic3_mmc_clk_div,
|
|
};
|
|
|
|
static struct resource asic3_mmc_resources[] = {
|
|
{
|
|
.start = ASIC3_SD_CTRL_BASE,
|
|
.end = ASIC3_SD_CTRL_BASE + 0x3ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 0,
|
|
.end = 0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static int asic3_mmc_enable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
/* Not sure if it must be done bit by bit, but leaving as-is */
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_LEVCD, 1);
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_LEVWP, 1);
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_SUSPEND, 0);
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_PCLR, 0);
|
|
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
/* CLK32 used for card detection and for interruption detection
|
|
* when HCLK is stopped.
|
|
*/
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
usleep_range(1000, 5000);
|
|
|
|
/* HCLK 24.576 MHz, BCLK 12.288 MHz: */
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
|
|
CLOCK_SEL_CX | CLOCK_SEL_SD_HCLK_SEL);
|
|
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
|
|
usleep_range(1000, 5000);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_SD_MEM_ENABLE, 1);
|
|
|
|
/* Enable SD card slot 3.3V power supply */
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_SDPWR, 1);
|
|
|
|
/* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */
|
|
tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift,
|
|
ASIC3_SD_CTRL_BASE >> 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_mmc_disable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
/* Put in suspend mode */
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_SUSPEND, 1);
|
|
|
|
/* Disable clocks */
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
return 0;
|
|
}
|
|
|
|
static const struct mfd_cell asic3_cell_mmc = {
|
|
.name = "tmio-mmc",
|
|
.enable = asic3_mmc_enable,
|
|
.disable = asic3_mmc_disable,
|
|
.suspend = asic3_mmc_disable,
|
|
.resume = asic3_mmc_enable,
|
|
.platform_data = &asic3_mmc_data,
|
|
.pdata_size = sizeof(asic3_mmc_data),
|
|
.num_resources = ARRAY_SIZE(asic3_mmc_resources),
|
|
.resources = asic3_mmc_resources,
|
|
};
|
|
|
|
static const int clock_ledn[ASIC3_NUM_LEDS] = {
|
|
[0] = ASIC3_CLOCK_LED0,
|
|
[1] = ASIC3_CLOCK_LED1,
|
|
[2] = ASIC3_CLOCK_LED2,
|
|
};
|
|
|
|
static int asic3_leds_enable(struct platform_device *pdev)
|
|
{
|
|
const struct mfd_cell *cell = mfd_get_cell(pdev);
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
asic3_clk_enable(asic, &asic->clocks[clock_ledn[cell->id]]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_leds_disable(struct platform_device *pdev)
|
|
{
|
|
const struct mfd_cell *cell = mfd_get_cell(pdev);
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_leds_suspend(struct platform_device *pdev)
|
|
{
|
|
const struct mfd_cell *cell = mfd_get_cell(pdev);
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
|
|
usleep_range(1000, 5000);
|
|
|
|
asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = {
|
|
[0] = {
|
|
.name = "leds-asic3",
|
|
.id = 0,
|
|
.enable = asic3_leds_enable,
|
|
.disable = asic3_leds_disable,
|
|
.suspend = asic3_leds_suspend,
|
|
.resume = asic3_leds_enable,
|
|
},
|
|
[1] = {
|
|
.name = "leds-asic3",
|
|
.id = 1,
|
|
.enable = asic3_leds_enable,
|
|
.disable = asic3_leds_disable,
|
|
.suspend = asic3_leds_suspend,
|
|
.resume = asic3_leds_enable,
|
|
},
|
|
[2] = {
|
|
.name = "leds-asic3",
|
|
.id = 2,
|
|
.enable = asic3_leds_enable,
|
|
.disable = asic3_leds_disable,
|
|
.suspend = asic3_leds_suspend,
|
|
.resume = asic3_leds_enable,
|
|
},
|
|
};
|
|
|
|
static int __init asic3_mfd_probe(struct platform_device *pdev,
|
|
struct asic3_platform_data *pdata,
|
|
struct resource *mem)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
struct resource *mem_sdio;
|
|
int irq, ret;
|
|
|
|
mem_sdio = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (!mem_sdio)
|
|
dev_dbg(asic->dev, "no SDIO MEM resource\n");
|
|
|
|
irq = platform_get_irq(pdev, 1);
|
|
if (irq < 0)
|
|
dev_dbg(asic->dev, "no SDIO IRQ resource\n");
|
|
|
|
/* DS1WM */
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_OWM_SMB, 0);
|
|
|
|
ds1wm_resources[0].start >>= asic->bus_shift;
|
|
ds1wm_resources[0].end >>= asic->bus_shift;
|
|
|
|
/* MMC */
|
|
if (mem_sdio) {
|
|
asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >>
|
|
asic->bus_shift) + mem_sdio->start,
|
|
ASIC3_SD_CONFIG_SIZE >> asic->bus_shift);
|
|
if (!asic->tmio_cnf) {
|
|
ret = -ENOMEM;
|
|
dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n");
|
|
goto out;
|
|
}
|
|
}
|
|
asic3_mmc_resources[0].start >>= asic->bus_shift;
|
|
asic3_mmc_resources[0].end >>= asic->bus_shift;
|
|
|
|
if (pdata->clock_rate) {
|
|
ds1wm_pdata.clock_rate = pdata->clock_rate;
|
|
ret = mfd_add_devices(&pdev->dev, pdev->id,
|
|
&asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
if (mem_sdio && (irq >= 0)) {
|
|
ret = mfd_add_devices(&pdev->dev, pdev->id,
|
|
&asic3_cell_mmc, 1, mem_sdio, irq, NULL);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
ret = 0;
|
|
if (pdata->leds) {
|
|
int i;
|
|
|
|
for (i = 0; i < ASIC3_NUM_LEDS; ++i) {
|
|
asic3_cell_leds[i].platform_data = &pdata->leds[i];
|
|
asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]);
|
|
}
|
|
ret = mfd_add_devices(&pdev->dev, 0,
|
|
asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void asic3_mfd_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
mfd_remove_devices(&pdev->dev);
|
|
iounmap(asic->tmio_cnf);
|
|
}
|
|
|
|
/* Core */
|
|
static int __init asic3_probe(struct platform_device *pdev)
|
|
{
|
|
struct asic3_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct asic3 *asic;
|
|
struct resource *mem;
|
|
unsigned long clksel;
|
|
int ret = 0;
|
|
|
|
asic = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct asic3), GFP_KERNEL);
|
|
if (!asic)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&asic->lock);
|
|
platform_set_drvdata(pdev, asic);
|
|
asic->dev = &pdev->dev;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem) {
|
|
dev_err(asic->dev, "no MEM resource\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
asic->mapping = ioremap(mem->start, resource_size(mem));
|
|
if (!asic->mapping) {
|
|
dev_err(asic->dev, "Couldn't ioremap\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
asic->irq_base = pdata->irq_base;
|
|
|
|
/* calculate bus shift from mem resource */
|
|
asic->bus_shift = 2 - (resource_size(mem) >> 12);
|
|
|
|
clksel = 0;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
|
|
|
|
ret = asic3_irq_probe(pdev);
|
|
if (ret < 0) {
|
|
dev_err(asic->dev, "Couldn't probe IRQs\n");
|
|
goto out_unmap;
|
|
}
|
|
|
|
asic->gpio.label = "asic3";
|
|
asic->gpio.base = pdata->gpio_base;
|
|
asic->gpio.ngpio = ASIC3_NUM_GPIOS;
|
|
asic->gpio.get = asic3_gpio_get;
|
|
asic->gpio.set = asic3_gpio_set;
|
|
asic->gpio.direction_input = asic3_gpio_direction_input;
|
|
asic->gpio.direction_output = asic3_gpio_direction_output;
|
|
asic->gpio.to_irq = asic3_gpio_to_irq;
|
|
|
|
ret = asic3_gpio_probe(pdev,
|
|
pdata->gpio_config,
|
|
pdata->gpio_config_num);
|
|
if (ret < 0) {
|
|
dev_err(asic->dev, "GPIO probe failed\n");
|
|
goto out_irq;
|
|
}
|
|
|
|
/* Making a per-device copy is only needed for the
|
|
* theoretical case of multiple ASIC3s on one board:
|
|
*/
|
|
memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init));
|
|
|
|
asic3_mfd_probe(pdev, pdata, mem);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
(ASIC3_EXTCF_CF0_BUF_EN|ASIC3_EXTCF_CF0_PWAIT_EN), 1);
|
|
|
|
dev_info(asic->dev, "ASIC3 Core driver\n");
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
asic3_irq_remove(pdev);
|
|
|
|
out_unmap:
|
|
iounmap(asic->mapping);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int asic3_remove(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
(ASIC3_EXTCF_CF0_BUF_EN|ASIC3_EXTCF_CF0_PWAIT_EN), 0);
|
|
|
|
asic3_mfd_remove(pdev);
|
|
|
|
ret = asic3_gpio_remove(pdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
asic3_irq_remove(pdev);
|
|
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0);
|
|
|
|
iounmap(asic->mapping);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_shutdown(struct platform_device *pdev)
|
|
{
|
|
}
|
|
|
|
static struct platform_driver asic3_device_driver = {
|
|
.driver = {
|
|
.name = "asic3",
|
|
},
|
|
.remove = asic3_remove,
|
|
.shutdown = asic3_shutdown,
|
|
};
|
|
|
|
static int __init asic3_init(void)
|
|
{
|
|
int retval = 0;
|
|
|
|
retval = platform_driver_probe(&asic3_device_driver, asic3_probe);
|
|
|
|
return retval;
|
|
}
|
|
|
|
subsys_initcall(asic3_init);
|