mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 20:56:40 +07:00
ba25f9dcc4
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2885 lines
75 KiB
C
2885 lines
75 KiB
C
|
|
/* sx.c -- driver for the Specialix SX series cards.
|
|
*
|
|
* This driver will also support the older SI, and XIO cards.
|
|
*
|
|
*
|
|
* (C) 1998 - 2004 R.E.Wolff@BitWizard.nl
|
|
*
|
|
* Simon Allen (simonallen@cix.compulink.co.uk) wrote a previous
|
|
* version of this driver. Some fragments may have been copied. (none
|
|
* yet :-)
|
|
*
|
|
* Specialix pays for the development and support of this driver.
|
|
* Please DO contact support@specialix.co.uk if you require
|
|
* support. But please read the documentation (sx.txt) first.
|
|
*
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be
|
|
* useful, but WITHOUT ANY WARRANTY; without even the implied
|
|
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
|
|
* PURPOSE. See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this program; if not, write to the Free
|
|
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
|
|
* USA.
|
|
*
|
|
* Revision history:
|
|
* Revision 1.33 2000/03/09 10:00:00 pvdl,wolff
|
|
* - Fixed module and port counting
|
|
* - Fixed signal handling
|
|
* - Fixed an Ooops
|
|
*
|
|
* Revision 1.32 2000/03/07 09:00:00 wolff,pvdl
|
|
* - Fixed some sx_dprintk typos
|
|
* - added detection for an invalid board/module configuration
|
|
*
|
|
* Revision 1.31 2000/03/06 12:00:00 wolff,pvdl
|
|
* - Added support for EISA
|
|
*
|
|
* Revision 1.30 2000/01/21 17:43:06 wolff
|
|
* - Added support for SX+
|
|
*
|
|
* Revision 1.26 1999/08/05 15:22:14 wolff
|
|
* - Port to 2.3.x
|
|
* - Reformatted to Linus' liking.
|
|
*
|
|
* Revision 1.25 1999/07/30 14:24:08 wolff
|
|
* Had accidentally left "gs_debug" set to "-1" instead of "off" (=0).
|
|
*
|
|
* Revision 1.24 1999/07/28 09:41:52 wolff
|
|
* - I noticed the remark about use-count straying in sx.txt. I checked
|
|
* sx_open, and found a few places where that could happen. I hope it's
|
|
* fixed now.
|
|
*
|
|
* Revision 1.23 1999/07/28 08:56:06 wolff
|
|
* - Fixed crash when sx_firmware run twice.
|
|
* - Added sx_slowpoll as a module parameter (I guess nobody really wanted
|
|
* to change it from the default... )
|
|
* - Fixed a stupid editing problem I introduced in 1.22.
|
|
* - Fixed dropping characters on a termios change.
|
|
*
|
|
* Revision 1.22 1999/07/26 21:01:43 wolff
|
|
* Russell Brown noticed that I had overlooked 4 out of six modem control
|
|
* signals in sx_getsignals. Ooops.
|
|
*
|
|
* Revision 1.21 1999/07/23 09:11:33 wolff
|
|
* I forgot to free dynamically allocated memory when the driver is unloaded.
|
|
*
|
|
* Revision 1.20 1999/07/20 06:25:26 wolff
|
|
* The "closing wait" wasn't honoured. Thanks to James Griffiths for
|
|
* reporting this.
|
|
*
|
|
* Revision 1.19 1999/07/11 08:59:59 wolff
|
|
* Fixed an oops in close, when an open was pending. Changed the memtest
|
|
* a bit. Should also test the board in word-mode, however my card fails the
|
|
* memtest then. I still have to figure out what is wrong...
|
|
*
|
|
* Revision 1.18 1999/06/10 09:38:42 wolff
|
|
* Changed the format of the firmware revision from %04x to %x.%02x .
|
|
*
|
|
* Revision 1.17 1999/06/04 09:44:35 wolff
|
|
* fixed problem: reference to pci stuff when config_pci was off...
|
|
* Thanks to Jorge Novo for noticing this.
|
|
*
|
|
* Revision 1.16 1999/06/02 08:30:15 wolff
|
|
* added/removed the workaround for the DCD bug in the Firmware.
|
|
* A bit more debugging code to locate that...
|
|
*
|
|
* Revision 1.15 1999/06/01 11:35:30 wolff
|
|
* when DCD is left low (floating?), on TA's the firmware first tells us
|
|
* that DCD is high, but after a short while suddenly comes to the
|
|
* conclusion that it is low. All this would be fine, if it weren't that
|
|
* Unix requires us to send a "hangup" signal in that case. This usually
|
|
* all happens BEFORE the program has had a chance to ioctl the device
|
|
* into clocal mode..
|
|
*
|
|
* Revision 1.14 1999/05/25 11:18:59 wolff
|
|
* Added PCI-fix.
|
|
* Added checks for return code of sx_sendcommand.
|
|
* Don't issue "reconfig" if port isn't open yet. (bit us on TA modules...)
|
|
*
|
|
* Revision 1.13 1999/04/29 15:18:01 wolff
|
|
* Fixed an "oops" that showed on SuSE 6.0 systems.
|
|
* Activate DTR again after stty 0.
|
|
*
|
|
* Revision 1.12 1999/04/29 07:49:52 wolff
|
|
* Improved "stty 0" handling a bit. (used to change baud to 9600 assuming
|
|
* the connection would be dropped anyway. That is not always the case,
|
|
* and confuses people).
|
|
* Told the card to always monitor the modem signals.
|
|
* Added support for dynamic gs_debug adjustments.
|
|
* Now tells the rest of the system the number of ports.
|
|
*
|
|
* Revision 1.11 1999/04/24 11:11:30 wolff
|
|
* Fixed two stupid typos in the memory test.
|
|
*
|
|
* Revision 1.10 1999/04/24 10:53:39 wolff
|
|
* Added some of Christian's suggestions.
|
|
* Fixed an HW_COOK_IN bug (ISIG was not in I_OTHER. We used to trust the
|
|
* card to send the signal to the process.....)
|
|
*
|
|
* Revision 1.9 1999/04/23 07:26:38 wolff
|
|
* Included Christian Lademann's 2.0 compile-warning fixes and interrupt
|
|
* assignment redesign.
|
|
* Cleanup of some other stuff.
|
|
*
|
|
* Revision 1.8 1999/04/16 13:05:30 wolff
|
|
* fixed a DCD change unnoticed bug.
|
|
*
|
|
* Revision 1.7 1999/04/14 22:19:51 wolff
|
|
* Fixed typo that showed up in 2.0.x builds (get_user instead of Get_user!)
|
|
*
|
|
* Revision 1.6 1999/04/13 18:40:20 wolff
|
|
* changed misc-minor to 161, as assigned by HPA.
|
|
*
|
|
* Revision 1.5 1999/04/13 15:12:25 wolff
|
|
* Fixed use-count leak when "hangup" occurred.
|
|
* Added workaround for a stupid-PCIBIOS bug.
|
|
*
|
|
*
|
|
* Revision 1.4 1999/04/01 22:47:40 wolff
|
|
* Fixed < 1M linux-2.0 problem.
|
|
* (vremap isn't compatible with ioremap in that case)
|
|
*
|
|
* Revision 1.3 1999/03/31 13:45:45 wolff
|
|
* Firmware loading is now done through a separate IOCTL.
|
|
*
|
|
* Revision 1.2 1999/03/28 12:22:29 wolff
|
|
* rcs cleanup
|
|
*
|
|
* Revision 1.1 1999/03/28 12:10:34 wolff
|
|
* Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS).
|
|
*
|
|
* Revision 0.12 1999/03/28 09:20:10 wolff
|
|
* Fixed problem in 0.11, continueing cleanup.
|
|
*
|
|
* Revision 0.11 1999/03/28 08:46:44 wolff
|
|
* cleanup. Not good.
|
|
*
|
|
* Revision 0.10 1999/03/28 08:09:43 wolff
|
|
* Fixed loosing characters on close.
|
|
*
|
|
* Revision 0.9 1999/03/21 22:52:01 wolff
|
|
* Ported back to 2.2.... (minor things)
|
|
*
|
|
* Revision 0.8 1999/03/21 22:40:33 wolff
|
|
* Port to 2.0
|
|
*
|
|
* Revision 0.7 1999/03/21 19:06:34 wolff
|
|
* Fixed hangup processing.
|
|
*
|
|
* Revision 0.6 1999/02/05 08:45:14 wolff
|
|
* fixed real_raw problems. Inclusion into kernel imminent.
|
|
*
|
|
* Revision 0.5 1998/12/21 23:51:06 wolff
|
|
* Snatched a nasty bug: sx_transmit_chars was getting re-entered, and it
|
|
* shouldn't have. THATs why I want to have transmit interrupts even when
|
|
* the buffer is empty.
|
|
*
|
|
* Revision 0.4 1998/12/17 09:34:46 wolff
|
|
* PPP works. ioctl works. Basically works!
|
|
*
|
|
* Revision 0.3 1998/12/15 13:05:18 wolff
|
|
* It works! Wow! Gotta start implementing IOCTL and stuff....
|
|
*
|
|
* Revision 0.2 1998/12/01 08:33:53 wolff
|
|
* moved over to 2.1.130
|
|
*
|
|
* Revision 0.1 1998/11/03 21:23:51 wolff
|
|
* Initial revision. Detects SX card.
|
|
*
|
|
* */
|
|
|
|
#define SX_VERSION 1.33
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/major.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/eisa.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/* The 3.0.0 version of sxboards/sxwindow.h uses BYTE and WORD.... */
|
|
#define BYTE u8
|
|
#define WORD u16
|
|
|
|
/* .... but the 3.0.4 version uses _u8 and _u16. */
|
|
#define _u8 u8
|
|
#define _u16 u16
|
|
|
|
#include "sxboards.h"
|
|
#include "sxwindow.h"
|
|
|
|
#include <linux/generic_serial.h>
|
|
#include "sx.h"
|
|
|
|
/* I don't think that this driver can handle more than 256 ports on
|
|
one machine. You'll have to increase the number of boards in sx.h
|
|
if you want more than 4 boards. */
|
|
|
|
#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8
|
|
#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000
|
|
#endif
|
|
|
|
/* Configurable options:
|
|
(Don't be too sure that it'll work if you toggle them) */
|
|
|
|
/* Am I paranoid or not ? ;-) */
|
|
#undef SX_PARANOIA_CHECK
|
|
|
|
/* 20 -> 2000 per second. The card should rate-limit interrupts at 100
|
|
Hz, but it is user configurable. I don't recommend going above 1000
|
|
Hz. The interrupt ratelimit might trigger if the interrupt is
|
|
shared with a very active other device. */
|
|
#define IRQ_RATE_LIMIT 20
|
|
|
|
/* Sharing interrupts is possible now. If the other device wants more
|
|
than 2000 interrupts per second, we'd gracefully decline further
|
|
interrupts. That's not what we want. On the other hand, if the
|
|
other device interrupts 2000 times a second, don't use the SX
|
|
interrupt. Use polling. */
|
|
#undef IRQ_RATE_LIMIT
|
|
|
|
#if 0
|
|
/* Not implemented */
|
|
/*
|
|
* The following defines are mostly for testing purposes. But if you need
|
|
* some nice reporting in your syslog, you can define them also.
|
|
*/
|
|
#define SX_REPORT_FIFO
|
|
#define SX_REPORT_OVERRUN
|
|
#endif
|
|
|
|
/* Function prototypes */
|
|
static void sx_disable_tx_interrupts(void *ptr);
|
|
static void sx_enable_tx_interrupts(void *ptr);
|
|
static void sx_disable_rx_interrupts(void *ptr);
|
|
static void sx_enable_rx_interrupts(void *ptr);
|
|
static int sx_get_CD(void *ptr);
|
|
static void sx_shutdown_port(void *ptr);
|
|
static int sx_set_real_termios(void *ptr);
|
|
static void sx_close(void *ptr);
|
|
static int sx_chars_in_buffer(void *ptr);
|
|
static int sx_init_board(struct sx_board *board);
|
|
static int sx_init_portstructs(int nboards, int nports);
|
|
static int sx_fw_ioctl(struct inode *inode, struct file *filp,
|
|
unsigned int cmd, unsigned long arg);
|
|
static int sx_init_drivers(void);
|
|
|
|
static struct tty_driver *sx_driver;
|
|
|
|
static DEFINE_MUTEX(sx_boards_lock);
|
|
static struct sx_board boards[SX_NBOARDS];
|
|
static struct sx_port *sx_ports;
|
|
static int sx_initialized;
|
|
static int sx_nports;
|
|
static int sx_debug;
|
|
|
|
/* You can have the driver poll your card.
|
|
- Set sx_poll to 1 to poll every timer tick (10ms on Intel).
|
|
This is used when the card cannot use an interrupt for some reason.
|
|
|
|
- set sx_slowpoll to 100 to do an extra poll once a second (on Intel). If
|
|
the driver misses an interrupt (report this if it DOES happen to you!)
|
|
everything will continue to work....
|
|
*/
|
|
static int sx_poll = 1;
|
|
static int sx_slowpoll;
|
|
|
|
/* The card limits the number of interrupts per second.
|
|
At 115k2 "100" should be sufficient.
|
|
If you're using higher baudrates, you can increase this...
|
|
*/
|
|
|
|
static int sx_maxints = 100;
|
|
|
|
#ifdef CONFIG_ISA
|
|
|
|
/* These are the only open spaces in my computer. Yours may have more
|
|
or less.... -- REW
|
|
duh: Card at 0xa0000 is possible on HP Netserver?? -- pvdl
|
|
*/
|
|
static int sx_probe_addrs[] = {
|
|
0xc0000, 0xd0000, 0xe0000,
|
|
0xc8000, 0xd8000, 0xe8000
|
|
};
|
|
static int si_probe_addrs[] = {
|
|
0xc0000, 0xd0000, 0xe0000,
|
|
0xc8000, 0xd8000, 0xe8000, 0xa0000
|
|
};
|
|
static int si1_probe_addrs[] = {
|
|
0xd0000
|
|
};
|
|
|
|
#define NR_SX_ADDRS ARRAY_SIZE(sx_probe_addrs)
|
|
#define NR_SI_ADDRS ARRAY_SIZE(si_probe_addrs)
|
|
#define NR_SI1_ADDRS ARRAY_SIZE(si1_probe_addrs)
|
|
|
|
module_param_array(sx_probe_addrs, int, NULL, 0);
|
|
module_param_array(si_probe_addrs, int, NULL, 0);
|
|
#endif
|
|
|
|
/* Set the mask to all-ones. This alas, only supports 32 interrupts.
|
|
Some architectures may need more. */
|
|
static int sx_irqmask = -1;
|
|
|
|
module_param(sx_poll, int, 0);
|
|
module_param(sx_slowpoll, int, 0);
|
|
module_param(sx_maxints, int, 0);
|
|
module_param(sx_debug, int, 0);
|
|
module_param(sx_irqmask, int, 0);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct real_driver sx_real_driver = {
|
|
sx_disable_tx_interrupts,
|
|
sx_enable_tx_interrupts,
|
|
sx_disable_rx_interrupts,
|
|
sx_enable_rx_interrupts,
|
|
sx_get_CD,
|
|
sx_shutdown_port,
|
|
sx_set_real_termios,
|
|
sx_chars_in_buffer,
|
|
sx_close,
|
|
};
|
|
|
|
/*
|
|
This driver can spew a whole lot of debugging output at you. If you
|
|
need maximum performance, you should disable the DEBUG define. To
|
|
aid in debugging in the field, I'm leaving the compile-time debug
|
|
features enabled, and disable them "runtime". That allows me to
|
|
instruct people with problems to enable debugging without requiring
|
|
them to recompile...
|
|
*/
|
|
#define DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define sx_dprintk(f, str...) if (sx_debug & f) printk (str)
|
|
#else
|
|
#define sx_dprintk(f, str...) /* nothing */
|
|
#endif
|
|
|
|
#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__FUNCTION__)
|
|
#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__FUNCTION__)
|
|
|
|
#define func_enter2() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \
|
|
__FUNCTION__, port->line)
|
|
|
|
/*
|
|
* Firmware loader driver specific routines
|
|
*
|
|
*/
|
|
|
|
static const struct file_operations sx_fw_fops = {
|
|
.owner = THIS_MODULE,
|
|
.ioctl = sx_fw_ioctl,
|
|
};
|
|
|
|
static struct miscdevice sx_fw_device = {
|
|
SXCTL_MISC_MINOR, "sxctl", &sx_fw_fops
|
|
};
|
|
|
|
#ifdef SX_PARANOIA_CHECK
|
|
|
|
/* This doesn't work. Who's paranoid around here? Not me! */
|
|
|
|
static inline int sx_paranoia_check(struct sx_port const *port,
|
|
char *name, const char *routine)
|
|
{
|
|
static const char *badmagic = KERN_ERR "sx: Warning: bad sx port magic "
|
|
"number for device %s in %s\n";
|
|
static const char *badinfo = KERN_ERR "sx: Warning: null sx port for "
|
|
"device %s in %s\n";
|
|
|
|
if (!port) {
|
|
printk(badinfo, name, routine);
|
|
return 1;
|
|
}
|
|
if (port->magic != SX_MAGIC) {
|
|
printk(badmagic, name, routine);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define sx_paranoia_check(a,b,c) 0
|
|
#endif
|
|
|
|
/* The timeouts. First try 30 times as fast as possible. Then give
|
|
the card some time to breathe between accesses. (Otherwise the
|
|
processor on the card might not be able to access its OWN bus... */
|
|
|
|
#define TIMEOUT_1 30
|
|
#define TIMEOUT_2 1000000
|
|
|
|
#ifdef DEBUG
|
|
static void my_hd_io(void __iomem *p, int len)
|
|
{
|
|
int i, j, ch;
|
|
unsigned char __iomem *addr = p;
|
|
|
|
for (i = 0; i < len; i += 16) {
|
|
printk("%p ", addr + i);
|
|
for (j = 0; j < 16; j++) {
|
|
printk("%02x %s", readb(addr + j + i),
|
|
(j == 7) ? " " : "");
|
|
}
|
|
for (j = 0; j < 16; j++) {
|
|
ch = readb(addr + j + i);
|
|
printk("%c", (ch < 0x20) ? '.' :
|
|
((ch > 0x7f) ? '.' : ch));
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
static void my_hd(void *p, int len)
|
|
{
|
|
int i, j, ch;
|
|
unsigned char *addr = p;
|
|
|
|
for (i = 0; i < len; i += 16) {
|
|
printk("%p ", addr + i);
|
|
for (j = 0; j < 16; j++) {
|
|
printk("%02x %s", addr[j + i], (j == 7) ? " " : "");
|
|
}
|
|
for (j = 0; j < 16; j++) {
|
|
ch = addr[j + i];
|
|
printk("%c", (ch < 0x20) ? '.' :
|
|
((ch > 0x7f) ? '.' : ch));
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* This needs redoing for Alpha -- REW -- Done. */
|
|
|
|
static inline void write_sx_byte(struct sx_board *board, int offset, u8 byte)
|
|
{
|
|
writeb(byte, board->base + offset);
|
|
}
|
|
|
|
static inline u8 read_sx_byte(struct sx_board *board, int offset)
|
|
{
|
|
return readb(board->base + offset);
|
|
}
|
|
|
|
static inline void write_sx_word(struct sx_board *board, int offset, u16 word)
|
|
{
|
|
writew(word, board->base + offset);
|
|
}
|
|
|
|
static inline u16 read_sx_word(struct sx_board *board, int offset)
|
|
{
|
|
return readw(board->base + offset);
|
|
}
|
|
|
|
static int sx_busy_wait_eq(struct sx_board *board,
|
|
int offset, int mask, int correctval)
|
|
{
|
|
int i;
|
|
|
|
func_enter();
|
|
|
|
for (i = 0; i < TIMEOUT_1; i++)
|
|
if ((read_sx_byte(board, offset) & mask) == correctval) {
|
|
func_exit();
|
|
return 1;
|
|
}
|
|
|
|
for (i = 0; i < TIMEOUT_2; i++) {
|
|
if ((read_sx_byte(board, offset) & mask) == correctval) {
|
|
func_exit();
|
|
return 1;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
|
|
static int sx_busy_wait_neq(struct sx_board *board,
|
|
int offset, int mask, int badval)
|
|
{
|
|
int i;
|
|
|
|
func_enter();
|
|
|
|
for (i = 0; i < TIMEOUT_1; i++)
|
|
if ((read_sx_byte(board, offset) & mask) != badval) {
|
|
func_exit();
|
|
return 1;
|
|
}
|
|
|
|
for (i = 0; i < TIMEOUT_2; i++) {
|
|
if ((read_sx_byte(board, offset) & mask) != badval) {
|
|
func_exit();
|
|
return 1;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
|
|
/* 5.6.4 of 6210028 r2.3 */
|
|
static int sx_reset(struct sx_board *board)
|
|
{
|
|
func_enter();
|
|
|
|
if (IS_SX_BOARD(board)) {
|
|
|
|
write_sx_byte(board, SX_CONFIG, 0);
|
|
write_sx_byte(board, SX_RESET, 1); /* Value doesn't matter */
|
|
|
|
if (!sx_busy_wait_eq(board, SX_RESET_STATUS, 1, 0)) {
|
|
printk(KERN_INFO "sx: Card doesn't respond to "
|
|
"reset...\n");
|
|
return 0;
|
|
}
|
|
} else if (IS_EISA_BOARD(board)) {
|
|
outb(board->irq << 4, board->eisa_base + 0xc02);
|
|
} else if (IS_SI1_BOARD(board)) {
|
|
write_sx_byte(board, SI1_ISA_RESET, 0); /*value doesn't matter*/
|
|
} else {
|
|
/* Gory details of the SI/ISA board */
|
|
write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_SET);
|
|
write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_CLEAR);
|
|
write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_CLEAR);
|
|
write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_CLEAR);
|
|
write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR);
|
|
write_sx_byte(board, SI2_ISA_IRQSET, SI2_ISA_IRQSET_CLEAR);
|
|
}
|
|
|
|
func_exit();
|
|
return 1;
|
|
}
|
|
|
|
/* This doesn't work on machines where "NULL" isn't 0 */
|
|
/* If you have one of those, someone will need to write
|
|
the equivalent of this, which will amount to about 3 lines. I don't
|
|
want to complicate this right now. -- REW
|
|
(See, I do write comments every now and then :-) */
|
|
#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem))
|
|
|
|
#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem))
|
|
#define MODU_OFFSET(board,addr,elem) (addr + OFFSETOF (_SXMODULE, elem))
|
|
#define BRD_OFFSET(board,elem) (OFFSETOF (_SXCARD, elem))
|
|
|
|
#define sx_write_channel_byte(port, elem, val) \
|
|
write_sx_byte (port->board, CHAN_OFFSET (port, elem), val)
|
|
|
|
#define sx_read_channel_byte(port, elem) \
|
|
read_sx_byte (port->board, CHAN_OFFSET (port, elem))
|
|
|
|
#define sx_write_channel_word(port, elem, val) \
|
|
write_sx_word (port->board, CHAN_OFFSET (port, elem), val)
|
|
|
|
#define sx_read_channel_word(port, elem) \
|
|
read_sx_word (port->board, CHAN_OFFSET (port, elem))
|
|
|
|
#define sx_write_module_byte(board, addr, elem, val) \
|
|
write_sx_byte (board, MODU_OFFSET (board, addr, elem), val)
|
|
|
|
#define sx_read_module_byte(board, addr, elem) \
|
|
read_sx_byte (board, MODU_OFFSET (board, addr, elem))
|
|
|
|
#define sx_write_module_word(board, addr, elem, val) \
|
|
write_sx_word (board, MODU_OFFSET (board, addr, elem), val)
|
|
|
|
#define sx_read_module_word(board, addr, elem) \
|
|
read_sx_word (board, MODU_OFFSET (board, addr, elem))
|
|
|
|
#define sx_write_board_byte(board, elem, val) \
|
|
write_sx_byte (board, BRD_OFFSET (board, elem), val)
|
|
|
|
#define sx_read_board_byte(board, elem) \
|
|
read_sx_byte (board, BRD_OFFSET (board, elem))
|
|
|
|
#define sx_write_board_word(board, elem, val) \
|
|
write_sx_word (board, BRD_OFFSET (board, elem), val)
|
|
|
|
#define sx_read_board_word(board, elem) \
|
|
read_sx_word (board, BRD_OFFSET (board, elem))
|
|
|
|
static int sx_start_board(struct sx_board *board)
|
|
{
|
|
if (IS_SX_BOARD(board)) {
|
|
write_sx_byte(board, SX_CONFIG, SX_CONF_BUSEN);
|
|
} else if (IS_EISA_BOARD(board)) {
|
|
write_sx_byte(board, SI2_EISA_OFF, SI2_EISA_VAL);
|
|
outb((board->irq << 4) | 4, board->eisa_base + 0xc02);
|
|
} else if (IS_SI1_BOARD(board)) {
|
|
write_sx_byte(board, SI1_ISA_RESET_CLEAR, 0);
|
|
write_sx_byte(board, SI1_ISA_INTCL, 0);
|
|
} else {
|
|
/* Don't bug me about the clear_set.
|
|
I haven't the foggiest idea what it's about -- REW */
|
|
write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_CLEAR);
|
|
write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
#define SX_IRQ_REG_VAL(board) \
|
|
((board->flags & SX_ISA_BOARD) ? (board->irq << 4) : 0)
|
|
|
|
/* Note. The SX register is write-only. Therefore, we have to enable the
|
|
bus too. This is a no-op, if you don't mess with this driver... */
|
|
static int sx_start_interrupts(struct sx_board *board)
|
|
{
|
|
|
|
/* Don't call this with board->irq == 0 */
|
|
|
|
if (IS_SX_BOARD(board)) {
|
|
write_sx_byte(board, SX_CONFIG, SX_IRQ_REG_VAL(board) |
|
|
SX_CONF_BUSEN | SX_CONF_HOSTIRQ);
|
|
} else if (IS_EISA_BOARD(board)) {
|
|
inb(board->eisa_base + 0xc03);
|
|
} else if (IS_SI1_BOARD(board)) {
|
|
write_sx_byte(board, SI1_ISA_INTCL, 0);
|
|
write_sx_byte(board, SI1_ISA_INTCL_CLEAR, 0);
|
|
} else {
|
|
switch (board->irq) {
|
|
case 11:
|
|
write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET);
|
|
break;
|
|
case 12:
|
|
write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET);
|
|
break;
|
|
case 15:
|
|
write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET);
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "sx: SI/XIO card doesn't support "
|
|
"interrupt %d.\n", board->irq);
|
|
return 0;
|
|
}
|
|
write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int sx_send_command(struct sx_port *port,
|
|
int command, int mask, int newstat)
|
|
{
|
|
func_enter2();
|
|
write_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat), command);
|
|
func_exit();
|
|
return sx_busy_wait_eq(port->board, CHAN_OFFSET(port, hi_hstat), mask,
|
|
newstat);
|
|
}
|
|
|
|
static char *mod_type_s(int module_type)
|
|
{
|
|
switch (module_type) {
|
|
case TA4:
|
|
return "TA4";
|
|
case TA8:
|
|
return "TA8";
|
|
case TA4_ASIC:
|
|
return "TA4_ASIC";
|
|
case TA8_ASIC:
|
|
return "TA8_ASIC";
|
|
case MTA_CD1400:
|
|
return "MTA_CD1400";
|
|
case SXDC:
|
|
return "SXDC";
|
|
default:
|
|
return "Unknown/invalid";
|
|
}
|
|
}
|
|
|
|
static char *pan_type_s(int pan_type)
|
|
{
|
|
switch (pan_type) {
|
|
case MOD_RS232DB25:
|
|
return "MOD_RS232DB25";
|
|
case MOD_RS232RJ45:
|
|
return "MOD_RS232RJ45";
|
|
case MOD_RS422DB25:
|
|
return "MOD_RS422DB25";
|
|
case MOD_PARALLEL:
|
|
return "MOD_PARALLEL";
|
|
case MOD_2_RS232DB25:
|
|
return "MOD_2_RS232DB25";
|
|
case MOD_2_RS232RJ45:
|
|
return "MOD_2_RS232RJ45";
|
|
case MOD_2_RS422DB25:
|
|
return "MOD_2_RS422DB25";
|
|
case MOD_RS232DB25MALE:
|
|
return "MOD_RS232DB25MALE";
|
|
case MOD_2_PARALLEL:
|
|
return "MOD_2_PARALLEL";
|
|
case MOD_BLANK:
|
|
return "empty";
|
|
default:
|
|
return "invalid";
|
|
}
|
|
}
|
|
|
|
static int mod_compat_type(int module_type)
|
|
{
|
|
return module_type >> 4;
|
|
}
|
|
|
|
static void sx_reconfigure_port(struct sx_port *port)
|
|
{
|
|
if (sx_read_channel_byte(port, hi_hstat) == HS_IDLE_OPEN) {
|
|
if (sx_send_command(port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) {
|
|
printk(KERN_WARNING "sx: Sent reconfigure command, but "
|
|
"card didn't react.\n");
|
|
}
|
|
} else {
|
|
sx_dprintk(SX_DEBUG_TERMIOS, "sx: Not sending reconfigure: "
|
|
"port isn't open (%02x).\n",
|
|
sx_read_channel_byte(port, hi_hstat));
|
|
}
|
|
}
|
|
|
|
static void sx_setsignals(struct sx_port *port, int dtr, int rts)
|
|
{
|
|
int t;
|
|
func_enter2();
|
|
|
|
t = sx_read_channel_byte(port, hi_op);
|
|
if (dtr >= 0)
|
|
t = dtr ? (t | OP_DTR) : (t & ~OP_DTR);
|
|
if (rts >= 0)
|
|
t = rts ? (t | OP_RTS) : (t & ~OP_RTS);
|
|
sx_write_channel_byte(port, hi_op, t);
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts);
|
|
|
|
func_exit();
|
|
}
|
|
|
|
static int sx_getsignals(struct sx_port *port)
|
|
{
|
|
int i_stat, o_stat;
|
|
|
|
o_stat = sx_read_channel_byte(port, hi_op);
|
|
i_stat = sx_read_channel_byte(port, hi_ip);
|
|
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) "
|
|
"%02x/%02x\n",
|
|
(o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0,
|
|
port->c_dcd, sx_get_CD(port),
|
|
sx_read_channel_byte(port, hi_ip),
|
|
sx_read_channel_byte(port, hi_state));
|
|
|
|
return (((o_stat & OP_DTR) ? TIOCM_DTR : 0) |
|
|
((o_stat & OP_RTS) ? TIOCM_RTS : 0) |
|
|
((i_stat & IP_CTS) ? TIOCM_CTS : 0) |
|
|
((i_stat & IP_DCD) ? TIOCM_CAR : 0) |
|
|
((i_stat & IP_DSR) ? TIOCM_DSR : 0) |
|
|
((i_stat & IP_RI) ? TIOCM_RNG : 0));
|
|
}
|
|
|
|
static void sx_set_baud(struct sx_port *port)
|
|
{
|
|
int t;
|
|
|
|
if (port->board->ta_type == MOD_SXDC) {
|
|
switch (port->gs.baud) {
|
|
/* Save some typing work... */
|
|
#define e(x) case x: t = BAUD_ ## x; break
|
|
e(50);
|
|
e(75);
|
|
e(110);
|
|
e(150);
|
|
e(200);
|
|
e(300);
|
|
e(600);
|
|
e(1200);
|
|
e(1800);
|
|
e(2000);
|
|
e(2400);
|
|
e(4800);
|
|
e(7200);
|
|
e(9600);
|
|
e(14400);
|
|
e(19200);
|
|
e(28800);
|
|
e(38400);
|
|
e(56000);
|
|
e(57600);
|
|
e(64000);
|
|
e(76800);
|
|
e(115200);
|
|
e(128000);
|
|
e(150000);
|
|
e(230400);
|
|
e(256000);
|
|
e(460800);
|
|
e(921600);
|
|
case 134:
|
|
t = BAUD_134_5;
|
|
break;
|
|
case 0:
|
|
t = -1;
|
|
break;
|
|
default:
|
|
/* Can I return "invalid"? */
|
|
t = BAUD_9600;
|
|
printk(KERN_INFO "sx: unsupported baud rate: %d.\n",
|
|
port->gs.baud);
|
|
break;
|
|
}
|
|
#undef e
|
|
if (t > 0) {
|
|
/* The baud rate is not set to 0, so we're enabeling DTR... -- REW */
|
|
sx_setsignals(port, 1, -1);
|
|
/* XXX This is not TA & MTA compatible */
|
|
sx_write_channel_byte(port, hi_csr, 0xff);
|
|
|
|
sx_write_channel_byte(port, hi_txbaud, t);
|
|
sx_write_channel_byte(port, hi_rxbaud, t);
|
|
} else {
|
|
sx_setsignals(port, 0, -1);
|
|
}
|
|
} else {
|
|
switch (port->gs.baud) {
|
|
#define e(x) case x: t = CSR_ ## x; break
|
|
e(75);
|
|
e(150);
|
|
e(300);
|
|
e(600);
|
|
e(1200);
|
|
e(2400);
|
|
e(4800);
|
|
e(1800);
|
|
e(9600);
|
|
e(19200);
|
|
e(57600);
|
|
e(38400);
|
|
/* TA supports 110, but not 115200, MTA supports 115200, but not 110 */
|
|
case 110:
|
|
if (port->board->ta_type == MOD_TA) {
|
|
t = CSR_110;
|
|
break;
|
|
} else {
|
|
t = CSR_9600;
|
|
printk(KERN_INFO "sx: Unsupported baud rate: "
|
|
"%d.\n", port->gs.baud);
|
|
break;
|
|
}
|
|
case 115200:
|
|
if (port->board->ta_type == MOD_TA) {
|
|
t = CSR_9600;
|
|
printk(KERN_INFO "sx: Unsupported baud rate: "
|
|
"%d.\n", port->gs.baud);
|
|
break;
|
|
} else {
|
|
t = CSR_110;
|
|
break;
|
|
}
|
|
case 0:
|
|
t = -1;
|
|
break;
|
|
default:
|
|
t = CSR_9600;
|
|
printk(KERN_INFO "sx: Unsupported baud rate: %d.\n",
|
|
port->gs.baud);
|
|
break;
|
|
}
|
|
#undef e
|
|
if (t >= 0) {
|
|
sx_setsignals(port, 1, -1);
|
|
sx_write_channel_byte(port, hi_csr, t * 0x11);
|
|
} else {
|
|
sx_setsignals(port, 0, -1);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Simon Allen's version of this routine was 225 lines long. 85 is a lot
|
|
better. -- REW */
|
|
|
|
static int sx_set_real_termios(void *ptr)
|
|
{
|
|
struct sx_port *port = ptr;
|
|
|
|
func_enter2();
|
|
|
|
if (!port->gs.tty)
|
|
return 0;
|
|
|
|
/* What is this doing here? -- REW
|
|
Ha! figured it out. It is to allow you to get DTR active again
|
|
if you've dropped it with stty 0. Moved to set_baud, where it
|
|
belongs (next to the drop dtr if baud == 0) -- REW */
|
|
/* sx_setsignals (port, 1, -1); */
|
|
|
|
sx_set_baud(port);
|
|
|
|
#define CFLAG port->gs.tty->termios->c_cflag
|
|
sx_write_channel_byte(port, hi_mr1,
|
|
(C_PARENB(port->gs.tty) ? MR1_WITH : MR1_NONE) |
|
|
(C_PARODD(port->gs.tty) ? MR1_ODD : MR1_EVEN) |
|
|
(C_CRTSCTS(port->gs.tty) ? MR1_RTS_RXFLOW : 0) |
|
|
(((CFLAG & CSIZE) == CS8) ? MR1_8_BITS : 0) |
|
|
(((CFLAG & CSIZE) == CS7) ? MR1_7_BITS : 0) |
|
|
(((CFLAG & CSIZE) == CS6) ? MR1_6_BITS : 0) |
|
|
(((CFLAG & CSIZE) == CS5) ? MR1_5_BITS : 0));
|
|
|
|
sx_write_channel_byte(port, hi_mr2,
|
|
(C_CRTSCTS(port->gs.tty) ? MR2_CTS_TXFLOW : 0) |
|
|
(C_CSTOPB(port->gs.tty) ? MR2_2_STOP :
|
|
MR2_1_STOP));
|
|
|
|
switch (CFLAG & CSIZE) {
|
|
case CS8:
|
|
sx_write_channel_byte(port, hi_mask, 0xff);
|
|
break;
|
|
case CS7:
|
|
sx_write_channel_byte(port, hi_mask, 0x7f);
|
|
break;
|
|
case CS6:
|
|
sx_write_channel_byte(port, hi_mask, 0x3f);
|
|
break;
|
|
case CS5:
|
|
sx_write_channel_byte(port, hi_mask, 0x1f);
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "sx: Invalid wordsize: %u\n", CFLAG & CSIZE);
|
|
break;
|
|
}
|
|
|
|
sx_write_channel_byte(port, hi_prtcl,
|
|
(I_IXON(port->gs.tty) ? SP_TXEN : 0) |
|
|
(I_IXOFF(port->gs.tty) ? SP_RXEN : 0) |
|
|
(I_IXANY(port->gs.tty) ? SP_TANY : 0) | SP_DCEN);
|
|
|
|
sx_write_channel_byte(port, hi_break,
|
|
(I_IGNBRK(port->gs.tty) ? BR_IGN : 0 |
|
|
I_BRKINT(port->gs.tty) ? BR_INT : 0));
|
|
|
|
sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.tty));
|
|
sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.tty));
|
|
sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.tty));
|
|
sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.tty));
|
|
|
|
sx_reconfigure_port(port);
|
|
|
|
/* Tell line discipline whether we will do input cooking */
|
|
if (I_OTHER(port->gs.tty)) {
|
|
clear_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
|
|
} else {
|
|
set_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
|
|
}
|
|
sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
|
|
port->gs.tty->termios->c_iflag, I_OTHER(port->gs.tty));
|
|
|
|
/* Tell line discipline whether we will do output cooking.
|
|
* If OPOST is set and no other output flags are set then we can do output
|
|
* processing. Even if only *one* other flag in the O_OTHER group is set
|
|
* we do cooking in software.
|
|
*/
|
|
if (O_OPOST(port->gs.tty) && !O_OTHER(port->gs.tty)) {
|
|
set_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
|
|
} else {
|
|
clear_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
|
|
}
|
|
sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
|
|
port->gs.tty->termios->c_oflag, O_OTHER(port->gs.tty));
|
|
/* port->c_dcd = sx_get_CD (port); */
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
|
|
/* ********************************************************************** *
|
|
* the interrupt related routines *
|
|
* ********************************************************************** */
|
|
|
|
/* Note:
|
|
Other drivers use the macro "MIN" to calculate how much to copy.
|
|
This has the disadvantage that it will evaluate parts twice. That's
|
|
expensive when it's IO (and the compiler cannot optimize those away!).
|
|
Moreover, I'm not sure that you're race-free.
|
|
|
|
I assign a value, and then only allow the value to decrease. This
|
|
is always safe. This makes the code a few lines longer, and you
|
|
know I'm dead against that, but I think it is required in this
|
|
case. */
|
|
|
|
static void sx_transmit_chars(struct sx_port *port)
|
|
{
|
|
int c;
|
|
int tx_ip;
|
|
int txroom;
|
|
|
|
func_enter2();
|
|
sx_dprintk(SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n",
|
|
port, port->gs.xmit_cnt);
|
|
|
|
if (test_and_set_bit(SX_PORT_TRANSMIT_LOCK, &port->locks)) {
|
|
return;
|
|
}
|
|
|
|
while (1) {
|
|
c = port->gs.xmit_cnt;
|
|
|
|
sx_dprintk(SX_DEBUG_TRANSMIT, "Copying %d ", c);
|
|
tx_ip = sx_read_channel_byte(port, hi_txipos);
|
|
|
|
/* Took me 5 minutes to deduce this formula.
|
|
Luckily it is literally in the manual in section 6.5.4.3.5 */
|
|
txroom = (sx_read_channel_byte(port, hi_txopos) - tx_ip - 1) &
|
|
0xff;
|
|
|
|
/* Don't copy more bytes than there is room for in the buffer */
|
|
if (c > txroom)
|
|
c = txroom;
|
|
sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom);
|
|
|
|
/* Don't copy past the end of the hardware transmit buffer */
|
|
if (c > 0x100 - tx_ip)
|
|
c = 0x100 - tx_ip;
|
|
|
|
sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100 - tx_ip);
|
|
|
|
/* Don't copy pas the end of the source buffer */
|
|
if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail)
|
|
c = SERIAL_XMIT_SIZE - port->gs.xmit_tail;
|
|
|
|
sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%ld) \n",
|
|
c, SERIAL_XMIT_SIZE - port->gs.xmit_tail);
|
|
|
|
/* If for one reason or another, we can't copy more data, we're
|
|
done! */
|
|
if (c == 0)
|
|
break;
|
|
|
|
memcpy_toio(port->board->base + CHAN_OFFSET(port, hi_txbuf) +
|
|
tx_ip, port->gs.xmit_buf + port->gs.xmit_tail, c);
|
|
|
|
/* Update the pointer in the card */
|
|
sx_write_channel_byte(port, hi_txipos, (tx_ip + c) & 0xff);
|
|
|
|
/* Update the kernel buffer end */
|
|
port->gs.xmit_tail = (port->gs.xmit_tail + c) &
|
|
(SERIAL_XMIT_SIZE - 1);
|
|
|
|
/* This one last. (this is essential)
|
|
It would allow others to start putting more data into the
|
|
buffer! */
|
|
port->gs.xmit_cnt -= c;
|
|
}
|
|
|
|
if (port->gs.xmit_cnt == 0) {
|
|
sx_disable_tx_interrupts(port);
|
|
}
|
|
|
|
if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
|
|
tty_wakeup(port->gs.tty);
|
|
sx_dprintk(SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n",
|
|
port->gs.wakeup_chars);
|
|
}
|
|
|
|
clear_bit(SX_PORT_TRANSMIT_LOCK, &port->locks);
|
|
func_exit();
|
|
}
|
|
|
|
/* Note the symmetry between receiving chars and transmitting them!
|
|
Note: The kernel should have implemented both a receive buffer and
|
|
a transmit buffer. */
|
|
|
|
/* Inlined: Called only once. Remove the inline when you add another call */
|
|
static inline void sx_receive_chars(struct sx_port *port)
|
|
{
|
|
int c;
|
|
int rx_op;
|
|
struct tty_struct *tty;
|
|
int copied = 0;
|
|
unsigned char *rp;
|
|
|
|
func_enter2();
|
|
tty = port->gs.tty;
|
|
while (1) {
|
|
rx_op = sx_read_channel_byte(port, hi_rxopos);
|
|
c = (sx_read_channel_byte(port, hi_rxipos) - rx_op) & 0xff;
|
|
|
|
sx_dprintk(SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
|
|
|
|
/* Don't copy past the end of the hardware receive buffer */
|
|
if (rx_op + c > 0x100)
|
|
c = 0x100 - rx_op;
|
|
|
|
sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c);
|
|
|
|
/* Don't copy more bytes than there is room for in the buffer */
|
|
|
|
c = tty_prepare_flip_string(tty, &rp, c);
|
|
|
|
sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c);
|
|
|
|
/* If for one reason or another, we can't copy more data, we're done! */
|
|
if (c == 0)
|
|
break;
|
|
|
|
sx_dprintk(SX_DEBUG_RECEIVE, "Copying over %d chars. First is "
|
|
"%d at %lx\n", c, read_sx_byte(port->board,
|
|
CHAN_OFFSET(port, hi_rxbuf) + rx_op),
|
|
CHAN_OFFSET(port, hi_rxbuf));
|
|
memcpy_fromio(rp, port->board->base +
|
|
CHAN_OFFSET(port, hi_rxbuf) + rx_op, c);
|
|
|
|
/* This one last. ( Not essential.)
|
|
It allows the card to start putting more data into the
|
|
buffer!
|
|
Update the pointer in the card */
|
|
sx_write_channel_byte(port, hi_rxopos, (rx_op + c) & 0xff);
|
|
|
|
copied += c;
|
|
}
|
|
if (copied) {
|
|
struct timeval tv;
|
|
|
|
do_gettimeofday(&tv);
|
|
sx_dprintk(SX_DEBUG_RECEIVE, "pushing flipq port %d (%3d "
|
|
"chars): %d.%06d (%d/%d)\n", port->line,
|
|
copied, (int)(tv.tv_sec % 60), (int)tv.tv_usec,
|
|
tty->raw, tty->real_raw);
|
|
|
|
/* Tell the rest of the system the news. Great news. New
|
|
characters! */
|
|
tty_flip_buffer_push(tty);
|
|
/* tty_schedule_flip (tty); */
|
|
}
|
|
|
|
func_exit();
|
|
}
|
|
|
|
/* Inlined: it is called only once. Remove the inline if you add another
|
|
call */
|
|
static inline void sx_check_modem_signals(struct sx_port *port)
|
|
{
|
|
int hi_state;
|
|
int c_dcd;
|
|
|
|
hi_state = sx_read_channel_byte(port, hi_state);
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n",
|
|
port->c_dcd, sx_get_CD(port));
|
|
|
|
if (hi_state & ST_BREAK) {
|
|
hi_state &= ~ST_BREAK;
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a break.\n");
|
|
sx_write_channel_byte(port, hi_state, hi_state);
|
|
gs_got_break(&port->gs);
|
|
}
|
|
if (hi_state & ST_DCD) {
|
|
hi_state &= ~ST_DCD;
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n");
|
|
sx_write_channel_byte(port, hi_state, hi_state);
|
|
c_dcd = sx_get_CD(port);
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd);
|
|
if (c_dcd != port->c_dcd) {
|
|
port->c_dcd = c_dcd;
|
|
if (sx_get_CD(port)) {
|
|
/* DCD went UP */
|
|
if ((sx_read_channel_byte(port, hi_hstat) !=
|
|
HS_IDLE_CLOSED) &&
|
|
!(port->gs.tty->termios->
|
|
c_cflag & CLOCAL)) {
|
|
/* Are we blocking in open? */
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
|
|
"active, unblocking open\n");
|
|
wake_up_interruptible(&port->gs.
|
|
open_wait);
|
|
} else {
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
|
|
"raised. Ignoring.\n");
|
|
}
|
|
} else {
|
|
/* DCD went down! */
|
|
if (!(port->gs.tty->termios->c_cflag & CLOCAL)){
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
|
|
"dropped. hanging up....\n");
|
|
tty_hangup(port->gs.tty);
|
|
} else {
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
|
|
"dropped. ignoring.\n");
|
|
}
|
|
}
|
|
} else {
|
|
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us "
|
|
"DCD changed, but it didn't.\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/* This is what an interrupt routine should look like.
|
|
* Small, elegant, clear.
|
|
*/
|
|
|
|
static irqreturn_t sx_interrupt(int irq, void *ptr)
|
|
{
|
|
struct sx_board *board = ptr;
|
|
struct sx_port *port;
|
|
int i;
|
|
|
|
func_enter();
|
|
sx_dprintk(SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq,
|
|
board->irq);
|
|
|
|
/* AAargh! The order in which to do these things is essential and
|
|
not trivial.
|
|
|
|
- Rate limit goes before "recursive". Otherwise a series of
|
|
recursive calls will hang the machine in the interrupt routine.
|
|
|
|
- hardware twiddling goes before "recursive". Otherwise when we
|
|
poll the card, and a recursive interrupt happens, we won't
|
|
ack the card, so it might keep on interrupting us. (especially
|
|
level sensitive interrupt systems like PCI).
|
|
|
|
- Rate limit goes before hardware twiddling. Otherwise we won't
|
|
catch a card that has gone bonkers.
|
|
|
|
- The "initialized" test goes after the hardware twiddling. Otherwise
|
|
the card will stick us in the interrupt routine again.
|
|
|
|
- The initialized test goes before recursive.
|
|
*/
|
|
|
|
#ifdef IRQ_RATE_LIMIT
|
|
/* Aaargh! I'm ashamed. This costs more lines-of-code than the
|
|
actual interrupt routine!. (Well, used to when I wrote that
|
|
comment) */
|
|
{
|
|
static int lastjif;
|
|
static int nintr = 0;
|
|
|
|
if (lastjif == jiffies) {
|
|
if (++nintr > IRQ_RATE_LIMIT) {
|
|
free_irq(board->irq, board);
|
|
printk(KERN_ERR "sx: Too many interrupts. "
|
|
"Turning off interrupt %d.\n",
|
|
board->irq);
|
|
}
|
|
} else {
|
|
lastjif = jiffies;
|
|
nintr = 0;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (board->irq == irq) {
|
|
/* Tell the card we've noticed the interrupt. */
|
|
|
|
sx_write_board_word(board, cc_int_pending, 0);
|
|
if (IS_SX_BOARD(board)) {
|
|
write_sx_byte(board, SX_RESET_IRQ, 1);
|
|
} else if (IS_EISA_BOARD(board)) {
|
|
inb(board->eisa_base + 0xc03);
|
|
write_sx_word(board, 8, 0);
|
|
} else {
|
|
write_sx_byte(board, SI2_ISA_INTCLEAR,
|
|
SI2_ISA_INTCLEAR_CLEAR);
|
|
write_sx_byte(board, SI2_ISA_INTCLEAR,
|
|
SI2_ISA_INTCLEAR_SET);
|
|
}
|
|
}
|
|
|
|
if (!sx_initialized)
|
|
return IRQ_HANDLED;
|
|
if (!(board->flags & SX_BOARD_INITIALIZED))
|
|
return IRQ_HANDLED;
|
|
|
|
if (test_and_set_bit(SX_BOARD_INTR_LOCK, &board->locks)) {
|
|
printk(KERN_ERR "Recursive interrupt! (%d)\n", board->irq);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
for (i = 0; i < board->nports; i++) {
|
|
port = &board->ports[i];
|
|
if (port->gs.flags & GS_ACTIVE) {
|
|
if (sx_read_channel_byte(port, hi_state)) {
|
|
sx_dprintk(SX_DEBUG_INTERRUPTS, "Port %d: "
|
|
"modem signal change?... \n",i);
|
|
sx_check_modem_signals(port);
|
|
}
|
|
if (port->gs.xmit_cnt) {
|
|
sx_transmit_chars(port);
|
|
}
|
|
if (!(port->gs.flags & SX_RX_THROTTLE)) {
|
|
sx_receive_chars(port);
|
|
}
|
|
}
|
|
}
|
|
|
|
clear_bit(SX_BOARD_INTR_LOCK, &board->locks);
|
|
|
|
sx_dprintk(SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq,
|
|
board->irq);
|
|
func_exit();
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sx_pollfunc(unsigned long data)
|
|
{
|
|
struct sx_board *board = (struct sx_board *)data;
|
|
|
|
func_enter();
|
|
|
|
sx_interrupt(0, board);
|
|
|
|
mod_timer(&board->timer, jiffies + sx_poll);
|
|
func_exit();
|
|
}
|
|
|
|
/* ********************************************************************** *
|
|
* Here are the routines that actually *
|
|
* interface with the generic_serial driver *
|
|
* ********************************************************************** */
|
|
|
|
/* Ehhm. I don't know how to fiddle with interrupts on the SX card. --REW */
|
|
/* Hmm. Ok I figured it out. You don't. */
|
|
|
|
static void sx_disable_tx_interrupts(void *ptr)
|
|
{
|
|
struct sx_port *port = ptr;
|
|
func_enter2();
|
|
|
|
port->gs.flags &= ~GS_TX_INTEN;
|
|
|
|
func_exit();
|
|
}
|
|
|
|
static void sx_enable_tx_interrupts(void *ptr)
|
|
{
|
|
struct sx_port *port = ptr;
|
|
int data_in_buffer;
|
|
func_enter2();
|
|
|
|
/* First transmit the characters that we're supposed to */
|
|
sx_transmit_chars(port);
|
|
|
|
/* The sx card will never interrupt us if we don't fill the buffer
|
|
past 25%. So we keep considering interrupts off if that's the case. */
|
|
data_in_buffer = (sx_read_channel_byte(port, hi_txipos) -
|
|
sx_read_channel_byte(port, hi_txopos)) & 0xff;
|
|
|
|
/* XXX Must be "HIGH_WATER" for SI card according to doc. */
|
|
if (data_in_buffer < LOW_WATER)
|
|
port->gs.flags &= ~GS_TX_INTEN;
|
|
|
|
func_exit();
|
|
}
|
|
|
|
static void sx_disable_rx_interrupts(void *ptr)
|
|
{
|
|
/* struct sx_port *port = ptr; */
|
|
func_enter();
|
|
|
|
func_exit();
|
|
}
|
|
|
|
static void sx_enable_rx_interrupts(void *ptr)
|
|
{
|
|
/* struct sx_port *port = ptr; */
|
|
func_enter();
|
|
|
|
func_exit();
|
|
}
|
|
|
|
/* Jeez. Isn't this simple? */
|
|
static int sx_get_CD(void *ptr)
|
|
{
|
|
struct sx_port *port = ptr;
|
|
func_enter2();
|
|
|
|
func_exit();
|
|
return ((sx_read_channel_byte(port, hi_ip) & IP_DCD) != 0);
|
|
}
|
|
|
|
/* Jeez. Isn't this simple? */
|
|
static int sx_chars_in_buffer(void *ptr)
|
|
{
|
|
struct sx_port *port = ptr;
|
|
func_enter2();
|
|
|
|
func_exit();
|
|
return ((sx_read_channel_byte(port, hi_txipos) -
|
|
sx_read_channel_byte(port, hi_txopos)) & 0xff);
|
|
}
|
|
|
|
static void sx_shutdown_port(void *ptr)
|
|
{
|
|
struct sx_port *port = ptr;
|
|
|
|
func_enter();
|
|
|
|
port->gs.flags &= ~GS_ACTIVE;
|
|
if (port->gs.tty && (port->gs.tty->termios->c_cflag & HUPCL)) {
|
|
sx_setsignals(port, 0, 0);
|
|
sx_reconfigure_port(port);
|
|
}
|
|
|
|
func_exit();
|
|
}
|
|
|
|
/* ********************************************************************** *
|
|
* Here are the routines that actually *
|
|
* interface with the rest of the system *
|
|
* ********************************************************************** */
|
|
|
|
static int sx_open(struct tty_struct *tty, struct file *filp)
|
|
{
|
|
struct sx_port *port;
|
|
int retval, line;
|
|
unsigned long flags;
|
|
|
|
func_enter();
|
|
|
|
if (!sx_initialized) {
|
|
return -EIO;
|
|
}
|
|
|
|
line = tty->index;
|
|
sx_dprintk(SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, "
|
|
"np=%d)\n", task_pid_nr(current), line, tty,
|
|
current->signal->tty, sx_nports);
|
|
|
|
if ((line < 0) || (line >= SX_NPORTS) || (line >= sx_nports))
|
|
return -ENODEV;
|
|
|
|
port = &sx_ports[line];
|
|
port->c_dcd = 0; /* Make sure that the first interrupt doesn't detect a
|
|
1 -> 0 transition. */
|
|
|
|
sx_dprintk(SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd);
|
|
|
|
spin_lock_irqsave(&port->gs.driver_lock, flags);
|
|
|
|
tty->driver_data = port;
|
|
port->gs.tty = tty;
|
|
port->gs.count++;
|
|
spin_unlock_irqrestore(&port->gs.driver_lock, flags);
|
|
|
|
sx_dprintk(SX_DEBUG_OPEN, "starting port\n");
|
|
|
|
/*
|
|
* Start up serial port
|
|
*/
|
|
retval = gs_init_port(&port->gs);
|
|
sx_dprintk(SX_DEBUG_OPEN, "done gs_init\n");
|
|
if (retval) {
|
|
port->gs.count--;
|
|
return retval;
|
|
}
|
|
|
|
port->gs.flags |= GS_ACTIVE;
|
|
if (port->gs.count <= 1)
|
|
sx_setsignals(port, 1, 1);
|
|
|
|
#if 0
|
|
if (sx_debug & SX_DEBUG_OPEN)
|
|
my_hd(port, sizeof(*port));
|
|
#else
|
|
if (sx_debug & SX_DEBUG_OPEN)
|
|
my_hd_io(port->board->base + port->ch_base, sizeof(*port));
|
|
#endif
|
|
|
|
if (port->gs.count <= 1) {
|
|
if (sx_send_command(port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) {
|
|
printk(KERN_ERR "sx: Card didn't respond to LOPEN "
|
|
"command.\n");
|
|
spin_lock_irqsave(&port->gs.driver_lock, flags);
|
|
port->gs.count--;
|
|
spin_unlock_irqrestore(&port->gs.driver_lock, flags);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
retval = gs_block_til_ready(port, filp);
|
|
sx_dprintk(SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n",
|
|
retval, port->gs.count);
|
|
|
|
if (retval) {
|
|
/*
|
|
* Don't lower gs.count here because sx_close() will be called later
|
|
*/
|
|
|
|
return retval;
|
|
}
|
|
/* tty->low_latency = 1; */
|
|
|
|
port->c_dcd = sx_get_CD(port);
|
|
sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd);
|
|
|
|
func_exit();
|
|
return 0;
|
|
|
|
}
|
|
|
|
static void sx_close(void *ptr)
|
|
{
|
|
struct sx_port *port = ptr;
|
|
/* Give the port 5 seconds to close down. */
|
|
int to = 5 * HZ;
|
|
|
|
func_enter();
|
|
|
|
sx_setsignals(port, 0, 0);
|
|
sx_reconfigure_port(port);
|
|
sx_send_command(port, HS_CLOSE, 0, 0);
|
|
|
|
while (to-- && (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED))
|
|
if (msleep_interruptible(10))
|
|
break;
|
|
if (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) {
|
|
if (sx_send_command(port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED)
|
|
!= 1) {
|
|
printk(KERN_ERR "sx: sent the force_close command, but "
|
|
"card didn't react\n");
|
|
} else
|
|
sx_dprintk(SX_DEBUG_CLOSE, "sent the force_close "
|
|
"command.\n");
|
|
}
|
|
|
|
sx_dprintk(SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n",
|
|
5 * HZ - to - 1, port->gs.count);
|
|
|
|
if (port->gs.count) {
|
|
sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n",
|
|
port->gs.count);
|
|
/*printk("%s SETTING port count to zero: %p count: %d\n",
|
|
__FUNCTION__, port, port->gs.count);
|
|
port->gs.count = 0;*/
|
|
}
|
|
|
|
func_exit();
|
|
}
|
|
|
|
/* This is relatively thorough. But then again it is only 20 lines. */
|
|
#define MARCHUP for (i = min; i < max; i++)
|
|
#define MARCHDOWN for (i = max - 1; i >= min; i--)
|
|
#define W0 write_sx_byte(board, i, 0x55)
|
|
#define W1 write_sx_byte(board, i, 0xaa)
|
|
#define R0 if (read_sx_byte(board, i) != 0x55) return 1
|
|
#define R1 if (read_sx_byte(board, i) != 0xaa) return 1
|
|
|
|
/* This memtest takes a human-noticable time. You normally only do it
|
|
once a boot, so I guess that it is worth it. */
|
|
static int do_memtest(struct sx_board *board, int min, int max)
|
|
{
|
|
int i;
|
|
|
|
/* This is a marchb. Theoretically, marchb catches much more than
|
|
simpler tests. In practise, the longer test just catches more
|
|
intermittent errors. -- REW
|
|
(For the theory behind memory testing see:
|
|
Testing Semiconductor Memories by A.J. van de Goor.) */
|
|
MARCHUP {
|
|
W0;
|
|
}
|
|
MARCHUP {
|
|
R0;
|
|
W1;
|
|
R1;
|
|
W0;
|
|
R0;
|
|
W1;
|
|
}
|
|
MARCHUP {
|
|
R1;
|
|
W0;
|
|
W1;
|
|
}
|
|
MARCHDOWN {
|
|
R1;
|
|
W0;
|
|
W1;
|
|
W0;
|
|
}
|
|
MARCHDOWN {
|
|
R0;
|
|
W1;
|
|
W0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#undef MARCHUP
|
|
#undef MARCHDOWN
|
|
#undef W0
|
|
#undef W1
|
|
#undef R0
|
|
#undef R1
|
|
|
|
#define MARCHUP for (i = min; i < max; i += 2)
|
|
#define MARCHDOWN for (i = max - 1; i >= min; i -= 2)
|
|
#define W0 write_sx_word(board, i, 0x55aa)
|
|
#define W1 write_sx_word(board, i, 0xaa55)
|
|
#define R0 if (read_sx_word(board, i) != 0x55aa) return 1
|
|
#define R1 if (read_sx_word(board, i) != 0xaa55) return 1
|
|
|
|
#if 0
|
|
/* This memtest takes a human-noticable time. You normally only do it
|
|
once a boot, so I guess that it is worth it. */
|
|
static int do_memtest_w(struct sx_board *board, int min, int max)
|
|
{
|
|
int i;
|
|
|
|
MARCHUP {
|
|
W0;
|
|
}
|
|
MARCHUP {
|
|
R0;
|
|
W1;
|
|
R1;
|
|
W0;
|
|
R0;
|
|
W1;
|
|
}
|
|
MARCHUP {
|
|
R1;
|
|
W0;
|
|
W1;
|
|
}
|
|
MARCHDOWN {
|
|
R1;
|
|
W0;
|
|
W1;
|
|
W0;
|
|
}
|
|
MARCHDOWN {
|
|
R0;
|
|
W1;
|
|
W0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int sx_fw_ioctl(struct inode *inode, struct file *filp,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
int rc = 0;
|
|
int __user *descr = (int __user *)arg;
|
|
int i;
|
|
static struct sx_board *board = NULL;
|
|
int nbytes, offset;
|
|
unsigned long data;
|
|
char *tmp;
|
|
|
|
func_enter();
|
|
|
|
#if 0
|
|
/* Removed superuser check: Sysops can use the permissions on the device
|
|
file to restrict access. Recommendation: Root only. (root.root 600) */
|
|
if (!capable(CAP_SYS_ADMIN)) {
|
|
return -EPERM;
|
|
}
|
|
#endif
|
|
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
|
|
|
|
if (!board)
|
|
board = &boards[0];
|
|
if (board->flags & SX_BOARD_PRESENT) {
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "Board present! (%x)\n",
|
|
board->flags);
|
|
} else {
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "Board not present! (%x) all:",
|
|
board->flags);
|
|
for (i = 0; i < SX_NBOARDS; i++)
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
|
|
return -EIO;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case SXIO_SET_BOARD:
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg);
|
|
if (arg >= SX_NBOARDS)
|
|
return -EIO;
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n");
|
|
if (!(boards[arg].flags & SX_BOARD_PRESENT))
|
|
return -EIO;
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n");
|
|
board = &boards[arg];
|
|
break;
|
|
case SXIO_GET_TYPE:
|
|
rc = -ENOENT; /* If we manage to miss one, return error. */
|
|
if (IS_SX_BOARD(board))
|
|
rc = SX_TYPE_SX;
|
|
if (IS_CF_BOARD(board))
|
|
rc = SX_TYPE_CF;
|
|
if (IS_SI_BOARD(board))
|
|
rc = SX_TYPE_SI;
|
|
if (IS_SI1_BOARD(board))
|
|
rc = SX_TYPE_SI;
|
|
if (IS_EISA_BOARD(board))
|
|
rc = SX_TYPE_SI;
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %d\n", rc);
|
|
break;
|
|
case SXIO_DO_RAMTEST:
|
|
if (sx_initialized) /* Already initialized: better not ramtest the board. */
|
|
return -EPERM;
|
|
if (IS_SX_BOARD(board)) {
|
|
rc = do_memtest(board, 0, 0x7000);
|
|
if (!rc)
|
|
rc = do_memtest(board, 0, 0x7000);
|
|
/*if (!rc) rc = do_memtest_w (board, 0, 0x7000); */
|
|
} else {
|
|
rc = do_memtest(board, 0, 0x7ff8);
|
|
/* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */
|
|
}
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "returning memtest result= %d\n",
|
|
rc);
|
|
break;
|
|
case SXIO_DOWNLOAD:
|
|
if (sx_initialized) /* Already initialized */
|
|
return -EEXIST;
|
|
if (!sx_reset(board))
|
|
return -EIO;
|
|
sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
|
|
|
|
tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER);
|
|
if (!tmp)
|
|
return -ENOMEM;
|
|
get_user(nbytes, descr++);
|
|
get_user(offset, descr++);
|
|
get_user(data, descr++);
|
|
while (nbytes && data) {
|
|
for (i = 0; i < nbytes; i += SX_CHUNK_SIZE) {
|
|
if (copy_from_user(tmp, (char __user *)data + i,
|
|
(i + SX_CHUNK_SIZE > nbytes) ?
|
|
nbytes - i : SX_CHUNK_SIZE)) {
|
|
kfree(tmp);
|
|
return -EFAULT;
|
|
}
|
|
memcpy_toio(board->base2 + offset + i, tmp,
|
|
(i + SX_CHUNK_SIZE > nbytes) ?
|
|
nbytes - i : SX_CHUNK_SIZE);
|
|
}
|
|
|
|
get_user(nbytes, descr++);
|
|
get_user(offset, descr++);
|
|
get_user(data, descr++);
|
|
}
|
|
kfree(tmp);
|
|
sx_nports += sx_init_board(board);
|
|
rc = sx_nports;
|
|
break;
|
|
case SXIO_INIT:
|
|
if (sx_initialized) /* Already initialized */
|
|
return -EEXIST;
|
|
/* This is not allowed until all boards are initialized... */
|
|
for (i = 0; i < SX_NBOARDS; i++) {
|
|
if ((boards[i].flags & SX_BOARD_PRESENT) &&
|
|
!(boards[i].flags & SX_BOARD_INITIALIZED))
|
|
return -EIO;
|
|
}
|
|
for (i = 0; i < SX_NBOARDS; i++)
|
|
if (!(boards[i].flags & SX_BOARD_PRESENT))
|
|
break;
|
|
|
|
sx_dprintk(SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, "
|
|
"%d channels, first board: %d ports\n",
|
|
i, sx_nports, boards[0].nports);
|
|
rc = sx_init_portstructs(i, sx_nports);
|
|
sx_init_drivers();
|
|
if (rc >= 0)
|
|
sx_initialized++;
|
|
break;
|
|
case SXIO_SETDEBUG:
|
|
sx_debug = arg;
|
|
break;
|
|
case SXIO_GETDEBUG:
|
|
rc = sx_debug;
|
|
break;
|
|
case SXIO_GETGSDEBUG:
|
|
case SXIO_SETGSDEBUG:
|
|
rc = -EINVAL;
|
|
break;
|
|
case SXIO_GETNPORTS:
|
|
rc = sx_nports;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "Unknown ioctl on firmware device (%x).\n",
|
|
cmd);
|
|
break;
|
|
}
|
|
func_exit();
|
|
return rc;
|
|
}
|
|
|
|
static void sx_break(struct tty_struct *tty, int flag)
|
|
{
|
|
struct sx_port *port = tty->driver_data;
|
|
int rv;
|
|
|
|
func_enter();
|
|
|
|
if (flag)
|
|
rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK);
|
|
else
|
|
rv = sx_send_command(port, HS_STOP, -1, HS_IDLE_OPEN);
|
|
if (rv != 1)
|
|
printk(KERN_ERR "sx: couldn't send break (%x).\n",
|
|
read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat)));
|
|
|
|
func_exit();
|
|
}
|
|
|
|
static int sx_tiocmget(struct tty_struct *tty, struct file *file)
|
|
{
|
|
struct sx_port *port = tty->driver_data;
|
|
return sx_getsignals(port);
|
|
}
|
|
|
|
static int sx_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct sx_port *port = tty->driver_data;
|
|
int rts = -1, dtr = -1;
|
|
|
|
if (set & TIOCM_RTS)
|
|
rts = 1;
|
|
if (set & TIOCM_DTR)
|
|
dtr = 1;
|
|
if (clear & TIOCM_RTS)
|
|
rts = 0;
|
|
if (clear & TIOCM_DTR)
|
|
dtr = 0;
|
|
|
|
sx_setsignals(port, dtr, rts);
|
|
sx_reconfigure_port(port);
|
|
return 0;
|
|
}
|
|
|
|
static int sx_ioctl(struct tty_struct *tty, struct file *filp,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
int rc;
|
|
struct sx_port *port = tty->driver_data;
|
|
void __user *argp = (void __user *)arg;
|
|
int ival;
|
|
|
|
/* func_enter2(); */
|
|
|
|
rc = 0;
|
|
switch (cmd) {
|
|
case TIOCGSOFTCAR:
|
|
rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
|
|
(unsigned __user *)argp);
|
|
break;
|
|
case TIOCSSOFTCAR:
|
|
if ((rc = get_user(ival, (unsigned __user *)argp)) == 0) {
|
|
tty->termios->c_cflag =
|
|
(tty->termios->c_cflag & ~CLOCAL) |
|
|
(ival ? CLOCAL : 0);
|
|
}
|
|
break;
|
|
case TIOCGSERIAL:
|
|
rc = gs_getserial(&port->gs, argp);
|
|
break;
|
|
case TIOCSSERIAL:
|
|
rc = gs_setserial(&port->gs, argp);
|
|
break;
|
|
default:
|
|
rc = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
/* func_exit(); */
|
|
return rc;
|
|
}
|
|
|
|
/* The throttle/unthrottle scheme for the Specialix card is different
|
|
* from other drivers and deserves some explanation.
|
|
* The Specialix hardware takes care of XON/XOFF
|
|
* and CTS/RTS flow control itself. This means that all we have to
|
|
* do when signalled by the upper tty layer to throttle/unthrottle is
|
|
* to make a note of it here. When we come to read characters from the
|
|
* rx buffers on the card (sx_receive_chars()) we look to see if the
|
|
* upper layer can accept more (as noted here in sx_rx_throt[]).
|
|
* If it can't we simply don't remove chars from the cards buffer.
|
|
* When the tty layer can accept chars, we again note that here and when
|
|
* sx_receive_chars() is called it will remove them from the cards buffer.
|
|
* The card will notice that a ports buffer has drained below some low
|
|
* water mark and will unflow control the line itself, using whatever
|
|
* flow control scheme is in use for that port. -- Simon Allen
|
|
*/
|
|
|
|
static void sx_throttle(struct tty_struct *tty)
|
|
{
|
|
struct sx_port *port = (struct sx_port *)tty->driver_data;
|
|
|
|
func_enter2();
|
|
/* If the port is using any type of input flow
|
|
* control then throttle the port.
|
|
*/
|
|
if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) {
|
|
port->gs.flags |= SX_RX_THROTTLE;
|
|
}
|
|
func_exit();
|
|
}
|
|
|
|
static void sx_unthrottle(struct tty_struct *tty)
|
|
{
|
|
struct sx_port *port = (struct sx_port *)tty->driver_data;
|
|
|
|
func_enter2();
|
|
/* Always unthrottle even if flow control is not enabled on
|
|
* this port in case we disabled flow control while the port
|
|
* was throttled
|
|
*/
|
|
port->gs.flags &= ~SX_RX_THROTTLE;
|
|
func_exit();
|
|
return;
|
|
}
|
|
|
|
/* ********************************************************************** *
|
|
* Here are the initialization routines. *
|
|
* ********************************************************************** */
|
|
|
|
static int sx_init_board(struct sx_board *board)
|
|
{
|
|
int addr;
|
|
int chans;
|
|
int type;
|
|
|
|
func_enter();
|
|
|
|
/* This is preceded by downloading the download code. */
|
|
|
|
board->flags |= SX_BOARD_INITIALIZED;
|
|
|
|
if (read_sx_byte(board, 0))
|
|
/* CF boards may need this. */
|
|
write_sx_byte(board, 0, 0);
|
|
|
|
/* This resets the processor again, to make sure it didn't do any
|
|
foolish things while we were downloading the image */
|
|
if (!sx_reset(board))
|
|
return 0;
|
|
|
|
sx_start_board(board);
|
|
udelay(10);
|
|
if (!sx_busy_wait_neq(board, 0, 0xff, 0)) {
|
|
printk(KERN_ERR "sx: Ooops. Board won't initialize.\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Ok. So now the processor on the card is running. It gathered
|
|
some info for us... */
|
|
sx_dprintk(SX_DEBUG_INIT, "The sxcard structure:\n");
|
|
if (sx_debug & SX_DEBUG_INIT)
|
|
my_hd_io(board->base, 0x10);
|
|
sx_dprintk(SX_DEBUG_INIT, "the first sx_module structure:\n");
|
|
if (sx_debug & SX_DEBUG_INIT)
|
|
my_hd_io(board->base + 0x80, 0x30);
|
|
|
|
sx_dprintk(SX_DEBUG_INIT, "init_status: %x, %dk memory, firmware "
|
|
"V%x.%02x,\n",
|
|
read_sx_byte(board, 0), read_sx_byte(board, 1),
|
|
read_sx_byte(board, 5), read_sx_byte(board, 4));
|
|
|
|
if (read_sx_byte(board, 0) == 0xff) {
|
|
printk(KERN_INFO "sx: No modules found. Sorry.\n");
|
|
board->nports = 0;
|
|
return 0;
|
|
}
|
|
|
|
chans = 0;
|
|
|
|
if (IS_SX_BOARD(board)) {
|
|
sx_write_board_word(board, cc_int_count, sx_maxints);
|
|
} else {
|
|
if (sx_maxints)
|
|
sx_write_board_word(board, cc_int_count,
|
|
SI_PROCESSOR_CLOCK / 8 / sx_maxints);
|
|
}
|
|
|
|
/* grab the first module type... */
|
|
/* board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */
|
|
board->ta_type = mod_compat_type(sx_read_module_byte(board, 0x80,
|
|
mc_chip));
|
|
|
|
/* XXX byteorder */
|
|
for (addr = 0x80; addr != 0; addr = read_sx_word(board, addr) & 0x7fff){
|
|
type = sx_read_module_byte(board, addr, mc_chip);
|
|
sx_dprintk(SX_DEBUG_INIT, "Module at %x: %d channels\n",
|
|
addr, read_sx_byte(board, addr + 2));
|
|
|
|
chans += sx_read_module_byte(board, addr, mc_type);
|
|
|
|
sx_dprintk(SX_DEBUG_INIT, "module is an %s, which has %s/%s "
|
|
"panels\n",
|
|
mod_type_s(type),
|
|
pan_type_s(sx_read_module_byte(board, addr,
|
|
mc_mods) & 0xf),
|
|
pan_type_s(sx_read_module_byte(board, addr,
|
|
mc_mods) >> 4));
|
|
|
|
sx_dprintk(SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC "
|
|
"version: %x\n",
|
|
sx_read_module_byte(board, addr, mc_rev1),
|
|
sx_read_module_byte(board, addr, mc_rev2),
|
|
sx_read_module_byte(board, addr, mc_mtaasic_rev));
|
|
|
|
/* The following combinations are illegal: It should theoretically
|
|
work, but timing problems make the bus HANG. */
|
|
|
|
if (mod_compat_type(type) != board->ta_type) {
|
|
printk(KERN_ERR "sx: This is an invalid "
|
|
"configuration.\nDon't mix TA/MTA/SXDC on the "
|
|
"same hostadapter.\n");
|
|
chans = 0;
|
|
break;
|
|
}
|
|
if ((IS_EISA_BOARD(board) ||
|
|
IS_SI_BOARD(board)) &&
|
|
(mod_compat_type(type) == 4)) {
|
|
printk(KERN_ERR "sx: This is an invalid "
|
|
"configuration.\nDon't use SXDCs on an SI/XIO "
|
|
"adapter.\n");
|
|
chans = 0;
|
|
break;
|
|
}
|
|
#if 0 /* Problem fixed: firmware 3.05 */
|
|
if (IS_SX_BOARD(board) && (type == TA8)) {
|
|
/* There are some issues with the firmware and the DCD/RTS
|
|
lines. It might work if you tie them together or something.
|
|
It might also work if you get a newer sx_firmware. Therefore
|
|
this is just a warning. */
|
|
printk(KERN_WARNING
|
|
"sx: The SX host doesn't work too well "
|
|
"with the TA8 adapters.\nSpecialix is working on it.\n");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
if (chans) {
|
|
if (board->irq > 0) {
|
|
/* fixed irq, probably PCI */
|
|
if (sx_irqmask & (1 << board->irq)) { /* may we use this irq? */
|
|
if (request_irq(board->irq, sx_interrupt,
|
|
IRQF_SHARED | IRQF_DISABLED,
|
|
"sx", board)) {
|
|
printk(KERN_ERR "sx: Cannot allocate "
|
|
"irq %d.\n", board->irq);
|
|
board->irq = 0;
|
|
}
|
|
} else
|
|
board->irq = 0;
|
|
} else if (board->irq < 0 && sx_irqmask) {
|
|
/* auto-allocate irq */
|
|
int irqnr;
|
|
int irqmask = sx_irqmask & (IS_SX_BOARD(board) ?
|
|
SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK);
|
|
for (irqnr = 15; irqnr > 0; irqnr--)
|
|
if (irqmask & (1 << irqnr))
|
|
if (!request_irq(irqnr, sx_interrupt,
|
|
IRQF_SHARED | IRQF_DISABLED,
|
|
"sx", board))
|
|
break;
|
|
if (!irqnr)
|
|
printk(KERN_ERR "sx: Cannot allocate IRQ.\n");
|
|
board->irq = irqnr;
|
|
} else
|
|
board->irq = 0;
|
|
|
|
if (board->irq) {
|
|
/* Found a valid interrupt, start up interrupts! */
|
|
sx_dprintk(SX_DEBUG_INIT, "Using irq %d.\n",
|
|
board->irq);
|
|
sx_start_interrupts(board);
|
|
board->poll = sx_slowpoll;
|
|
board->flags |= SX_IRQ_ALLOCATED;
|
|
} else {
|
|
/* no irq: setup board for polled operation */
|
|
board->poll = sx_poll;
|
|
sx_dprintk(SX_DEBUG_INIT, "Using poll-interval %d.\n",
|
|
board->poll);
|
|
}
|
|
|
|
/* The timer should be initialized anyway: That way we can
|
|
safely del_timer it when the module is unloaded. */
|
|
setup_timer(&board->timer, sx_pollfunc, (unsigned long)board);
|
|
|
|
if (board->poll)
|
|
mod_timer(&board->timer, jiffies + board->poll);
|
|
} else {
|
|
board->irq = 0;
|
|
}
|
|
|
|
board->nports = chans;
|
|
sx_dprintk(SX_DEBUG_INIT, "returning %d ports.", board->nports);
|
|
|
|
func_exit();
|
|
return chans;
|
|
}
|
|
|
|
static void __devinit printheader(void)
|
|
{
|
|
static int header_printed;
|
|
|
|
if (!header_printed) {
|
|
printk(KERN_INFO "Specialix SX driver "
|
|
"(C) 1998/1999 R.E.Wolff@BitWizard.nl\n");
|
|
printk(KERN_INFO "sx: version " __stringify(SX_VERSION) "\n");
|
|
header_printed = 1;
|
|
}
|
|
}
|
|
|
|
static int __devinit probe_sx(struct sx_board *board)
|
|
{
|
|
struct vpd_prom vpdp;
|
|
char *p;
|
|
int i;
|
|
|
|
func_enter();
|
|
|
|
if (!IS_CF_BOARD(board)) {
|
|
sx_dprintk(SX_DEBUG_PROBE, "Going to verify vpd prom at %p.\n",
|
|
board->base + SX_VPD_ROM);
|
|
|
|
if (sx_debug & SX_DEBUG_PROBE)
|
|
my_hd_io(board->base + SX_VPD_ROM, 0x40);
|
|
|
|
p = (char *)&vpdp;
|
|
for (i = 0; i < sizeof(struct vpd_prom); i++)
|
|
*p++ = read_sx_byte(board, SX_VPD_ROM + i * 2);
|
|
|
|
if (sx_debug & SX_DEBUG_PROBE)
|
|
my_hd(&vpdp, 0x20);
|
|
|
|
sx_dprintk(SX_DEBUG_PROBE, "checking identifier...\n");
|
|
|
|
if (strncmp(vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) {
|
|
sx_dprintk(SX_DEBUG_PROBE, "Got non-SX identifier: "
|
|
"'%s'\n", vpdp.identifier);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
printheader();
|
|
|
|
if (!IS_CF_BOARD(board)) {
|
|
printk(KERN_DEBUG "sx: Found an SX board at %lx\n",
|
|
board->hw_base);
|
|
printk(KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, "
|
|
"uniq ID:%08x, ",
|
|
vpdp.hwrev, vpdp.hwass, vpdp.uniqid);
|
|
printk("Manufactured: %d/%d\n", 1970 + vpdp.myear, vpdp.mweek);
|
|
|
|
if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) !=
|
|
SX_PCI_UNIQUEID1) && (((vpdp.uniqid >> 24) &
|
|
SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) {
|
|
/* This might be a bit harsh. This was the primary
|
|
reason the SX/ISA card didn't work at first... */
|
|
printk(KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA "
|
|
"card. Sorry: giving up.\n");
|
|
return (0);
|
|
}
|
|
|
|
if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) ==
|
|
SX_ISA_UNIQUEID1) {
|
|
if (((unsigned long)board->hw_base) & 0x8000) {
|
|
printk(KERN_WARNING "sx: Warning: There may be "
|
|
"hardware problems with the card at "
|
|
"%lx.\n", board->hw_base);
|
|
printk(KERN_WARNING "sx: Read sx.txt for more "
|
|
"info.\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
board->nports = -1;
|
|
|
|
/* This resets the processor, and keeps it off the bus. */
|
|
if (!sx_reset(board))
|
|
return 0;
|
|
sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
|
|
|
|
func_exit();
|
|
return 1;
|
|
}
|
|
|
|
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
|
|
|
|
/* Specialix probes for this card at 32k increments from 640k to 16M.
|
|
I consider machines with less than 16M unlikely nowadays, so I'm
|
|
not probing above 1Mb. Also, 0xa0000, 0xb0000, are taken by the VGA
|
|
card. 0xe0000 and 0xf0000 are taken by the BIOS. That only leaves
|
|
0xc0000, 0xc8000, 0xd0000 and 0xd8000 . */
|
|
|
|
static int __devinit probe_si(struct sx_board *board)
|
|
{
|
|
int i;
|
|
|
|
func_enter();
|
|
sx_dprintk(SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at "
|
|
"%p.\n", board->hw_base, board->base + SI2_ISA_ID_BASE);
|
|
|
|
if (sx_debug & SX_DEBUG_PROBE)
|
|
my_hd_io(board->base + SI2_ISA_ID_BASE, 0x8);
|
|
|
|
if (!IS_EISA_BOARD(board)) {
|
|
if (IS_SI1_BOARD(board)) {
|
|
for (i = 0; i < 8; i++) {
|
|
write_sx_byte(board, SI2_ISA_ID_BASE + 7 - i,i);
|
|
}
|
|
}
|
|
for (i = 0; i < 8; i++) {
|
|
if ((read_sx_byte(board, SI2_ISA_ID_BASE + 7 - i) & 7)
|
|
!= i) {
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Now we're pretty much convinced that there is an SI board here,
|
|
but to prevent trouble, we'd better double check that we don't
|
|
have an SI1 board when we're probing for an SI2 board.... */
|
|
|
|
write_sx_byte(board, SI2_ISA_ID_BASE, 0x10);
|
|
if (IS_SI1_BOARD(board)) {
|
|
/* This should be an SI1 board, which has this
|
|
location writable... */
|
|
if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) {
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
} else {
|
|
/* This should be an SI2 board, which has the bottom
|
|
3 bits non-writable... */
|
|
if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) {
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Now we're pretty much convinced that there is an SI board here,
|
|
but to prevent trouble, we'd better double check that we don't
|
|
have an SI1 board when we're probing for an SI2 board.... */
|
|
|
|
write_sx_byte(board, SI2_ISA_ID_BASE, 0x10);
|
|
if (IS_SI1_BOARD(board)) {
|
|
/* This should be an SI1 board, which has this
|
|
location writable... */
|
|
if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) {
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
} else {
|
|
/* This should be an SI2 board, which has the bottom
|
|
3 bits non-writable... */
|
|
if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) {
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
printheader();
|
|
|
|
printk(KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base);
|
|
/* Compared to the SX boards, it is a complete guess as to what
|
|
this card is up to... */
|
|
|
|
board->nports = -1;
|
|
|
|
/* This resets the processor, and keeps it off the bus. */
|
|
if (!sx_reset(board))
|
|
return 0;
|
|
sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
|
|
|
|
func_exit();
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
static const struct tty_operations sx_ops = {
|
|
.break_ctl = sx_break,
|
|
.open = sx_open,
|
|
.close = gs_close,
|
|
.write = gs_write,
|
|
.put_char = gs_put_char,
|
|
.flush_chars = gs_flush_chars,
|
|
.write_room = gs_write_room,
|
|
.chars_in_buffer = gs_chars_in_buffer,
|
|
.flush_buffer = gs_flush_buffer,
|
|
.ioctl = sx_ioctl,
|
|
.throttle = sx_throttle,
|
|
.unthrottle = sx_unthrottle,
|
|
.set_termios = gs_set_termios,
|
|
.stop = gs_stop,
|
|
.start = gs_start,
|
|
.hangup = gs_hangup,
|
|
.tiocmget = sx_tiocmget,
|
|
.tiocmset = sx_tiocmset,
|
|
};
|
|
|
|
static int sx_init_drivers(void)
|
|
{
|
|
int error;
|
|
|
|
func_enter();
|
|
|
|
sx_driver = alloc_tty_driver(sx_nports);
|
|
if (!sx_driver)
|
|
return 1;
|
|
sx_driver->owner = THIS_MODULE;
|
|
sx_driver->driver_name = "specialix_sx";
|
|
sx_driver->name = "ttyX";
|
|
sx_driver->major = SX_NORMAL_MAJOR;
|
|
sx_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
|
sx_driver->subtype = SERIAL_TYPE_NORMAL;
|
|
sx_driver->init_termios = tty_std_termios;
|
|
sx_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
|
|
sx_driver->init_termios.c_ispeed = 9600;
|
|
sx_driver->init_termios.c_ospeed = 9600;
|
|
sx_driver->flags = TTY_DRIVER_REAL_RAW;
|
|
tty_set_operations(sx_driver, &sx_ops);
|
|
|
|
if ((error = tty_register_driver(sx_driver))) {
|
|
put_tty_driver(sx_driver);
|
|
printk(KERN_ERR "sx: Couldn't register sx driver, error = %d\n",
|
|
error);
|
|
return 1;
|
|
}
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
|
|
static int sx_init_portstructs(int nboards, int nports)
|
|
{
|
|
struct sx_board *board;
|
|
struct sx_port *port;
|
|
int i, j;
|
|
int addr, chans;
|
|
int portno;
|
|
|
|
func_enter();
|
|
|
|
/* Many drivers statically allocate the maximum number of ports
|
|
There is no reason not to allocate them dynamically.
|
|
Is there? -- REW */
|
|
sx_ports = kcalloc(nports, sizeof(struct sx_port), GFP_KERNEL);
|
|
if (!sx_ports)
|
|
return -ENOMEM;
|
|
|
|
port = sx_ports;
|
|
for (i = 0; i < nboards; i++) {
|
|
board = &boards[i];
|
|
board->ports = port;
|
|
for (j = 0; j < boards[i].nports; j++) {
|
|
sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j);
|
|
port->gs.magic = SX_MAGIC;
|
|
port->gs.close_delay = HZ / 2;
|
|
port->gs.closing_wait = 30 * HZ;
|
|
port->board = board;
|
|
port->gs.rd = &sx_real_driver;
|
|
#ifdef NEW_WRITE_LOCKING
|
|
port->gs.port_write_mutex = MUTEX;
|
|
#endif
|
|
spin_lock_init(&port->gs.driver_lock);
|
|
/*
|
|
* Initializing wait queue
|
|
*/
|
|
init_waitqueue_head(&port->gs.open_wait);
|
|
init_waitqueue_head(&port->gs.close_wait);
|
|
|
|
port++;
|
|
}
|
|
}
|
|
|
|
port = sx_ports;
|
|
portno = 0;
|
|
for (i = 0; i < nboards; i++) {
|
|
board = &boards[i];
|
|
board->port_base = portno;
|
|
/* Possibly the configuration was rejected. */
|
|
sx_dprintk(SX_DEBUG_PROBE, "Board has %d channels\n",
|
|
board->nports);
|
|
if (board->nports <= 0)
|
|
continue;
|
|
/* XXX byteorder ?? */
|
|
for (addr = 0x80; addr != 0;
|
|
addr = read_sx_word(board, addr) & 0x7fff) {
|
|
chans = sx_read_module_byte(board, addr, mc_type);
|
|
sx_dprintk(SX_DEBUG_PROBE, "Module at %x: %d "
|
|
"channels\n", addr, chans);
|
|
sx_dprintk(SX_DEBUG_PROBE, "Port at");
|
|
for (j = 0; j < chans; j++) {
|
|
/* The "sx-way" is the way it SHOULD be done.
|
|
That way in the future, the firmware may for
|
|
example pack the structures a bit more
|
|
efficient. Neil tells me it isn't going to
|
|
happen anytime soon though. */
|
|
if (IS_SX_BOARD(board))
|
|
port->ch_base = sx_read_module_word(
|
|
board, addr + j * 2,
|
|
mc_chan_pointer);
|
|
else
|
|
port->ch_base = addr + 0x100 + 0x300 *j;
|
|
|
|
sx_dprintk(SX_DEBUG_PROBE, " %x",
|
|
port->ch_base);
|
|
port->line = portno++;
|
|
port++;
|
|
}
|
|
sx_dprintk(SX_DEBUG_PROBE, "\n");
|
|
}
|
|
/* This has to be done earlier. */
|
|
/* board->flags |= SX_BOARD_INITIALIZED; */
|
|
}
|
|
|
|
func_exit();
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int sx_find_free_board(void)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < SX_NBOARDS; i++)
|
|
if (!(boards[i].flags & SX_BOARD_PRESENT))
|
|
break;
|
|
|
|
return i;
|
|
}
|
|
|
|
static void __exit sx_release_drivers(void)
|
|
{
|
|
func_enter();
|
|
tty_unregister_driver(sx_driver);
|
|
put_tty_driver(sx_driver);
|
|
func_exit();
|
|
}
|
|
|
|
static void __devexit sx_remove_card(struct sx_board *board,
|
|
struct pci_dev *pdev)
|
|
{
|
|
if (board->flags & SX_BOARD_INITIALIZED) {
|
|
/* The board should stop messing with us. (actually I mean the
|
|
interrupt) */
|
|
sx_reset(board);
|
|
if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED))
|
|
free_irq(board->irq, board);
|
|
|
|
/* It is safe/allowed to del_timer a non-active timer */
|
|
del_timer(&board->timer);
|
|
if (pdev) {
|
|
#ifdef CONFIG_PCI
|
|
pci_iounmap(pdev, board->base);
|
|
pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2);
|
|
#endif
|
|
} else {
|
|
iounmap(board->base);
|
|
release_region(board->hw_base, board->hw_len);
|
|
}
|
|
|
|
board->flags &= ~(SX_BOARD_INITIALIZED | SX_BOARD_PRESENT);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_EISA
|
|
|
|
static int __devinit sx_eisa_probe(struct device *dev)
|
|
{
|
|
struct eisa_device *edev = to_eisa_device(dev);
|
|
struct sx_board *board;
|
|
unsigned long eisa_slot = edev->base_addr;
|
|
unsigned int i;
|
|
int retval = -EIO;
|
|
|
|
mutex_lock(&sx_boards_lock);
|
|
i = sx_find_free_board();
|
|
if (i == SX_NBOARDS) {
|
|
mutex_unlock(&sx_boards_lock);
|
|
goto err;
|
|
}
|
|
board = &boards[i];
|
|
board->flags |= SX_BOARD_PRESENT;
|
|
mutex_unlock(&sx_boards_lock);
|
|
|
|
dev_info(dev, "XIO : Signature found in EISA slot %lu, "
|
|
"Product %d Rev %d (REPORT THIS TO LKLM)\n",
|
|
eisa_slot >> 12,
|
|
inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 2),
|
|
inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 3));
|
|
|
|
board->eisa_base = eisa_slot;
|
|
board->flags &= ~SX_BOARD_TYPE;
|
|
board->flags |= SI_EISA_BOARD;
|
|
|
|
board->hw_base = ((inb(eisa_slot + 0xc01) << 8) +
|
|
inb(eisa_slot + 0xc00)) << 16;
|
|
board->hw_len = SI2_EISA_WINDOW_LEN;
|
|
if (!request_region(board->hw_base, board->hw_len, "sx")) {
|
|
dev_err(dev, "can't request region\n");
|
|
goto err_flag;
|
|
}
|
|
board->base2 =
|
|
board->base = ioremap(board->hw_base, SI2_EISA_WINDOW_LEN);
|
|
if (!board->base) {
|
|
dev_err(dev, "can't remap memory\n");
|
|
goto err_reg;
|
|
}
|
|
|
|
sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base);
|
|
sx_dprintk(SX_DEBUG_PROBE, "base: %p\n", board->base);
|
|
board->irq = inb(eisa_slot + 0xc02) >> 4;
|
|
sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq);
|
|
|
|
if (!probe_si(board))
|
|
goto err_unmap;
|
|
|
|
dev_set_drvdata(dev, board);
|
|
|
|
return 0;
|
|
err_unmap:
|
|
iounmap(board->base);
|
|
err_reg:
|
|
release_region(board->hw_base, board->hw_len);
|
|
err_flag:
|
|
board->flags &= ~SX_BOARD_PRESENT;
|
|
err:
|
|
return retval;
|
|
}
|
|
|
|
static int __devexit sx_eisa_remove(struct device *dev)
|
|
{
|
|
struct sx_board *board = dev_get_drvdata(dev);
|
|
|
|
sx_remove_card(board, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct eisa_device_id sx_eisa_tbl[] = {
|
|
{ "SLX" },
|
|
{ "" }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(eisa, sx_eisa_tbl);
|
|
|
|
static struct eisa_driver sx_eisadriver = {
|
|
.id_table = sx_eisa_tbl,
|
|
.driver = {
|
|
.name = "sx",
|
|
.probe = sx_eisa_probe,
|
|
.remove = __devexit_p(sx_eisa_remove),
|
|
}
|
|
};
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
/********************************************************
|
|
* Setting bit 17 in the CNTRL register of the PLX 9050 *
|
|
* chip forces a retry on writes while a read is pending.*
|
|
* This is to prevent the card locking up on Intel Xeon *
|
|
* multiprocessor systems with the NX chipset. -- NV *
|
|
********************************************************/
|
|
|
|
/* Newer cards are produced with this bit set from the configuration
|
|
EEprom. As the bit is read/write for the CPU, we can fix it here,
|
|
if we detect that it isn't set correctly. -- REW */
|
|
|
|
static void __devinit fix_sx_pci(struct pci_dev *pdev, struct sx_board *board)
|
|
{
|
|
unsigned int hwbase;
|
|
void __iomem *rebase;
|
|
unsigned int t;
|
|
|
|
#define CNTRL_REG_OFFSET 0x50
|
|
#define CNTRL_REG_GOODVALUE 0x18260000
|
|
|
|
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase);
|
|
hwbase &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
rebase = ioremap(hwbase, 0x80);
|
|
t = readl(rebase + CNTRL_REG_OFFSET);
|
|
if (t != CNTRL_REG_GOODVALUE) {
|
|
printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> "
|
|
"%08x\n", t, CNTRL_REG_GOODVALUE);
|
|
writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET);
|
|
}
|
|
iounmap(rebase);
|
|
}
|
|
#endif
|
|
|
|
static int __devinit sx_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
struct sx_board *board;
|
|
unsigned int i, reg;
|
|
int retval = -EIO;
|
|
|
|
mutex_lock(&sx_boards_lock);
|
|
i = sx_find_free_board();
|
|
if (i == SX_NBOARDS) {
|
|
mutex_unlock(&sx_boards_lock);
|
|
goto err;
|
|
}
|
|
board = &boards[i];
|
|
board->flags |= SX_BOARD_PRESENT;
|
|
mutex_unlock(&sx_boards_lock);
|
|
|
|
retval = pci_enable_device(pdev);
|
|
if (retval)
|
|
goto err_flag;
|
|
|
|
board->flags &= ~SX_BOARD_TYPE;
|
|
board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD :
|
|
SX_CFPCI_BOARD;
|
|
|
|
/* CF boards use base address 3.... */
|
|
reg = IS_CF_BOARD(board) ? 3 : 2;
|
|
retval = pci_request_region(pdev, reg, "sx");
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "can't request region\n");
|
|
goto err_flag;
|
|
}
|
|
board->hw_base = pci_resource_start(pdev, reg);
|
|
board->base2 =
|
|
board->base = pci_iomap(pdev, reg, WINDOW_LEN(board));
|
|
if (!board->base) {
|
|
dev_err(&pdev->dev, "ioremap failed\n");
|
|
goto err_reg;
|
|
}
|
|
|
|
/* Most of the stuff on the CF board is offset by 0x18000 .... */
|
|
if (IS_CF_BOARD(board))
|
|
board->base += 0x18000;
|
|
|
|
board->irq = pdev->irq;
|
|
|
|
dev_info(&pdev->dev, "Got a specialix card: %p(%d) %x.\n", board->base,
|
|
board->irq, board->flags);
|
|
|
|
if (!probe_sx(board)) {
|
|
retval = -EIO;
|
|
goto err_unmap;
|
|
}
|
|
|
|
fix_sx_pci(pdev, board);
|
|
|
|
pci_set_drvdata(pdev, board);
|
|
|
|
return 0;
|
|
err_unmap:
|
|
pci_iounmap(pdev, board->base);
|
|
err_reg:
|
|
pci_release_region(pdev, reg);
|
|
err_flag:
|
|
board->flags &= ~SX_BOARD_PRESENT;
|
|
err:
|
|
return retval;
|
|
#else
|
|
return -ENODEV;
|
|
#endif
|
|
}
|
|
|
|
static void __devexit sx_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct sx_board *board = pci_get_drvdata(pdev);
|
|
|
|
sx_remove_card(board, pdev);
|
|
}
|
|
|
|
/* Specialix has a whole bunch of cards with 0x2000 as the device ID. They say
|
|
its because the standard requires it. So check for SUBVENDOR_ID. */
|
|
static struct pci_device_id sx_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
|
|
.subvendor = PCI_ANY_ID, .subdevice = 0x0200 },
|
|
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
|
|
.subvendor = PCI_ANY_ID, .subdevice = 0x0300 },
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, sx_pci_tbl);
|
|
|
|
static struct pci_driver sx_pcidriver = {
|
|
.name = "sx",
|
|
.id_table = sx_pci_tbl,
|
|
.probe = sx_pci_probe,
|
|
.remove = __devexit_p(sx_pci_remove)
|
|
};
|
|
|
|
static int __init sx_init(void)
|
|
{
|
|
#ifdef CONFIG_EISA
|
|
int retval1;
|
|
#endif
|
|
#ifdef CONFIG_ISA
|
|
struct sx_board *board;
|
|
unsigned int i;
|
|
#endif
|
|
unsigned int found = 0;
|
|
int retval;
|
|
|
|
func_enter();
|
|
sx_dprintk(SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n",
|
|
sx_debug);
|
|
if (abs((long)(&sx_debug) - sx_debug) < 0x10000) {
|
|
printk(KERN_WARNING "sx: sx_debug is an address, instead of a "
|
|
"value. Assuming -1.\n(%p)\n", &sx_debug);
|
|
sx_debug = -1;
|
|
}
|
|
|
|
if (misc_register(&sx_fw_device) < 0) {
|
|
printk(KERN_ERR "SX: Unable to register firmware loader "
|
|
"driver.\n");
|
|
return -EIO;
|
|
}
|
|
#ifdef CONFIG_ISA
|
|
for (i = 0; i < NR_SX_ADDRS; i++) {
|
|
board = &boards[found];
|
|
board->hw_base = sx_probe_addrs[i];
|
|
board->hw_len = SX_WINDOW_LEN;
|
|
if (!request_region(board->hw_base, board->hw_len, "sx"))
|
|
continue;
|
|
board->base2 =
|
|
board->base = ioremap(board->hw_base, board->hw_len);
|
|
if (!board->base)
|
|
goto err_sx_reg;
|
|
board->flags &= ~SX_BOARD_TYPE;
|
|
board->flags |= SX_ISA_BOARD;
|
|
board->irq = sx_irqmask ? -1 : 0;
|
|
|
|
if (probe_sx(board)) {
|
|
board->flags |= SX_BOARD_PRESENT;
|
|
found++;
|
|
} else {
|
|
iounmap(board->base);
|
|
err_sx_reg:
|
|
release_region(board->hw_base, board->hw_len);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < NR_SI_ADDRS; i++) {
|
|
board = &boards[found];
|
|
board->hw_base = si_probe_addrs[i];
|
|
board->hw_len = SI2_ISA_WINDOW_LEN;
|
|
if (!request_region(board->hw_base, board->hw_len, "sx"))
|
|
continue;
|
|
board->base2 =
|
|
board->base = ioremap(board->hw_base, board->hw_len);
|
|
if (!board->base)
|
|
goto err_si_reg;
|
|
board->flags &= ~SX_BOARD_TYPE;
|
|
board->flags |= SI_ISA_BOARD;
|
|
board->irq = sx_irqmask ? -1 : 0;
|
|
|
|
if (probe_si(board)) {
|
|
board->flags |= SX_BOARD_PRESENT;
|
|
found++;
|
|
} else {
|
|
iounmap(board->base);
|
|
err_si_reg:
|
|
release_region(board->hw_base, board->hw_len);
|
|
}
|
|
}
|
|
for (i = 0; i < NR_SI1_ADDRS; i++) {
|
|
board = &boards[found];
|
|
board->hw_base = si1_probe_addrs[i];
|
|
board->hw_len = SI1_ISA_WINDOW_LEN;
|
|
if (!request_region(board->hw_base, board->hw_len, "sx"))
|
|
continue;
|
|
board->base2 =
|
|
board->base = ioremap(board->hw_base, board->hw_len);
|
|
if (!board->base)
|
|
goto err_si1_reg;
|
|
board->flags &= ~SX_BOARD_TYPE;
|
|
board->flags |= SI1_ISA_BOARD;
|
|
board->irq = sx_irqmask ? -1 : 0;
|
|
|
|
if (probe_si(board)) {
|
|
board->flags |= SX_BOARD_PRESENT;
|
|
found++;
|
|
} else {
|
|
iounmap(board->base);
|
|
err_si1_reg:
|
|
release_region(board->hw_base, board->hw_len);
|
|
}
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_EISA
|
|
retval1 = eisa_driver_register(&sx_eisadriver);
|
|
#endif
|
|
retval = pci_register_driver(&sx_pcidriver);
|
|
|
|
if (found) {
|
|
printk(KERN_INFO "sx: total of %d boards detected.\n", found);
|
|
retval = 0;
|
|
} else if (retval) {
|
|
#ifdef CONFIG_EISA
|
|
retval = retval1;
|
|
if (retval1)
|
|
#endif
|
|
misc_deregister(&sx_fw_device);
|
|
}
|
|
|
|
func_exit();
|
|
return retval;
|
|
}
|
|
|
|
static void __exit sx_exit(void)
|
|
{
|
|
int i;
|
|
|
|
func_enter();
|
|
#ifdef CONFIG_EISA
|
|
eisa_driver_unregister(&sx_eisadriver);
|
|
#endif
|
|
pci_unregister_driver(&sx_pcidriver);
|
|
|
|
for (i = 0; i < SX_NBOARDS; i++)
|
|
sx_remove_card(&boards[i], NULL);
|
|
|
|
if (misc_deregister(&sx_fw_device) < 0) {
|
|
printk(KERN_INFO "sx: couldn't deregister firmware loader "
|
|
"device\n");
|
|
}
|
|
sx_dprintk(SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n",
|
|
sx_initialized);
|
|
if (sx_initialized)
|
|
sx_release_drivers();
|
|
|
|
kfree(sx_ports);
|
|
func_exit();
|
|
}
|
|
|
|
module_init(sx_init);
|
|
module_exit(sx_exit);
|