AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 07:05:08 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
967dd82ffc
linux_dsm_epyc7002/drivers/net/dsa/b53/b53_mdio.c
Florian Fainelli 967dd82ffc net: dsa: b53: Add support for Broadcom RoboSwitch 
This patch adds support for Broadcom's BCM53xx switch family, also known
as RoboSwitch. Some of these switches are ubiquituous, found in home
routers, Wi-Fi routers, DSL and cable modem gateways and other
networking related products.

This drivers adds the library driver (b53_common.c) as well as a few bus
glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and
memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx).

Basic operations are supported to bring the Layer 1/2 up and running,
but not much more at this point, subsequent patches add the remaining
features.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 22:21:29 -07:00

382 lines
8.9 KiB
C
Raw Blame History

/*
* B53 register access through MII registers
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/phy.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/brcmphy.h>
#include <linux/rtnetlink.h>
#include <net/dsa.h>
#include "b53_priv.h"
/* MII registers */
#define REG_MII_PAGE 0x10 /* MII Page register */
#define REG_MII_ADDR 0x11 /* MII Address register */
#define REG_MII_DATA0 0x18 /* MII Data register 0 */
#define REG_MII_DATA1 0x19 /* MII Data register 1 */
#define REG_MII_DATA2 0x1a /* MII Data register 2 */
#define REG_MII_DATA3 0x1b /* MII Data register 3 */
#define REG_MII_PAGE_ENABLE BIT(0)
#define REG_MII_ADDR_WRITE BIT(0)
#define REG_MII_ADDR_READ BIT(1)
static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
{
int i;
u16 v;
int ret;
struct mii_bus *bus = dev->priv;
if (dev->current_page != page) {
/* set page number */
v = (page << 8) | REG_MII_PAGE_ENABLE;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_PAGE, v);
if (ret)
return ret;
dev->current_page = page;
}
/* set register address */
v = (reg << 8) | op;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v);
if (ret)
return ret;
/* check if operation completed */
for (i = 0; i < 5; ++i) {
v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_ADDR);
if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
break;
usleep_range(10, 100);
}
if (WARN_ON(i == 5))
return -EIO;
return 0;
}
static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0) & 0xff;
return 0;
}
static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
return 0;
}
static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
*val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA1) << 16;
return 0;
}
static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct mii_bus *bus = dev->priv;
u64 temp = 0;
int i;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
for (i = 2; i >= 0; i--) {
temp <<= 16;
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i);
}
*val = temp;
return 0;
}
static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct mii_bus *bus = dev->priv;
u64 temp = 0;
int i;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
for (i = 3; i >= 0; i--) {
temp <<= 16;
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i);
}
*val = temp;
return 0;
}
static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0, value);
if (ret)
return ret;
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0, value);
if (ret)
return ret;
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u32 temp = value;
for (i = 0; i < 2; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u64 temp = value;
for (i = 0; i < 3; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u64 temp = value;
for (i = 0; i < 4; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg,
u16 *value)
{
struct mii_bus *bus = dev->priv;
*value = mdiobus_read_nested(bus, addr, reg);
return 0;
}
static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg,
u16 value)
{
struct mii_bus *bus = dev->bus;
return mdiobus_write_nested(bus, addr, reg, value);
}
static struct b53_io_ops b53_mdio_ops = {
.read8 = b53_mdio_read8,
.read16 = b53_mdio_read16,
.read32 = b53_mdio_read32,
.read48 = b53_mdio_read48,
.read64 = b53_mdio_read64,
.write8 = b53_mdio_write8,
.write16 = b53_mdio_write16,
.write32 = b53_mdio_write32,
.write48 = b53_mdio_write48,
.write64 = b53_mdio_write64,
.phy_read16 = b53_mdio_phy_read16,
.phy_write16 = b53_mdio_phy_write16,
};
#define B53_BRCM_OUI_1 0x0143bc00
#define B53_BRCM_OUI_2 0x03625c00
#define B53_BRCM_OUI_3 0x00406000
static int b53_mdio_probe(struct mdio_device *mdiodev)
{
struct b53_device *dev;
u32 phy_id;
int ret;
/* allow the generic PHY driver to take over the non-management MDIO
* addresses
*/
if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) {
dev_err(&mdiodev->dev, "leaving address %d to PHY\n",
mdiodev->addr);
return -ENODEV;
}
/* read the first port's id */
phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16;
phy_id |= mdiobus_read(mdiodev->bus, 0, 3);
/* BCM5325, BCM539x (OUI_1)
* BCM53125, BCM53128 (OUI_2)
* BCM5365 (OUI_3)
*/
if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_3) {
dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
return -ENODEV;
}
dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus);
if (!dev)
return -ENOMEM;
/* we don't use page 0xff, so force a page set */
dev->current_page = 0xff;
dev->bus = mdiodev->bus;
dev_set_drvdata(&mdiodev->dev, dev);
ret = b53_switch_register(dev);
if (ret) {
dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret);
return ret;
}
return ret;
}
static void b53_mdio_remove(struct mdio_device *mdiodev)
{
struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
struct dsa_switch *ds = dev->ds;
dsa_unregister_switch(ds);
}
static const struct of_device_id b53_of_match[] = {
{ .compatible = "brcm,bcm5325" },
{ .compatible = "brcm,bcm53115" },
{ .compatible = "brcm,bcm53125" },
{ .compatible = "brcm,bcm53128" },
{ .compatible = "brcm,bcm5365" },
{ .compatible = "brcm,bcm5395" },
{ .compatible = "brcm,bcm5397" },
{ .compatible = "brcm,bcm5398" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, b53_of_match);
static struct mdio_driver b53_mdio_driver = {
.probe = b53_mdio_probe,
.remove = b53_mdio_remove,
.mdiodrv.driver = {
.name = "bcm53xx",
.of_match_table = b53_of_match,
},
};
static int __init b53_mdio_driver_register(void)
{
return mdio_driver_register(&b53_mdio_driver);
}
module_init(b53_mdio_driver_register);
static void __exit b53_mdio_driver_unregister(void)
{
mdio_driver_unregister(&b53_mdio_driver);
}
module_exit(b53_mdio_driver_unregister);
MODULE_DESCRIPTION("B53 MDIO access driver");
MODULE_LICENSE("Dual BSD/GPL");
Reference in New Issue View Git Blame Copy Permalink