AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
9659c1af45
linux_dsm_epyc7002/arch/sparc/kernel/pci_psycho.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

619 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/* pci_psycho.c: PSYCHO/U2P specific PCI controller support.
*
* Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
* Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <asm/iommu.h>
#include <asm/irq.h>
#include <asm/starfire.h>
#include <asm/prom.h>
#include <asm/upa.h>
#include "pci_impl.h"
#include "iommu_common.h"
#include "psycho_common.h"
#define DRIVER_NAME "psycho"
#define PFX DRIVER_NAME ": "
/* Misc. PSYCHO PCI controller register offsets and definitions. */
#define PSYCHO_CONTROL 0x0010UL
#define PSYCHO_CONTROL_IMPL 0xf000000000000000UL /* Implementation of this PSYCHO*/
#define PSYCHO_CONTROL_VER 0x0f00000000000000UL /* Version of this PSYCHO */
#define PSYCHO_CONTROL_MID 0x00f8000000000000UL /* UPA Module ID of PSYCHO */
#define PSYCHO_CONTROL_IGN 0x0007c00000000000UL /* Interrupt Group Number */
#define PSYCHO_CONTROL_RESV 0x00003ffffffffff0UL /* Reserved */
#define PSYCHO_CONTROL_APCKEN 0x0000000000000008UL /* Address Parity Check Enable */
#define PSYCHO_CONTROL_APERR 0x0000000000000004UL /* Incoming System Addr Parerr */
#define PSYCHO_CONTROL_IAP 0x0000000000000002UL /* Invert UPA Parity */
#define PSYCHO_CONTROL_MODE 0x0000000000000001UL /* PSYCHO clock mode */
#define PSYCHO_PCIA_CTRL 0x2000UL
#define PSYCHO_PCIB_CTRL 0x4000UL
#define PSYCHO_PCICTRL_RESV1 0xfffffff000000000UL /* Reserved */
#define PSYCHO_PCICTRL_SBH_ERR 0x0000000800000000UL /* Streaming byte hole error */
#define PSYCHO_PCICTRL_SERR 0x0000000400000000UL /* SERR signal asserted */
#define PSYCHO_PCICTRL_SPEED 0x0000000200000000UL /* PCI speed (1 is U2P clock) */
#define PSYCHO_PCICTRL_RESV2 0x00000001ffc00000UL /* Reserved */
#define PSYCHO_PCICTRL_ARB_PARK 0x0000000000200000UL /* PCI arbitration parking */
#define PSYCHO_PCICTRL_RESV3 0x00000000001ff800UL /* Reserved */
#define PSYCHO_PCICTRL_SBH_INT 0x0000000000000400UL /* Streaming byte hole int enab */
#define PSYCHO_PCICTRL_WEN 0x0000000000000200UL /* Power Mgmt Wake Enable */
#define PSYCHO_PCICTRL_EEN 0x0000000000000100UL /* PCI Error Interrupt Enable */
#define PSYCHO_PCICTRL_RESV4 0x00000000000000c0UL /* Reserved */
#define PSYCHO_PCICTRL_AEN 0x000000000000003fUL /* PCI DVMA Arbitration Enable */
/* PSYCHO error handling support. */
/* Helper function of IOMMU error checking, which checks out
* the state of the streaming buffers. The IOMMU lock is
* held when this is called.
*
* For the PCI error case we know which PBM (and thus which
* streaming buffer) caused the error, but for the uncorrectable
* error case we do not. So we always check both streaming caches.
*/
#define PSYCHO_STRBUF_CONTROL_A 0x2800UL
#define PSYCHO_STRBUF_CONTROL_B 0x4800UL
#define PSYCHO_STRBUF_CTRL_LPTR 0x00000000000000f0UL /* LRU Lock Pointer */
#define PSYCHO_STRBUF_CTRL_LENAB 0x0000000000000008UL /* LRU Lock Enable */
#define PSYCHO_STRBUF_CTRL_RRDIS 0x0000000000000004UL /* Rerun Disable */
#define PSYCHO_STRBUF_CTRL_DENAB 0x0000000000000002UL /* Diagnostic Mode Enable */
#define PSYCHO_STRBUF_CTRL_ENAB 0x0000000000000001UL /* Streaming Buffer Enable */
#define PSYCHO_STRBUF_FLUSH_A 0x2808UL
#define PSYCHO_STRBUF_FLUSH_B 0x4808UL
#define PSYCHO_STRBUF_FSYNC_A 0x2810UL
#define PSYCHO_STRBUF_FSYNC_B 0x4810UL
#define PSYCHO_STC_DATA_A 0xb000UL
#define PSYCHO_STC_DATA_B 0xc000UL
#define PSYCHO_STC_ERR_A 0xb400UL
#define PSYCHO_STC_ERR_B 0xc400UL
#define PSYCHO_STC_TAG_A 0xb800UL
#define PSYCHO_STC_TAG_B 0xc800UL
#define PSYCHO_STC_LINE_A 0xb900UL
#define PSYCHO_STC_LINE_B 0xc900UL
/* When an Uncorrectable Error or a PCI Error happens, we
* interrogate the IOMMU state to see if it is the cause.
*/
#define PSYCHO_IOMMU_CONTROL 0x0200UL
#define PSYCHO_IOMMU_CTRL_RESV 0xfffffffff9000000UL /* Reserved */
#define PSYCHO_IOMMU_CTRL_XLTESTAT 0x0000000006000000UL /* Translation Error Status */
#define PSYCHO_IOMMU_CTRL_XLTEERR 0x0000000001000000UL /* Translation Error encountered */
#define PSYCHO_IOMMU_CTRL_LCKEN 0x0000000000800000UL /* Enable translation locking */
#define PSYCHO_IOMMU_CTRL_LCKPTR 0x0000000000780000UL /* Translation lock pointer */
#define PSYCHO_IOMMU_CTRL_TSBSZ 0x0000000000070000UL /* TSB Size */
#define PSYCHO_IOMMU_TSBSZ_1K 0x0000000000000000UL /* TSB Table 1024 8-byte entries */
#define PSYCHO_IOMMU_TSBSZ_2K 0x0000000000010000UL /* TSB Table 2048 8-byte entries */
#define PSYCHO_IOMMU_TSBSZ_4K 0x0000000000020000UL /* TSB Table 4096 8-byte entries */
#define PSYCHO_IOMMU_TSBSZ_8K 0x0000000000030000UL /* TSB Table 8192 8-byte entries */
#define PSYCHO_IOMMU_TSBSZ_16K 0x0000000000040000UL /* TSB Table 16k 8-byte entries */
#define PSYCHO_IOMMU_TSBSZ_32K 0x0000000000050000UL /* TSB Table 32k 8-byte entries */
#define PSYCHO_IOMMU_TSBSZ_64K 0x0000000000060000UL /* TSB Table 64k 8-byte entries */
#define PSYCHO_IOMMU_TSBSZ_128K 0x0000000000070000UL /* TSB Table 128k 8-byte entries */
#define PSYCHO_IOMMU_CTRL_RESV2 0x000000000000fff8UL /* Reserved */
#define PSYCHO_IOMMU_CTRL_TBWSZ 0x0000000000000004UL /* Assumed page size, 0=8k 1=64k */
#define PSYCHO_IOMMU_CTRL_DENAB 0x0000000000000002UL /* Diagnostic mode enable */
#define PSYCHO_IOMMU_CTRL_ENAB 0x0000000000000001UL /* IOMMU Enable */
#define PSYCHO_IOMMU_TSBBASE 0x0208UL
#define PSYCHO_IOMMU_FLUSH 0x0210UL
#define PSYCHO_IOMMU_TAG 0xa580UL
#define PSYCHO_IOMMU_DATA 0xa600UL
/* Uncorrectable Errors. Cause of the error and the address are
* recorded in the UE_AFSR and UE_AFAR of PSYCHO. They are errors
* relating to UPA interface transactions.
*/
#define PSYCHO_UE_AFSR 0x0030UL
#define PSYCHO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO is cause */
#define PSYCHO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read is cause */
#define PSYCHO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write is cause */
#define PSYCHO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */
#define PSYCHO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read is cause */
#define PSYCHO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write is cause*/
#define PSYCHO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */
#define PSYCHO_UEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask of failed transfer */
#define PSYCHO_UEAFSR_DOFF 0x00000000e0000000UL /* Doubleword Offset */
#define PSYCHO_UEAFSR_MID 0x000000001f000000UL /* UPA MID causing the fault */
#define PSYCHO_UEAFSR_BLK 0x0000000000800000UL /* Trans was block operation */
#define PSYCHO_UEAFSR_RESV2 0x00000000007fffffUL /* Reserved */
#define PSYCHO_UE_AFAR 0x0038UL
static irqreturn_t psycho_ue_intr(int irq, void *dev_id)
{
struct pci_pbm_info *pbm = dev_id;
unsigned long afsr_reg = pbm->controller_regs + PSYCHO_UE_AFSR;
unsigned long afar_reg = pbm->controller_regs + PSYCHO_UE_AFAR;
unsigned long afsr, afar, error_bits;
int reported;
/* Latch uncorrectable error status. */
afar = upa_readq(afar_reg);
afsr = upa_readq(afsr_reg);
/* Clear the primary/secondary error status bits. */
error_bits = afsr &
(PSYCHO_UEAFSR_PPIO | PSYCHO_UEAFSR_PDRD | PSYCHO_UEAFSR_PDWR |
PSYCHO_UEAFSR_SPIO | PSYCHO_UEAFSR_SDRD | PSYCHO_UEAFSR_SDWR);
if (!error_bits)
return IRQ_NONE;
upa_writeq(error_bits, afsr_reg);
/* Log the error. */
printk("%s: Uncorrectable Error, primary error type[%s]\n",
pbm->name,
(((error_bits & PSYCHO_UEAFSR_PPIO) ?
"PIO" :
((error_bits & PSYCHO_UEAFSR_PDRD) ?
"DMA Read" :
((error_bits & PSYCHO_UEAFSR_PDWR) ?
"DMA Write" : "???")))));
printk("%s: bytemask[%04lx] dword_offset[%lx] UPA_MID[%02lx] was_block(%d)\n",
pbm->name,
(afsr & PSYCHO_UEAFSR_BMSK) >> 32UL,
(afsr & PSYCHO_UEAFSR_DOFF) >> 29UL,
(afsr & PSYCHO_UEAFSR_MID) >> 24UL,
((afsr & PSYCHO_UEAFSR_BLK) ? 1 : 0));
printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
printk("%s: UE Secondary errors [", pbm->name);
reported = 0;
if (afsr & PSYCHO_UEAFSR_SPIO) {
reported++;
printk("(PIO)");
}
if (afsr & PSYCHO_UEAFSR_SDRD) {
reported++;
printk("(DMA Read)");
}
if (afsr & PSYCHO_UEAFSR_SDWR) {
reported++;
printk("(DMA Write)");
}
if (!reported)
printk("(none)");
printk("]\n");
/* Interrogate both IOMMUs for error status. */
psycho_check_iommu_error(pbm, afsr, afar, UE_ERR);
if (pbm->sibling)
psycho_check_iommu_error(pbm->sibling, afsr, afar, UE_ERR);
return IRQ_HANDLED;
}
/* Correctable Errors. */
#define PSYCHO_CE_AFSR 0x0040UL
#define PSYCHO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO is cause */
#define PSYCHO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read is cause */
#define PSYCHO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write is cause */
#define PSYCHO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */
#define PSYCHO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read is cause */
#define PSYCHO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write is cause*/
#define PSYCHO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */
#define PSYCHO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */
#define PSYCHO_CEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask of failed transfer */
#define PSYCHO_CEAFSR_DOFF 0x00000000e0000000UL /* Double Offset */
#define PSYCHO_CEAFSR_MID 0x000000001f000000UL /* UPA MID causing the fault */
#define PSYCHO_CEAFSR_BLK 0x0000000000800000UL /* Trans was block operation */
#define PSYCHO_CEAFSR_RESV2 0x00000000007fffffUL /* Reserved */
#define PSYCHO_CE_AFAR 0x0040UL
static irqreturn_t psycho_ce_intr(int irq, void *dev_id)
{
struct pci_pbm_info *pbm = dev_id;
unsigned long afsr_reg = pbm->controller_regs + PSYCHO_CE_AFSR;
unsigned long afar_reg = pbm->controller_regs + PSYCHO_CE_AFAR;
unsigned long afsr, afar, error_bits;
int reported;
/* Latch error status. */
afar = upa_readq(afar_reg);
afsr = upa_readq(afsr_reg);
/* Clear primary/secondary error status bits. */
error_bits = afsr &
(PSYCHO_CEAFSR_PPIO | PSYCHO_CEAFSR_PDRD | PSYCHO_CEAFSR_PDWR |
PSYCHO_CEAFSR_SPIO | PSYCHO_CEAFSR_SDRD | PSYCHO_CEAFSR_SDWR);
if (!error_bits)
return IRQ_NONE;
upa_writeq(error_bits, afsr_reg);
/* Log the error. */
printk("%s: Correctable Error, primary error type[%s]\n",
pbm->name,
(((error_bits & PSYCHO_CEAFSR_PPIO) ?
"PIO" :
((error_bits & PSYCHO_CEAFSR_PDRD) ?
"DMA Read" :
((error_bits & PSYCHO_CEAFSR_PDWR) ?
"DMA Write" : "???")))));
/* XXX Use syndrome and afar to print out module string just like
* XXX UDB CE trap handler does... -DaveM
*/
printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
"UPA_MID[%02lx] was_block(%d)\n",
pbm->name,
(afsr & PSYCHO_CEAFSR_ESYND) >> 48UL,
(afsr & PSYCHO_CEAFSR_BMSK) >> 32UL,
(afsr & PSYCHO_CEAFSR_DOFF) >> 29UL,
(afsr & PSYCHO_CEAFSR_MID) >> 24UL,
((afsr & PSYCHO_CEAFSR_BLK) ? 1 : 0));
printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
printk("%s: CE Secondary errors [", pbm->name);
reported = 0;
if (afsr & PSYCHO_CEAFSR_SPIO) {
reported++;
printk("(PIO)");
}
if (afsr & PSYCHO_CEAFSR_SDRD) {
reported++;
printk("(DMA Read)");
}
if (afsr & PSYCHO_CEAFSR_SDWR) {
reported++;
printk("(DMA Write)");
}
if (!reported)
printk("(none)");
printk("]\n");
return IRQ_HANDLED;
}
/* PCI Errors. They are signalled by the PCI bus module since they
* are associated with a specific bus segment.
*/
#define PSYCHO_PCI_AFSR_A 0x2010UL
#define PSYCHO_PCI_AFSR_B 0x4010UL
#define PSYCHO_PCI_AFAR_A 0x2018UL
#define PSYCHO_PCI_AFAR_B 0x4018UL
/* XXX What about PowerFail/PowerManagement??? -DaveM */
#define PSYCHO_ECC_CTRL 0x0020
#define PSYCHO_ECCCTRL_EE 0x8000000000000000UL /* Enable ECC Checking */
#define PSYCHO_ECCCTRL_UE 0x4000000000000000UL /* Enable UE Interrupts */
#define PSYCHO_ECCCTRL_CE 0x2000000000000000UL /* Enable CE INterrupts */
static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
{
struct platform_device *op = of_find_device_by_node(pbm->op->dev.of_node);
unsigned long base = pbm->controller_regs;
u64 tmp;
int err;
if (!op)
return;
/* Psycho interrupt property order is:
* 0: PCIERR INO for this PBM
* 1: UE ERR
* 2: CE ERR
* 3: POWER FAIL
* 4: SPARE HARDWARE
* 5: POWER MANAGEMENT
*/
if (op->archdata.num_irqs < 6)
return;
/* We really mean to ignore the return result here. Two
* PCI controller share the same interrupt numbers and
* drive the same front-end hardware.
*/
err = request_irq(op->archdata.irqs[1], psycho_ue_intr, IRQF_SHARED,
"PSYCHO_UE", pbm);
err = request_irq(op->archdata.irqs[2], psycho_ce_intr, IRQF_SHARED,
"PSYCHO_CE", pbm);
/* This one, however, ought not to fail. We can just warn
* about it since the system can still operate properly even
* if this fails.
*/
err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO_PCIERR", pbm);
if (err)
printk(KERN_WARNING "%s: Could not register PCIERR, "
"err=%d\n", pbm->name, err);
/* Enable UE and CE interrupts for controller. */
upa_writeq((PSYCHO_ECCCTRL_EE |
PSYCHO_ECCCTRL_UE |
PSYCHO_ECCCTRL_CE), base + PSYCHO_ECC_CTRL);
/* Enable PCI Error interrupts and clear error
* bits for each PBM.
*/
tmp = upa_readq(base + PSYCHO_PCIA_CTRL);
tmp |= (PSYCHO_PCICTRL_SERR |
PSYCHO_PCICTRL_SBH_ERR |
PSYCHO_PCICTRL_EEN);
tmp &= ~(PSYCHO_PCICTRL_SBH_INT);
upa_writeq(tmp, base + PSYCHO_PCIA_CTRL);
tmp = upa_readq(base + PSYCHO_PCIB_CTRL);
tmp |= (PSYCHO_PCICTRL_SERR |
PSYCHO_PCICTRL_SBH_ERR |
PSYCHO_PCICTRL_EEN);
tmp &= ~(PSYCHO_PCICTRL_SBH_INT);
upa_writeq(tmp, base + PSYCHO_PCIB_CTRL);
}
/* PSYCHO boot time probing and initialization. */
static void pbm_config_busmastering(struct pci_pbm_info *pbm)
{
u8 *addr;
/* Set cache-line size to 64 bytes, this is actually
* a nop but I do it for completeness.
*/
addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
0, PCI_CACHE_LINE_SIZE);
pci_config_write8(addr, 64 / sizeof(u32));
/* Set PBM latency timer to 64 PCI clocks. */
addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
0, PCI_LATENCY_TIMER);
pci_config_write8(addr, 64);
}
static void psycho_scan_bus(struct pci_pbm_info *pbm,
struct device *parent)
{
pbm_config_busmastering(pbm);
pbm->is_66mhz_capable = 0;
pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
/* After the PCI bus scan is complete, we can register
* the error interrupt handlers.
*/
psycho_register_error_handlers(pbm);
}
#define PSYCHO_IRQ_RETRY 0x1a00UL
#define PSYCHO_PCIA_DIAG 0x2020UL
#define PSYCHO_PCIB_DIAG 0x4020UL
#define PSYCHO_PCIDIAG_RESV 0xffffffffffffff80UL /* Reserved */
#define PSYCHO_PCIDIAG_DRETRY 0x0000000000000040UL /* Disable retry limit */
#define PSYCHO_PCIDIAG_DISYNC 0x0000000000000020UL /* Disable DMA wr / irq sync */
#define PSYCHO_PCIDIAG_DDWSYNC 0x0000000000000010UL /* Disable DMA wr / PIO rd sync */
#define PSYCHO_PCIDIAG_IDDPAR 0x0000000000000008UL /* Invert DMA data parity */
#define PSYCHO_PCIDIAG_IPDPAR 0x0000000000000004UL /* Invert PIO data parity */
#define PSYCHO_PCIDIAG_IPAPAR 0x0000000000000002UL /* Invert PIO address parity */
#define PSYCHO_PCIDIAG_LPBACK 0x0000000000000001UL /* Enable loopback mode */
static void psycho_controller_hwinit(struct pci_pbm_info *pbm)
{
u64 tmp;
upa_writeq(5, pbm->controller_regs + PSYCHO_IRQ_RETRY);
/* Enable arbiter for all PCI slots. */
tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIA_CTRL);
tmp |= PSYCHO_PCICTRL_AEN;
upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIA_CTRL);
tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIB_CTRL);
tmp |= PSYCHO_PCICTRL_AEN;
upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIB_CTRL);
/* Disable DMA write / PIO read synchronization on
* both PCI bus segments.
* [ U2P Erratum 1243770, STP2223BGA data sheet ]
*/
tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIA_DIAG);
tmp |= PSYCHO_PCIDIAG_DDWSYNC;
upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIA_DIAG);
tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIB_DIAG);
tmp |= PSYCHO_PCIDIAG_DDWSYNC;
upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIB_DIAG);
}
static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
int is_pbm_a)
{
unsigned long base = pbm->controller_regs;
u64 control;
if (is_pbm_a) {
pbm->stc.strbuf_control = base + PSYCHO_STRBUF_CONTROL_A;
pbm->stc.strbuf_pflush = base + PSYCHO_STRBUF_FLUSH_A;
pbm->stc.strbuf_fsync = base + PSYCHO_STRBUF_FSYNC_A;
pbm->stc.strbuf_err_stat = base + PSYCHO_STC_ERR_A;
pbm->stc.strbuf_tag_diag = base + PSYCHO_STC_TAG_A;
pbm->stc.strbuf_line_diag= base + PSYCHO_STC_LINE_A;
} else {
pbm->stc.strbuf_control = base + PSYCHO_STRBUF_CONTROL_B;
pbm->stc.strbuf_pflush = base + PSYCHO_STRBUF_FLUSH_B;
pbm->stc.strbuf_fsync = base + PSYCHO_STRBUF_FSYNC_B;
pbm->stc.strbuf_err_stat = base + PSYCHO_STC_ERR_B;
pbm->stc.strbuf_tag_diag = base + PSYCHO_STC_TAG_B;
pbm->stc.strbuf_line_diag= base + PSYCHO_STC_LINE_B;
}
/* PSYCHO's streaming buffer lacks ctx flushing. */
pbm->stc.strbuf_ctxflush = 0;
pbm->stc.strbuf_ctxmatch_base = 0;
pbm->stc.strbuf_flushflag = (volatile unsigned long *)
((((unsigned long)&pbm->stc.__flushflag_buf[0])
+ 63UL)
& ~63UL);
pbm->stc.strbuf_flushflag_pa = (unsigned long)
__pa(pbm->stc.strbuf_flushflag);
/* Enable the streaming buffer. We have to be careful
* just in case OBP left it with LRU locking enabled.
*
* It is possible to control if PBM will be rerun on
* line misses. Currently I just retain whatever setting
* OBP left us with. All checks so far show it having
* a value of zero.
*/
#undef PSYCHO_STRBUF_RERUN_ENABLE
#undef PSYCHO_STRBUF_RERUN_DISABLE
control = upa_readq(pbm->stc.strbuf_control);
control |= PSYCHO_STRBUF_CTRL_ENAB;
control &= ~(PSYCHO_STRBUF_CTRL_LENAB | PSYCHO_STRBUF_CTRL_LPTR);
#ifdef PSYCHO_STRBUF_RERUN_ENABLE
control &= ~(PSYCHO_STRBUF_CTRL_RRDIS);
#else
#ifdef PSYCHO_STRBUF_RERUN_DISABLE
control |= PSYCHO_STRBUF_CTRL_RRDIS;
#endif
#endif
upa_writeq(control, pbm->stc.strbuf_control);
pbm->stc.strbuf_enabled = 1;
}
#define PSYCHO_IOSPACE_A 0x002000000UL
#define PSYCHO_IOSPACE_B 0x002010000UL
#define PSYCHO_IOSPACE_SIZE 0x00000ffffUL
#define PSYCHO_MEMSPACE_A 0x100000000UL
#define PSYCHO_MEMSPACE_B 0x180000000UL
#define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL
static void psycho_pbm_init(struct pci_pbm_info *pbm,
struct platform_device *op, int is_pbm_a)
{
psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO);
psycho_pbm_strbuf_init(pbm, is_pbm_a);
psycho_scan_bus(pbm, &op->dev);
}
static struct pci_pbm_info *psycho_find_sibling(u32 upa_portid)
{
struct pci_pbm_info *pbm;
for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
if (pbm->portid == upa_portid)
return pbm;
}
return NULL;
}
#define PSYCHO_CONFIGSPACE 0x001000000UL
static int psycho_probe(struct platform_device *op)
{
const struct linux_prom64_registers *pr_regs;
struct device_node *dp = op->dev.of_node;
struct pci_pbm_info *pbm;
struct iommu *iommu;
int is_pbm_a, err;
u32 upa_portid;
upa_portid = of_getintprop_default(dp, "upa-portid", 0xff);
err = -ENOMEM;
pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
if (!pbm) {
printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
goto out_err;
}
pbm->sibling = psycho_find_sibling(upa_portid);
if (pbm->sibling) {
iommu = pbm->sibling->iommu;
} else {
iommu = kzalloc(sizeof(struct iommu), GFP_KERNEL);
if (!iommu) {
printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
goto out_free_controller;
}
}
pbm->iommu = iommu;
pbm->portid = upa_portid;
pr_regs = of_get_property(dp, "reg", NULL);
err = -ENODEV;
if (!pr_regs) {
printk(KERN_ERR PFX "No reg property.\n");
goto out_free_iommu;
}
is_pbm_a = ((pr_regs[0].phys_addr & 0x6000) == 0x2000);
pbm->controller_regs = pr_regs[2].phys_addr;
pbm->config_space = (pr_regs[2].phys_addr + PSYCHO_CONFIGSPACE);
if (is_pbm_a) {
pbm->pci_afsr = pbm->controller_regs + PSYCHO_PCI_AFSR_A;
pbm->pci_afar = pbm->controller_regs + PSYCHO_PCI_AFAR_A;
pbm->pci_csr = pbm->controller_regs + PSYCHO_PCIA_CTRL;
} else {
pbm->pci_afsr = pbm->controller_regs + PSYCHO_PCI_AFSR_B;
pbm->pci_afar = pbm->controller_regs + PSYCHO_PCI_AFAR_B;
pbm->pci_csr = pbm->controller_regs + PSYCHO_PCIB_CTRL;
}
psycho_controller_hwinit(pbm);
if (!pbm->sibling) {
err = psycho_iommu_init(pbm, 128, 0xc0000000,
0xffffffff, PSYCHO_CONTROL);
if (err)
goto out_free_iommu;
/* If necessary, hook us up for starfire IRQ translations. */
if (this_is_starfire)
starfire_hookup(pbm->portid);
}
psycho_pbm_init(pbm, op, is_pbm_a);
pbm->next = pci_pbm_root;
pci_pbm_root = pbm;
if (pbm->sibling)
pbm->sibling->sibling = pbm;
dev_set_drvdata(&op->dev, pbm);
return 0;
out_free_iommu:
if (!pbm->sibling)
kfree(pbm->iommu);
out_free_controller:
kfree(pbm);
out_err:
return err;
}
static const struct of_device_id psycho_match[] = {
{
.name = "pci",
.compatible = "pci108e,8000",
},
{},
};
static struct platform_driver psycho_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = psycho_match,
},
.probe = psycho_probe,
};
static int __init psycho_init(void)
{
return platform_driver_register(&psycho_driver);
}
subsys_initcall(psycho_init);
Reference in New Issue View Git Blame Copy Permalink