linux_dsm_epyc7002/arch/arm/mach-omap2
Tony Lindgren 96554d7077 omap: Use a memory address for storing the debug port info instead of UART1 scratchpad
This removes the dependency to the UART1 being available for storing
the debug configuration in uncompress.h. This will simplify the
DEBUG_LL UART configuration for boards that may not have UART1, or
have an external UART as it requires only one mapping for DEBUG_LL.

The patch has a few limitations. Basically now we're assuming that
the kernel uncompress code won't overlap with OMAP_UART_INFO. We also
assume the printascii is called at least once before paging_init in
order for addruart to have a chance to read the UART setup from
OMAP_UART_INFO.

As suggested by Cyril Chemparathy <cyril@ti.com>,
Vikram Pandita <vikram.pandita@ti.com> and
Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier
patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-03 17:53:08 -07:00
..
include/mach omap: Use a memory address for storing the debug port info instead of UART1 scratchpad 2010-05-03 17:53:08 -07:00
board-2430sdp.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-3430sdp.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-3630sdp.c omap3: 3630sdp: Explicitly enable all UARTs 2010-03-15 16:34:19 -05:00
board-4430sdp.c omap4: Fix build break by moving omap_smc1 into a separate .S 2010-03-11 09:38:53 -08:00
board-am3517evm.c AM3517: initialize i2c subsystem after mux subsystem 2010-04-23 15:35:11 -07:00
board-apollon.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-cm-t35.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-devkit8000.c omap: Devkit8000: Remove unused pins 2010-04-23 15:37:24 -07:00
board-generic.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-h4.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-igep0020.c omap3: Fix EHCI port for IGEP v2 board 2010-04-23 15:35:11 -07:00
board-ldp.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-n8x0.c omap: Fix n8x0 mmc_mmc_init compile warnings and typos 2010-04-23 15:35:11 -07:00
board-omap3beagle.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-omap3evm.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-omap3pandora.c omap3: pandora: add missing i2c3 board_info 2010-03-11 15:55:43 -08:00
board-omap3touchbook.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-overo.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-rx51-peripherals.c omap: RX51: Remux to pull eMMC lines down when powering off 2010-02-15 10:03:34 -08:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51.c Merge branch 'pm-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-02-23 19:22:48 -08:00
board-sdp-flash.c omap: board-sdp-flash.c: Fix typos in debug output 2010-04-23 15:37:24 -07:00
board-zoom2.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-zoom3.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-zoom-debugboard.c omap3: zoom 2/3: Change debugboard serial port id 2010-03-15 16:34:20 -05:00
board-zoom-peripherals.c omap3: zoom2/3 / 3630sdp: Don't init always all uarts 2010-03-15 16:34:17 -05:00
clkt2xxx_apll.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clkt2xxx_dpllcore.c OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c 2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c 2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c 2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP clock: drop RATE_FIXED clock flag 2010-02-24 12:29:43 -07:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c OMAP3: clock: fix enable bit used for dpll4_m4x2 clock 2010-03-31 04:16:30 -06:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: Clocks: Change SPI Instance Names 2010-04-23 15:35:11 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c omap2: add USB initialization for tusb6010 2010-03-11 10:22:39 -08:00
clock2430_data.c OMAP clock: drop RATE_FIXED clock flag 2010-02-24 12:29:43 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: convert clock34xx.h to clock34xx_data.c 2009-12-11 16:12:15 -07:00
clock.c OMAP2+ clock: revise omap2_clk_{disable,enable}() 2010-02-24 17:45:16 -07:00
clock.h OMAP4: clock: Add dummy clock nodes for interface clocks 2010-02-24 17:45:17 -07:00
clockdomain.c OMAP4: prcm: Use logical OR instead of bitwise OR 2010-03-31 04:16:30 -06:00
clockdomains44xx.h ARM: OMAP4 clock domains : Add the missing Clock Domain Structure 2010-01-26 20:12:58 -07:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
cm4xxx.c omap: Fix 44xx compile 2009-09-24 16:23:07 -07:00
cm44xx.h ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4 2009-12-11 17:00:45 -07:00
cm-regbits-24xx.h [ARM] OMAP2 PRCM: clean up CM_IDLEST bits 2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h OMAP3 clock: add support for 192Mhz DPLL4M2 output 2010-02-24 12:15:03 -07:00
cm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
cm.c OMAP clock/hwmod: fix off-by-one errors 2009-12-11 17:00:43 -07:00
cm.h OMAP2/3 clock: Extend find_idlest() to pass back idle state value 2010-02-24 12:05:54 -07:00
control.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
cpuidle34xx.c OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
devices.c OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base 2010-04-23 15:35:11 -07:00
dpll3xxx.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap: fix a gpmc nand problem 2010-04-23 15:35:11 -07:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc.c omap2/3/4: gpmc: kill compile warning 2010-02-15 10:03:33 -08:00
hsmmc.c omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
hsmmc.h omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
i2c.c omap: i2c: Fix muxing for command line enabled bus 2010-02-25 14:45:08 -08:00
id.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
io.c OMAP4: fix temporary hacks that break multi-omap PM 2010-03-11 15:55:43 -08:00
iommu2.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
irq.c OMAP2/3: IRQ: ensure valid base address 2010-02-03 08:48:06 -08:00
Kconfig omap: Devkit8000: Add missing package selection 2010-04-23 15:37:24 -07:00
mailbox.c omap2/3/4: mailbox: remove compiler warning 2010-03-11 14:50:00 -08:00
Makefile omap4: Fix build break by moving omap_smc1 into a separate .S 2010-03-11 09:38:53 -08:00
Makefile.boot [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx 2005-11-10 14:26:51 +00:00
mcbsp.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
mux34xx.c omap: Fix 3630 mux errors 2010-02-03 08:48:06 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
mux.h omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3 2010-02-15 09:27:02 -08:00
omap3-iommu.c omap: iommu: reorganize 2009-11-22 10:24:32 -08:00
omap44xx-smc.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap_hwmod_3xxx_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_2420_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_2430_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod.c OMAP: HWMOD: Adding clockdomain check 2010-03-31 04:16:29 -06:00
omap-headsmp.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap-smp.c OMAP4: Remove the secondary wait loop 2009-12-11 16:16:35 -08:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm24xx.c OMAP clockdomains: add usecounting for wakeup and sleep dependencies 2010-01-26 20:13:01 -07:00
pm34xx.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
pm-debug.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
pm.h OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
powerdomain.c OMAP4: prcm: Use logical OR instead of bitwise OR 2010-03-31 04:16:30 -06:00
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure 2010-02-24 12:05:50 -07:00
powerdomains44xx.h ARM: OMAP4: PM: Add the Autogenerated OMAP4 specific power domain framework. 2010-01-26 20:12:52 -07:00
powerdomains.h OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs 2010-01-29 10:14:23 -07:00
prcm-common.h ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up. 2010-01-26 20:12:51 -07:00
prcm.c OMAP4: prcm: Use logical OR instead of bitwise OR 2010-03-31 04:16:30 -06:00
prm44xx.h OMAP4: PRCM: Fix the base address for CHIRONSS reg defines 2010-01-20 13:35:27 -07:00
prm-regbits-24xx.h ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains 2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h OMAP3: PM: Enable IO-CHAIN wakeup 2009-11-11 14:42:28 -08:00
prm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
prm.h ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up. 2010-01-26 20:12:51 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
serial.c omap2/3/4: serial: Remove condition for getting uart4_phys 2010-03-15 16:34:16 -05:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP3: PM: Added support for L2 aux ctrl register save and restore 2010-02-23 11:05:07 -08:00
sram34xx.S OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c OMAP4: clock: Remove clock hacks from timer-gp.c 2010-02-24 17:45:17 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
usb-musb.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-tusb6010.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00