linux_dsm_epyc7002/drivers/mmc
Doug Anderson 9623b5b919 mmc: dw_mmc: Disable low power mode if SDIO interrupts are used
The documentation for the dw_mmc part says that the low power
mode should normally only be set for MMC and SD memory and should
be turned off for SDIO cards that need interrupts detected.

The best place I could find to do this is when the SDIO interrupt
was first enabled.  I rely on the fact that dw_mci_setup_bus()
will be called when it's time to reenable.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04 13:58:10 -04:00
..
card mmc: block: replace __blk_end_request() with blk_end_request() 2012-07-10 23:04:05 -04:00
core mmc: core: reset signal voltage on power up 2012-07-22 15:25:53 -04:00
host mmc: dw_mmc: Disable low power mode if SDIO interrupts are used 2012-09-04 13:58:10 -04:00
Kconfig mmc: explicitly mention SDIO support in Kconfig 2008-10-12 11:04:36 +02:00
Makefile mmc: sdhci-pci: add platform data 2012-01-11 23:58:47 -05:00