mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:16:49 +07:00
90f7976880
A bunch of USB gadget drivers where never ported from the linux 2.4 series to 2.6 kernels. However there's some code still in the tree for them which isn't used and is probably untested for ages. As the chance of these drivers being forward ported is probably quite small now it might be time to get rid of them. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1608 lines
40 KiB
C
1608 lines
40 KiB
C
/*
|
|
* printer.c -- Printer gadget driver
|
|
*
|
|
* Copyright (C) 2003-2005 David Brownell
|
|
* Copyright (C) 2006 Craig W. Nadler
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/utsname.h>
|
|
#include <linux/device.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/cdev.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <asm/system.h>
|
|
#include <linux/uaccess.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/g_printer.h>
|
|
|
|
#include "gadget_chips.h"
|
|
|
|
|
|
/*
|
|
* Kbuild is not very cooperative with respect to linking separately
|
|
* compiled library objects into one module. So for now we won't use
|
|
* separate compilation ... ensuring init/exit sections work to shrink
|
|
* the runtime footprint, and giving us at least some parts of what
|
|
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
|
|
*/
|
|
#include "usbstring.c"
|
|
#include "config.c"
|
|
#include "epautoconf.c"
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define DRIVER_DESC "Printer Gadget"
|
|
#define DRIVER_VERSION "2007 OCT 06"
|
|
|
|
static const char shortname [] = "printer";
|
|
static const char driver_desc [] = DRIVER_DESC;
|
|
|
|
static dev_t g_printer_devno;
|
|
|
|
static struct class *usb_gadget_class;
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
struct printer_dev {
|
|
spinlock_t lock; /* lock this structure */
|
|
/* lock buffer lists during read/write calls */
|
|
spinlock_t lock_printer_io;
|
|
struct usb_gadget *gadget;
|
|
struct usb_request *req; /* for control responses */
|
|
u8 config;
|
|
s8 interface;
|
|
struct usb_ep *in_ep, *out_ep;
|
|
const struct usb_endpoint_descriptor
|
|
*in, *out;
|
|
struct list_head rx_reqs; /* List of free RX structs */
|
|
struct list_head rx_reqs_active; /* List of Active RX xfers */
|
|
struct list_head rx_buffers; /* List of completed xfers */
|
|
/* wait until there is data to be read. */
|
|
wait_queue_head_t rx_wait;
|
|
struct list_head tx_reqs; /* List of free TX structs */
|
|
struct list_head tx_reqs_active; /* List of Active TX xfers */
|
|
/* Wait until there are write buffers available to use. */
|
|
wait_queue_head_t tx_wait;
|
|
/* Wait until all write buffers have been sent. */
|
|
wait_queue_head_t tx_flush_wait;
|
|
struct usb_request *current_rx_req;
|
|
size_t current_rx_bytes;
|
|
u8 *current_rx_buf;
|
|
u8 printer_status;
|
|
u8 reset_printer;
|
|
struct cdev printer_cdev;
|
|
struct device *pdev;
|
|
u8 printer_cdev_open;
|
|
wait_queue_head_t wait;
|
|
};
|
|
|
|
static struct printer_dev usb_printer_gadget;
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
|
|
* Instead: allocate your own, using normal USB-IF procedures.
|
|
*/
|
|
|
|
/* Thanks to NetChip Technologies for donating this product ID.
|
|
*/
|
|
#define PRINTER_VENDOR_NUM 0x0525 /* NetChip */
|
|
#define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */
|
|
|
|
/* Some systems will want different product identifers published in the
|
|
* device descriptor, either numbers or strings or both. These string
|
|
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
|
|
*/
|
|
|
|
static ushort __initdata idVendor;
|
|
module_param(idVendor, ushort, S_IRUGO);
|
|
MODULE_PARM_DESC(idVendor, "USB Vendor ID");
|
|
|
|
static ushort __initdata idProduct;
|
|
module_param(idProduct, ushort, S_IRUGO);
|
|
MODULE_PARM_DESC(idProduct, "USB Product ID");
|
|
|
|
static ushort __initdata bcdDevice;
|
|
module_param(bcdDevice, ushort, S_IRUGO);
|
|
MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
|
|
|
|
static char *__initdata iManufacturer;
|
|
module_param(iManufacturer, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
|
|
|
|
static char *__initdata iProduct;
|
|
module_param(iProduct, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(iProduct, "USB Product string");
|
|
|
|
static char *__initdata iSerialNum;
|
|
module_param(iSerialNum, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(iSerialNum, "1");
|
|
|
|
static char *__initdata iPNPstring;
|
|
module_param(iPNPstring, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
|
|
|
|
/* Number of requests to allocate per endpoint, not used for ep0. */
|
|
static unsigned qlen = 10;
|
|
module_param(qlen, uint, S_IRUGO|S_IWUSR);
|
|
|
|
#define QLEN qlen
|
|
|
|
#ifdef CONFIG_USB_GADGET_DUALSPEED
|
|
#define DEVSPEED USB_SPEED_HIGH
|
|
#else /* full speed (low speed doesn't do bulk) */
|
|
#define DEVSPEED USB_SPEED_FULL
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define xprintk(d, level, fmt, args...) \
|
|
printk(level "%s: " fmt, DRIVER_DESC, ## args)
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(dev, fmt, args...) \
|
|
xprintk(dev, KERN_DEBUG, fmt, ## args)
|
|
#else
|
|
#define DBG(dev, fmt, args...) \
|
|
do { } while (0)
|
|
#endif /* DEBUG */
|
|
|
|
#ifdef VERBOSE
|
|
#define VDBG(dev, fmt, args...) \
|
|
xprintk(dev, KERN_DEBUG, fmt, ## args)
|
|
#else
|
|
#define VDBG(dev, fmt, args...) \
|
|
do { } while (0)
|
|
#endif /* VERBOSE */
|
|
|
|
#define ERROR(dev, fmt, args...) \
|
|
xprintk(dev, KERN_ERR, fmt, ## args)
|
|
#define WARNING(dev, fmt, args...) \
|
|
xprintk(dev, KERN_WARNING, fmt, ## args)
|
|
#define INFO(dev, fmt, args...) \
|
|
xprintk(dev, KERN_INFO, fmt, ## args)
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
|
|
* ep0 implementation: descriptors, config management, setup().
|
|
* also optional class-specific notification interrupt transfer.
|
|
*/
|
|
|
|
/*
|
|
* DESCRIPTORS ... most are static, but strings and (full) configuration
|
|
* descriptors are built on demand.
|
|
*/
|
|
|
|
#define STRING_MANUFACTURER 1
|
|
#define STRING_PRODUCT 2
|
|
#define STRING_SERIALNUM 3
|
|
|
|
/* holds our biggest descriptor */
|
|
#define USB_DESC_BUFSIZE 256
|
|
#define USB_BUFSIZE 8192
|
|
|
|
/* This device advertises one configuration. */
|
|
#define DEV_CONFIG_VALUE 1
|
|
#define PRINTER_INTERFACE 0
|
|
|
|
static struct usb_device_descriptor device_desc = {
|
|
.bLength = sizeof device_desc,
|
|
.bDescriptorType = USB_DT_DEVICE,
|
|
.bcdUSB = cpu_to_le16(0x0200),
|
|
.bDeviceClass = USB_CLASS_PER_INTERFACE,
|
|
.bDeviceSubClass = 0,
|
|
.bDeviceProtocol = 0,
|
|
.idVendor = cpu_to_le16(PRINTER_VENDOR_NUM),
|
|
.idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM),
|
|
.iManufacturer = STRING_MANUFACTURER,
|
|
.iProduct = STRING_PRODUCT,
|
|
.iSerialNumber = STRING_SERIALNUM,
|
|
.bNumConfigurations = 1
|
|
};
|
|
|
|
static struct usb_otg_descriptor otg_desc = {
|
|
.bLength = sizeof otg_desc,
|
|
.bDescriptorType = USB_DT_OTG,
|
|
.bmAttributes = USB_OTG_SRP
|
|
};
|
|
|
|
static struct usb_config_descriptor config_desc = {
|
|
.bLength = sizeof config_desc,
|
|
.bDescriptorType = USB_DT_CONFIG,
|
|
|
|
/* compute wTotalLength on the fly */
|
|
.bNumInterfaces = 1,
|
|
.bConfigurationValue = DEV_CONFIG_VALUE,
|
|
.iConfiguration = 0,
|
|
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
|
|
.bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
|
|
};
|
|
|
|
static struct usb_interface_descriptor intf_desc = {
|
|
.bLength = sizeof intf_desc,
|
|
.bDescriptorType = USB_DT_INTERFACE,
|
|
.bInterfaceNumber = PRINTER_INTERFACE,
|
|
.bNumEndpoints = 2,
|
|
.bInterfaceClass = USB_CLASS_PRINTER,
|
|
.bInterfaceSubClass = 1, /* Printer Sub-Class */
|
|
.bInterfaceProtocol = 2, /* Bi-Directional */
|
|
.iInterface = 0
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor fs_ep_in_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_IN,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor fs_ep_out_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_OUT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK
|
|
};
|
|
|
|
static const struct usb_descriptor_header *fs_printer_function [11] = {
|
|
(struct usb_descriptor_header *) &otg_desc,
|
|
(struct usb_descriptor_header *) &intf_desc,
|
|
(struct usb_descriptor_header *) &fs_ep_in_desc,
|
|
(struct usb_descriptor_header *) &fs_ep_out_desc,
|
|
NULL
|
|
};
|
|
|
|
#ifdef CONFIG_USB_GADGET_DUALSPEED
|
|
|
|
/*
|
|
* usb 2.0 devices need to expose both high speed and full speed
|
|
* descriptors, unless they only run at full speed.
|
|
*/
|
|
|
|
static struct usb_endpoint_descriptor hs_ep_in_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(512)
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor hs_ep_out_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(512)
|
|
};
|
|
|
|
static struct usb_qualifier_descriptor dev_qualifier = {
|
|
.bLength = sizeof dev_qualifier,
|
|
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
|
|
.bcdUSB = cpu_to_le16(0x0200),
|
|
.bDeviceClass = USB_CLASS_PRINTER,
|
|
.bNumConfigurations = 1
|
|
};
|
|
|
|
static const struct usb_descriptor_header *hs_printer_function [11] = {
|
|
(struct usb_descriptor_header *) &otg_desc,
|
|
(struct usb_descriptor_header *) &intf_desc,
|
|
(struct usb_descriptor_header *) &hs_ep_in_desc,
|
|
(struct usb_descriptor_header *) &hs_ep_out_desc,
|
|
NULL
|
|
};
|
|
|
|
/* maxpacket and other transfer characteristics vary by speed. */
|
|
#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs))
|
|
|
|
#else
|
|
|
|
/* if there's no high speed support, maxpacket doesn't change. */
|
|
#define ep_desc(g, hs, fs) (((void)(g)), (fs))
|
|
|
|
#endif /* !CONFIG_USB_GADGET_DUALSPEED */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* descriptors that are built on-demand */
|
|
|
|
static char manufacturer [50];
|
|
static char product_desc [40] = DRIVER_DESC;
|
|
static char serial_num [40] = "1";
|
|
static char pnp_string [1024] =
|
|
"XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
|
|
|
|
/* static strings, in UTF-8 */
|
|
static struct usb_string strings [] = {
|
|
{ STRING_MANUFACTURER, manufacturer, },
|
|
{ STRING_PRODUCT, product_desc, },
|
|
{ STRING_SERIALNUM, serial_num, },
|
|
{ } /* end of list */
|
|
};
|
|
|
|
static struct usb_gadget_strings stringtab = {
|
|
.language = 0x0409, /* en-us */
|
|
.strings = strings,
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct usb_request *
|
|
printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
|
|
{
|
|
struct usb_request *req;
|
|
|
|
req = usb_ep_alloc_request(ep, gfp_flags);
|
|
|
|
if (req != NULL) {
|
|
req->length = len;
|
|
req->buf = kmalloc(len, gfp_flags);
|
|
if (req->buf == NULL) {
|
|
usb_ep_free_request(ep, req);
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
return req;
|
|
}
|
|
|
|
static void
|
|
printer_req_free(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
if (ep != NULL && req != NULL) {
|
|
kfree(req->buf);
|
|
usb_ep_free_request(ep, req);
|
|
}
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void rx_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct printer_dev *dev = ep->driver_data;
|
|
int status = req->status;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
list_del_init(&req->list); /* Remode from Active List */
|
|
|
|
switch (status) {
|
|
|
|
/* normal completion */
|
|
case 0:
|
|
if (req->actual > 0) {
|
|
list_add_tail(&req->list, &dev->rx_buffers);
|
|
DBG(dev, "G_Printer : rx length %d\n", req->actual);
|
|
} else {
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
}
|
|
break;
|
|
|
|
/* software-driven interface shutdown */
|
|
case -ECONNRESET: /* unlink */
|
|
case -ESHUTDOWN: /* disconnect etc */
|
|
VDBG(dev, "rx shutdown, code %d\n", status);
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
break;
|
|
|
|
/* for hardware automagic (such as pxa) */
|
|
case -ECONNABORTED: /* endpoint reset */
|
|
DBG(dev, "rx %s reset\n", ep->name);
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
break;
|
|
|
|
/* data overrun */
|
|
case -EOVERFLOW:
|
|
/* FALLTHROUGH */
|
|
|
|
default:
|
|
DBG(dev, "rx status %d\n", status);
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
break;
|
|
}
|
|
|
|
wake_up_interruptible(&dev->rx_wait);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
}
|
|
|
|
static void tx_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct printer_dev *dev = ep->driver_data;
|
|
|
|
switch (req->status) {
|
|
default:
|
|
VDBG(dev, "tx err %d\n", req->status);
|
|
/* FALLTHROUGH */
|
|
case -ECONNRESET: /* unlink */
|
|
case -ESHUTDOWN: /* disconnect etc */
|
|
break;
|
|
case 0:
|
|
break;
|
|
}
|
|
|
|
spin_lock(&dev->lock);
|
|
/* Take the request struct off the active list and put it on the
|
|
* free list.
|
|
*/
|
|
list_del_init(&req->list);
|
|
list_add(&req->list, &dev->tx_reqs);
|
|
wake_up_interruptible(&dev->tx_wait);
|
|
if (likely(list_empty(&dev->tx_reqs_active)))
|
|
wake_up_interruptible(&dev->tx_flush_wait);
|
|
|
|
spin_unlock(&dev->lock);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
printer_open(struct inode *inode, struct file *fd)
|
|
{
|
|
struct printer_dev *dev;
|
|
unsigned long flags;
|
|
int ret = -EBUSY;
|
|
|
|
lock_kernel();
|
|
dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
if (!dev->printer_cdev_open) {
|
|
dev->printer_cdev_open = 1;
|
|
fd->private_data = dev;
|
|
ret = 0;
|
|
/* Change the printer status to show that it's on-line. */
|
|
dev->printer_status |= PRINTER_SELECTED;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
DBG(dev, "printer_open returned %x\n", ret);
|
|
unlock_kernel();
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
printer_close(struct inode *inode, struct file *fd)
|
|
{
|
|
struct printer_dev *dev = fd->private_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
dev->printer_cdev_open = 0;
|
|
fd->private_data = NULL;
|
|
/* Change printer status to show that the printer is off-line. */
|
|
dev->printer_status &= ~PRINTER_SELECTED;
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
DBG(dev, "printer_close\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function must be called with interrupts turned off. */
|
|
static void
|
|
setup_rx_reqs(struct printer_dev *dev)
|
|
{
|
|
struct usb_request *req;
|
|
|
|
while (likely(!list_empty(&dev->rx_reqs))) {
|
|
int error;
|
|
|
|
req = container_of(dev->rx_reqs.next,
|
|
struct usb_request, list);
|
|
list_del_init(&req->list);
|
|
|
|
/* The USB Host sends us whatever amount of data it wants to
|
|
* so we always set the length field to the full USB_BUFSIZE.
|
|
* If the amount of data is more than the read() caller asked
|
|
* for it will be stored in the request buffer until it is
|
|
* asked for by read().
|
|
*/
|
|
req->length = USB_BUFSIZE;
|
|
req->complete = rx_complete;
|
|
|
|
error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
|
|
if (error) {
|
|
DBG(dev, "rx submit --> %d\n", error);
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
break;
|
|
} else {
|
|
list_add(&req->list, &dev->rx_reqs_active);
|
|
}
|
|
}
|
|
}
|
|
|
|
static ssize_t
|
|
printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
|
|
{
|
|
struct printer_dev *dev = fd->private_data;
|
|
unsigned long flags;
|
|
size_t size;
|
|
size_t bytes_copied;
|
|
struct usb_request *req;
|
|
/* This is a pointer to the current USB rx request. */
|
|
struct usb_request *current_rx_req;
|
|
/* This is the number of bytes in the current rx buffer. */
|
|
size_t current_rx_bytes;
|
|
/* This is a pointer to the current rx buffer. */
|
|
u8 *current_rx_buf;
|
|
|
|
if (len == 0)
|
|
return -EINVAL;
|
|
|
|
DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
|
|
|
|
spin_lock(&dev->lock_printer_io);
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* We will use this flag later to check if a printer reset happened
|
|
* after we turn interrupts back on.
|
|
*/
|
|
dev->reset_printer = 0;
|
|
|
|
setup_rx_reqs(dev);
|
|
|
|
bytes_copied = 0;
|
|
current_rx_req = dev->current_rx_req;
|
|
current_rx_bytes = dev->current_rx_bytes;
|
|
current_rx_buf = dev->current_rx_buf;
|
|
dev->current_rx_req = NULL;
|
|
dev->current_rx_bytes = 0;
|
|
dev->current_rx_buf = NULL;
|
|
|
|
/* Check if there is any data in the read buffers. Please note that
|
|
* current_rx_bytes is the number of bytes in the current rx buffer.
|
|
* If it is zero then check if there are any other rx_buffers that
|
|
* are on the completed list. We are only out of data if all rx
|
|
* buffers are empty.
|
|
*/
|
|
if ((current_rx_bytes == 0) &&
|
|
(likely(list_empty(&dev->rx_buffers)))) {
|
|
/* Turn interrupts back on before sleeping. */
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
/*
|
|
* If no data is available check if this is a NON-Blocking
|
|
* call or not.
|
|
*/
|
|
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
|
|
spin_unlock(&dev->lock_printer_io);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Sleep until data is available */
|
|
wait_event_interruptible(dev->rx_wait,
|
|
(likely(!list_empty(&dev->rx_buffers))));
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
}
|
|
|
|
/* We have data to return then copy it to the caller's buffer.*/
|
|
while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
|
|
&& len) {
|
|
if (current_rx_bytes == 0) {
|
|
req = container_of(dev->rx_buffers.next,
|
|
struct usb_request, list);
|
|
list_del_init(&req->list);
|
|
|
|
if (req->actual && req->buf) {
|
|
current_rx_req = req;
|
|
current_rx_bytes = req->actual;
|
|
current_rx_buf = req->buf;
|
|
} else {
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* Don't leave irqs off while doing memory copies */
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
if (len > current_rx_bytes)
|
|
size = current_rx_bytes;
|
|
else
|
|
size = len;
|
|
|
|
size -= copy_to_user(buf, current_rx_buf, size);
|
|
bytes_copied += size;
|
|
len -= size;
|
|
buf += size;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* We've disconnected or reset so return. */
|
|
if (dev->reset_printer) {
|
|
list_add(¤t_rx_req->list, &dev->rx_reqs);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
spin_unlock(&dev->lock_printer_io);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* If we not returning all the data left in this RX request
|
|
* buffer then adjust the amount of data left in the buffer.
|
|
* Othewise if we are done with this RX request buffer then
|
|
* requeue it to get any incoming data from the USB host.
|
|
*/
|
|
if (size < current_rx_bytes) {
|
|
current_rx_bytes -= size;
|
|
current_rx_buf += size;
|
|
} else {
|
|
list_add(¤t_rx_req->list, &dev->rx_reqs);
|
|
current_rx_bytes = 0;
|
|
current_rx_buf = NULL;
|
|
current_rx_req = NULL;
|
|
}
|
|
}
|
|
|
|
dev->current_rx_req = current_rx_req;
|
|
dev->current_rx_bytes = current_rx_bytes;
|
|
dev->current_rx_buf = current_rx_buf;
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
spin_unlock(&dev->lock_printer_io);
|
|
|
|
DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
|
|
|
|
if (bytes_copied)
|
|
return bytes_copied;
|
|
else
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static ssize_t
|
|
printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
|
|
{
|
|
struct printer_dev *dev = fd->private_data;
|
|
unsigned long flags;
|
|
size_t size; /* Amount of data in a TX request. */
|
|
size_t bytes_copied = 0;
|
|
struct usb_request *req;
|
|
|
|
DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
|
|
|
|
if (len == 0)
|
|
return -EINVAL;
|
|
|
|
spin_lock(&dev->lock_printer_io);
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* Check if a printer reset happens while we have interrupts on */
|
|
dev->reset_printer = 0;
|
|
|
|
/* Check if there is any available write buffers */
|
|
if (likely(list_empty(&dev->tx_reqs))) {
|
|
/* Turn interrupts back on before sleeping. */
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
/*
|
|
* If write buffers are available check if this is
|
|
* a NON-Blocking call or not.
|
|
*/
|
|
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
|
|
spin_unlock(&dev->lock_printer_io);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Sleep until a write buffer is available */
|
|
wait_event_interruptible(dev->tx_wait,
|
|
(likely(!list_empty(&dev->tx_reqs))));
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
}
|
|
|
|
while (likely(!list_empty(&dev->tx_reqs)) && len) {
|
|
|
|
if (len > USB_BUFSIZE)
|
|
size = USB_BUFSIZE;
|
|
else
|
|
size = len;
|
|
|
|
req = container_of(dev->tx_reqs.next, struct usb_request,
|
|
list);
|
|
list_del_init(&req->list);
|
|
|
|
req->complete = tx_complete;
|
|
req->length = size;
|
|
|
|
/* Check if we need to send a zero length packet. */
|
|
if (len > size)
|
|
/* They will be more TX requests so no yet. */
|
|
req->zero = 0;
|
|
else
|
|
/* If the data amount is not a multple of the
|
|
* maxpacket size then send a zero length packet.
|
|
*/
|
|
req->zero = ((len % dev->in_ep->maxpacket) == 0);
|
|
|
|
/* Don't leave irqs off while doing memory copies */
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
if (copy_from_user(req->buf, buf, size)) {
|
|
list_add(&req->list, &dev->tx_reqs);
|
|
spin_unlock(&dev->lock_printer_io);
|
|
return bytes_copied;
|
|
}
|
|
|
|
bytes_copied += size;
|
|
len -= size;
|
|
buf += size;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* We've disconnected or reset so free the req and buffer */
|
|
if (dev->reset_printer) {
|
|
list_add(&req->list, &dev->tx_reqs);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
spin_unlock(&dev->lock_printer_io);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
|
|
list_add(&req->list, &dev->tx_reqs);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
spin_unlock(&dev->lock_printer_io);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
list_add(&req->list, &dev->tx_reqs_active);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
spin_unlock(&dev->lock_printer_io);
|
|
|
|
DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
|
|
|
|
if (bytes_copied) {
|
|
return bytes_copied;
|
|
} else {
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
static int
|
|
printer_fsync(struct file *fd, struct dentry *dentry, int datasync)
|
|
{
|
|
struct printer_dev *dev = fd->private_data;
|
|
unsigned long flags;
|
|
int tx_list_empty;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
if (!tx_list_empty) {
|
|
/* Sleep until all data has been sent */
|
|
wait_event_interruptible(dev->tx_flush_wait,
|
|
(likely(list_empty(&dev->tx_reqs_active))));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int
|
|
printer_poll(struct file *fd, poll_table *wait)
|
|
{
|
|
struct printer_dev *dev = fd->private_data;
|
|
unsigned long flags;
|
|
int status = 0;
|
|
|
|
spin_lock(&dev->lock_printer_io);
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
setup_rx_reqs(dev);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
spin_unlock(&dev->lock_printer_io);
|
|
|
|
poll_wait(fd, &dev->rx_wait, wait);
|
|
poll_wait(fd, &dev->tx_wait, wait);
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
if (likely(!list_empty(&dev->tx_reqs)))
|
|
status |= POLLOUT | POLLWRNORM;
|
|
|
|
if (likely(dev->current_rx_bytes) ||
|
|
likely(!list_empty(&dev->rx_buffers)))
|
|
status |= POLLIN | POLLRDNORM;
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
static long
|
|
printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
|
|
{
|
|
struct printer_dev *dev = fd->private_data;
|
|
unsigned long flags;
|
|
int status = 0;
|
|
|
|
DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
|
|
|
|
/* handle ioctls */
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
switch (code) {
|
|
case GADGET_GET_PRINTER_STATUS:
|
|
status = (int)dev->printer_status;
|
|
break;
|
|
case GADGET_SET_PRINTER_STATUS:
|
|
dev->printer_status = (u8)arg;
|
|
break;
|
|
default:
|
|
/* could not handle ioctl */
|
|
DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
|
|
code);
|
|
status = -ENOTTY;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* used after endpoint configuration */
|
|
static const struct file_operations printer_io_operations = {
|
|
.owner = THIS_MODULE,
|
|
.open = printer_open,
|
|
.read = printer_read,
|
|
.write = printer_write,
|
|
.fsync = printer_fsync,
|
|
.poll = printer_poll,
|
|
.unlocked_ioctl = printer_ioctl,
|
|
.release = printer_close
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
set_printer_interface(struct printer_dev *dev)
|
|
{
|
|
int result = 0;
|
|
|
|
dev->in = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc);
|
|
dev->in_ep->driver_data = dev;
|
|
|
|
dev->out = ep_desc(dev->gadget, &hs_ep_out_desc, &fs_ep_out_desc);
|
|
dev->out_ep->driver_data = dev;
|
|
|
|
result = usb_ep_enable(dev->in_ep, dev->in);
|
|
if (result != 0) {
|
|
DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
|
|
goto done;
|
|
}
|
|
|
|
result = usb_ep_enable(dev->out_ep, dev->out);
|
|
if (result != 0) {
|
|
DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
/* on error, disable any endpoints */
|
|
if (result != 0) {
|
|
(void) usb_ep_disable(dev->in_ep);
|
|
(void) usb_ep_disable(dev->out_ep);
|
|
dev->in = NULL;
|
|
dev->out = NULL;
|
|
}
|
|
|
|
/* caller is responsible for cleanup on error */
|
|
return result;
|
|
}
|
|
|
|
static void printer_reset_interface(struct printer_dev *dev)
|
|
{
|
|
if (dev->interface < 0)
|
|
return;
|
|
|
|
DBG(dev, "%s\n", __func__);
|
|
|
|
if (dev->in)
|
|
usb_ep_disable(dev->in_ep);
|
|
|
|
if (dev->out)
|
|
usb_ep_disable(dev->out_ep);
|
|
|
|
dev->interface = -1;
|
|
}
|
|
|
|
/* change our operational config. must agree with the code
|
|
* that returns config descriptors, and altsetting code.
|
|
*/
|
|
static int
|
|
printer_set_config(struct printer_dev *dev, unsigned number)
|
|
{
|
|
int result = 0;
|
|
struct usb_gadget *gadget = dev->gadget;
|
|
|
|
switch (number) {
|
|
case DEV_CONFIG_VALUE:
|
|
result = 0;
|
|
break;
|
|
default:
|
|
result = -EINVAL;
|
|
/* FALL THROUGH */
|
|
case 0:
|
|
break;
|
|
}
|
|
|
|
if (result) {
|
|
usb_gadget_vbus_draw(dev->gadget,
|
|
dev->gadget->is_otg ? 8 : 100);
|
|
} else {
|
|
char *speed;
|
|
unsigned power;
|
|
|
|
power = 2 * config_desc.bMaxPower;
|
|
usb_gadget_vbus_draw(dev->gadget, power);
|
|
|
|
switch (gadget->speed) {
|
|
case USB_SPEED_FULL: speed = "full"; break;
|
|
#ifdef CONFIG_USB_GADGET_DUALSPEED
|
|
case USB_SPEED_HIGH: speed = "high"; break;
|
|
#endif
|
|
default: speed = "?"; break;
|
|
}
|
|
|
|
dev->config = number;
|
|
INFO(dev, "%s speed config #%d: %d mA, %s\n",
|
|
speed, number, power, driver_desc);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
static int
|
|
config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index,
|
|
int is_otg)
|
|
{
|
|
int len;
|
|
const struct usb_descriptor_header **function;
|
|
#ifdef CONFIG_USB_GADGET_DUALSPEED
|
|
int hs = (speed == USB_SPEED_HIGH);
|
|
|
|
if (type == USB_DT_OTHER_SPEED_CONFIG)
|
|
hs = !hs;
|
|
|
|
if (hs) {
|
|
function = hs_printer_function;
|
|
} else {
|
|
function = fs_printer_function;
|
|
}
|
|
#else
|
|
function = fs_printer_function;
|
|
#endif
|
|
|
|
if (index >= device_desc.bNumConfigurations)
|
|
return -EINVAL;
|
|
|
|
/* for now, don't advertise srp-only devices */
|
|
if (!is_otg)
|
|
function++;
|
|
|
|
len = usb_gadget_config_buf(&config_desc, buf, USB_DESC_BUFSIZE,
|
|
function);
|
|
if (len < 0)
|
|
return len;
|
|
((struct usb_config_descriptor *) buf)->bDescriptorType = type;
|
|
return len;
|
|
}
|
|
|
|
/* Change our operational Interface. */
|
|
static int
|
|
set_interface(struct printer_dev *dev, unsigned number)
|
|
{
|
|
int result = 0;
|
|
|
|
/* Free the current interface */
|
|
switch (dev->interface) {
|
|
case PRINTER_INTERFACE:
|
|
printer_reset_interface(dev);
|
|
break;
|
|
}
|
|
|
|
switch (number) {
|
|
case PRINTER_INTERFACE:
|
|
result = set_printer_interface(dev);
|
|
if (result) {
|
|
printer_reset_interface(dev);
|
|
} else {
|
|
dev->interface = PRINTER_INTERFACE;
|
|
}
|
|
break;
|
|
default:
|
|
result = -EINVAL;
|
|
/* FALL THROUGH */
|
|
}
|
|
|
|
if (!result)
|
|
INFO(dev, "Using interface %x\n", number);
|
|
|
|
return result;
|
|
}
|
|
|
|
static void printer_setup_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
if (req->status || req->actual != req->length)
|
|
DBG((struct printer_dev *) ep->driver_data,
|
|
"setup complete --> %d, %d/%d\n",
|
|
req->status, req->actual, req->length);
|
|
}
|
|
|
|
static void printer_soft_reset(struct printer_dev *dev)
|
|
{
|
|
struct usb_request *req;
|
|
|
|
INFO(dev, "Received Printer Reset Request\n");
|
|
|
|
if (usb_ep_disable(dev->in_ep))
|
|
DBG(dev, "Failed to disable USB in_ep\n");
|
|
if (usb_ep_disable(dev->out_ep))
|
|
DBG(dev, "Failed to disable USB out_ep\n");
|
|
|
|
if (dev->current_rx_req != NULL) {
|
|
list_add(&dev->current_rx_req->list, &dev->rx_reqs);
|
|
dev->current_rx_req = NULL;
|
|
}
|
|
dev->current_rx_bytes = 0;
|
|
dev->current_rx_buf = NULL;
|
|
dev->reset_printer = 1;
|
|
|
|
while (likely(!(list_empty(&dev->rx_buffers)))) {
|
|
req = container_of(dev->rx_buffers.next, struct usb_request,
|
|
list);
|
|
list_del_init(&req->list);
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
}
|
|
|
|
while (likely(!(list_empty(&dev->rx_reqs_active)))) {
|
|
req = container_of(dev->rx_buffers.next, struct usb_request,
|
|
list);
|
|
list_del_init(&req->list);
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
}
|
|
|
|
while (likely(!(list_empty(&dev->tx_reqs_active)))) {
|
|
req = container_of(dev->tx_reqs_active.next,
|
|
struct usb_request, list);
|
|
list_del_init(&req->list);
|
|
list_add(&req->list, &dev->tx_reqs);
|
|
}
|
|
|
|
if (usb_ep_enable(dev->in_ep, dev->in))
|
|
DBG(dev, "Failed to enable USB in_ep\n");
|
|
if (usb_ep_enable(dev->out_ep, dev->out))
|
|
DBG(dev, "Failed to enable USB out_ep\n");
|
|
|
|
wake_up_interruptible(&dev->rx_wait);
|
|
wake_up_interruptible(&dev->tx_wait);
|
|
wake_up_interruptible(&dev->tx_flush_wait);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* The setup() callback implements all the ep0 functionality that's not
|
|
* handled lower down.
|
|
*/
|
|
static int
|
|
printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct printer_dev *dev = get_gadget_data(gadget);
|
|
struct usb_request *req = dev->req;
|
|
int value = -EOPNOTSUPP;
|
|
u16 wIndex = le16_to_cpu(ctrl->wIndex);
|
|
u16 wValue = le16_to_cpu(ctrl->wValue);
|
|
u16 wLength = le16_to_cpu(ctrl->wLength);
|
|
|
|
DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
|
|
ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
|
|
|
|
req->complete = printer_setup_complete;
|
|
|
|
switch (ctrl->bRequestType&USB_TYPE_MASK) {
|
|
|
|
case USB_TYPE_STANDARD:
|
|
switch (ctrl->bRequest) {
|
|
|
|
case USB_REQ_GET_DESCRIPTOR:
|
|
if (ctrl->bRequestType != USB_DIR_IN)
|
|
break;
|
|
switch (wValue >> 8) {
|
|
|
|
case USB_DT_DEVICE:
|
|
value = min(wLength, (u16) sizeof device_desc);
|
|
memcpy(req->buf, &device_desc, value);
|
|
break;
|
|
#ifdef CONFIG_USB_GADGET_DUALSPEED
|
|
case USB_DT_DEVICE_QUALIFIER:
|
|
if (!gadget->is_dualspeed)
|
|
break;
|
|
value = min(wLength,
|
|
(u16) sizeof dev_qualifier);
|
|
memcpy(req->buf, &dev_qualifier, value);
|
|
break;
|
|
|
|
case USB_DT_OTHER_SPEED_CONFIG:
|
|
if (!gadget->is_dualspeed)
|
|
break;
|
|
/* FALLTHROUGH */
|
|
#endif /* CONFIG_USB_GADGET_DUALSPEED */
|
|
case USB_DT_CONFIG:
|
|
value = config_buf(gadget->speed, req->buf,
|
|
wValue >> 8,
|
|
wValue & 0xff,
|
|
gadget->is_otg);
|
|
if (value >= 0)
|
|
value = min(wLength, (u16) value);
|
|
break;
|
|
|
|
case USB_DT_STRING:
|
|
value = usb_gadget_get_string(&stringtab,
|
|
wValue & 0xff, req->buf);
|
|
if (value >= 0)
|
|
value = min(wLength, (u16) value);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
if (ctrl->bRequestType != 0)
|
|
break;
|
|
if (gadget->a_hnp_support)
|
|
DBG(dev, "HNP available\n");
|
|
else if (gadget->a_alt_hnp_support)
|
|
DBG(dev, "HNP needs a different root port\n");
|
|
value = printer_set_config(dev, wValue);
|
|
break;
|
|
case USB_REQ_GET_CONFIGURATION:
|
|
if (ctrl->bRequestType != USB_DIR_IN)
|
|
break;
|
|
*(u8 *)req->buf = dev->config;
|
|
value = min(wLength, (u16) 1);
|
|
break;
|
|
|
|
case USB_REQ_SET_INTERFACE:
|
|
if (ctrl->bRequestType != USB_RECIP_INTERFACE ||
|
|
!dev->config)
|
|
break;
|
|
|
|
value = set_interface(dev, PRINTER_INTERFACE);
|
|
break;
|
|
case USB_REQ_GET_INTERFACE:
|
|
if (ctrl->bRequestType !=
|
|
(USB_DIR_IN|USB_RECIP_INTERFACE)
|
|
|| !dev->config)
|
|
break;
|
|
|
|
*(u8 *)req->buf = dev->interface;
|
|
value = min(wLength, (u16) 1);
|
|
break;
|
|
|
|
default:
|
|
goto unknown;
|
|
}
|
|
break;
|
|
|
|
case USB_TYPE_CLASS:
|
|
switch (ctrl->bRequest) {
|
|
case 0: /* Get the IEEE-1284 PNP String */
|
|
/* Only one printer interface is supported. */
|
|
if ((wIndex>>8) != PRINTER_INTERFACE)
|
|
break;
|
|
|
|
value = (pnp_string[0]<<8)|pnp_string[1];
|
|
memcpy(req->buf, pnp_string, value);
|
|
DBG(dev, "1284 PNP String: %x %s\n", value,
|
|
&pnp_string[2]);
|
|
break;
|
|
|
|
case 1: /* Get Port Status */
|
|
/* Only one printer interface is supported. */
|
|
if (wIndex != PRINTER_INTERFACE)
|
|
break;
|
|
|
|
*(u8 *)req->buf = dev->printer_status;
|
|
value = min(wLength, (u16) 1);
|
|
break;
|
|
|
|
case 2: /* Soft Reset */
|
|
/* Only one printer interface is supported. */
|
|
if (wIndex != PRINTER_INTERFACE)
|
|
break;
|
|
|
|
printer_soft_reset(dev);
|
|
|
|
value = 0;
|
|
break;
|
|
|
|
default:
|
|
goto unknown;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
unknown:
|
|
VDBG(dev,
|
|
"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
|
|
ctrl->bRequestType, ctrl->bRequest,
|
|
wValue, wIndex, wLength);
|
|
break;
|
|
}
|
|
|
|
/* respond with data transfer before status phase? */
|
|
if (value >= 0) {
|
|
req->length = value;
|
|
req->zero = value < wLength;
|
|
value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
|
|
if (value < 0) {
|
|
DBG(dev, "ep_queue --> %d\n", value);
|
|
req->status = 0;
|
|
printer_setup_complete(gadget->ep0, req);
|
|
}
|
|
}
|
|
|
|
/* host either stalls (value < 0) or reports success */
|
|
return value;
|
|
}
|
|
|
|
static void
|
|
printer_disconnect(struct usb_gadget *gadget)
|
|
{
|
|
struct printer_dev *dev = get_gadget_data(gadget);
|
|
unsigned long flags;
|
|
|
|
DBG(dev, "%s\n", __func__);
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
printer_reset_interface(dev);
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
}
|
|
|
|
static void
|
|
printer_unbind(struct usb_gadget *gadget)
|
|
{
|
|
struct printer_dev *dev = get_gadget_data(gadget);
|
|
struct usb_request *req;
|
|
|
|
|
|
DBG(dev, "%s\n", __func__);
|
|
|
|
/* Remove sysfs files */
|
|
device_destroy(usb_gadget_class, g_printer_devno);
|
|
|
|
/* Remove Character Device */
|
|
cdev_del(&dev->printer_cdev);
|
|
|
|
/* we must already have been disconnected ... no i/o may be active */
|
|
WARN_ON(!list_empty(&dev->tx_reqs_active));
|
|
WARN_ON(!list_empty(&dev->rx_reqs_active));
|
|
|
|
/* Free all memory for this driver. */
|
|
while (!list_empty(&dev->tx_reqs)) {
|
|
req = container_of(dev->tx_reqs.next, struct usb_request,
|
|
list);
|
|
list_del(&req->list);
|
|
printer_req_free(dev->in_ep, req);
|
|
}
|
|
|
|
if (dev->current_rx_req != NULL)
|
|
printer_req_free(dev->out_ep, dev->current_rx_req);
|
|
|
|
while (!list_empty(&dev->rx_reqs)) {
|
|
req = container_of(dev->rx_reqs.next,
|
|
struct usb_request, list);
|
|
list_del(&req->list);
|
|
printer_req_free(dev->out_ep, req);
|
|
}
|
|
|
|
while (!list_empty(&dev->rx_buffers)) {
|
|
req = container_of(dev->rx_buffers.next,
|
|
struct usb_request, list);
|
|
list_del(&req->list);
|
|
printer_req_free(dev->out_ep, req);
|
|
}
|
|
|
|
if (dev->req) {
|
|
printer_req_free(gadget->ep0, dev->req);
|
|
dev->req = NULL;
|
|
}
|
|
|
|
set_gadget_data(gadget, NULL);
|
|
}
|
|
|
|
static int __init
|
|
printer_bind(struct usb_gadget *gadget)
|
|
{
|
|
struct printer_dev *dev;
|
|
struct usb_ep *in_ep, *out_ep;
|
|
int status = -ENOMEM;
|
|
int gcnum;
|
|
size_t len;
|
|
u32 i;
|
|
struct usb_request *req;
|
|
|
|
dev = &usb_printer_gadget;
|
|
|
|
|
|
/* Setup the sysfs files for the printer gadget. */
|
|
dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
|
|
NULL, "g_printer");
|
|
if (IS_ERR(dev->pdev)) {
|
|
ERROR(dev, "Failed to create device: g_printer\n");
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Register a character device as an interface to a user mode
|
|
* program that handles the printer specific functionality.
|
|
*/
|
|
cdev_init(&dev->printer_cdev, &printer_io_operations);
|
|
dev->printer_cdev.owner = THIS_MODULE;
|
|
status = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
|
|
if (status) {
|
|
ERROR(dev, "Failed to open char device\n");
|
|
goto fail;
|
|
}
|
|
|
|
gcnum = usb_gadget_controller_number(gadget);
|
|
if (gcnum >= 0) {
|
|
device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
|
|
} else {
|
|
dev_warn(&gadget->dev, "controller '%s' not recognized\n",
|
|
gadget->name);
|
|
/* unrecognized, but safe unless bulk is REALLY quirky */
|
|
device_desc.bcdDevice =
|
|
cpu_to_le16(0xFFFF);
|
|
}
|
|
snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
|
|
init_utsname()->sysname, init_utsname()->release,
|
|
gadget->name);
|
|
|
|
device_desc.idVendor =
|
|
cpu_to_le16(PRINTER_VENDOR_NUM);
|
|
device_desc.idProduct =
|
|
cpu_to_le16(PRINTER_PRODUCT_NUM);
|
|
|
|
/* support optional vendor/distro customization */
|
|
if (idVendor) {
|
|
if (!idProduct) {
|
|
dev_err(&gadget->dev, "idVendor needs idProduct!\n");
|
|
return -ENODEV;
|
|
}
|
|
device_desc.idVendor = cpu_to_le16(idVendor);
|
|
device_desc.idProduct = cpu_to_le16(idProduct);
|
|
if (bcdDevice)
|
|
device_desc.bcdDevice = cpu_to_le16(bcdDevice);
|
|
}
|
|
|
|
if (iManufacturer)
|
|
strlcpy(manufacturer, iManufacturer, sizeof manufacturer);
|
|
|
|
if (iProduct)
|
|
strlcpy(product_desc, iProduct, sizeof product_desc);
|
|
|
|
if (iSerialNum)
|
|
strlcpy(serial_num, iSerialNum, sizeof serial_num);
|
|
|
|
if (iPNPstring)
|
|
strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
|
|
|
|
len = strlen(pnp_string);
|
|
pnp_string[0] = (len >> 8) & 0xFF;
|
|
pnp_string[1] = len & 0xFF;
|
|
|
|
/* all we really need is bulk IN/OUT */
|
|
usb_ep_autoconfig_reset(gadget);
|
|
in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
|
|
if (!in_ep) {
|
|
autoconf_fail:
|
|
dev_err(&gadget->dev, "can't autoconfigure on %s\n",
|
|
gadget->name);
|
|
return -ENODEV;
|
|
}
|
|
in_ep->driver_data = in_ep; /* claim */
|
|
|
|
out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
|
|
if (!out_ep)
|
|
goto autoconf_fail;
|
|
out_ep->driver_data = out_ep; /* claim */
|
|
|
|
#ifdef CONFIG_USB_GADGET_DUALSPEED
|
|
/* assumes ep0 uses the same value for both speeds ... */
|
|
dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
|
|
|
|
/* and that all endpoints are dual-speed */
|
|
hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
|
|
hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
|
|
#endif /* DUALSPEED */
|
|
|
|
device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
|
|
usb_gadget_set_selfpowered(gadget);
|
|
|
|
if (gadget->is_otg) {
|
|
otg_desc.bmAttributes |= USB_OTG_HNP,
|
|
config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
|
|
}
|
|
|
|
spin_lock_init(&dev->lock);
|
|
spin_lock_init(&dev->lock_printer_io);
|
|
INIT_LIST_HEAD(&dev->tx_reqs);
|
|
INIT_LIST_HEAD(&dev->tx_reqs_active);
|
|
INIT_LIST_HEAD(&dev->rx_reqs);
|
|
INIT_LIST_HEAD(&dev->rx_reqs_active);
|
|
INIT_LIST_HEAD(&dev->rx_buffers);
|
|
init_waitqueue_head(&dev->rx_wait);
|
|
init_waitqueue_head(&dev->tx_wait);
|
|
init_waitqueue_head(&dev->tx_flush_wait);
|
|
|
|
dev->config = 0;
|
|
dev->interface = -1;
|
|
dev->printer_cdev_open = 0;
|
|
dev->printer_status = PRINTER_NOT_ERROR;
|
|
dev->current_rx_req = NULL;
|
|
dev->current_rx_bytes = 0;
|
|
dev->current_rx_buf = NULL;
|
|
|
|
dev->in_ep = in_ep;
|
|
dev->out_ep = out_ep;
|
|
|
|
/* preallocate control message data and buffer */
|
|
dev->req = printer_req_alloc(gadget->ep0, USB_DESC_BUFSIZE,
|
|
GFP_KERNEL);
|
|
if (!dev->req) {
|
|
status = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < QLEN; i++) {
|
|
req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
|
|
if (!req) {
|
|
while (!list_empty(&dev->tx_reqs)) {
|
|
req = container_of(dev->tx_reqs.next,
|
|
struct usb_request, list);
|
|
list_del(&req->list);
|
|
printer_req_free(dev->in_ep, req);
|
|
}
|
|
return -ENOMEM;
|
|
}
|
|
list_add(&req->list, &dev->tx_reqs);
|
|
}
|
|
|
|
for (i = 0; i < QLEN; i++) {
|
|
req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
|
|
if (!req) {
|
|
while (!list_empty(&dev->rx_reqs)) {
|
|
req = container_of(dev->rx_reqs.next,
|
|
struct usb_request, list);
|
|
list_del(&req->list);
|
|
printer_req_free(dev->out_ep, req);
|
|
}
|
|
return -ENOMEM;
|
|
}
|
|
list_add(&req->list, &dev->rx_reqs);
|
|
}
|
|
|
|
dev->req->complete = printer_setup_complete;
|
|
|
|
/* finish hookup to lower layer ... */
|
|
dev->gadget = gadget;
|
|
set_gadget_data(gadget, dev);
|
|
gadget->ep0->driver_data = dev;
|
|
|
|
INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
|
|
INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
|
|
in_ep->name);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
printer_unbind(gadget);
|
|
return status;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct usb_gadget_driver printer_driver = {
|
|
.speed = DEVSPEED,
|
|
|
|
.function = (char *) driver_desc,
|
|
.bind = printer_bind,
|
|
.unbind = printer_unbind,
|
|
|
|
.setup = printer_setup,
|
|
.disconnect = printer_disconnect,
|
|
|
|
.driver = {
|
|
.name = (char *) shortname,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR("Craig Nadler");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int __init
|
|
init(void)
|
|
{
|
|
int status;
|
|
|
|
usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
|
|
if (IS_ERR(usb_gadget_class)) {
|
|
status = PTR_ERR(usb_gadget_class);
|
|
ERROR(dev, "unable to create usb_gadget class %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
status = alloc_chrdev_region(&g_printer_devno, 0, 1,
|
|
"USB printer gadget");
|
|
if (status) {
|
|
ERROR(dev, "alloc_chrdev_region %d\n", status);
|
|
class_destroy(usb_gadget_class);
|
|
return status;
|
|
}
|
|
|
|
status = usb_gadget_register_driver(&printer_driver);
|
|
if (status) {
|
|
class_destroy(usb_gadget_class);
|
|
unregister_chrdev_region(g_printer_devno, 1);
|
|
DBG(dev, "usb_gadget_register_driver %x\n", status);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
module_init(init);
|
|
|
|
static void __exit
|
|
cleanup(void)
|
|
{
|
|
int status;
|
|
|
|
spin_lock(&usb_printer_gadget.lock_printer_io);
|
|
class_destroy(usb_gadget_class);
|
|
unregister_chrdev_region(g_printer_devno, 2);
|
|
|
|
status = usb_gadget_unregister_driver(&printer_driver);
|
|
if (status)
|
|
ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
|
|
|
|
spin_unlock(&usb_printer_gadget.lock_printer_io);
|
|
}
|
|
module_exit(cleanup);
|