AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-25 17:25:07 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
95d61a6780
linux_dsm_epyc7002/drivers/iio/accel/stk8ba50.c
Lars-Peter Clausen f11d59d87b iio: Move attach/detach of the poll func to the core 
All devices using a triggered buffer need to attach and detach the trigger
to the device in order to properly work. Instead of doing this in each and
every driver by hand move this into the core.

At this point in time, all drivers should have been resolved to
attach/detach the poll-function in the same order.

This patch removes all explicit calls of iio_triggered_buffer_postenable()
& iio_triggered_buffer_predisable() in all drivers, since the core handles
now the pollfunc attach/detach.

The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's
not immediately obvious that removing the hooks doesn't break anything.
Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board.
All seems to be fine.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-20 17:34:44 +01:00

563 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/**
* Sensortek STK8BA50 3-Axis Accelerometer
*
* Copyright (c) 2015, Intel Corporation.
*
* STK8BA50 7-bit I2C address: 0x18.
*/
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#define STK8BA50_REG_XOUT 0x02
#define STK8BA50_REG_YOUT 0x04
#define STK8BA50_REG_ZOUT 0x06
#define STK8BA50_REG_RANGE 0x0F
#define STK8BA50_REG_BWSEL 0x10
#define STK8BA50_REG_POWMODE 0x11
#define STK8BA50_REG_SWRST 0x14
#define STK8BA50_REG_INTEN2 0x17
#define STK8BA50_REG_INTMAP2 0x1A
#define STK8BA50_MODE_NORMAL 0
#define STK8BA50_MODE_SUSPEND 1
#define STK8BA50_MODE_POWERBIT BIT(7)
#define STK8BA50_DATA_SHIFT 6
#define STK8BA50_RESET_CMD 0xB6
#define STK8BA50_SR_1792HZ_IDX 7
#define STK8BA50_DREADY_INT_MASK 0x10
#define STK8BA50_DREADY_INT_MAP 0x81
#define STK8BA50_ALL_CHANNEL_MASK 7
#define STK8BA50_ALL_CHANNEL_SIZE 6
#define STK8BA50_DRIVER_NAME "stk8ba50"
#define STK8BA50_IRQ_NAME "stk8ba50_event"
#define STK8BA50_SCALE_AVAIL "0.0384 0.0767 0.1534 0.3069"
/*
* The accelerometer has four measurement ranges:
* +/-2g; +/-4g; +/-8g; +/-16g
*
* Acceleration values are 10-bit, 2's complement.
* Scales are calculated as following:
*
* scale1 = (2 + 2) * 9.81 / (2^10 - 1) = 0.0384
* scale2 = (4 + 4) * 9.81 / (2^10 - 1) = 0.0767
* etc.
*
* Scales are stored in this format:
* { <register value>, <scale value> }
*
* Locally, the range is stored as a table index.
*/
static const struct {
u8 reg_val;
u32 scale_val;
} stk8ba50_scale_table[] = {
{3, 38400}, {5, 76700}, {8, 153400}, {12, 306900}
};
/* Sample rates are stored as { <register value>, <Hz value> } */
static const struct {
u8 reg_val;
u16 samp_freq;
} stk8ba50_samp_freq_table[] = {
{0x08, 14}, {0x09, 25}, {0x0A, 56}, {0x0B, 112},
{0x0C, 224}, {0x0D, 448}, {0x0E, 896}, {0x0F, 1792}
};
/* Used to map scan mask bits to their corresponding channel register. */
static const int stk8ba50_channel_table[] = {
STK8BA50_REG_XOUT,
STK8BA50_REG_YOUT,
STK8BA50_REG_ZOUT
};
struct stk8ba50_data {
struct i2c_client *client;
struct mutex lock;
int range;
u8 sample_rate_idx;
struct iio_trigger *dready_trig;
bool dready_trigger_on;
/*
* 3 x 16-bit channels (10-bit data, 6-bit padding) +
* 1 x 16 padding +
* 4 x 16 64-bit timestamp
*/
s16 buffer[8];
};
#define STK8BA50_ACCEL_CHANNEL(index, reg, axis) { \
.type = IIO_ACCEL, \
.address = reg, \
.modified = 1, \
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = index, \
.scan_type = { \
.sign = 's', \
.realbits = 10, \
.storagebits = 16, \
.shift = STK8BA50_DATA_SHIFT, \
.endianness = IIO_CPU, \
}, \
}
static const struct iio_chan_spec stk8ba50_channels[] = {
STK8BA50_ACCEL_CHANNEL(0, STK8BA50_REG_XOUT, X),
STK8BA50_ACCEL_CHANNEL(1, STK8BA50_REG_YOUT, Y),
STK8BA50_ACCEL_CHANNEL(2, STK8BA50_REG_ZOUT, Z),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
static IIO_CONST_ATTR(in_accel_scale_available, STK8BA50_SCALE_AVAIL);
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("14 25 56 112 224 448 896 1792");
static struct attribute *stk8ba50_attributes[] = {
&iio_const_attr_in_accel_scale_available.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
NULL,
};
static const struct attribute_group stk8ba50_attribute_group = {
.attrs = stk8ba50_attributes
};
static int stk8ba50_read_accel(struct stk8ba50_data *data, u8 reg)
{
int ret;
struct i2c_client *client = data->client;
ret = i2c_smbus_read_word_data(client, reg);
if (ret < 0) {
dev_err(&client->dev, "register read failed\n");
return ret;
}
return ret;
}
static int stk8ba50_data_rdy_trigger_set_state(struct iio_trigger *trig,
bool state)
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
struct stk8ba50_data *data = iio_priv(indio_dev);
int ret;
if (state)
ret = i2c_smbus_write_byte_data(data->client,
STK8BA50_REG_INTEN2, STK8BA50_DREADY_INT_MASK);
else
ret = i2c_smbus_write_byte_data(data->client,
STK8BA50_REG_INTEN2, 0x00);
if (ret < 0)
dev_err(&data->client->dev, "failed to set trigger state\n");
else
data->dready_trigger_on = state;
return ret;
}
static const struct iio_trigger_ops stk8ba50_trigger_ops = {
.set_trigger_state = stk8ba50_data_rdy_trigger_set_state,
};
static int stk8ba50_set_power(struct stk8ba50_data *data, bool mode)
{
int ret;
u8 masked_reg;
struct i2c_client *client = data->client;
ret = i2c_smbus_read_byte_data(client, STK8BA50_REG_POWMODE);
if (ret < 0)
goto exit_err;
if (mode)
masked_reg = ret | STK8BA50_MODE_POWERBIT;
else
masked_reg = ret & (~STK8BA50_MODE_POWERBIT);
ret = i2c_smbus_write_byte_data(client, STK8BA50_REG_POWMODE,
masked_reg);
if (ret < 0)
goto exit_err;
return ret;
exit_err:
dev_err(&client->dev, "failed to change sensor mode\n");
return ret;
}
static int stk8ba50_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct stk8ba50_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (iio_buffer_enabled(indio_dev))
return -EBUSY;
mutex_lock(&data->lock);
ret = stk8ba50_set_power(data, STK8BA50_MODE_NORMAL);
if (ret < 0) {
mutex_unlock(&data->lock);
return -EINVAL;
}
ret = stk8ba50_read_accel(data, chan->address);
if (ret < 0) {
stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
mutex_unlock(&data->lock);
return -EINVAL;
}
*val = sign_extend32(ret >> STK8BA50_DATA_SHIFT, 9);
stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
mutex_unlock(&data->lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = stk8ba50_scale_table[data->range].scale_val;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = stk8ba50_samp_freq_table
[data->sample_rate_idx].samp_freq;
*val2 = 0;
return IIO_VAL_INT;
}
return -EINVAL;
}
static int stk8ba50_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
int ret;
int i;
int index = -1;
struct stk8ba50_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_SCALE:
if (val != 0)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(stk8ba50_scale_table); i++)
if (val2 == stk8ba50_scale_table[i].scale_val) {
index = i;
break;
}
if (index < 0)
return -EINVAL;
ret = i2c_smbus_write_byte_data(data->client,
STK8BA50_REG_RANGE,
stk8ba50_scale_table[index].reg_val);
if (ret < 0)
dev_err(&data->client->dev,
"failed to set measurement range\n");
else
data->range = index;
return ret;
case IIO_CHAN_INFO_SAMP_FREQ:
for (i = 0; i < ARRAY_SIZE(stk8ba50_samp_freq_table); i++)
if (val == stk8ba50_samp_freq_table[i].samp_freq) {
index = i;
break;
}
if (index < 0)
return -EINVAL;
ret = i2c_smbus_write_byte_data(data->client,
STK8BA50_REG_BWSEL,
stk8ba50_samp_freq_table[index].reg_val);
if (ret < 0)
dev_err(&data->client->dev,
"failed to set sampling rate\n");
else
data->sample_rate_idx = index;
return ret;
}
return -EINVAL;
}
static const struct iio_info stk8ba50_info = {
.read_raw = stk8ba50_read_raw,
.write_raw = stk8ba50_write_raw,
.attrs = &stk8ba50_attribute_group,
};
static irqreturn_t stk8ba50_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct stk8ba50_data *data = iio_priv(indio_dev);
int bit, ret, i = 0;
mutex_lock(&data->lock);
/*
* Do a bulk read if all channels are requested,
* from 0x02 (XOUT1) to 0x07 (ZOUT2)
*/
if (*(indio_dev->active_scan_mask) == STK8BA50_ALL_CHANNEL_MASK) {
ret = i2c_smbus_read_i2c_block_data(data->client,
STK8BA50_REG_XOUT,
STK8BA50_ALL_CHANNEL_SIZE,
(u8 *)data->buffer);
if (ret < STK8BA50_ALL_CHANNEL_SIZE) {
dev_err(&data->client->dev, "register read failed\n");
goto err;
}
} else {
for_each_set_bit(bit, indio_dev->active_scan_mask,
indio_dev->masklength) {
ret = stk8ba50_read_accel(data,
stk8ba50_channel_table[bit]);
if (ret < 0)
goto err;
data->buffer[i++] = ret;
}
}
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
pf->timestamp);
err:
mutex_unlock(&data->lock);
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static irqreturn_t stk8ba50_data_rdy_trig_poll(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct stk8ba50_data *data = iio_priv(indio_dev);
if (data->dready_trigger_on)
iio_trigger_poll(data->dready_trig);
return IRQ_HANDLED;
}
static int stk8ba50_buffer_preenable(struct iio_dev *indio_dev)
{
struct stk8ba50_data *data = iio_priv(indio_dev);
return stk8ba50_set_power(data, STK8BA50_MODE_NORMAL);
}
static int stk8ba50_buffer_postdisable(struct iio_dev *indio_dev)
{
struct stk8ba50_data *data = iio_priv(indio_dev);
return stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
}
static const struct iio_buffer_setup_ops stk8ba50_buffer_setup_ops = {
.preenable = stk8ba50_buffer_preenable,
.postdisable = stk8ba50_buffer_postdisable,
};
static int stk8ba50_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct iio_dev *indio_dev;
struct stk8ba50_data *data;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev) {
dev_err(&client->dev, "iio allocation failed!\n");
return -ENOMEM;
}
data = iio_priv(indio_dev);
data->client = client;
i2c_set_clientdata(client, indio_dev);
mutex_init(&data->lock);
indio_dev->info = &stk8ba50_info;
indio_dev->name = STK8BA50_DRIVER_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = stk8ba50_channels;
indio_dev->num_channels = ARRAY_SIZE(stk8ba50_channels);
/* Reset all registers on startup */
ret = i2c_smbus_write_byte_data(client,
STK8BA50_REG_SWRST, STK8BA50_RESET_CMD);
if (ret < 0) {
dev_err(&client->dev, "failed to reset sensor\n");
goto err_power_off;
}
/* The default range is +/-2g */
data->range = 0;
/* The default sampling rate is 1792 Hz (maximum) */
data->sample_rate_idx = STK8BA50_SR_1792HZ_IDX;
/* Set up interrupts */
ret = i2c_smbus_write_byte_data(client,
STK8BA50_REG_INTEN2, STK8BA50_DREADY_INT_MASK);
if (ret < 0) {
dev_err(&client->dev, "failed to set up interrupts\n");
goto err_power_off;
}
ret = i2c_smbus_write_byte_data(client,
STK8BA50_REG_INTMAP2, STK8BA50_DREADY_INT_MAP);
if (ret < 0) {
dev_err(&client->dev, "failed to set up interrupts\n");
goto err_power_off;
}
if (client->irq > 0) {
ret = devm_request_threaded_irq(&client->dev, client->irq,
stk8ba50_data_rdy_trig_poll,
NULL,
IRQF_TRIGGER_RISING |
IRQF_ONESHOT,
STK8BA50_IRQ_NAME,
indio_dev);
if (ret < 0) {
dev_err(&client->dev, "request irq %d failed\n",
client->irq);
goto err_power_off;
}
data->dready_trig = devm_iio_trigger_alloc(&client->dev,
"%s-dev%d",
indio_dev->name,
indio_dev->id);
if (!data->dready_trig) {
ret = -ENOMEM;
goto err_power_off;
}
data->dready_trig->dev.parent = &client->dev;
data->dready_trig->ops = &stk8ba50_trigger_ops;
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
ret = iio_trigger_register(data->dready_trig);
if (ret) {
dev_err(&client->dev, "iio trigger register failed\n");
goto err_power_off;
}
}
ret = iio_triggered_buffer_setup(indio_dev,
iio_pollfunc_store_time,
stk8ba50_trigger_handler,
&stk8ba50_buffer_setup_ops);
if (ret < 0) {
dev_err(&client->dev, "iio triggered buffer setup failed\n");
goto err_trigger_unregister;
}
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "device_register failed\n");
goto err_buffer_cleanup;
}
return ret;
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
if (data->dready_trig)
iio_trigger_unregister(data->dready_trig);
err_power_off:
stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
return ret;
}
static int stk8ba50_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct stk8ba50_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
if (data->dready_trig)
iio_trigger_unregister(data->dready_trig);
return stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
}
#ifdef CONFIG_PM_SLEEP
static int stk8ba50_suspend(struct device *dev)
{
struct stk8ba50_data *data;
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
return stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
}
static int stk8ba50_resume(struct device *dev)
{
struct stk8ba50_data *data;
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
return stk8ba50_set_power(data, STK8BA50_MODE_NORMAL);
}
static SIMPLE_DEV_PM_OPS(stk8ba50_pm_ops, stk8ba50_suspend, stk8ba50_resume);
#define STK8BA50_PM_OPS (&stk8ba50_pm_ops)
#else
#define STK8BA50_PM_OPS NULL
#endif
static const struct i2c_device_id stk8ba50_i2c_id[] = {
{"stk8ba50", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, stk8ba50_i2c_id);
static const struct acpi_device_id stk8ba50_acpi_id[] = {
{"STK8BA50", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, stk8ba50_acpi_id);
static struct i2c_driver stk8ba50_driver = {
.driver = {
.name = "stk8ba50",
.pm = STK8BA50_PM_OPS,
.acpi_match_table = ACPI_PTR(stk8ba50_acpi_id),
},
.probe = stk8ba50_probe,
.remove = stk8ba50_remove,
.id_table = stk8ba50_i2c_id,
};
module_i2c_driver(stk8ba50_driver);
MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
MODULE_DESCRIPTION("STK8BA50 3-Axis Accelerometer driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink