mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 02:45:51 +07:00
eadd431239
The USB phy controller in the A31 differs mostly from the older controllers because it has a clock dedicated for each phy, while the older ones were having a single clock for all the phys. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
337 lines
8.3 KiB
C
337 lines
8.3 KiB
C
/*
|
|
* Allwinner sun4i USB phy driver
|
|
*
|
|
* Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Based on code from
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
*
|
|
* Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
|
|
#define REG_ISCR 0x00
|
|
#define REG_PHYCTL 0x04
|
|
#define REG_PHYBIST 0x08
|
|
#define REG_PHYTUNE 0x0c
|
|
|
|
#define PHYCTL_DATA BIT(7)
|
|
|
|
#define SUNXI_AHB_ICHR8_EN BIT(10)
|
|
#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
|
|
#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
|
|
#define SUNXI_ULPI_BYPASS_EN BIT(0)
|
|
|
|
/* Common Control Bits for Both PHYs */
|
|
#define PHY_PLL_BW 0x03
|
|
#define PHY_RES45_CAL_EN 0x0c
|
|
|
|
/* Private Control Bits for Each PHY */
|
|
#define PHY_TX_AMPLITUDE_TUNE 0x20
|
|
#define PHY_TX_SLEWRATE_TUNE 0x22
|
|
#define PHY_VBUSVALID_TH_SEL 0x25
|
|
#define PHY_PULLUP_RES_SEL 0x27
|
|
#define PHY_OTG_FUNC_EN 0x28
|
|
#define PHY_VBUS_DET_EN 0x29
|
|
#define PHY_DISCON_TH_SEL 0x2a
|
|
|
|
#define MAX_PHYS 3
|
|
|
|
struct sun4i_usb_phy_data {
|
|
void __iomem *base;
|
|
struct mutex mutex;
|
|
int num_phys;
|
|
u32 disc_thresh;
|
|
struct sun4i_usb_phy {
|
|
struct phy *phy;
|
|
void __iomem *pmu;
|
|
struct regulator *vbus;
|
|
struct reset_control *reset;
|
|
struct clk *clk;
|
|
int index;
|
|
} phys[MAX_PHYS];
|
|
};
|
|
|
|
#define to_sun4i_usb_phy_data(phy) \
|
|
container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])
|
|
|
|
static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
|
|
int len)
|
|
{
|
|
struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
|
|
u32 temp, usbc_bit = BIT(phy->index * 2);
|
|
int i;
|
|
|
|
mutex_lock(&phy_data->mutex);
|
|
|
|
for (i = 0; i < len; i++) {
|
|
temp = readl(phy_data->base + REG_PHYCTL);
|
|
|
|
/* clear the address portion */
|
|
temp &= ~(0xff << 8);
|
|
|
|
/* set the address */
|
|
temp |= ((addr + i) << 8);
|
|
writel(temp, phy_data->base + REG_PHYCTL);
|
|
|
|
/* set the data bit and clear usbc bit*/
|
|
temp = readb(phy_data->base + REG_PHYCTL);
|
|
if (data & 0x1)
|
|
temp |= PHYCTL_DATA;
|
|
else
|
|
temp &= ~PHYCTL_DATA;
|
|
temp &= ~usbc_bit;
|
|
writeb(temp, phy_data->base + REG_PHYCTL);
|
|
|
|
/* pulse usbc_bit */
|
|
temp = readb(phy_data->base + REG_PHYCTL);
|
|
temp |= usbc_bit;
|
|
writeb(temp, phy_data->base + REG_PHYCTL);
|
|
|
|
temp = readb(phy_data->base + REG_PHYCTL);
|
|
temp &= ~usbc_bit;
|
|
writeb(temp, phy_data->base + REG_PHYCTL);
|
|
|
|
data >>= 1;
|
|
}
|
|
mutex_unlock(&phy_data->mutex);
|
|
}
|
|
|
|
static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
|
|
{
|
|
u32 bits, reg_value;
|
|
|
|
if (!phy->pmu)
|
|
return;
|
|
|
|
bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
|
|
SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
|
|
|
|
reg_value = readl(phy->pmu);
|
|
|
|
if (enable)
|
|
reg_value |= bits;
|
|
else
|
|
reg_value &= ~bits;
|
|
|
|
writel(reg_value, phy->pmu);
|
|
}
|
|
|
|
static int sun4i_usb_phy_init(struct phy *_phy)
|
|
{
|
|
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
|
|
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(phy->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_control_deassert(phy->reset);
|
|
if (ret) {
|
|
clk_disable_unprepare(phy->clk);
|
|
return ret;
|
|
}
|
|
|
|
/* Adjust PHY's magnitude and rate */
|
|
sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
|
|
|
|
/* Disconnect threshold adjustment */
|
|
sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2);
|
|
|
|
sun4i_usb_phy_passby(phy, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_usb_phy_exit(struct phy *_phy)
|
|
{
|
|
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
|
|
|
|
sun4i_usb_phy_passby(phy, 0);
|
|
reset_control_assert(phy->reset);
|
|
clk_disable_unprepare(phy->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_usb_phy_power_on(struct phy *_phy)
|
|
{
|
|
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
|
|
int ret = 0;
|
|
|
|
if (phy->vbus)
|
|
ret = regulator_enable(phy->vbus);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sun4i_usb_phy_power_off(struct phy *_phy)
|
|
{
|
|
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
|
|
|
|
if (phy->vbus)
|
|
regulator_disable(phy->vbus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops sun4i_usb_phy_ops = {
|
|
.init = sun4i_usb_phy_init,
|
|
.exit = sun4i_usb_phy_exit,
|
|
.power_on = sun4i_usb_phy_power_on,
|
|
.power_off = sun4i_usb_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *sun4i_usb_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
|
|
|
|
if (WARN_ON(args->args[0] == 0 || args->args[0] >= data->num_phys))
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
return data->phys[args->args[0]].phy;
|
|
}
|
|
|
|
static int sun4i_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct sun4i_usb_phy_data *data;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct phy_provider *phy_provider;
|
|
bool dedicated_clocks;
|
|
struct resource *res;
|
|
int i;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&data->mutex);
|
|
|
|
if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy"))
|
|
data->num_phys = 2;
|
|
else
|
|
data->num_phys = 3;
|
|
|
|
if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy"))
|
|
data->disc_thresh = 3;
|
|
else
|
|
data->disc_thresh = 2;
|
|
|
|
if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
|
|
dedicated_clocks = true;
|
|
else
|
|
dedicated_clocks = false;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
|
|
data->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(data->base))
|
|
return PTR_ERR(data->base);
|
|
|
|
/* Skip 0, 0 is the phy for otg which is not yet supported. */
|
|
for (i = 1; i < data->num_phys; i++) {
|
|
struct sun4i_usb_phy *phy = data->phys + i;
|
|
char name[16];
|
|
|
|
snprintf(name, sizeof(name), "usb%d_vbus", i);
|
|
phy->vbus = devm_regulator_get_optional(dev, name);
|
|
if (IS_ERR(phy->vbus)) {
|
|
if (PTR_ERR(phy->vbus) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
phy->vbus = NULL;
|
|
}
|
|
|
|
if (dedicated_clocks)
|
|
snprintf(name, sizeof(name), "usb%d_phy", i);
|
|
else
|
|
strlcpy(name, "usb_phy", sizeof(name));
|
|
|
|
phy->clk = devm_clk_get(dev, name);
|
|
if (IS_ERR(phy->clk)) {
|
|
dev_err(dev, "failed to get clock %s\n", name);
|
|
return PTR_ERR(phy->clk);
|
|
}
|
|
|
|
snprintf(name, sizeof(name), "usb%d_reset", i);
|
|
phy->reset = devm_reset_control_get(dev, name);
|
|
if (IS_ERR(phy->reset)) {
|
|
dev_err(dev, "failed to get reset %s\n", name);
|
|
return PTR_ERR(phy->reset);
|
|
}
|
|
|
|
if (i) { /* No pmu for usbc0 */
|
|
snprintf(name, sizeof(name), "pmu%d", i);
|
|
res = platform_get_resource_byname(pdev,
|
|
IORESOURCE_MEM, name);
|
|
phy->pmu = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(phy->pmu))
|
|
return PTR_ERR(phy->pmu);
|
|
}
|
|
|
|
phy->phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL);
|
|
if (IS_ERR(phy->phy)) {
|
|
dev_err(dev, "failed to create PHY %d\n", i);
|
|
return PTR_ERR(phy->phy);
|
|
}
|
|
|
|
phy->index = i;
|
|
phy_set_drvdata(phy->phy, &data->phys[i]);
|
|
}
|
|
|
|
dev_set_drvdata(dev, data);
|
|
phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate);
|
|
if (IS_ERR(phy_provider))
|
|
return PTR_ERR(phy_provider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sun4i_usb_phy_of_match[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-usb-phy" },
|
|
{ .compatible = "allwinner,sun5i-a13-usb-phy" },
|
|
{ .compatible = "allwinner,sun6i-a31-usb-phy" },
|
|
{ .compatible = "allwinner,sun7i-a20-usb-phy" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
|
|
|
|
static struct platform_driver sun4i_usb_phy_driver = {
|
|
.probe = sun4i_usb_phy_probe,
|
|
.driver = {
|
|
.of_match_table = sun4i_usb_phy_of_match,
|
|
.name = "sun4i-usb-phy",
|
|
.owner = THIS_MODULE,
|
|
}
|
|
};
|
|
module_platform_driver(sun4i_usb_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Allwinner sun4i USB phy driver");
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_LICENSE("GPL v2");
|