mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:16:49 +07:00
e6e0a68c6c
Now that a generic infrastructure is in place, it's possible to support the Armada 380 SoC thermal sensor. This sensor is similar to the one available in the already supported SoCs, with its specific temperature formula and specific sensor initialization. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
342 lines
8.4 KiB
C
342 lines
8.4 KiB
C
/*
|
|
* Marvell Armada 370/XP thermal sensor driver
|
|
*
|
|
* Copyright (C) 2013 Marvell
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#define THERMAL_VALID_MASK 0x1
|
|
|
|
/* Thermal Manager Control and Status Register */
|
|
#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
|
|
#define PMU_TM_DISABLE_OFFS 0
|
|
#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
|
|
#define PMU_TDC0_REF_CAL_CNT_OFFS 11
|
|
#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS)
|
|
#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30)
|
|
#define PMU_TDC0_START_CAL_MASK (0x1 << 25)
|
|
|
|
#define A375_Z1_CAL_RESET_LSB 0x8011e214
|
|
#define A375_Z1_CAL_RESET_MSB 0x30a88019
|
|
#define A375_Z1_WORKAROUND_BIT BIT(9)
|
|
|
|
#define A375_UNIT_CONTROL_SHIFT 27
|
|
#define A375_UNIT_CONTROL_MASK 0x7
|
|
#define A375_READOUT_INVERT BIT(15)
|
|
#define A375_HW_RESETn BIT(8)
|
|
#define A380_HW_RESET BIT(8)
|
|
|
|
struct armada_thermal_data;
|
|
|
|
/* Marvell EBU Thermal Sensor Dev Structure */
|
|
struct armada_thermal_priv {
|
|
void __iomem *sensor;
|
|
void __iomem *control;
|
|
struct armada_thermal_data *data;
|
|
};
|
|
|
|
struct armada_thermal_data {
|
|
/* Initialize the sensor */
|
|
void (*init_sensor)(struct platform_device *pdev,
|
|
struct armada_thermal_priv *);
|
|
|
|
/* Test for a valid sensor value (optional) */
|
|
bool (*is_valid)(struct armada_thermal_priv *);
|
|
|
|
/* Formula coeficients: temp = (b + m * reg) / div */
|
|
unsigned long coef_b;
|
|
unsigned long coef_m;
|
|
unsigned long coef_div;
|
|
bool inverted;
|
|
|
|
/* Register shift and mask to access the sensor temperature */
|
|
unsigned int temp_shift;
|
|
unsigned int temp_mask;
|
|
unsigned int is_valid_shift;
|
|
};
|
|
|
|
static void armadaxp_init_sensor(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
unsigned long reg;
|
|
|
|
reg = readl_relaxed(priv->control);
|
|
reg |= PMU_TDC0_OTF_CAL_MASK;
|
|
writel(reg, priv->control);
|
|
|
|
/* Reference calibration value */
|
|
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
|
|
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
|
|
writel(reg, priv->control);
|
|
|
|
/* Reset the sensor */
|
|
reg = readl_relaxed(priv->control);
|
|
writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
|
|
|
|
writel(reg, priv->control);
|
|
|
|
/* Enable the sensor */
|
|
reg = readl_relaxed(priv->sensor);
|
|
reg &= ~PMU_TM_DISABLE_MASK;
|
|
writel(reg, priv->sensor);
|
|
}
|
|
|
|
static void armada370_init_sensor(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
unsigned long reg;
|
|
|
|
reg = readl_relaxed(priv->control);
|
|
reg |= PMU_TDC0_OTF_CAL_MASK;
|
|
writel(reg, priv->control);
|
|
|
|
/* Reference calibration value */
|
|
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
|
|
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
|
|
writel(reg, priv->control);
|
|
|
|
reg &= ~PMU_TDC0_START_CAL_MASK;
|
|
writel(reg, priv->control);
|
|
|
|
mdelay(10);
|
|
}
|
|
|
|
static void armada375_init_sensor(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
unsigned long reg;
|
|
bool quirk_needed =
|
|
!!of_device_is_compatible(pdev->dev.of_node,
|
|
"marvell,armada375-z1-thermal");
|
|
|
|
if (quirk_needed) {
|
|
/* Ensure these registers have the default (reset) values */
|
|
writel(A375_Z1_CAL_RESET_LSB, priv->control);
|
|
writel(A375_Z1_CAL_RESET_MSB, priv->control + 0x4);
|
|
}
|
|
|
|
reg = readl(priv->control + 4);
|
|
reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
|
|
reg &= ~A375_READOUT_INVERT;
|
|
reg &= ~A375_HW_RESETn;
|
|
|
|
if (quirk_needed)
|
|
reg |= A375_Z1_WORKAROUND_BIT;
|
|
|
|
writel(reg, priv->control + 4);
|
|
mdelay(20);
|
|
|
|
reg |= A375_HW_RESETn;
|
|
writel(reg, priv->control + 4);
|
|
mdelay(50);
|
|
}
|
|
|
|
static void armada380_init_sensor(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
unsigned long reg = readl_relaxed(priv->control);
|
|
|
|
/* Reset hardware once */
|
|
if (!(reg & A380_HW_RESET)) {
|
|
reg |= A380_HW_RESET;
|
|
writel(reg, priv->control);
|
|
mdelay(10);
|
|
}
|
|
}
|
|
|
|
static bool armada_is_valid(struct armada_thermal_priv *priv)
|
|
{
|
|
unsigned long reg = readl_relaxed(priv->sensor);
|
|
|
|
return (reg >> priv->data->is_valid_shift) & THERMAL_VALID_MASK;
|
|
}
|
|
|
|
static int armada_get_temp(struct thermal_zone_device *thermal,
|
|
unsigned long *temp)
|
|
{
|
|
struct armada_thermal_priv *priv = thermal->devdata;
|
|
unsigned long reg;
|
|
unsigned long m, b, div;
|
|
|
|
/* Valid check */
|
|
if (priv->data->is_valid && !priv->data->is_valid(priv)) {
|
|
dev_err(&thermal->device,
|
|
"Temperature sensor reading not valid\n");
|
|
return -EIO;
|
|
}
|
|
|
|
reg = readl_relaxed(priv->sensor);
|
|
reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
|
|
|
|
/* Get formula coeficients */
|
|
b = priv->data->coef_b;
|
|
m = priv->data->coef_m;
|
|
div = priv->data->coef_div;
|
|
|
|
if (priv->data->inverted)
|
|
*temp = ((m * reg) - b) / div;
|
|
else
|
|
*temp = (b - (m * reg)) / div;
|
|
return 0;
|
|
}
|
|
|
|
static struct thermal_zone_device_ops ops = {
|
|
.get_temp = armada_get_temp,
|
|
};
|
|
|
|
static const struct armada_thermal_data armadaxp_data = {
|
|
.init_sensor = armadaxp_init_sensor,
|
|
.temp_shift = 10,
|
|
.temp_mask = 0x1ff,
|
|
.coef_b = 3153000000UL,
|
|
.coef_m = 10000000UL,
|
|
.coef_div = 13825,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada370_data = {
|
|
.is_valid = armada_is_valid,
|
|
.init_sensor = armada370_init_sensor,
|
|
.is_valid_shift = 9,
|
|
.temp_shift = 10,
|
|
.temp_mask = 0x1ff,
|
|
.coef_b = 3153000000UL,
|
|
.coef_m = 10000000UL,
|
|
.coef_div = 13825,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada375_data = {
|
|
.is_valid = armada_is_valid,
|
|
.init_sensor = armada375_init_sensor,
|
|
.is_valid_shift = 10,
|
|
.temp_shift = 0,
|
|
.temp_mask = 0x1ff,
|
|
.coef_b = 3171900000UL,
|
|
.coef_m = 10000000UL,
|
|
.coef_div = 13616,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada380_data = {
|
|
.is_valid = armada_is_valid,
|
|
.init_sensor = armada380_init_sensor,
|
|
.is_valid_shift = 10,
|
|
.temp_shift = 0,
|
|
.temp_mask = 0x3ff,
|
|
.coef_b = 1169498786UL,
|
|
.coef_m = 2000000UL,
|
|
.coef_div = 4289,
|
|
.inverted = true,
|
|
};
|
|
|
|
static const struct of_device_id armada_thermal_id_table[] = {
|
|
{
|
|
.compatible = "marvell,armadaxp-thermal",
|
|
.data = &armadaxp_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada370-thermal",
|
|
.data = &armada370_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada375-thermal",
|
|
.data = &armada375_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada375-z1-thermal",
|
|
.data = &armada375_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada380-thermal",
|
|
.data = &armada380_data,
|
|
},
|
|
{
|
|
/* sentinel */
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
|
|
|
|
static int armada_thermal_probe(struct platform_device *pdev)
|
|
{
|
|
struct thermal_zone_device *thermal;
|
|
const struct of_device_id *match;
|
|
struct armada_thermal_priv *priv;
|
|
struct resource *res;
|
|
|
|
match = of_match_device(armada_thermal_id_table, &pdev->dev);
|
|
if (!match)
|
|
return -ENODEV;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->sensor = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(priv->sensor))
|
|
return PTR_ERR(priv->sensor);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
priv->control = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(priv->control))
|
|
return PTR_ERR(priv->control);
|
|
|
|
priv->data = (struct armada_thermal_data *)match->data;
|
|
priv->data->init_sensor(pdev, priv);
|
|
|
|
thermal = thermal_zone_device_register("armada_thermal", 0, 0,
|
|
priv, &ops, NULL, 0, 0);
|
|
if (IS_ERR(thermal)) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to register thermal zone device\n");
|
|
return PTR_ERR(thermal);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, thermal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada_thermal_exit(struct platform_device *pdev)
|
|
{
|
|
struct thermal_zone_device *armada_thermal =
|
|
platform_get_drvdata(pdev);
|
|
|
|
thermal_zone_device_unregister(armada_thermal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver armada_thermal_driver = {
|
|
.probe = armada_thermal_probe,
|
|
.remove = armada_thermal_exit,
|
|
.driver = {
|
|
.name = "armada_thermal",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = armada_thermal_id_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(armada_thermal_driver);
|
|
|
|
MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Armada 370/XP thermal driver");
|
|
MODULE_LICENSE("GPL v2");
|