linux_dsm_epyc7002/include/linux/qed/qed_chain.h
Yuval Mintz 944945986f qed: Introduce DMA_REGPAIR_LE
FW hsi contains regpairs, mostly for 64-bit address representations.
Since same paradigm is applied each time a regpair is filled, this
introduces a new utility macro for setting such regpairs.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 22:49:16 -05:00

545 lines
14 KiB
C

/* QLogic qed NIC Driver
* Copyright (c) 2015 QLogic Corporation
*
* This software is available under the terms of the GNU General Public License
* (GPL) Version 2, available from the file COPYING in the main directory of
* this source tree.
*/
#ifndef _QED_CHAIN_H
#define _QED_CHAIN_H
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/qed/common_hsi.h>
/* dma_addr_t manip */
#define DMA_LO_LE(x) cpu_to_le32(lower_32_bits(x))
#define DMA_HI_LE(x) cpu_to_le32(upper_32_bits(x))
#define DMA_REGPAIR_LE(x, val) do { \
(x).hi = DMA_HI_LE((val)); \
(x).lo = DMA_LO_LE((val)); \
} while (0)
#define HILO_GEN(hi, lo, type) ((((type)(hi)) << 32) + (lo))
#define HILO_DMA(hi, lo) HILO_GEN(hi, lo, dma_addr_t)
#define HILO_64(hi, lo) HILO_GEN((le32_to_cpu(hi)), (le32_to_cpu(lo)), u64)
#define HILO_DMA_REGPAIR(regpair) (HILO_DMA(regpair.hi, regpair.lo))
#define HILO_64_REGPAIR(regpair) (HILO_64(regpair.hi, regpair.lo))
enum qed_chain_mode {
/* Each Page contains a next pointer at its end */
QED_CHAIN_MODE_NEXT_PTR,
/* Chain is a single page (next ptr) is unrequired */
QED_CHAIN_MODE_SINGLE,
/* Page pointers are located in a side list */
QED_CHAIN_MODE_PBL,
};
enum qed_chain_use_mode {
QED_CHAIN_USE_TO_PRODUCE, /* Chain starts empty */
QED_CHAIN_USE_TO_CONSUME, /* Chain starts full */
QED_CHAIN_USE_TO_CONSUME_PRODUCE, /* Chain starts empty */
};
struct qed_chain_next {
struct regpair next_phys;
void *next_virt;
};
struct qed_chain_pbl {
dma_addr_t p_phys_table;
void *p_virt_table;
u16 prod_page_idx;
u16 cons_page_idx;
};
struct qed_chain {
void *p_virt_addr;
dma_addr_t p_phys_addr;
void *p_prod_elem;
void *p_cons_elem;
u16 page_cnt;
enum qed_chain_mode mode;
enum qed_chain_use_mode intended_use; /* used to produce/consume */
u16 capacity; /*< number of _usable_ elements */
u16 size; /* number of elements */
u16 prod_idx;
u16 cons_idx;
u16 elem_per_page;
u16 elem_per_page_mask;
u16 elem_unusable;
u16 usable_per_page;
u16 elem_size;
u16 next_page_mask;
struct qed_chain_pbl pbl;
};
#define QED_CHAIN_PBL_ENTRY_SIZE (8)
#define QED_CHAIN_PAGE_SIZE (0x1000)
#define ELEMS_PER_PAGE(elem_size) (QED_CHAIN_PAGE_SIZE / (elem_size))
#define UNUSABLE_ELEMS_PER_PAGE(elem_size, mode) \
((mode == QED_CHAIN_MODE_NEXT_PTR) ? \
(1 + ((sizeof(struct qed_chain_next) - 1) / \
(elem_size))) : 0)
#define USABLE_ELEMS_PER_PAGE(elem_size, mode) \
((u32)(ELEMS_PER_PAGE(elem_size) - \
UNUSABLE_ELEMS_PER_PAGE(elem_size, mode)))
#define QED_CHAIN_PAGE_CNT(elem_cnt, elem_size, mode) \
DIV_ROUND_UP(elem_cnt, USABLE_ELEMS_PER_PAGE(elem_size, mode))
/* Accessors */
static inline u16 qed_chain_get_prod_idx(struct qed_chain *p_chain)
{
return p_chain->prod_idx;
}
static inline u16 qed_chain_get_cons_idx(struct qed_chain *p_chain)
{
return p_chain->cons_idx;
}
static inline u16 qed_chain_get_elem_left(struct qed_chain *p_chain)
{
u16 used;
/* we don't need to trancate upon assignmet, as we assign u32->u16 */
used = ((u32)0x10000u + (u32)(p_chain->prod_idx)) -
(u32)p_chain->cons_idx;
if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR)
used -= p_chain->prod_idx / p_chain->elem_per_page -
p_chain->cons_idx / p_chain->elem_per_page;
return p_chain->capacity - used;
}
static inline u8 qed_chain_is_full(struct qed_chain *p_chain)
{
return qed_chain_get_elem_left(p_chain) == p_chain->capacity;
}
static inline u8 qed_chain_is_empty(struct qed_chain *p_chain)
{
return qed_chain_get_elem_left(p_chain) == 0;
}
static inline u16 qed_chain_get_elem_per_page(
struct qed_chain *p_chain)
{
return p_chain->elem_per_page;
}
static inline u16 qed_chain_get_usable_per_page(
struct qed_chain *p_chain)
{
return p_chain->usable_per_page;
}
static inline u16 qed_chain_get_unusable_per_page(
struct qed_chain *p_chain)
{
return p_chain->elem_unusable;
}
static inline u16 qed_chain_get_size(struct qed_chain *p_chain)
{
return p_chain->size;
}
static inline dma_addr_t
qed_chain_get_pbl_phys(struct qed_chain *p_chain)
{
return p_chain->pbl.p_phys_table;
}
/**
* @brief qed_chain_advance_page -
*
* Advance the next element accros pages for a linked chain
*
* @param p_chain
* @param p_next_elem
* @param idx_to_inc
* @param page_to_inc
*/
static inline void
qed_chain_advance_page(struct qed_chain *p_chain,
void **p_next_elem,
u16 *idx_to_inc,
u16 *page_to_inc)
{
switch (p_chain->mode) {
case QED_CHAIN_MODE_NEXT_PTR:
{
struct qed_chain_next *p_next = *p_next_elem;
*p_next_elem = p_next->next_virt;
*idx_to_inc += p_chain->elem_unusable;
break;
}
case QED_CHAIN_MODE_SINGLE:
*p_next_elem = p_chain->p_virt_addr;
break;
case QED_CHAIN_MODE_PBL:
/* It is assumed pages are sequential, next element needs
* to change only when passing going back to first from last.
*/
if (++(*page_to_inc) == p_chain->page_cnt) {
*page_to_inc = 0;
*p_next_elem = p_chain->p_virt_addr;
}
}
}
#define is_unusable_idx(p, idx) \
(((p)->idx & (p)->elem_per_page_mask) == (p)->usable_per_page)
#define is_unusable_next_idx(p, idx) \
((((p)->idx + 1) & (p)->elem_per_page_mask) == (p)->usable_per_page)
#define test_ans_skip(p, idx) \
do { \
if (is_unusable_idx(p, idx)) { \
(p)->idx += (p)->elem_unusable; \
} \
} while (0)
/**
* @brief qed_chain_return_multi_produced -
*
* A chain in which the driver "Produces" elements should use this API
* to indicate previous produced elements are now consumed.
*
* @param p_chain
* @param num
*/
static inline void
qed_chain_return_multi_produced(struct qed_chain *p_chain,
u16 num)
{
p_chain->cons_idx += num;
test_ans_skip(p_chain, cons_idx);
}
/**
* @brief qed_chain_return_produced -
*
* A chain in which the driver "Produces" elements should use this API
* to indicate previous produced elements are now consumed.
*
* @param p_chain
*/
static inline void qed_chain_return_produced(struct qed_chain *p_chain)
{
p_chain->cons_idx++;
test_ans_skip(p_chain, cons_idx);
}
/**
* @brief qed_chain_produce -
*
* A chain in which the driver "Produces" elements should use this to get
* a pointer to the next element which can be "Produced". It's driver
* responsibility to validate that the chain has room for new element.
*
* @param p_chain
*
* @return void*, a pointer to next element
*/
static inline void *qed_chain_produce(struct qed_chain *p_chain)
{
void *ret = NULL;
if ((p_chain->prod_idx & p_chain->elem_per_page_mask) ==
p_chain->next_page_mask) {
qed_chain_advance_page(p_chain, &p_chain->p_prod_elem,
&p_chain->prod_idx,
&p_chain->pbl.prod_page_idx);
}
ret = p_chain->p_prod_elem;
p_chain->prod_idx++;
p_chain->p_prod_elem = (void *)(((u8 *)p_chain->p_prod_elem) +
p_chain->elem_size);
return ret;
}
/**
* @brief qed_chain_get_capacity -
*
* Get the maximum number of BDs in chain
*
* @param p_chain
* @param num
*
* @return u16, number of unusable BDs
*/
static inline u16 qed_chain_get_capacity(struct qed_chain *p_chain)
{
return p_chain->capacity;
}
/**
* @brief qed_chain_recycle_consumed -
*
* Returns an element which was previously consumed;
* Increments producers so they could be written to FW.
*
* @param p_chain
*/
static inline void
qed_chain_recycle_consumed(struct qed_chain *p_chain)
{
test_ans_skip(p_chain, prod_idx);
p_chain->prod_idx++;
}
/**
* @brief qed_chain_consume -
*
* A Chain in which the driver utilizes data written by a different source
* (i.e., FW) should use this to access passed buffers.
*
* @param p_chain
*
* @return void*, a pointer to the next buffer written
*/
static inline void *qed_chain_consume(struct qed_chain *p_chain)
{
void *ret = NULL;
if ((p_chain->cons_idx & p_chain->elem_per_page_mask) ==
p_chain->next_page_mask) {
qed_chain_advance_page(p_chain, &p_chain->p_cons_elem,
&p_chain->cons_idx,
&p_chain->pbl.cons_page_idx);
}
ret = p_chain->p_cons_elem;
p_chain->cons_idx++;
p_chain->p_cons_elem = (void *)(((u8 *)p_chain->p_cons_elem) +
p_chain->elem_size);
return ret;
}
/**
* @brief qed_chain_reset - Resets the chain to its start state
*
* @param p_chain pointer to a previously allocted chain
*/
static inline void qed_chain_reset(struct qed_chain *p_chain)
{
int i;
p_chain->prod_idx = 0;
p_chain->cons_idx = 0;
p_chain->p_cons_elem = p_chain->p_virt_addr;
p_chain->p_prod_elem = p_chain->p_virt_addr;
if (p_chain->mode == QED_CHAIN_MODE_PBL) {
p_chain->pbl.prod_page_idx = p_chain->page_cnt - 1;
p_chain->pbl.cons_page_idx = p_chain->page_cnt - 1;
}
switch (p_chain->intended_use) {
case QED_CHAIN_USE_TO_CONSUME_PRODUCE:
case QED_CHAIN_USE_TO_PRODUCE:
/* Do nothing */
break;
case QED_CHAIN_USE_TO_CONSUME:
/* produce empty elements */
for (i = 0; i < p_chain->capacity; i++)
qed_chain_recycle_consumed(p_chain);
break;
}
}
/**
* @brief qed_chain_init - Initalizes a basic chain struct
*
* @param p_chain
* @param p_virt_addr
* @param p_phys_addr physical address of allocated buffer's beginning
* @param page_cnt number of pages in the allocated buffer
* @param elem_size size of each element in the chain
* @param intended_use
* @param mode
*/
static inline void qed_chain_init(struct qed_chain *p_chain,
void *p_virt_addr,
dma_addr_t p_phys_addr,
u16 page_cnt,
u8 elem_size,
enum qed_chain_use_mode intended_use,
enum qed_chain_mode mode)
{
/* chain fixed parameters */
p_chain->p_virt_addr = p_virt_addr;
p_chain->p_phys_addr = p_phys_addr;
p_chain->elem_size = elem_size;
p_chain->page_cnt = page_cnt;
p_chain->mode = mode;
p_chain->intended_use = intended_use;
p_chain->elem_per_page = ELEMS_PER_PAGE(elem_size);
p_chain->usable_per_page =
USABLE_ELEMS_PER_PAGE(elem_size, mode);
p_chain->capacity = p_chain->usable_per_page * page_cnt;
p_chain->size = p_chain->elem_per_page * page_cnt;
p_chain->elem_per_page_mask = p_chain->elem_per_page - 1;
p_chain->elem_unusable = UNUSABLE_ELEMS_PER_PAGE(elem_size, mode);
p_chain->next_page_mask = (p_chain->usable_per_page &
p_chain->elem_per_page_mask);
if (mode == QED_CHAIN_MODE_NEXT_PTR) {
struct qed_chain_next *p_next;
u16 i;
for (i = 0; i < page_cnt - 1; i++) {
/* Increment mem_phy to the next page. */
p_phys_addr += QED_CHAIN_PAGE_SIZE;
/* Initialize the physical address of the next page. */
p_next = (struct qed_chain_next *)((u8 *)p_virt_addr +
elem_size *
p_chain->
usable_per_page);
p_next->next_phys.lo = DMA_LO_LE(p_phys_addr);
p_next->next_phys.hi = DMA_HI_LE(p_phys_addr);
/* Initialize the virtual address of the next page. */
p_next->next_virt = (void *)((u8 *)p_virt_addr +
QED_CHAIN_PAGE_SIZE);
/* Move to the next page. */
p_virt_addr = p_next->next_virt;
}
/* Last page's next should point to beginning of the chain */
p_next = (struct qed_chain_next *)((u8 *)p_virt_addr +
elem_size *
p_chain->usable_per_page);
p_next->next_phys.lo = DMA_LO_LE(p_chain->p_phys_addr);
p_next->next_phys.hi = DMA_HI_LE(p_chain->p_phys_addr);
p_next->next_virt = p_chain->p_virt_addr;
}
qed_chain_reset(p_chain);
}
/**
* @brief qed_chain_pbl_init - Initalizes a basic pbl chain
* struct
* @param p_chain
* @param p_virt_addr virtual address of allocated buffer's beginning
* @param p_phys_addr physical address of allocated buffer's beginning
* @param page_cnt number of pages in the allocated buffer
* @param elem_size size of each element in the chain
* @param use_mode
* @param p_phys_pbl pointer to a pre-allocated side table
* which will hold physical page addresses.
* @param p_virt_pbl pointer to a pre allocated side table
* which will hold virtual page addresses.
*/
static inline void
qed_chain_pbl_init(struct qed_chain *p_chain,
void *p_virt_addr,
dma_addr_t p_phys_addr,
u16 page_cnt,
u8 elem_size,
enum qed_chain_use_mode use_mode,
dma_addr_t p_phys_pbl,
dma_addr_t *p_virt_pbl)
{
dma_addr_t *p_pbl_dma = p_virt_pbl;
int i;
qed_chain_init(p_chain, p_virt_addr, p_phys_addr, page_cnt,
elem_size, use_mode, QED_CHAIN_MODE_PBL);
p_chain->pbl.p_phys_table = p_phys_pbl;
p_chain->pbl.p_virt_table = p_virt_pbl;
/* Fill the PBL with physical addresses*/
for (i = 0; i < page_cnt; i++) {
*p_pbl_dma = p_phys_addr;
p_phys_addr += QED_CHAIN_PAGE_SIZE;
p_pbl_dma++;
}
}
/**
* @brief qed_chain_set_prod - sets the prod to the given
* value
*
* @param prod_idx
* @param p_prod_elem
*/
static inline void qed_chain_set_prod(struct qed_chain *p_chain,
u16 prod_idx,
void *p_prod_elem)
{
p_chain->prod_idx = prod_idx;
p_chain->p_prod_elem = p_prod_elem;
}
/**
* @brief qed_chain_get_elem -
*
* get a pointer to an element represented by absolute idx
*
* @param p_chain
* @assumption p_chain->size is a power of 2
*
* @return void*, a pointer to next element
*/
static inline void *qed_chain_sge_get_elem(struct qed_chain *p_chain,
u16 idx)
{
void *ret = NULL;
if (idx >= p_chain->size)
return NULL;
ret = (u8 *)p_chain->p_virt_addr + p_chain->elem_size * idx;
return ret;
}
/**
* @brief qed_chain_sge_inc_cons_prod
*
* for sge chains, producer isn't increased serially, the ring
* is expected to be full at all times. Once elements are
* consumed, they are immediately produced.
*
* @param p_chain
* @param cnt
*
* @return inline void
*/
static inline void
qed_chain_sge_inc_cons_prod(struct qed_chain *p_chain,
u16 cnt)
{
p_chain->prod_idx += cnt;
p_chain->cons_idx += cnt;
}
#endif