mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-01 13:26:45 +07:00
4bd597b633
The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
369 lines
9.3 KiB
C
369 lines
9.3 KiB
C
/*
|
|
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/imx-uart.h>
|
|
#include <mach/iomux-mx3.h>
|
|
#include <mach/ulpi.h>
|
|
|
|
#include <media/soc_camera.h>
|
|
|
|
#include "devices-imx31.h"
|
|
#include "devices.h"
|
|
|
|
static unsigned int marxbot_pins[] = {
|
|
/* SDHC2 */
|
|
MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
|
|
MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
|
|
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
|
|
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
|
|
/* CSI */
|
|
MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
|
|
MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
|
|
MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
|
|
MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
|
|
MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
|
|
MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
|
|
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
|
|
MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
|
|
MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
|
|
MX31_PIN_TXD2__GPIO1_28,
|
|
/* dsPIC resets */
|
|
MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
|
|
/*battery detection */
|
|
MX31_PIN_LCS0__GPIO3_23,
|
|
/* USB H1 */
|
|
MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
|
|
MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
|
|
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
|
|
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
|
|
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
|
|
/* SEL */
|
|
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
|
|
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
|
|
};
|
|
|
|
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
|
|
#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
|
|
|
|
static int marxbot_sdhc2_get_ro(struct device *dev)
|
|
{
|
|
return !gpio_get_value(SDHC2_WP);
|
|
}
|
|
|
|
static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
|
|
void *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request(SDHC2_CD, "sdhc-detect");
|
|
if (ret)
|
|
return ret;
|
|
|
|
gpio_direction_input(SDHC2_CD);
|
|
|
|
ret = gpio_request(SDHC2_WP, "sdhc-wp");
|
|
if (ret)
|
|
goto err_gpio_free;
|
|
gpio_direction_input(SDHC2_WP);
|
|
|
|
ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
"sdhc2-card-detect", data);
|
|
if (ret)
|
|
goto err_gpio_free_2;
|
|
|
|
return 0;
|
|
|
|
err_gpio_free_2:
|
|
gpio_free(SDHC2_WP);
|
|
err_gpio_free:
|
|
gpio_free(SDHC2_CD);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void marxbot_sdhc2_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(gpio_to_irq(SDHC2_CD), data);
|
|
gpio_free(SDHC2_WP);
|
|
gpio_free(SDHC2_CD);
|
|
}
|
|
|
|
static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
|
|
.get_ro = marxbot_sdhc2_get_ro,
|
|
.init = marxbot_sdhc2_init,
|
|
.exit = marxbot_sdhc2_exit,
|
|
};
|
|
|
|
#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5)
|
|
#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5)
|
|
|
|
static void dspics_resets_init(void)
|
|
{
|
|
if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
|
|
gpio_direction_output(TRSLAT_RST_B, 0);
|
|
gpio_export(TRSLAT_RST_B, false);
|
|
}
|
|
|
|
if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
|
|
gpio_direction_output(DSPICS_RST_B, 0);
|
|
gpio_export(DSPICS_RST_B, false);
|
|
}
|
|
}
|
|
|
|
static struct spi_board_info marxbot_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "spidev",
|
|
.max_speed_hz = 300000,
|
|
.bus_num = 1,
|
|
.chip_select = 1, /* according spi1_cs[] ! */
|
|
},
|
|
};
|
|
|
|
#define TURRETCAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
|
|
#define BASECAM_POWER IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
|
|
#define TURRETCAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
|
|
#define BASECAM_RST_B IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
|
|
#define CAM_CHOICE IOMUX_TO_GPIO(MX31_PIN_TXD2)
|
|
|
|
static int marxbot_basecam_power(struct device *dev, int on)
|
|
{
|
|
gpio_set_value(BASECAM_POWER, !on);
|
|
return 0;
|
|
}
|
|
|
|
static int marxbot_basecam_reset(struct device *dev)
|
|
{
|
|
gpio_set_value(BASECAM_RST_B, 0);
|
|
udelay(100);
|
|
gpio_set_value(BASECAM_RST_B, 1);
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_board_info marxbot_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("mt9t031", 0x5d),
|
|
},
|
|
};
|
|
|
|
static struct soc_camera_link base_iclink = {
|
|
.bus_id = 0, /* Must match with the camera ID */
|
|
.power = marxbot_basecam_power,
|
|
.reset = marxbot_basecam_reset,
|
|
.board_info = &marxbot_i2c_devices[0],
|
|
.i2c_adapter_id = 0,
|
|
};
|
|
|
|
static struct platform_device marxbot_camera[] = {
|
|
{
|
|
.name = "soc-camera-pdrv",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &base_iclink,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct platform_device *marxbot_cameras[] __initdata = {
|
|
&marxbot_camera[0],
|
|
};
|
|
|
|
static int __init marxbot_cam_init(void)
|
|
{
|
|
int ret = gpio_request(CAM_CHOICE, "cam-choice");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(CAM_CHOICE, 0);
|
|
|
|
ret = gpio_request(BASECAM_RST_B, "basecam-reset");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(BASECAM_RST_B, 1);
|
|
ret = gpio_request(BASECAM_POWER, "basecam-standby");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(BASECAM_POWER, 0);
|
|
|
|
ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(TURRETCAM_RST_B, 1);
|
|
ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(TURRETCAM_POWER, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
|
|
#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
|
|
#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
|
|
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
|
|
|
|
static void marxbot_init_sel_gpios(void)
|
|
{
|
|
if (!gpio_request(SEL0, "sel0")) {
|
|
gpio_direction_input(SEL0);
|
|
gpio_export(SEL0, true);
|
|
}
|
|
|
|
if (!gpio_request(SEL1, "sel1")) {
|
|
gpio_direction_input(SEL1);
|
|
gpio_export(SEL1, true);
|
|
}
|
|
|
|
if (!gpio_request(SEL2, "sel2")) {
|
|
gpio_direction_input(SEL2);
|
|
gpio_export(SEL2, true);
|
|
}
|
|
|
|
if (!gpio_request(SEL3, "sel3")) {
|
|
gpio_direction_input(SEL3);
|
|
gpio_export(SEL3, true);
|
|
}
|
|
}
|
|
|
|
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
|
|
|
|
static int marxbot_usbh1_hw_init(struct platform_device *pdev)
|
|
{
|
|
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
|
|
|
|
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
|
|
|
|
mdelay(10);
|
|
|
|
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
|
|
MXC_EHCI_INTERFACE_SINGLE_UNI);
|
|
}
|
|
|
|
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
|
|
#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
|
|
|
|
static int marxbot_isp1105_init(struct otg_transceiver *otg)
|
|
{
|
|
int ret = gpio_request(USBH1_MODE, "usbh1-mode");
|
|
if (ret)
|
|
return ret;
|
|
/* single ended */
|
|
gpio_direction_output(USBH1_MODE, 0);
|
|
|
|
ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
|
|
if (ret) {
|
|
gpio_free(USBH1_MODE);
|
|
return ret;
|
|
}
|
|
gpio_direction_output(USBH1_VBUSEN_B, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
|
|
{
|
|
if (on)
|
|
gpio_set_value(USBH1_VBUSEN_B, 0);
|
|
else
|
|
gpio_set_value(USBH1_VBUSEN_B, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
|
|
.init = marxbot_usbh1_hw_init,
|
|
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
|
|
};
|
|
|
|
static int __init marxbot_usbh1_init(void)
|
|
{
|
|
struct otg_transceiver *otg;
|
|
struct platform_device *pdev;
|
|
|
|
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
|
|
if (!otg)
|
|
return -ENOMEM;
|
|
|
|
otg->label = "ISP1105";
|
|
otg->init = marxbot_isp1105_init;
|
|
otg->set_vbus = marxbot_isp1105_set_vbus;
|
|
|
|
usbh1_pdata.otg = otg;
|
|
|
|
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
|
|
if (IS_ERR(pdev))
|
|
return PTR_ERR(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_ULPI,
|
|
};
|
|
|
|
/*
|
|
* system init for baseboard usage. Will be called by mx31moboard init.
|
|
*/
|
|
void __init mx31moboard_marxbot_init(void)
|
|
{
|
|
printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
|
|
|
|
mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
|
|
"marxbot");
|
|
|
|
marxbot_init_sel_gpios();
|
|
|
|
dspics_resets_init();
|
|
|
|
imx31_add_mxc_mmc(1, &sdhc2_pdata);
|
|
|
|
spi_register_board_info(marxbot_spi_board_info,
|
|
ARRAY_SIZE(marxbot_spi_board_info));
|
|
|
|
marxbot_cam_init();
|
|
platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
|
|
|
|
/* battery present pin */
|
|
gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
|
|
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
|
|
gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
|
|
|
|
imx31_add_fsl_usb2_udc(&usb_pdata);
|
|
|
|
marxbot_usbh1_init();
|
|
}
|