AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
93f0fa7519
linux_dsm_epyc7002/drivers/net/ethernet/mediatek/mtk_eth_soc.h
Sean Wang 243dc5fb46 net: mediatek: remove superfluous pin setup for MT7622 SoC 
Remove superfluous pin setup to get out of accessing invalid I/O pin
registers because the way for pin configuring tends to be different from
various SoCs and thus it should be better being managed and controlled by
the pinctrl driver which MT7622 already can support.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26 12:05:46 -05:00

689 lines
21 KiB
C
Raw Blame History

/* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2009-2016 John Crispin <blogic@openwrt.org>
* Copyright (C) 2009-2016 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2013-2016 Michael Lee <igvtee@gmail.com>
*/
#ifndef MTK_ETH_H
#define MTK_ETH_H
#include <linux/refcount.h>
#define MTK_QDMA_PAGE_SIZE 2048
#define MTK_MAX_RX_LENGTH 1536
#define MTK_TX_DMA_BUF_LEN 0x3fff
#define MTK_DMA_SIZE 256
#define MTK_NAPI_WEIGHT 64
#define MTK_MAC_COUNT 2
#define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
#define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
#define MTK_DMA_DUMMY_DESC 0xffffffff
#define MTK_DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
NETIF_MSG_LINK | \
NETIF_MSG_TIMER | \
NETIF_MSG_IFDOWN | \
NETIF_MSG_IFUP | \
NETIF_MSG_RX_ERR | \
NETIF_MSG_TX_ERR)
#define MTK_HW_FEATURES (NETIF_F_IP_CSUM | \
NETIF_F_RXCSUM | \
NETIF_F_HW_VLAN_CTAG_TX | \
NETIF_F_HW_VLAN_CTAG_RX | \
NETIF_F_SG | NETIF_F_TSO | \
NETIF_F_TSO6 | \
NETIF_F_IPV6_CSUM)
#define NEXT_RX_DESP_IDX(X, Y) (((X) + 1) & ((Y) - 1))
#define MTK_MAX_RX_RING_NUM 4
#define MTK_HW_LRO_DMA_SIZE 8
#define MTK_MAX_LRO_RX_LENGTH (4096 * 3)
#define MTK_MAX_LRO_IP_CNT 2
#define MTK_HW_LRO_TIMER_UNIT 1 /* 20 us */
#define MTK_HW_LRO_REFRESH_TIME 50000 /* 1 sec. */
#define MTK_HW_LRO_AGG_TIME 10 /* 200us */
#define MTK_HW_LRO_AGE_TIME 50 /* 1ms */
#define MTK_HW_LRO_MAX_AGG_CNT 64
#define MTK_HW_LRO_BW_THRE 3000
#define MTK_HW_LRO_REPLACE_DELTA 1000
#define MTK_HW_LRO_SDL_REMAIN_ROOM 1522
/* Frame Engine Global Reset Register */
#define MTK_RST_GL 0x04
#define RST_GL_PSE BIT(0)
/* Frame Engine Interrupt Status Register */
#define MTK_INT_STATUS2 0x08
#define MTK_GDM1_AF BIT(28)
#define MTK_GDM2_AF BIT(29)
/* PDMA HW LRO Alter Flow Timer Register */
#define MTK_PDMA_LRO_ALT_REFRESH_TIMER 0x1c
/* Frame Engine Interrupt Grouping Register */
#define MTK_FE_INT_GRP 0x20
/* CDMP Ingress Control Register */
#define MTK_CDMQ_IG_CTRL 0x1400
#define MTK_CDMQ_STAG_EN BIT(0)
/* CDMP Exgress Control Register */
#define MTK_CDMP_EG_CTRL 0x404
/* GDM Exgress Control Register */
#define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000))
#define MTK_GDMA_ICS_EN BIT(22)
#define MTK_GDMA_TCS_EN BIT(21)
#define MTK_GDMA_UCS_EN BIT(20)
/* Unicast Filter MAC Address Register - Low */
#define MTK_GDMA_MAC_ADRL(x) (0x508 + (x * 0x1000))
/* Unicast Filter MAC Address Register - High */
#define MTK_GDMA_MAC_ADRH(x) (0x50C + (x * 0x1000))
/* PDMA RX Base Pointer Register */
#define MTK_PRX_BASE_PTR0 0x900
#define MTK_PRX_BASE_PTR_CFG(x) (MTK_PRX_BASE_PTR0 + (x * 0x10))
/* PDMA RX Maximum Count Register */
#define MTK_PRX_MAX_CNT0 0x904
#define MTK_PRX_MAX_CNT_CFG(x) (MTK_PRX_MAX_CNT0 + (x * 0x10))
/* PDMA RX CPU Pointer Register */
#define MTK_PRX_CRX_IDX0 0x908
#define MTK_PRX_CRX_IDX_CFG(x) (MTK_PRX_CRX_IDX0 + (x * 0x10))
/* PDMA HW LRO Control Registers */
#define MTK_PDMA_LRO_CTRL_DW0 0x980
#define MTK_LRO_EN BIT(0)
#define MTK_L3_CKS_UPD_EN BIT(7)
#define MTK_LRO_ALT_PKT_CNT_MODE BIT(21)
#define MTK_LRO_RING_RELINQUISH_REQ (0x7 << 26)
#define MTK_LRO_RING_RELINQUISH_DONE (0x7 << 29)
#define MTK_PDMA_LRO_CTRL_DW1 0x984
#define MTK_PDMA_LRO_CTRL_DW2 0x988
#define MTK_PDMA_LRO_CTRL_DW3 0x98c
#define MTK_ADMA_MODE BIT(15)
#define MTK_LRO_MIN_RXD_SDL (MTK_HW_LRO_SDL_REMAIN_ROOM << 16)
/* PDMA Global Configuration Register */
#define MTK_PDMA_GLO_CFG 0xa04
#define MTK_MULTI_EN BIT(10)
/* PDMA Reset Index Register */
#define MTK_PDMA_RST_IDX 0xa08
#define MTK_PST_DRX_IDX0 BIT(16)
#define MTK_PST_DRX_IDX_CFG(x) (MTK_PST_DRX_IDX0 << (x))
/* PDMA Delay Interrupt Register */
#define MTK_PDMA_DELAY_INT 0xa0c
#define MTK_PDMA_DELAY_RX_EN BIT(15)
#define MTK_PDMA_DELAY_RX_PINT 4
#define MTK_PDMA_DELAY_RX_PINT_SHIFT 8
#define MTK_PDMA_DELAY_RX_PTIME 4
#define MTK_PDMA_DELAY_RX_DELAY \
(MTK_PDMA_DELAY_RX_EN | MTK_PDMA_DELAY_RX_PTIME | \
(MTK_PDMA_DELAY_RX_PINT << MTK_PDMA_DELAY_RX_PINT_SHIFT))
/* PDMA Interrupt Status Register */
#define MTK_PDMA_INT_STATUS 0xa20
/* PDMA Interrupt Mask Register */
#define MTK_PDMA_INT_MASK 0xa28
/* PDMA HW LRO Alter Flow Delta Register */
#define MTK_PDMA_LRO_ALT_SCORE_DELTA 0xa4c
/* PDMA Interrupt grouping registers */
#define MTK_PDMA_INT_GRP1 0xa50
#define MTK_PDMA_INT_GRP2 0xa54
/* PDMA HW LRO IP Setting Registers */
#define MTK_LRO_RX_RING0_DIP_DW0 0xb04
#define MTK_LRO_DIP_DW0_CFG(x) (MTK_LRO_RX_RING0_DIP_DW0 + (x * 0x40))
#define MTK_RING_MYIP_VLD BIT(9)
/* PDMA HW LRO Ring Control Registers */
#define MTK_LRO_RX_RING0_CTRL_DW1 0xb28
#define MTK_LRO_RX_RING0_CTRL_DW2 0xb2c
#define MTK_LRO_RX_RING0_CTRL_DW3 0xb30
#define MTK_LRO_CTRL_DW1_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW1 + (x * 0x40))
#define MTK_LRO_CTRL_DW2_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW2 + (x * 0x40))
#define MTK_LRO_CTRL_DW3_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW3 + (x * 0x40))
#define MTK_RING_AGE_TIME_L ((MTK_HW_LRO_AGE_TIME & 0x3ff) << 22)
#define MTK_RING_AGE_TIME_H ((MTK_HW_LRO_AGE_TIME >> 10) & 0x3f)
#define MTK_RING_AUTO_LERAN_MODE (3 << 6)
#define MTK_RING_VLD BIT(8)
#define MTK_RING_MAX_AGG_TIME ((MTK_HW_LRO_AGG_TIME & 0xffff) << 10)
#define MTK_RING_MAX_AGG_CNT_L ((MTK_HW_LRO_MAX_AGG_CNT & 0x3f) << 26)
#define MTK_RING_MAX_AGG_CNT_H ((MTK_HW_LRO_MAX_AGG_CNT >> 6) & 0x3)
/* QDMA TX Queue Configuration Registers */
#define MTK_QTX_CFG(x) (0x1800 + (x * 0x10))
#define QDMA_RES_THRES 4
/* QDMA TX Queue Scheduler Registers */
#define MTK_QTX_SCH(x) (0x1804 + (x * 0x10))
/* QDMA RX Base Pointer Register */
#define MTK_QRX_BASE_PTR0 0x1900
/* QDMA RX Maximum Count Register */
#define MTK_QRX_MAX_CNT0 0x1904
/* QDMA RX CPU Pointer Register */
#define MTK_QRX_CRX_IDX0 0x1908
/* QDMA RX DMA Pointer Register */
#define MTK_QRX_DRX_IDX0 0x190C
/* QDMA Global Configuration Register */
#define MTK_QDMA_GLO_CFG 0x1A04
#define MTK_RX_2B_OFFSET BIT(31)
#define MTK_RX_BT_32DWORDS (3 << 11)
#define MTK_NDP_CO_PRO BIT(10)
#define MTK_TX_WB_DDONE BIT(6)
#define MTK_DMA_SIZE_16DWORDS (2 << 4)
#define MTK_RX_DMA_BUSY BIT(3)
#define MTK_TX_DMA_BUSY BIT(1)
#define MTK_RX_DMA_EN BIT(2)
#define MTK_TX_DMA_EN BIT(0)
#define MTK_DMA_BUSY_TIMEOUT HZ
/* QDMA Reset Index Register */
#define MTK_QDMA_RST_IDX 0x1A08
/* QDMA Delay Interrupt Register */
#define MTK_QDMA_DELAY_INT 0x1A0C
/* QDMA Flow Control Register */
#define MTK_QDMA_FC_THRES 0x1A10
#define FC_THRES_DROP_MODE BIT(20)
#define FC_THRES_DROP_EN (7 << 16)
#define FC_THRES_MIN 0x4444
/* QDMA Interrupt Status Register */
#define MTK_QMTK_INT_STATUS 0x1A18
#define MTK_RX_DONE_DLY BIT(30)
#define MTK_RX_DONE_INT3 BIT(19)
#define MTK_RX_DONE_INT2 BIT(18)
#define MTK_RX_DONE_INT1 BIT(17)
#define MTK_RX_DONE_INT0 BIT(16)
#define MTK_TX_DONE_INT3 BIT(3)
#define MTK_TX_DONE_INT2 BIT(2)
#define MTK_TX_DONE_INT1 BIT(1)
#define MTK_TX_DONE_INT0 BIT(0)
#define MTK_RX_DONE_INT MTK_RX_DONE_DLY
#define MTK_TX_DONE_INT (MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \
MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3)
/* QDMA Interrupt grouping registers */
#define MTK_QDMA_INT_GRP1 0x1a20
#define MTK_QDMA_INT_GRP2 0x1a24
#define MTK_RLS_DONE_INT BIT(0)
/* QDMA Interrupt Status Register */
#define MTK_QDMA_INT_MASK 0x1A1C
/* QDMA Interrupt Mask Register */
#define MTK_QDMA_HRED2 0x1A44
/* QDMA TX Forward CPU Pointer Register */
#define MTK_QTX_CTX_PTR 0x1B00
/* QDMA TX Forward DMA Pointer Register */
#define MTK_QTX_DTX_PTR 0x1B04
/* QDMA TX Release CPU Pointer Register */
#define MTK_QTX_CRX_PTR 0x1B10
/* QDMA TX Release DMA Pointer Register */
#define MTK_QTX_DRX_PTR 0x1B14
/* QDMA FQ Head Pointer Register */
#define MTK_QDMA_FQ_HEAD 0x1B20
/* QDMA FQ Head Pointer Register */
#define MTK_QDMA_FQ_TAIL 0x1B24
/* QDMA FQ Free Page Counter Register */
#define MTK_QDMA_FQ_CNT 0x1B28
/* QDMA FQ Free Page Buffer Length Register */
#define MTK_QDMA_FQ_BLEN 0x1B2C
/* GMA1 Received Good Byte Count Register */
#define MTK_GDM1_TX_GBCNT 0x2400
#define MTK_STAT_OFFSET 0x40
/* QDMA descriptor txd4 */
#define TX_DMA_CHKSUM (0x7 << 29)
#define TX_DMA_TSO BIT(28)
#define TX_DMA_FPORT_SHIFT 25
#define TX_DMA_FPORT_MASK 0x7
#define TX_DMA_INS_VLAN BIT(16)
/* QDMA descriptor txd3 */
#define TX_DMA_OWNER_CPU BIT(31)
#define TX_DMA_LS0 BIT(30)
#define TX_DMA_PLEN0(_x) (((_x) & MTK_TX_DMA_BUF_LEN) << 16)
#define TX_DMA_SWC BIT(14)
#define TX_DMA_SDL(_x) (((_x) & 0x3fff) << 16)
/* QDMA descriptor rxd2 */
#define RX_DMA_DONE BIT(31)
#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
/* QDMA descriptor rxd3 */
#define RX_DMA_VID(_x) ((_x) & 0xfff)
/* QDMA descriptor rxd4 */
#define RX_DMA_L4_VALID BIT(24)
#define RX_DMA_FPORT_SHIFT 19
#define RX_DMA_FPORT_MASK 0x7
/* PHY Indirect Access Control registers */
#define MTK_PHY_IAC 0x10004
#define PHY_IAC_ACCESS BIT(31)
#define PHY_IAC_READ BIT(19)
#define PHY_IAC_WRITE BIT(18)
#define PHY_IAC_START BIT(16)
#define PHY_IAC_ADDR_SHIFT 20
#define PHY_IAC_REG_SHIFT 25
#define PHY_IAC_TIMEOUT HZ
#define MTK_MAC_MISC 0x1000c
#define MTK_MUX_TO_ESW BIT(0)
/* Mac control registers */
#define MTK_MAC_MCR(x) (0x10100 + (x * 0x100))
#define MAC_MCR_MAX_RX_1536 BIT(24)
#define MAC_MCR_IPG_CFG (BIT(18) | BIT(16))
#define MAC_MCR_FORCE_MODE BIT(15)
#define MAC_MCR_TX_EN BIT(14)
#define MAC_MCR_RX_EN BIT(13)
#define MAC_MCR_BACKOFF_EN BIT(9)
#define MAC_MCR_BACKPR_EN BIT(8)
#define MAC_MCR_FORCE_RX_FC BIT(5)
#define MAC_MCR_FORCE_TX_FC BIT(4)
#define MAC_MCR_SPEED_1000 BIT(3)
#define MAC_MCR_SPEED_100 BIT(2)
#define MAC_MCR_FORCE_DPX BIT(1)
#define MAC_MCR_FORCE_LINK BIT(0)
#define MAC_MCR_FIXED_LINK (MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | \
MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN | \
MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN | \
MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_RX_FC | \
MAC_MCR_FORCE_TX_FC | MAC_MCR_SPEED_1000 | \
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_LINK)
/* TRGMII RXC control register */
#define TRGMII_RCK_CTRL 0x10300
#define DQSI0(x) ((x << 0) & GENMASK(6, 0))
#define DQSI1(x) ((x << 8) & GENMASK(14, 8))
#define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
#define RXC_DQSISEL BIT(30)
#define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
#define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)
/* TRGMII RXC control register */
#define TRGMII_TCK_CTRL 0x10340
#define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
#define TXC_INV BIT(30)
#define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2)
#define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))
/* TRGMII Interface mode register */
#define INTF_MODE 0x10390
#define TRGMII_INTF_DIS BIT(0)
#define TRGMII_MODE BIT(1)
#define TRGMII_CENTRAL_ALIGNED BIT(2)
#define INTF_MODE_RGMII_1000 (TRGMII_MODE | TRGMII_CENTRAL_ALIGNED)
#define INTF_MODE_RGMII_10_100 0
/* GPIO port control registers for GMAC 2*/
#define GPIO_OD33_CTRL8 0x4c0
#define GPIO_BIAS_CTRL 0xed0
#define GPIO_DRV_SEL10 0xf00
/* ethernet subsystem chip id register */
#define ETHSYS_CHIPID0_3 0x0
#define ETHSYS_CHIPID4_7 0x4
#define MT7623_ETH 7623
#define MT7622_ETH 7622
/* ethernet subsystem config register */
#define ETHSYS_SYSCFG0 0x14
#define SYSCFG0_GE_MASK 0x3
#define SYSCFG0_GE_MODE(x, y) (x << (12 + (y * 2)))
#define SYSCFG0_SGMII_MASK (3 << 8)
#define SYSCFG0_SGMII_GMAC1 ((2 << 8) & GENMASK(9, 8))
#define SYSCFG0_SGMII_GMAC2 ((3 << 8) & GENMASK(9, 8))
/* ethernet subsystem clock register */
#define ETHSYS_CLKCFG0 0x2c
#define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11)
/* ethernet reset control register */
#define ETHSYS_RSTCTRL 0x34
#define RSTCTRL_FE BIT(6)
#define RSTCTRL_PPE BIT(31)
/* SGMII subsystem config registers */
/* Register to auto-negotiation restart */
#define SGMSYS_PCS_CONTROL_1 0x0
#define SGMII_AN_RESTART BIT(9)
/* Register to programmable link timer, the unit in 2 * 8ns */
#define SGMSYS_PCS_LINK_TIMER 0x18
#define SGMII_LINK_TIMER_DEFAULT (0x186a0 & GENMASK(19, 0))
/* Register to control remote fault */
#define SGMSYS_SGMII_MODE 0x20
#define SGMII_REMOTE_FAULT_DIS BIT(8)
/* Register to power up QPHY */
#define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8
#define SGMII_PHYA_PWD BIT(4)
struct mtk_rx_dma {
unsigned int rxd1;
unsigned int rxd2;
unsigned int rxd3;
unsigned int rxd4;
} __packed __aligned(4);
struct mtk_tx_dma {
unsigned int txd1;
unsigned int txd2;
unsigned int txd3;
unsigned int txd4;
} __packed __aligned(4);
struct mtk_eth;
struct mtk_mac;
/* struct mtk_hw_stats - the structure that holds the traffic statistics.
* @stats_lock: make sure that stats operations are atomic
* @reg_offset: the status register offset of the SoC
* @syncp: the refcount
*
* All of the supported SoCs have hardware counters for traffic statistics.
* Whenever the status IRQ triggers we can read the latest stats from these
* counters and store them in this struct.
*/
struct mtk_hw_stats {
u64 tx_bytes;
u64 tx_packets;
u64 tx_skip;
u64 tx_collisions;
u64 rx_bytes;
u64 rx_packets;
u64 rx_overflow;
u64 rx_fcs_errors;
u64 rx_short_errors;
u64 rx_long_errors;
u64 rx_checksum_errors;
u64 rx_flow_control_packets;
spinlock_t stats_lock;
u32 reg_offset;
struct u64_stats_sync syncp;
};
enum mtk_tx_flags {
/* PDMA descriptor can point at 1-2 segments. This enum allows us to
* track how memory was allocated so that it can be freed properly.
*/
MTK_TX_FLAGS_SINGLE0 = 0x01,
MTK_TX_FLAGS_PAGE0 = 0x02,
/* MTK_TX_FLAGS_FPORTx allows tracking which port the transmitted
* SKB out instead of looking up through hardware TX descriptor.
*/
MTK_TX_FLAGS_FPORT0 = 0x04,
MTK_TX_FLAGS_FPORT1 = 0x08,
};
/* This enum allows us to identify how the clock is defined on the array of the
* clock in the order
*/
enum mtk_clks_map {
MTK_CLK_ETHIF,
MTK_CLK_ESW,
MTK_CLK_GP0,
MTK_CLK_GP1,
MTK_CLK_GP2,
MTK_CLK_TRGPLL,
MTK_CLK_SGMII_TX_250M,
MTK_CLK_SGMII_RX_250M,
MTK_CLK_SGMII_CDR_REF,
MTK_CLK_SGMII_CDR_FB,
MTK_CLK_SGMII_CK,
MTK_CLK_ETH2PLL,
MTK_CLK_MAX
};
#define MT7623_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \
BIT(MTK_CLK_GP1) | BIT(MTK_CLK_GP2) | \
BIT(MTK_CLK_TRGPLL))
#define MT7622_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \
BIT(MTK_CLK_GP0) | BIT(MTK_CLK_GP1) | \
BIT(MTK_CLK_GP2) | \
BIT(MTK_CLK_SGMII_TX_250M) | \
BIT(MTK_CLK_SGMII_RX_250M) | \
BIT(MTK_CLK_SGMII_CDR_REF) | \
BIT(MTK_CLK_SGMII_CDR_FB) | \
BIT(MTK_CLK_SGMII_CK) | \
BIT(MTK_CLK_ETH2PLL))
enum mtk_dev_state {
MTK_HW_INIT,
MTK_RESETTING
};
/* struct mtk_tx_buf - This struct holds the pointers to the memory pointed at
* by the TX descriptor s
* @skb: The SKB pointer of the packet being sent
* @dma_addr0: The base addr of the first segment
* @dma_len0: The length of the first segment
* @dma_addr1: The base addr of the second segment
* @dma_len1: The length of the second segment
*/
struct mtk_tx_buf {
struct sk_buff *skb;
u32 flags;
DEFINE_DMA_UNMAP_ADDR(dma_addr0);
DEFINE_DMA_UNMAP_LEN(dma_len0);
DEFINE_DMA_UNMAP_ADDR(dma_addr1);
DEFINE_DMA_UNMAP_LEN(dma_len1);
};
/* struct mtk_tx_ring - This struct holds info describing a TX ring
* @dma: The descriptor ring
* @buf: The memory pointed at by the ring
* @phys: The physical addr of tx_buf
* @next_free: Pointer to the next free descriptor
* @last_free: Pointer to the last free descriptor
* @thresh: The threshold of minimum amount of free descriptors
* @free_count: QDMA uses a linked list. Track how many free descriptors
* are present
*/
struct mtk_tx_ring {
struct mtk_tx_dma *dma;
struct mtk_tx_buf *buf;
dma_addr_t phys;
struct mtk_tx_dma *next_free;
struct mtk_tx_dma *last_free;
u16 thresh;
atomic_t free_count;
};
/* PDMA rx ring mode */
enum mtk_rx_flags {
MTK_RX_FLAGS_NORMAL = 0,
MTK_RX_FLAGS_HWLRO,
MTK_RX_FLAGS_QDMA,
};
/* struct mtk_rx_ring - This struct holds info describing a RX ring
* @dma: The descriptor ring
* @data: The memory pointed at by the ring
* @phys: The physical addr of rx_buf
* @frag_size: How big can each fragment be
* @buf_size: The size of each packet buffer
* @calc_idx: The current head of ring
*/
struct mtk_rx_ring {
struct mtk_rx_dma *dma;
u8 **data;
dma_addr_t phys;
u16 frag_size;
u16 buf_size;
u16 dma_size;
bool calc_idx_update;
u16 calc_idx;
u32 crx_idx_reg;
};
#define MTK_TRGMII BIT(0)
#define MTK_GMAC1_TRGMII (BIT(1) | MTK_TRGMII)
#define MTK_ESW BIT(4)
#define MTK_GMAC1_ESW (BIT(5) | MTK_ESW)
#define MTK_SGMII BIT(8)
#define MTK_GMAC1_SGMII (BIT(9) | MTK_SGMII)
#define MTK_GMAC2_SGMII (BIT(10) | MTK_SGMII)
#define MTK_DUAL_GMAC_SHARED_SGMII (BIT(11) | MTK_GMAC1_SGMII | \
MTK_GMAC2_SGMII)
#define MTK_HAS_CAPS(caps, _x) (((caps) & (_x)) == (_x))
/* struct mtk_eth_data - This is the structure holding all differences
* among various plaforms
* @caps Flags shown the extra capability for the SoC
* @required_clks Flags shown the bitmap for required clocks on
* the target SoC
* @required_pctl A bool value to show whether the SoC requires
* the extra setup for those pins used by GMAC.
*/
struct mtk_soc_data {
u32 caps;
u32 required_clks;
bool required_pctl;
};
/* currently no SoC has more than 2 macs */
#define MTK_MAX_DEVS 2
/* struct mtk_eth - This is the main datasructure for holding the state
* of the driver
* @dev: The device pointer
* @base: The mapped register i/o base
* @page_lock: Make sure that register operations are atomic
* @tx_irq__lock: Make sure that IRQ register operations are atomic
* @rx_irq__lock: Make sure that IRQ register operations are atomic
* @dummy_dev: we run 2 netdevs on 1 physical DMA ring and need a
* dummy for NAPI to work
* @netdev: The netdev instances
* @mac: Each netdev is linked to a physical MAC
* @irq: The IRQ that we are using
* @msg_enable: Ethtool msg level
* @ethsys: The register map pointing at the range used to setup
* MII modes
* @sgmiisys: The register map pointing at the range used to setup
* SGMII modes
* @pctl: The register map pointing at the range used to setup
* GMAC port drive/slew values
* @dma_refcnt: track how many netdevs are using the DMA engine
* @tx_ring: Pointer to the memory holding info about the TX ring
* @rx_ring: Pointer to the memory holding info about the RX ring
* @rx_ring_qdma: Pointer to the memory holding info about the QDMA RX ring
* @tx_napi: The TX NAPI struct
* @rx_napi: The RX NAPI struct
* @scratch_ring: Newer SoCs need memory for a second HW managed TX ring
* @phy_scratch_ring: physical address of scratch_ring
* @scratch_head: The scratch memory that scratch_ring points to.
* @clks: clock array for all clocks required
* @mii_bus: If there is a bus we need to create an instance for it
* @pending_work: The workqueue used to reset the dma ring
* @state: Initialization and runtime state of the device
* @soc: Holding specific data among vaious SoCs
*/
struct mtk_eth {
struct device *dev;
void __iomem *base;
spinlock_t page_lock;
spinlock_t tx_irq_lock;
spinlock_t rx_irq_lock;
struct net_device dummy_dev;
struct net_device *netdev[MTK_MAX_DEVS];
struct mtk_mac *mac[MTK_MAX_DEVS];
int irq[3];
u32 msg_enable;
unsigned long sysclk;
struct regmap *ethsys;
struct regmap *sgmiisys;
struct regmap *pctl;
u32 chip_id;
bool hwlro;
refcount_t dma_refcnt;
struct mtk_tx_ring tx_ring;
struct mtk_rx_ring rx_ring[MTK_MAX_RX_RING_NUM];
struct mtk_rx_ring rx_ring_qdma;
struct napi_struct tx_napi;
struct napi_struct rx_napi;
struct mtk_tx_dma *scratch_ring;
dma_addr_t phy_scratch_ring;
void *scratch_head;
struct clk *clks[MTK_CLK_MAX];
struct mii_bus *mii_bus;
struct work_struct pending_work;
unsigned long state;
const struct mtk_soc_data *soc;
};
/* struct mtk_mac - the structure that holds the info about the MACs of the
* SoC
* @id: The number of the MAC
* @ge_mode: Interface mode kept for setup restoring
* @of_node: Our devicetree node
* @hw: Backpointer to our main datastruture
* @hw_stats: Packet statistics counter
* @trgmii Indicate if the MAC uses TRGMII connected to internal
switch
*/
struct mtk_mac {
int id;
int ge_mode;
struct device_node *of_node;
struct mtk_eth *hw;
struct mtk_hw_stats *hw_stats;
__be32 hwlro_ip[MTK_MAX_LRO_IP_CNT];
int hwlro_ip_cnt;
bool trgmii;
};
/* the struct describing the SoC. these are declared in the soc_xyz.c files */
extern const struct of_device_id of_mtk_match[];
/* read the hardware status register */
void mtk_stats_update_mac(struct mtk_mac *mac);
void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
#endif /* MTK_ETH_H */
Reference in New Issue View Git Blame Copy Permalink