linux_dsm_epyc7002/drivers/net/wireless/wl12xx
Kalle Valo 93c5bb68c8 wl1271: don't get received frames from hardware in PLT mode
Most probably patch "wl1271: add most of the normal initialization commands
to PLT mode" enabled the RX path in firmware so that now driver received
frames and passed them to mac80211, which warned about them.

Workaround this by not retrieving frames from the hardware, just ignore them.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09 15:03:01 -05:00
..
Kconfig wl1271: Initial SDIO implementation 2010-03-09 15:02:59 -05:00
Makefile wl1271: Initial SDIO implementation 2010-03-09 15:02:59 -05:00
wl12xx_80211.h wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00
wl1251_acx.c wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_acx.h wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_boot.c wl1251: timeout one too soon in wl1251_boot_run_firmware() 2009-12-28 16:20:06 -05:00
wl1251_boot.h wl1251: remove wl1251_ops 2009-08-14 09:13:38 -04:00
wl1251_cmd.c wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_cmd.h wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_debugfs.c wl1251: add tx queue status to debugfs 2009-12-21 18:55:44 -05:00
wl1251_debugfs.h wl1251: use wl1251 prefix everywhere 2009-07-10 14:57:50 -04:00
wl1251_event.c wl1251: Increase the beacon loss timeout value and handle regain event 2009-11-18 17:09:22 -05:00
wl1251_event.h wl1251: use wl1251 prefix everywhere 2009-07-10 14:57:50 -04:00
wl1251_init.c wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_init.h wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_io.c wl1251: rename reg.h to wl1251_reg.h 2009-08-14 09:13:41 -04:00
wl1251_io.h wl1251: make wl1251_set_partition bus agnostic 2009-08-14 09:13:37 -04:00
wl1251_main.c wl1251: fix txop unit 2010-02-08 16:50:56 -05:00
wl1251_ps.c wl1251: simplify ELP wakeup time calculation 2009-12-21 18:55:52 -05:00
wl1251_ps.h wl1251: Implement delayed entry into ELP mode 2009-11-18 17:09:20 -05:00
wl1251_reg.h wl1251: add NVS in EEPROM support 2009-11-18 17:09:24 -05:00
wl1251_rx.c wl1251: use __dev_alloc_skb() on RX 2009-12-21 18:55:54 -05:00
wl1251_rx.h wl12xx: fix spelling 2009-07-24 15:05:26 -04:00
wl1251_sdio.c wl1251: remove Luciano as maintainer 2009-08-14 09:13:42 -04:00
wl1251_spi.c wl1251: add NVS in EEPROM support 2009-11-18 17:09:24 -05:00
wl1251_spi.h wl1251: rename reg.h to wl1251_reg.h 2009-08-14 09:13:41 -04:00
wl1251_tx.c wl1251: update tx_hdr when aliging skb in tx 2009-12-21 18:56:00 -05:00
wl1251_tx.h wl1251: enable WMM 2009-12-21 18:56:02 -05:00
wl1251.h mac80211: wait for beacon before enabling powersave 2010-01-26 11:53:21 -05:00
wl1271_acx.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_acx.h wl1271: Fix beacon filter table configuration 2010-02-19 15:52:46 -05:00
wl1271_boot.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_boot.h wl1271: RefClk configuration 2009-10-27 16:48:04 -04:00
wl1271_cmd.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_cmd.h wl1271: Use NVS INI file configuration 2010-02-19 15:52:43 -05:00
wl1271_conf.h wl1271: Use NVS INI file configuration 2010-02-19 15:52:43 -05:00
wl1271_debugfs.c wl1271: Change booleans in struct wl1271 into a flags bitmask 2009-12-28 16:31:35 -05:00
wl1271_debugfs.h wl1271: add wl1271 driver files 2009-08-14 09:12:46 -04:00
wl1271_event.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_event.h wl1271: Fix event acknowledging functionality 2009-12-28 16:31:34 -05:00
wl1271_init.c wl1271: add most of the normal initialization commands to PLT mode 2010-02-19 15:52:44 -05:00
wl1271_init.h wl1271: add most of the normal initialization commands to PLT mode 2010-02-19 15:52:44 -05:00
wl1271_io.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_io.h wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_main.c wl1271: Changed access to fw status register to use raw read 2010-03-09 15:02:59 -05:00
wl1271_ps.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_ps.h wl1271: Fix PSM entry 2010-02-19 15:52:42 -05:00
wl1271_reg.h wl1271: remove unused flags 2010-01-14 18:16:54 -05:00
wl1271_rx.c wl1271: don't get received frames from hardware in PLT mode 2010-03-09 15:03:01 -05:00
wl1271_rx.h wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00
wl1271_sdio.c wl1271: Fixed unloading of the wl1271_sdio module 2010-03-09 15:03:01 -05:00
wl1271_spi.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_testmode.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_testmode.h wl1271: add testmode support 2010-02-19 15:52:47 -05:00
wl1271_tx.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_tx.h wl1271: implement WMM 2010-02-19 15:52:43 -05:00
wl1271.h wl1271: Implemented abstraction of IO functions. 2010-03-09 15:02:57 -05:00