linux_dsm_epyc7002/drivers/usb/chipidea/ci_hdrc_imx.h
Li Jun 93c2c7330a
usb: chipidea: imx: enable vbus and id wakeup only for OTG events
If ID or VBUS is from external block, don't enable its wakeup
because it isn't used at all.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-11-18 16:45:30 +08:00

36 lines
1.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*/
#ifndef __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
#define __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
struct imx_usbmisc_data {
struct device *dev;
int index;
unsigned int disable_oc:1; /* over current detect disabled */
/* true if over-current polarity is active low */
unsigned int oc_pol_active_low:1;
/* true if dt specifies polarity */
unsigned int oc_pol_configured:1;
unsigned int pwr_pol:1; /* power polarity */
unsigned int evdo:1; /* set external vbus divider option */
unsigned int ulpi:1; /* connected to an ULPI phy */
unsigned int hsic:1; /* HSIC controlller */
unsigned int ext_id:1; /* ID from exteranl event */
unsigned int ext_vbus:1; /* Vbus from exteranl event */
};
int imx_usbmisc_init(struct imx_usbmisc_data *data);
int imx_usbmisc_init_post(struct imx_usbmisc_data *data);
int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled);
int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data);
int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on);
#endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */