linux_dsm_epyc7002/drivers/clk/sunxi
Chen-Yu Tsai 934fe5f48a clk: sunxi: Make divs clocks specify which output is the base factor clock
The current sunxi clock driver has the base factor clock of divs clocks
as the last clock output of the clock node. This makes it rather difficult
to add new outputs, such as fixed dividers, which were previously unknown.

This patch makes the divs clocks data structure specify which output is
the factor clock, and updates all current divs clocks accordingly.

We can then add new outputs after the factor clocks, at least not breaking
backward compatibility with regards to the devicetree bindings.

Also replace kzalloc with kcalloc in sunxi_divs_clk_setup().

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-25 11:46:32 -07:00
..
clk-a10-hosc.c clk: sunxi: Move the 24M oscillator to a file of its own 2014-06-11 09:58:44 +02:00
clk-a20-gmac.c clk: sunxi: gmac-tx-clk mux is not a CLK_MUX_INDEX_BIT mux 2014-11-23 17:02:57 +01:00
clk-factors.c clk: Add rate constraints to clocks 2015-02-02 14:23:42 -08:00
clk-factors.h clk: sunxi: Give sunxi_factors_register a registers parameter 2014-12-21 23:51:37 +01:00
clk-mod0.c clk: sunxi: Add mod0 and mmc module clock support for A80 2015-01-19 22:48:55 +01:00
clk-sun6i-apb0-gates.c clk: Remove .owner field for driver 2014-09-25 17:43:31 -07:00
clk-sun6i-apb0.c clk: Remove .owner field for driver 2014-09-25 17:43:31 -07:00
clk-sun6i-ar100.c clk: Add rate constraints to clocks 2015-02-02 14:23:42 -08:00
clk-sun8i-apb0.c clk: Remove .owner field for driver 2014-09-25 17:43:31 -07:00
clk-sun8i-mbus.c clk: sunxi: Give sunxi_factors_register a registers parameter 2014-12-21 23:51:37 +01:00
clk-sun9i-core.c clk: sunxi: rewrite sun9i_a80_get_pll4_factors() 2015-01-25 16:55:13 +01:00
clk-sun9i-mmc.c clk: sunxi: Add driver for A80 MMC config clocks/resets 2015-01-20 17:14:38 +01:00
clk-sunxi.c clk: sunxi: Make divs clocks specify which output is the base factor clock 2015-03-25 11:46:32 -07:00
clk-usb.c clk: sunxi: Add support for sun9i A80 USB clocks and resets 2015-02-23 09:25:54 +01:00
Makefile clk: sunxi: Move USB clocks to separate file 2015-02-23 09:25:54 +01:00