linux_dsm_epyc7002/arch/arm/boot/dts/tegra20-colibri-iris.dts
Krzysztof Kozlowski 8ab11f8068 ARM: tegra: Work safely with 256 MB Colibri-T20 modules
Colibri-T20 can come in 256 MB RAM (with 512 MB NAND) or 512 MB RAM
(with 1024 MB NAND) flavors.  Both of them will use the same DTSI
expecting the bootloader to do the fixup of /memory node.  However in
case it does not happen, let's stay on safe side by limiting the memory
to 256 MB for both versions of Colibri-T20.

Rename to remove the unnecessary memory size from the device tree file
name.  While at it, also follow the typical Toradex SoC, module, carrier
board hierarchy.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-07-09 18:50:53 +02:00

107 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "tegra20-colibri.dtsi"
/ {
model = "Toradex Colibri T20 256/512 MB on Iris";
compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
aliases {
serial0 = &uarta;
serial1 = &uartd;
};
chosen {
stdout-path = "serial0:115200n8";
};
host1x@50000000 {
hdmi@54280000 {
status = "okay";
};
};
pinmux@70000014 {
state_default: pinmux {
hdint {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
i2cddc {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdio4 {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uarta {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uartd {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
serial@70006000 {
status = "okay";
};
serial@70006300 {
status = "okay";
};
i2c_ddc: i2c@7000c400 {
status = "okay";
};
usb@c5000000 {
status = "okay";
};
usb-phy@c5000000 {
status = "okay";
};
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
};
sdhci@c8000600 {
status = "okay";
bus-width = <4>;
vmmc-supply = <&vcc_sd_reg>;
vqmmc-supply = <&vcc_sd_reg>;
};
regulators {
regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_host_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
};
vcc_sd_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};