linux_dsm_epyc7002/arch/arm64/include/asm/tlbflush.h
Philip Elcan 7f170499f7 arm64: tlbflush: avoid writing RES0 bits
Several of the bits of the TLBI register operand are RES0 per the ARM
ARM, so TLBI operations should avoid writing non-zero values to these
bits.

This patch adds a macro __TLBI_VADDR(addr, asid) that creates the
operand register in the correct format and honors the RES0 bits.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Philip Elcan <pelcan@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 15:20:17 +01:00

224 lines
5.7 KiB
C

/*
* Based on arch/arm/include/asm/tlbflush.h
*
* Copyright (C) 1999-2003 Russell King
* Copyright (C) 2012 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ASM_TLBFLUSH_H
#define __ASM_TLBFLUSH_H
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <asm/cputype.h>
#include <asm/mmu.h>
/*
* Raw TLBI operations.
*
* Where necessary, use the __tlbi() macro to avoid asm()
* boilerplate. Drivers and most kernel code should use the TLB
* management routines in preference to the macro below.
*
* The macro can be used as __tlbi(op) or __tlbi(op, arg), depending
* on whether a particular TLBI operation takes an argument or
* not. The macros handles invoking the asm with or without the
* register argument as appropriate.
*/
#define __TLBI_0(op, arg) asm ("tlbi " #op "\n" \
ALTERNATIVE("nop\n nop", \
"dsb ish\n tlbi " #op, \
ARM64_WORKAROUND_REPEAT_TLBI, \
CONFIG_QCOM_FALKOR_ERRATUM_1009) \
: : )
#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0\n" \
ALTERNATIVE("nop\n nop", \
"dsb ish\n tlbi " #op ", %0", \
ARM64_WORKAROUND_REPEAT_TLBI, \
CONFIG_QCOM_FALKOR_ERRATUM_1009) \
: : "r" (arg))
#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg)
#define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0)
#define __tlbi_user(op, arg) do { \
if (arm64_kernel_unmapped_at_el0()) \
__tlbi(op, (arg) | USER_ASID_FLAG); \
} while (0)
/* This macro creates a properly formatted VA operand for the TLBI */
#define __TLBI_VADDR(addr, asid) \
({ \
unsigned long __ta = (addr) >> 12; \
__ta &= GENMASK_ULL(43, 0); \
__ta |= (unsigned long)(asid) << 48; \
__ta; \
})
/*
* TLB Management
* ==============
*
* The TLB specific code is expected to perform whatever tests it needs
* to determine if it should invalidate the TLB for each call. Start
* addresses are inclusive and end addresses are exclusive; it is safe to
* round these addresses down.
*
* flush_tlb_all()
*
* Invalidate the entire TLB.
*
* flush_tlb_mm(mm)
*
* Invalidate all TLB entries in a particular address space.
* - mm - mm_struct describing address space
*
* flush_tlb_range(mm,start,end)
*
* Invalidate a range of TLB entries in the specified address
* space.
* - mm - mm_struct describing address space
* - start - start address (may not be aligned)
* - end - end address (exclusive, may not be aligned)
*
* flush_tlb_page(vaddr,vma)
*
* Invalidate the specified page in the specified address range.
* - vaddr - virtual address (may not be aligned)
* - vma - vma_struct describing address range
*
* flush_kern_tlb_page(kaddr)
*
* Invalidate the TLB entry for the specified page. The address
* will be in the kernels virtual memory space. Current uses
* only require the D-TLB to be invalidated.
* - kaddr - Kernel virtual memory address
*/
static inline void local_flush_tlb_all(void)
{
dsb(nshst);
__tlbi(vmalle1);
dsb(nsh);
isb();
}
static inline void flush_tlb_all(void)
{
dsb(ishst);
__tlbi(vmalle1is);
dsb(ish);
isb();
}
static inline void flush_tlb_mm(struct mm_struct *mm)
{
unsigned long asid = __TLBI_VADDR(0, ASID(mm));
dsb(ishst);
__tlbi(aside1is, asid);
__tlbi_user(aside1is, asid);
dsb(ish);
}
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long uaddr)
{
unsigned long addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm));
dsb(ishst);
__tlbi(vale1is, addr);
__tlbi_user(vale1is, addr);
dsb(ish);
}
/*
* This is meant to avoid soft lock-ups on large TLB flushing ranges and not
* necessarily a performance improvement.
*/
#define MAX_TLB_RANGE (1024UL << PAGE_SHIFT)
static inline void __flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end,
bool last_level)
{
unsigned long asid = ASID(vma->vm_mm);
unsigned long addr;
if ((end - start) > MAX_TLB_RANGE) {
flush_tlb_mm(vma->vm_mm);
return;
}
start = __TLBI_VADDR(start, asid);
end = __TLBI_VADDR(end, asid);
dsb(ishst);
for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) {
if (last_level) {
__tlbi(vale1is, addr);
__tlbi_user(vale1is, addr);
} else {
__tlbi(vae1is, addr);
__tlbi_user(vae1is, addr);
}
}
dsb(ish);
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
__flush_tlb_range(vma, start, end, false);
}
static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
unsigned long addr;
if ((end - start) > MAX_TLB_RANGE) {
flush_tlb_all();
return;
}
start = __TLBI_VADDR(start, 0);
end = __TLBI_VADDR(end, 0);
dsb(ishst);
for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12))
__tlbi(vaae1is, addr);
dsb(ish);
isb();
}
/*
* Used to invalidate the TLB (walk caches) corresponding to intermediate page
* table levels (pgd/pud/pmd).
*/
static inline void __flush_tlb_pgtable(struct mm_struct *mm,
unsigned long uaddr)
{
unsigned long addr = __TLBI_VADDR(uaddr, ASID(mm));
__tlbi(vae1is, addr);
__tlbi_user(vae1is, addr);
dsb(ish);
}
#endif
#endif