linux_dsm_epyc7002/arch/arm/boot/dts/vf-colibri.dtsi
Stefan Agner 2afa06cbf1 ARM: dts: vf-colibri: add CAN support
Add Colibri standard pinmux for FlexCAN controller instances. CAN
is not a standard Colibri feature, but the datasheet predefines
pins which provide CAN (compatible across some modules). Hence,
add the pinmux on module level.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:38 +08:00

268 lines
5.0 KiB
Plaintext

/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/ {
bl: backlight {
compatible = "pwm-backlight";
pwms = <&pwm0 0 5000000 0>;
status = "disabled";
};
};
&adc0 {
status = "okay";
};
&adc1 {
status = "okay";
};
&can0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan0>;
status = "disabled";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "disabled";
};
&dspi1 {
bus-num = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dspi1>;
};
&edma0 {
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
};
&i2c0 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
};
&nfc {
assigned-clocks = <&clks VF610_CLK_NFC>;
assigned-clock-rates = <33000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
status = "okay";
nand@0 {
compatible = "fsl,vf610-nfc-nandcs";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-ecc-strength = <32>;
nand-ecc-step-size = <2048>;
nand-on-flash-bbt;
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
};
&usbdev0 {
disable-over-current;
status = "okay";
};
&usbh1 {
disable-over-current;
status = "okay";
};
&usbmisc0 {
status = "okay";
};
&usbmisc1 {
status = "okay";
};
&usbphy0 {
status = "okay";
};
&usbphy1 {
status = "okay";
};
&iomuxc {
vf610-colibri {
pinctrl_flexcan0: can0grp {
fsl,pins = <
VF610_PAD_PTB14__CAN0_RX 0x31F1
VF610_PAD_PTB15__CAN0_TX 0x31F2
>;
};
pinctrl_flexcan1: can1grp {
fsl,pins = <
VF610_PAD_PTB16__CAN1_RX 0x31F1
VF610_PAD_PTB17__CAN1_TX 0x31F2
>;
};
pinctrl_gpio_ext: gpio_ext {
fsl,pins = <
VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
>;
};
pinctrl_dspi1: dspi1grp {
fsl,pins = <
VF610_PAD_PTD5__DSPI1_CS0 0x33e2
VF610_PAD_PTD6__DSPI1_SIN 0x33e1
VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
VF610_PAD_PTD8__DSPI1_SCK 0x33e2
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTB20__GPIO_42 0x219d
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKOUT 0x30d2
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
VF610_PAD_PTB15__I2C0_SDA 0x37ff
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
VF610_PAD_PTD23__NF_IO7 0x28df
VF610_PAD_PTD22__NF_IO6 0x28df
VF610_PAD_PTD21__NF_IO5 0x28df
VF610_PAD_PTD20__NF_IO4 0x28df
VF610_PAD_PTD19__NF_IO3 0x28df
VF610_PAD_PTD18__NF_IO2 0x28df
VF610_PAD_PTD17__NF_IO1 0x28df
VF610_PAD_PTD16__NF_IO0 0x28df
VF610_PAD_PTB24__NF_WE_B 0x28c2
VF610_PAD_PTB25__NF_CE0_B 0x28c2
VF610_PAD_PTB27__NF_RE_B 0x28c2
VF610_PAD_PTC26__NF_RB_B 0x283d
VF610_PAD_PTC27__NF_ALE 0x28c2
VF610_PAD_PTC28__NF_CLE 0x28c2
>;
};
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1182
VF610_PAD_PTB1__FTM0_CH1 0x1182
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
VF610_PAD_PTB8__FTM1_CH0 0x1182
VF610_PAD_PTB9__FTM1_CH1 0x1182
>;
};
pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
VF610_PAD_PTB4__UART1_TX 0x21a2
VF610_PAD_PTB5__UART1_RX 0x21a1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTD0__UART2_TX 0x21a2
VF610_PAD_PTD1__UART2_RX 0x21a1
VF610_PAD_PTD2__UART2_RTS 0x21a2
VF610_PAD_PTD3__UART2_CTS 0x21a1
>;
};
pinctrl_usbh1_reg: gpio_usb_vbus {
fsl,pins = <
VF610_PAD_PTD4__GPIO_83 0x22ed
>;
};
};
};