mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 15:50:57 +07:00
cbfaea96ac
There is only one valid pinctrl setting for NAND on Kirkwood. Now that we have the setting in the common SoC pinctrl, move it to the NAND controller node directly and remove it from the individual boards. While at it, also fix up status = "okay" to "ok" on one board's NAND node. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-12-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
235 lines
5.1 KiB
Plaintext
235 lines
5.1 KiB
Plaintext
#include "kirkwood.dtsi"
|
|
#include "kirkwood-6281.dtsi"
|
|
|
|
/ {
|
|
model = "D-Link DNS NASes (kirkwood-based)";
|
|
compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&pmx_button_power &pmx_button_unmount
|
|
&pmx_button_reset>;
|
|
pinctrl-names = "default";
|
|
|
|
button@1 {
|
|
label = "Power button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
button@2 {
|
|
label = "USB unmount button";
|
|
linux,code = <KEY_EJECTCD>;
|
|
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
button@3 {
|
|
label = "Reset button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio_fan {
|
|
/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
|
|
compatible = "gpio-fan";
|
|
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 14 GPIO_ACTIVE_LOW
|
|
&gpio1 13 GPIO_ACTIVE_LOW>;
|
|
gpio-fan,speed-map = <0 0
|
|
3000 1
|
|
6000 2>;
|
|
};
|
|
|
|
gpio_poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&pmx_power_off>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
pinctrl: pin-controller@10000 {
|
|
|
|
pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
|
|
&pmx_present_sata1 &pmx_fan_tacho
|
|
&pmx_temp_alarm>;
|
|
pinctrl-names = "default";
|
|
|
|
pmx_sata0: pmx-sata0 {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "sata1";
|
|
};
|
|
pmx_sata1: pmx-sata1 {
|
|
marvell,pins = "mpp21";
|
|
marvell,function = "sata0";
|
|
};
|
|
pmx_led_power: pmx-led-power {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_right_hdd: pmx-led-red-right-hdd {
|
|
marvell,pins = "mpp27";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_left_hdd: pmx-led-red-left-hdd {
|
|
marvell,pins = "mpp28";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_usb_325: pmx-led-red-usb-325 {
|
|
marvell,pins = "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_button_power: pmx-button-power {
|
|
marvell,pins = "mpp34";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_usb_320: pmx-led-red-usb-320 {
|
|
marvell,pins = "mpp35";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_off: pmx-power-off {
|
|
marvell,pins = "mpp36";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_back_on: pmx-power-back-on {
|
|
marvell,pins = "mpp37";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_sata0: pmx-power-sata0 {
|
|
marvell,pins = "mpp39";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_sata1: pmx-power-sata1 {
|
|
marvell,pins = "mpp40";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_present_sata0: pmx-present-sata0 {
|
|
marvell,pins = "mpp41";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_present_sata1: pmx-present-sata1 {
|
|
marvell,pins = "mpp42";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_white_usb: pmx-led-white-usb {
|
|
marvell,pins = "mpp43";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_fan_tacho: pmx-fan-tacho {
|
|
marvell,pins = "mpp44";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_fan_high_speed: pmx-fan-high-speed {
|
|
marvell,pins = "mpp45";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_fan_low_speed: pmx-fan-low-speed {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_button_unmount: pmx-button-unmount {
|
|
marvell,pins = "mpp47";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_button_reset: pmx-button-reset {
|
|
marvell,pins = "mpp48";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_temp_alarm: pmx-temp-alarm {
|
|
marvell,pins = "mpp49";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
sata@80000 {
|
|
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
nr-ports = <2>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
|
|
pinctrl-names = "default";
|
|
|
|
sata0_power: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "SATA0 Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 7 0>;
|
|
};
|
|
sata1_power: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "SATA1 Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 8 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
chip-delay = <35>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "uImage";
|
|
reg = <0x0100000 0x500000>;
|
|
};
|
|
|
|
partition@600000 {
|
|
label = "ramdisk";
|
|
reg = <0x0600000 0x500000>;
|
|
};
|
|
|
|
partition@b00000 {
|
|
label = "image";
|
|
reg = <0x0b00000 0x6600000>;
|
|
};
|
|
|
|
partition@7100000 {
|
|
label = "mini firmware";
|
|
reg = <0x7100000 0xa00000>;
|
|
};
|
|
|
|
partition@7b00000 {
|
|
label = "config";
|
|
reg = <0x7b00000 0x500000>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
|
|
ethphy0: ethernet-phy@8 {
|
|
reg = <8>;
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
ethernet0-port@0 {
|
|
phy-handle = <ðphy0>;
|
|
};
|
|
};
|