mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 02:06:49 +07:00
4c945e8556
Add support for the SolidRun Armada 388 Clearfog A1 board. This board has an Armada 388 microsom, dedicated gigabit ethernet, six switched gigabit ethernet ports, SFP cage, two Mini-PCIe/mSATA slots, a m.2 SATA slot, and a MikroBUS connector to allow MikroBUS modules to be added. This DT file adds support for all board facilities with the exception of full SFP support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
457 lines
10 KiB
Plaintext
457 lines
10 KiB
Plaintext
/*
|
|
* Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
|
|
*
|
|
* Copyright (C) 2015 Russell King
|
|
*
|
|
* This board is in development; the contents of this file work with
|
|
* the A1 rev 2.0 of the board, which does not represent final
|
|
* production board. Things will change, don't expect this file to
|
|
* remain compatible info the future.
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This file is distributed in the hope that it will be useful
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "armada-388.dtsi"
|
|
#include "armada-38x-solidrun-microsom.dtsi"
|
|
|
|
/ {
|
|
model = "SolidRun Clearfog A1";
|
|
compatible = "solidrun,clearfog-a1", "marvell,armada388",
|
|
"marvell,armada385", "marvell,armada380";
|
|
|
|
aliases {
|
|
/* So that mvebu u-boot can update the MAC addresses */
|
|
ethernet1 = ð0;
|
|
ethernet2 = ð1;
|
|
ethernet3 = ð2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
soc {
|
|
internal-regs {
|
|
ethernet@30000 {
|
|
phy-mode = "sgmii";
|
|
status = "okay";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
ethernet@34000 {
|
|
phy-mode = "sgmii";
|
|
status = "okay";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
i2c@11000 {
|
|
/* Is there anything on this? */
|
|
clock-frequency = <100000>;
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
/*
|
|
* PCA9655 GPIO expander, up to 1MHz clock.
|
|
* 0-CON3 CLKREQ#
|
|
* 1-CON3 PERST#
|
|
* 2-CON2 PERST#
|
|
* 3-CON3 W_DISABLE
|
|
* 4-CON2 CLKREQ#
|
|
* 5-USB3 overcurrent
|
|
* 6-USB3 power
|
|
* 7-CON2 W_DISABLE
|
|
* 8-JP4 P1
|
|
* 9-JP4 P4
|
|
* 10-JP4 P5
|
|
* 11-m.2 DEVSLP
|
|
* 12-SFP_LOS
|
|
* 13-SFP_TX_FAULT
|
|
* 14-SFP_TX_DISABLE
|
|
* 15-SFP_MOD_DEF0
|
|
*/
|
|
expander0: gpio-expander@20 {
|
|
/*
|
|
* This is how it should be:
|
|
* compatible = "onnn,pca9655",
|
|
* "nxp,pca9555";
|
|
* but you can't do this because of
|
|
* the way I2C works.
|
|
*/
|
|
compatible = "nxp,pca9555";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0x20>;
|
|
|
|
pcie1_0_clkreq {
|
|
gpio-hog;
|
|
gpios = <0 GPIO_ACTIVE_LOW>;
|
|
input;
|
|
line-name = "pcie1.0-clkreq";
|
|
};
|
|
pcie1_0_w_disable {
|
|
gpio-hog;
|
|
gpios = <3 GPIO_ACTIVE_LOW>;
|
|
output-low;
|
|
line-name = "pcie1.0-w-disable";
|
|
};
|
|
pcie2_0_clkreq {
|
|
gpio-hog;
|
|
gpios = <4 GPIO_ACTIVE_LOW>;
|
|
input;
|
|
line-name = "pcie2.0-clkreq";
|
|
};
|
|
pcie2_0_w_disable {
|
|
gpio-hog;
|
|
gpios = <7 GPIO_ACTIVE_LOW>;
|
|
output-low;
|
|
line-name = "pcie2.0-w-disable";
|
|
};
|
|
usb3_ilimit {
|
|
gpio-hog;
|
|
gpios = <5 GPIO_ACTIVE_LOW>;
|
|
input;
|
|
line-name = "usb3-current-limit";
|
|
};
|
|
usb3_power {
|
|
gpio-hog;
|
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "usb3-power";
|
|
};
|
|
m2_devslp {
|
|
gpio-hog;
|
|
gpios = <11 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
line-name = "m.2 devslp";
|
|
};
|
|
sfp_los {
|
|
/* SFP loss of signal */
|
|
gpio-hog;
|
|
gpios = <12 GPIO_ACTIVE_HIGH>;
|
|
input;
|
|
line-name = "sfp-los";
|
|
};
|
|
sfp_tx_fault {
|
|
/* SFP laser fault */
|
|
gpio-hog;
|
|
gpios = <13 GPIO_ACTIVE_HIGH>;
|
|
input;
|
|
line-name = "sfp-tx-fault";
|
|
};
|
|
sfp_tx_disable {
|
|
/* SFP transmit disable */
|
|
gpio-hog;
|
|
gpios = <14 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
line-name = "sfp-tx-disable";
|
|
};
|
|
sfp_mod_def0 {
|
|
/* SFP module present */
|
|
gpio-hog;
|
|
gpios = <15 GPIO_ACTIVE_LOW>;
|
|
input;
|
|
line-name = "sfp-mod-def0";
|
|
};
|
|
};
|
|
|
|
/* The MCP3021 is 100kHz clock only */
|
|
mikrobus_adc: mcp3021@4c {
|
|
compatible = "microchip,mcp3021";
|
|
reg = <0x4c>;
|
|
};
|
|
|
|
/* Also something at 0x64 */
|
|
};
|
|
|
|
i2c@11100 {
|
|
/*
|
|
* Routed to SFP, mikrobus, and PCIe.
|
|
* SFP limits this to 100kHz, and requires
|
|
* an AT24C01A/02/04 with address pins tied
|
|
* low, which takes addresses 0x50 and 0x51.
|
|
* Mikrobus doesn't specify beyond an I2C
|
|
* bus being present.
|
|
* PCIe uses ARP to assign addresses, or
|
|
* 0x63-0x64.
|
|
*/
|
|
clock-frequency = <100000>;
|
|
pinctrl-0 = <&clearfog_i2c1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
mdio@72004 {
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy_dedicated: ethernet-phy@0 {
|
|
/*
|
|
* Annoyingly, the marvell phy driver
|
|
* configures the LED register, rather
|
|
* than preserving reset-loaded setting.
|
|
* We undo that rubbish here.
|
|
*/
|
|
marvell,reg-init = <3 16 0 0x101e>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
pinctrl@18000 {
|
|
clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "ref";
|
|
};
|
|
clearfog_dsa0_pins: clearfog-dsa0-pins {
|
|
marvell,pins = "mpp23", "mpp41";
|
|
marvell,function = "gpio";
|
|
};
|
|
clearfog_i2c1_pins: i2c1-pins {
|
|
/* SFP, PCIe, mSATA, mikrobus */
|
|
marvell,pins = "mpp26", "mpp27";
|
|
marvell,function = "i2c1";
|
|
};
|
|
clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "gpio";
|
|
};
|
|
clearfog_sdhci_pins: clearfog-sdhci-pins {
|
|
marvell,pins = "mpp21", "mpp28",
|
|
"mpp37", "mpp38",
|
|
"mpp39", "mpp40";
|
|
marvell,function = "sd0";
|
|
};
|
|
clearfog_spi1_cs_pins: spi1-cs-pins {
|
|
marvell,pins = "mpp55";
|
|
marvell,function = "spi1";
|
|
};
|
|
mikro_pins: mikro-pins {
|
|
/* int: mpp22 rst: mpp29 */
|
|
marvell,pins = "mpp22", "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
mikro_spi_pins: mikro-spi-pins {
|
|
marvell,pins = "mpp43";
|
|
marvell,function = "spi1";
|
|
};
|
|
mikro_uart_pins: mikro-uart-pins {
|
|
marvell,pins = "mpp24", "mpp25";
|
|
marvell,function = "ua1";
|
|
};
|
|
rear_button_pins: rear-button-pins {
|
|
marvell,pins = "mpp34";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
sata@a8000 {
|
|
/* pinctrl? */
|
|
status = "okay";
|
|
};
|
|
|
|
sata@e0000 {
|
|
/* pinctrl? */
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
pinctrl-0 = <&clearfog_sdhci_pins
|
|
&clearfog_sdhci_cd_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
vmmc = <®_3p3v>;
|
|
wp-inverted;
|
|
};
|
|
|
|
serial@12100 {
|
|
/* mikrobus uart */
|
|
pinctrl-0 = <&mikro_uart_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
spi@10680 {
|
|
/*
|
|
* We don't seem to have the W25Q32 on the
|
|
* A1 Rev 2.0 boards, so disable SPI.
|
|
* CS0: W25Q32 (doesn't appear to be present)
|
|
* CS1:
|
|
* CS2: mikrobus
|
|
*/
|
|
pinctrl-0 = <&spi1_pins
|
|
&clearfog_spi1_cs_pins
|
|
&mikro_spi_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "w25q32", "jedec,spi-nor";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <3000000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usb@58000 {
|
|
/* CON3, nearest power. */
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@f0000 {
|
|
/* CON2, nearest CPU, USB2 only. */
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@f8000 {
|
|
/* CON7 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
/*
|
|
* The two PCIe units are accessible through
|
|
* the mini-PCIe connectors on the board.
|
|
*/
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0. CON3, nearest power. */
|
|
reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
pcie@3,0 {
|
|
/* Port 2, Lane 0. CON2, nearest CPU. */
|
|
reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
dsa@0 {
|
|
compatible = "marvell,dsa";
|
|
dsa,ethernet = <ð1>;
|
|
dsa,mii-bus = <&mdio>;
|
|
pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
switch@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4 0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan5";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "cpu";
|
|
};
|
|
|
|
port@6 {
|
|
/* 88E1512 external phy */
|
|
reg = <6>;
|
|
label = "lan6";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&rear_button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
button_0 {
|
|
/* The rear SW3 button */
|
|
label = "Rear Button";
|
|
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
|
linux,can-disable;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
};
|
|
};
|