mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-08 03:46:43 +07:00
eae17754ab
Currently there are two possible platform datas for the PXA AC97 driver: one supported by the generic AC97 driver only which provides callbacks to allow board-specific configuration at stream startup and teardown, and another for pxa2xx-ac97-lib which allows configuration of the reset GPIO for PXA2xx CPUs. Obviously this won't actually work when using the generic AC97 driver since the drivers will attempt to parse the platform data in both formats. Fix this by merging the two structures. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
457 lines
9.8 KiB
C
457 lines
9.8 KiB
C
/*
|
|
* Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
|
|
* which contain:
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Dec 02, 2004
|
|
* Copyright: MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <mach/regs-ac97.h>
|
|
#include <mach/pxa2xx-gpio.h>
|
|
#include <mach/audio.h>
|
|
|
|
static DEFINE_MUTEX(car_mutex);
|
|
static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
|
|
static volatile long gsr_bits;
|
|
static struct clk *ac97_clk;
|
|
static struct clk *ac97conf_clk;
|
|
static int reset_gpio;
|
|
|
|
/*
|
|
* Beware PXA27x bugs:
|
|
*
|
|
* o Slot 12 read from modem space will hang controller.
|
|
* o CDONE, SDONE interrupt fails after any slot 12 IO.
|
|
*
|
|
* We therefore have an hybrid approach for waiting on SDONE (interrupt or
|
|
* 1 jiffy timeout if interrupt never comes).
|
|
*/
|
|
|
|
enum {
|
|
RESETGPIO_FORCE_HIGH,
|
|
RESETGPIO_FORCE_LOW,
|
|
RESETGPIO_NORMAL_ALTFUNC
|
|
};
|
|
|
|
/**
|
|
* set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
|
|
* @mode: chosen action
|
|
*
|
|
* As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
|
|
* must be done to insure proper work of AC97 reset line. This function
|
|
* computes the correct gpio_mode for further use by reset functions, and
|
|
* applied the change through pxa_gpio_mode.
|
|
*/
|
|
static void set_resetgpio_mode(int resetgpio_action)
|
|
{
|
|
int mode = 0;
|
|
|
|
if (reset_gpio)
|
|
switch (resetgpio_action) {
|
|
case RESETGPIO_NORMAL_ALTFUNC:
|
|
if (reset_gpio == 113)
|
|
mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
|
|
if (reset_gpio == 95)
|
|
mode = 95 | GPIO_ALT_FN_1_OUT;
|
|
break;
|
|
case RESETGPIO_FORCE_LOW:
|
|
mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
|
|
break;
|
|
case RESETGPIO_FORCE_HIGH:
|
|
mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
|
|
break;
|
|
};
|
|
|
|
if (mode)
|
|
pxa_gpio_mode(mode);
|
|
}
|
|
|
|
unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
|
|
{
|
|
unsigned short val = -1;
|
|
volatile u32 *reg_addr;
|
|
|
|
mutex_lock(&car_mutex);
|
|
|
|
/* set up primary or secondary codec space */
|
|
if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
|
|
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
|
|
else
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
reg_addr += (reg >> 1);
|
|
|
|
/* start read access across the ac97 link */
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
val = *reg_addr;
|
|
if (reg == AC97_GPIO_STATUS)
|
|
goto out;
|
|
if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 &&
|
|
!((GSR | gsr_bits) & GSR_SDONE)) {
|
|
printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
|
|
__func__, reg, GSR | gsr_bits);
|
|
val = -1;
|
|
goto out;
|
|
}
|
|
|
|
/* valid data now */
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
val = *reg_addr;
|
|
/* but we've just started another cycle... */
|
|
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
|
|
|
|
out: mutex_unlock(&car_mutex);
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);
|
|
|
|
void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
volatile u32 *reg_addr;
|
|
|
|
mutex_lock(&car_mutex);
|
|
|
|
/* set up primary or secondary codec space */
|
|
if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
|
|
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
|
|
else
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
reg_addr += (reg >> 1);
|
|
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
*reg_addr = val;
|
|
if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 &&
|
|
!((GSR | gsr_bits) & GSR_CDONE))
|
|
printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
|
|
__func__, reg, GSR | gsr_bits);
|
|
|
|
mutex_unlock(&car_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);
|
|
|
|
#ifdef CONFIG_PXA25x
|
|
static inline void pxa_ac97_warm_pxa25x(void)
|
|
{
|
|
gsr_bits = 0;
|
|
|
|
GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
|
|
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
|
|
}
|
|
|
|
static inline void pxa_ac97_cold_pxa25x(void)
|
|
{
|
|
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
|
|
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
|
|
|
|
gsr_bits = 0;
|
|
|
|
GCR = GCR_COLD_RST;
|
|
GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
|
|
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
static inline void pxa_ac97_warm_pxa27x(void)
|
|
{
|
|
gsr_bits = 0;
|
|
|
|
/* warm reset broken on Bulverde,
|
|
so manually keep AC97 reset high */
|
|
set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
|
|
udelay(10);
|
|
GCR |= GCR_WARM_RST;
|
|
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
|
|
udelay(500);
|
|
}
|
|
|
|
static inline void pxa_ac97_cold_pxa27x(void)
|
|
{
|
|
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
|
|
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
|
|
|
|
gsr_bits = 0;
|
|
|
|
/* PXA27x Developers Manual section 13.5.2.2.1 */
|
|
clk_enable(ac97conf_clk);
|
|
udelay(5);
|
|
clk_disable(ac97conf_clk);
|
|
GCR = GCR_COLD_RST;
|
|
udelay(50);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA3xx
|
|
static inline void pxa_ac97_warm_pxa3xx(void)
|
|
{
|
|
int timeout = 100;
|
|
|
|
gsr_bits = 0;
|
|
|
|
/* Can't use interrupts */
|
|
GCR |= GCR_WARM_RST;
|
|
while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
|
|
mdelay(1);
|
|
}
|
|
|
|
static inline void pxa_ac97_cold_pxa3xx(void)
|
|
{
|
|
int timeout = 1000;
|
|
|
|
/* Hold CLKBPB for 100us */
|
|
GCR = 0;
|
|
GCR = GCR_CLKBPB;
|
|
udelay(100);
|
|
GCR = 0;
|
|
|
|
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
|
|
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
|
|
|
|
gsr_bits = 0;
|
|
|
|
/* Can't use interrupts on PXA3xx */
|
|
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
|
|
|
|
GCR = GCR_WARM_RST | GCR_COLD_RST;
|
|
while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
|
|
mdelay(10);
|
|
}
|
|
#endif
|
|
|
|
bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
|
|
{
|
|
unsigned long gsr;
|
|
|
|
#ifdef CONFIG_PXA25x
|
|
if (cpu_is_pxa25x())
|
|
pxa_ac97_warm_pxa25x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA27x
|
|
if (cpu_is_pxa27x())
|
|
pxa_ac97_warm_pxa27x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA3xx
|
|
if (cpu_is_pxa3xx())
|
|
pxa_ac97_warm_pxa3xx();
|
|
else
|
|
#endif
|
|
BUG();
|
|
gsr = GSR | gsr_bits;
|
|
if (!(gsr & (GSR_PCR | GSR_SCR))) {
|
|
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
|
|
__func__, gsr);
|
|
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
|
|
|
|
bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
|
|
{
|
|
unsigned long gsr;
|
|
|
|
#ifdef CONFIG_PXA25x
|
|
if (cpu_is_pxa25x())
|
|
pxa_ac97_cold_pxa25x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA27x
|
|
if (cpu_is_pxa27x())
|
|
pxa_ac97_cold_pxa27x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA3xx
|
|
if (cpu_is_pxa3xx())
|
|
pxa_ac97_cold_pxa3xx();
|
|
else
|
|
#endif
|
|
BUG();
|
|
|
|
gsr = GSR | gsr_bits;
|
|
if (!(gsr & (GSR_PCR | GSR_SCR))) {
|
|
printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
|
|
__func__, gsr);
|
|
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);
|
|
|
|
|
|
void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97)
|
|
{
|
|
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
|
|
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);
|
|
|
|
static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
|
|
{
|
|
long status;
|
|
|
|
status = GSR;
|
|
if (status) {
|
|
GSR = status;
|
|
gsr_bits |= status;
|
|
wake_up(&gsr_wq);
|
|
|
|
/* Although we don't use those we still need to clear them
|
|
since they tend to spuriously trigger when MMC is used
|
|
(hardware bug? go figure)... */
|
|
if (cpu_is_pxa27x()) {
|
|
MISR = MISR_EOC;
|
|
PISR = PISR_EOC;
|
|
MCSR = MCSR_EOC;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
int pxa2xx_ac97_hw_suspend(void)
|
|
{
|
|
GCR |= GCR_ACLINK_OFF;
|
|
clk_disable(ac97_clk);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
|
|
|
|
int pxa2xx_ac97_hw_resume(void)
|
|
{
|
|
if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
|
|
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
|
|
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
|
|
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
|
|
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
|
|
}
|
|
if (cpu_is_pxa27x()) {
|
|
/* Use GPIO 113 or 95 as AC97 Reset on Bulverde */
|
|
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
|
|
}
|
|
clk_enable(ac97_clk);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
|
|
#endif
|
|
|
|
int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
|
|
{
|
|
int ret;
|
|
pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
|
|
|
|
if (pdata) {
|
|
switch (pdata->reset_gpio) {
|
|
case 95:
|
|
case 113:
|
|
reset_gpio = pdata->reset_gpio;
|
|
break;
|
|
case 0:
|
|
reset_gpio = 113;
|
|
break;
|
|
case -1:
|
|
break;
|
|
default:
|
|
dev_err(&dev->dev, "Invalid reset GPIO %d\n",
|
|
pdata->reset_gpio);
|
|
}
|
|
} else {
|
|
if (cpu_is_pxa27x())
|
|
reset_gpio = 113;
|
|
}
|
|
|
|
if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
|
|
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
|
|
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
|
|
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
|
|
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
|
|
}
|
|
|
|
if (cpu_is_pxa27x()) {
|
|
/* Use GPIO 113 as AC97 Reset on Bulverde */
|
|
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
|
|
ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
|
|
if (IS_ERR(ac97conf_clk)) {
|
|
ret = PTR_ERR(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
goto err_conf;
|
|
}
|
|
}
|
|
|
|
ac97_clk = clk_get(&dev->dev, "AC97CLK");
|
|
if (IS_ERR(ac97_clk)) {
|
|
ret = PTR_ERR(ac97_clk);
|
|
ac97_clk = NULL;
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = clk_enable(ac97_clk);
|
|
if (ret)
|
|
goto err_clk2;
|
|
|
|
ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
|
|
if (ret < 0)
|
|
goto err_irq;
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
GCR |= GCR_ACLINK_OFF;
|
|
err_clk2:
|
|
clk_put(ac97_clk);
|
|
ac97_clk = NULL;
|
|
err_clk:
|
|
if (ac97conf_clk) {
|
|
clk_put(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
}
|
|
err_conf:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
|
|
|
|
void pxa2xx_ac97_hw_remove(struct platform_device *dev)
|
|
{
|
|
GCR |= GCR_ACLINK_OFF;
|
|
free_irq(IRQ_AC97, NULL);
|
|
if (ac97conf_clk) {
|
|
clk_put(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
}
|
|
clk_disable(ac97_clk);
|
|
clk_put(ac97_clk);
|
|
ac97_clk = NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);
|
|
|
|
MODULE_AUTHOR("Nicolas Pitre");
|
|
MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
|
|
MODULE_LICENSE("GPL");
|
|
|