mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 16:16:39 +07:00
ab7f580b8e
When RTC CLKTRCTRL bit is configured in HW_AUTO, module goes to sleep in IDLE state. The Alarm SWakeup event can be used to wakeup the RTC when it is in IDLE state. In order to do so, the alarm needs to be set and enabled before RTC enters the IDLE state. Also the wakeup generation for alarm/timer event needs to be set (bits [1:0] in RTC_IRQWAKEEN register). Currently RTC_IRQWAKEEN bits are set only in suspend/resume paths. With this ALARM interrupts are not generated when it enters IDLE state. So programming the RTC_IRQWAKEEN bits when ever ALARM is set. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
583 lines
16 KiB
C
583 lines
16 KiB
C
/*
|
|
* TI OMAP1 Real Time Clock interface for Linux
|
|
*
|
|
* Copyright (C) 2003 MontaVista Software, Inc.
|
|
* Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
|
|
*
|
|
* Copyright (C) 2006 David Brownell (new RTC framework)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/io.h>
|
|
|
|
/* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
|
|
* with century-range alarm matching, driven by the 32kHz clock.
|
|
*
|
|
* The main user-visible ways it differs from PC RTCs are by omitting
|
|
* "don't care" alarm fields and sub-second periodic IRQs, and having
|
|
* an autoadjust mechanism to calibrate to the true oscillator rate.
|
|
*
|
|
* Board-specific wiring options include using split power mode with
|
|
* RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
|
|
* and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
|
|
* low power modes) for OMAP1 boards (OMAP-L138 has this built into
|
|
* the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment.
|
|
*/
|
|
|
|
#define DRIVER_NAME "omap_rtc"
|
|
|
|
#define OMAP_RTC_BASE 0xfffb4800
|
|
|
|
/* RTC registers */
|
|
#define OMAP_RTC_SECONDS_REG 0x00
|
|
#define OMAP_RTC_MINUTES_REG 0x04
|
|
#define OMAP_RTC_HOURS_REG 0x08
|
|
#define OMAP_RTC_DAYS_REG 0x0C
|
|
#define OMAP_RTC_MONTHS_REG 0x10
|
|
#define OMAP_RTC_YEARS_REG 0x14
|
|
#define OMAP_RTC_WEEKS_REG 0x18
|
|
|
|
#define OMAP_RTC_ALARM_SECONDS_REG 0x20
|
|
#define OMAP_RTC_ALARM_MINUTES_REG 0x24
|
|
#define OMAP_RTC_ALARM_HOURS_REG 0x28
|
|
#define OMAP_RTC_ALARM_DAYS_REG 0x2c
|
|
#define OMAP_RTC_ALARM_MONTHS_REG 0x30
|
|
#define OMAP_RTC_ALARM_YEARS_REG 0x34
|
|
|
|
#define OMAP_RTC_CTRL_REG 0x40
|
|
#define OMAP_RTC_STATUS_REG 0x44
|
|
#define OMAP_RTC_INTERRUPTS_REG 0x48
|
|
|
|
#define OMAP_RTC_COMP_LSB_REG 0x4c
|
|
#define OMAP_RTC_COMP_MSB_REG 0x50
|
|
#define OMAP_RTC_OSC_REG 0x54
|
|
|
|
#define OMAP_RTC_KICK0_REG 0x6c
|
|
#define OMAP_RTC_KICK1_REG 0x70
|
|
|
|
#define OMAP_RTC_IRQWAKEEN 0x7c
|
|
|
|
/* OMAP_RTC_CTRL_REG bit fields: */
|
|
#define OMAP_RTC_CTRL_SPLIT BIT(7)
|
|
#define OMAP_RTC_CTRL_DISABLE BIT(6)
|
|
#define OMAP_RTC_CTRL_SET_32_COUNTER BIT(5)
|
|
#define OMAP_RTC_CTRL_TEST BIT(4)
|
|
#define OMAP_RTC_CTRL_MODE_12_24 BIT(3)
|
|
#define OMAP_RTC_CTRL_AUTO_COMP BIT(2)
|
|
#define OMAP_RTC_CTRL_ROUND_30S BIT(1)
|
|
#define OMAP_RTC_CTRL_STOP BIT(0)
|
|
|
|
/* OMAP_RTC_STATUS_REG bit fields: */
|
|
#define OMAP_RTC_STATUS_POWER_UP BIT(7)
|
|
#define OMAP_RTC_STATUS_ALARM BIT(6)
|
|
#define OMAP_RTC_STATUS_1D_EVENT BIT(5)
|
|
#define OMAP_RTC_STATUS_1H_EVENT BIT(4)
|
|
#define OMAP_RTC_STATUS_1M_EVENT BIT(3)
|
|
#define OMAP_RTC_STATUS_1S_EVENT BIT(2)
|
|
#define OMAP_RTC_STATUS_RUN BIT(1)
|
|
#define OMAP_RTC_STATUS_BUSY BIT(0)
|
|
|
|
/* OMAP_RTC_INTERRUPTS_REG bit fields: */
|
|
#define OMAP_RTC_INTERRUPTS_IT_ALARM BIT(3)
|
|
#define OMAP_RTC_INTERRUPTS_IT_TIMER BIT(2)
|
|
|
|
/* OMAP_RTC_OSC_REG bit fields: */
|
|
#define OMAP_RTC_OSC_32KCLK_EN BIT(6)
|
|
|
|
/* OMAP_RTC_IRQWAKEEN bit fields: */
|
|
#define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1)
|
|
|
|
/* OMAP_RTC_KICKER values */
|
|
#define KICK0_VALUE 0x83e70b13
|
|
#define KICK1_VALUE 0x95a4f1e0
|
|
|
|
#define OMAP_RTC_HAS_KICKER BIT(0)
|
|
|
|
/*
|
|
* Few RTC IP revisions has special WAKE-EN Register to enable Wakeup
|
|
* generation for event Alarm.
|
|
*/
|
|
#define OMAP_RTC_HAS_IRQWAKEEN BIT(1)
|
|
|
|
/*
|
|
* Some RTC IP revisions (like those in AM335x and DRA7x) need
|
|
* the 32KHz clock to be explicitly enabled.
|
|
*/
|
|
#define OMAP_RTC_HAS_32KCLK_EN BIT(2)
|
|
|
|
static void __iomem *rtc_base;
|
|
|
|
#define rtc_read(addr) readb(rtc_base + (addr))
|
|
#define rtc_write(val, addr) writeb(val, rtc_base + (addr))
|
|
|
|
#define rtc_writel(val, addr) writel(val, rtc_base + (addr))
|
|
|
|
|
|
/* we rely on the rtc framework to handle locking (rtc->ops_lock),
|
|
* so the only other requirement is that register accesses which
|
|
* require BUSY to be clear are made with IRQs locally disabled
|
|
*/
|
|
static void rtc_wait_not_busy(void)
|
|
{
|
|
int count = 0;
|
|
u8 status;
|
|
|
|
/* BUSY may stay active for 1/32768 second (~30 usec) */
|
|
for (count = 0; count < 50; count++) {
|
|
status = rtc_read(OMAP_RTC_STATUS_REG);
|
|
if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
/* now we have ~15 usec to read/write various registers */
|
|
}
|
|
|
|
static irqreturn_t rtc_irq(int irq, void *rtc)
|
|
{
|
|
unsigned long events = 0;
|
|
u8 irq_data;
|
|
|
|
irq_data = rtc_read(OMAP_RTC_STATUS_REG);
|
|
|
|
/* alarm irq? */
|
|
if (irq_data & OMAP_RTC_STATUS_ALARM) {
|
|
rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
|
|
events |= RTC_IRQF | RTC_AF;
|
|
}
|
|
|
|
/* 1/sec periodic/update irq? */
|
|
if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
|
|
events |= RTC_IRQF | RTC_UF;
|
|
|
|
rtc_update_irq(rtc, 1, events);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
u8 reg, irqwake_reg = 0;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(pdev);
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
|
|
irqwake_reg = rtc_read(OMAP_RTC_IRQWAKEEN);
|
|
|
|
if (enabled) {
|
|
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
} else {
|
|
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
}
|
|
rtc_wait_not_busy();
|
|
rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
|
|
rtc_write(irqwake_reg, OMAP_RTC_IRQWAKEEN);
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* this hardware doesn't support "don't care" alarm fields */
|
|
static int tm2bcd(struct rtc_time *tm)
|
|
{
|
|
if (rtc_valid_tm(tm) != 0)
|
|
return -EINVAL;
|
|
|
|
tm->tm_sec = bin2bcd(tm->tm_sec);
|
|
tm->tm_min = bin2bcd(tm->tm_min);
|
|
tm->tm_hour = bin2bcd(tm->tm_hour);
|
|
tm->tm_mday = bin2bcd(tm->tm_mday);
|
|
|
|
tm->tm_mon = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/* epoch == 1900 */
|
|
if (tm->tm_year < 100 || tm->tm_year > 199)
|
|
return -EINVAL;
|
|
tm->tm_year = bin2bcd(tm->tm_year - 100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcd2tm(struct rtc_time *tm)
|
|
{
|
|
tm->tm_sec = bcd2bin(tm->tm_sec);
|
|
tm->tm_min = bcd2bin(tm->tm_min);
|
|
tm->tm_hour = bcd2bin(tm->tm_hour);
|
|
tm->tm_mday = bcd2bin(tm->tm_mday);
|
|
tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
|
|
/* epoch == 1900 */
|
|
tm->tm_year = bcd2bin(tm->tm_year) + 100;
|
|
}
|
|
|
|
|
|
static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
/* we don't report wday/yday/isdst ... */
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG);
|
|
tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG);
|
|
tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG);
|
|
tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG);
|
|
tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG);
|
|
tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
bcd2tm(tm);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
if (tm2bcd(tm) < 0)
|
|
return -EINVAL;
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG);
|
|
rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG);
|
|
rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG);
|
|
rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG);
|
|
rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG);
|
|
rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG);
|
|
alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG);
|
|
alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG);
|
|
alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG);
|
|
alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG);
|
|
alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
bcd2tm(&alm->time);
|
|
alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
|
|
& OMAP_RTC_INTERRUPTS_IT_ALARM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
u8 reg, irqwake_reg = 0;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(pdev);
|
|
|
|
if (tm2bcd(&alm->time) < 0)
|
|
return -EINVAL;
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG);
|
|
rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG);
|
|
rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG);
|
|
rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG);
|
|
rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG);
|
|
rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);
|
|
|
|
reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
|
|
irqwake_reg = rtc_read(OMAP_RTC_IRQWAKEEN);
|
|
|
|
if (alm->enabled) {
|
|
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
} else {
|
|
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
}
|
|
rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
|
|
rtc_write(irqwake_reg, OMAP_RTC_IRQWAKEEN);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct rtc_class_ops omap_rtc_ops = {
|
|
.read_time = omap_rtc_read_time,
|
|
.set_time = omap_rtc_set_time,
|
|
.read_alarm = omap_rtc_read_alarm,
|
|
.set_alarm = omap_rtc_set_alarm,
|
|
.alarm_irq_enable = omap_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static int omap_rtc_alarm;
|
|
static int omap_rtc_timer;
|
|
|
|
#define OMAP_RTC_DATA_AM3352_IDX 1
|
|
#define OMAP_RTC_DATA_DA830_IDX 2
|
|
|
|
static struct platform_device_id omap_rtc_devtype[] = {
|
|
{
|
|
.name = DRIVER_NAME,
|
|
},
|
|
[OMAP_RTC_DATA_AM3352_IDX] = {
|
|
.name = "am3352-rtc",
|
|
.driver_data = OMAP_RTC_HAS_KICKER | OMAP_RTC_HAS_IRQWAKEEN |
|
|
OMAP_RTC_HAS_32KCLK_EN,
|
|
},
|
|
[OMAP_RTC_DATA_DA830_IDX] = {
|
|
.name = "da830-rtc",
|
|
.driver_data = OMAP_RTC_HAS_KICKER,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, omap_rtc_devtype);
|
|
|
|
static const struct of_device_id omap_rtc_of_match[] = {
|
|
{ .compatible = "ti,da830-rtc",
|
|
.data = &omap_rtc_devtype[OMAP_RTC_DATA_DA830_IDX],
|
|
},
|
|
{ .compatible = "ti,am3352-rtc",
|
|
.data = &omap_rtc_devtype[OMAP_RTC_DATA_AM3352_IDX],
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_rtc_of_match);
|
|
|
|
static int __init omap_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct rtc_device *rtc;
|
|
u8 reg, new_ctrl;
|
|
const struct platform_device_id *id_entry;
|
|
const struct of_device_id *of_id;
|
|
|
|
of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
|
|
if (of_id)
|
|
pdev->id_entry = of_id->data;
|
|
|
|
id_entry = platform_get_device_id(pdev);
|
|
if (!id_entry) {
|
|
dev_err(&pdev->dev, "no matching device entry\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
omap_rtc_timer = platform_get_irq(pdev, 0);
|
|
if (omap_rtc_timer <= 0) {
|
|
pr_debug("%s: no update irq?\n", pdev->name);
|
|
return -ENOENT;
|
|
}
|
|
|
|
omap_rtc_alarm = platform_get_irq(pdev, 1);
|
|
if (omap_rtc_alarm <= 0) {
|
|
pr_debug("%s: no alarm irq?\n", pdev->name);
|
|
return -ENOENT;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
rtc_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rtc_base))
|
|
return PTR_ERR(rtc_base);
|
|
|
|
/* Enable the clock/module so that we can access the registers */
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_KICKER) {
|
|
rtc_writel(KICK0_VALUE, OMAP_RTC_KICK0_REG);
|
|
rtc_writel(KICK1_VALUE, OMAP_RTC_KICK1_REG);
|
|
}
|
|
|
|
rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&omap_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc)) {
|
|
pr_debug("%s: can't register RTC device, err %ld\n",
|
|
pdev->name, PTR_ERR(rtc));
|
|
goto fail0;
|
|
}
|
|
platform_set_drvdata(pdev, rtc);
|
|
|
|
/* clear pending irqs, and set 1/second periodic,
|
|
* which we'll use instead of update irqs
|
|
*/
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
/* enable RTC functional clock */
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_32KCLK_EN)
|
|
rtc_writel(OMAP_RTC_OSC_32KCLK_EN, OMAP_RTC_OSC_REG);
|
|
|
|
/* clear old status */
|
|
reg = rtc_read(OMAP_RTC_STATUS_REG);
|
|
if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
|
|
pr_info("%s: RTC power up reset detected\n",
|
|
pdev->name);
|
|
rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
|
|
}
|
|
if (reg & (u8) OMAP_RTC_STATUS_ALARM)
|
|
rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
|
|
|
|
/* handle periodic and alarm irqs */
|
|
if (devm_request_irq(&pdev->dev, omap_rtc_timer, rtc_irq, 0,
|
|
dev_name(&rtc->dev), rtc)) {
|
|
pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
|
|
pdev->name, omap_rtc_timer);
|
|
goto fail0;
|
|
}
|
|
if ((omap_rtc_timer != omap_rtc_alarm) &&
|
|
(devm_request_irq(&pdev->dev, omap_rtc_alarm, rtc_irq, 0,
|
|
dev_name(&rtc->dev), rtc))) {
|
|
pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
|
|
pdev->name, omap_rtc_alarm);
|
|
goto fail0;
|
|
}
|
|
|
|
/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
|
|
reg = rtc_read(OMAP_RTC_CTRL_REG);
|
|
if (reg & (u8) OMAP_RTC_CTRL_STOP)
|
|
pr_info("%s: already running\n", pdev->name);
|
|
|
|
/* force to 24 hour mode */
|
|
new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
|
|
new_ctrl |= OMAP_RTC_CTRL_STOP;
|
|
|
|
/* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
|
|
*
|
|
* - Device wake-up capability setting should come through chip
|
|
* init logic. OMAP1 boards should initialize the "wakeup capable"
|
|
* flag in the platform device if the board is wired right for
|
|
* being woken up by RTC alarm. For OMAP-L138, this capability
|
|
* is built into the SoC by the "Deep Sleep" capability.
|
|
*
|
|
* - Boards wired so RTC_ON_nOFF is used as the reset signal,
|
|
* rather than nPWRON_RESET, should forcibly enable split
|
|
* power mode. (Some chip errata report that RTC_CTRL_SPLIT
|
|
* is write-only, and always reads as zero...)
|
|
*/
|
|
|
|
device_init_wakeup(&pdev->dev, true);
|
|
|
|
if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
|
|
pr_info("%s: split power mode\n", pdev->name);
|
|
|
|
if (reg != new_ctrl)
|
|
rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);
|
|
|
|
return 0;
|
|
|
|
fail0:
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_KICKER)
|
|
rtc_writel(0, OMAP_RTC_KICK0_REG);
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
return -EIO;
|
|
}
|
|
|
|
static int __exit omap_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(pdev);
|
|
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
|
|
/* leave rtc running, but disable irqs */
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
if (id_entry->driver_data & OMAP_RTC_HAS_KICKER)
|
|
rtc_writel(0, OMAP_RTC_KICK0_REG);
|
|
|
|
/* Disable the clock/module */
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static u8 irqstat;
|
|
|
|
static int omap_rtc_suspend(struct device *dev)
|
|
{
|
|
irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
/* FIXME the RTC alarm is not currently acting as a wakeup event
|
|
* source on some platforms, and in fact this enable() call is just
|
|
* saving a flag that's never used...
|
|
*/
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(omap_rtc_alarm);
|
|
else
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
/* Disable the clock/module */
|
|
pm_runtime_put_sync(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_resume(struct device *dev)
|
|
{
|
|
/* Enable the clock/module so that we can access the registers */
|
|
pm_runtime_get_sync(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(omap_rtc_alarm);
|
|
else
|
|
rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume);
|
|
|
|
static void omap_rtc_shutdown(struct platform_device *pdev)
|
|
{
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
}
|
|
|
|
MODULE_ALIAS("platform:omap_rtc");
|
|
static struct platform_driver omap_rtc_driver = {
|
|
.remove = __exit_p(omap_rtc_remove),
|
|
.shutdown = omap_rtc_shutdown,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &omap_rtc_pm_ops,
|
|
.of_match_table = omap_rtc_of_match,
|
|
},
|
|
.id_table = omap_rtc_devtype,
|
|
};
|
|
|
|
module_platform_driver_probe(omap_rtc_driver, omap_rtc_probe);
|
|
|
|
MODULE_AUTHOR("George G. Davis (and others)");
|
|
MODULE_LICENSE("GPL");
|