mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 19:55:28 +07:00
8385d756e1
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since28361c4036
the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes:28361c4036
("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Add missing export of ata_qc_get_active(), as per Pali. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2485 lines
67 KiB
C
2485 lines
67 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* sata_nv.c - NVIDIA nForce SATA
|
|
*
|
|
* Copyright 2004 NVIDIA Corp. All rights reserved.
|
|
* Copyright 2004 Andrew Chew
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/driver-api/libata.rst
|
|
*
|
|
* No hardware documentation available outside of NVIDIA.
|
|
* This driver programs the NVIDIA SATA controller in a similar
|
|
* fashion as with other PCI IDE BMDMA controllers, with a few
|
|
* NV-specific details such as register offsets, SATA phy location,
|
|
* hotplug info, etc.
|
|
*
|
|
* CK804/MCP04 controllers support an alternate programming interface
|
|
* similar to the ADMA specification (with some modifications).
|
|
* This allows the use of NCQ. Non-DMA-mapped ATA commands are still
|
|
* sent through the legacy interface.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_nv"
|
|
#define DRV_VERSION "3.5"
|
|
|
|
#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL
|
|
|
|
enum {
|
|
NV_MMIO_BAR = 5,
|
|
|
|
NV_PORTS = 2,
|
|
NV_PIO_MASK = ATA_PIO4,
|
|
NV_MWDMA_MASK = ATA_MWDMA2,
|
|
NV_UDMA_MASK = ATA_UDMA6,
|
|
NV_PORT0_SCR_REG_OFFSET = 0x00,
|
|
NV_PORT1_SCR_REG_OFFSET = 0x40,
|
|
|
|
/* INT_STATUS/ENABLE */
|
|
NV_INT_STATUS = 0x10,
|
|
NV_INT_ENABLE = 0x11,
|
|
NV_INT_STATUS_CK804 = 0x440,
|
|
NV_INT_ENABLE_CK804 = 0x441,
|
|
|
|
/* INT_STATUS/ENABLE bits */
|
|
NV_INT_DEV = 0x01,
|
|
NV_INT_PM = 0x02,
|
|
NV_INT_ADDED = 0x04,
|
|
NV_INT_REMOVED = 0x08,
|
|
|
|
NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */
|
|
|
|
NV_INT_ALL = 0x0f,
|
|
NV_INT_MASK = NV_INT_DEV |
|
|
NV_INT_ADDED | NV_INT_REMOVED,
|
|
|
|
/* INT_CONFIG */
|
|
NV_INT_CONFIG = 0x12,
|
|
NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI
|
|
|
|
// For PCI config register 20
|
|
NV_MCP_SATA_CFG_20 = 0x50,
|
|
NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04,
|
|
NV_MCP_SATA_CFG_20_PORT0_EN = (1 << 17),
|
|
NV_MCP_SATA_CFG_20_PORT1_EN = (1 << 16),
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14),
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12),
|
|
|
|
NV_ADMA_MAX_CPBS = 32,
|
|
NV_ADMA_CPB_SZ = 128,
|
|
NV_ADMA_APRD_SZ = 16,
|
|
NV_ADMA_SGTBL_LEN = (1024 - NV_ADMA_CPB_SZ) /
|
|
NV_ADMA_APRD_SZ,
|
|
NV_ADMA_SGTBL_TOTAL_LEN = NV_ADMA_SGTBL_LEN + 5,
|
|
NV_ADMA_SGTBL_SZ = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ,
|
|
NV_ADMA_PORT_PRIV_DMA_SZ = NV_ADMA_MAX_CPBS *
|
|
(NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ),
|
|
|
|
/* BAR5 offset to ADMA general registers */
|
|
NV_ADMA_GEN = 0x400,
|
|
NV_ADMA_GEN_CTL = 0x00,
|
|
NV_ADMA_NOTIFIER_CLEAR = 0x30,
|
|
|
|
/* BAR5 offset to ADMA ports */
|
|
NV_ADMA_PORT = 0x480,
|
|
|
|
/* size of ADMA port register space */
|
|
NV_ADMA_PORT_SIZE = 0x100,
|
|
|
|
/* ADMA port registers */
|
|
NV_ADMA_CTL = 0x40,
|
|
NV_ADMA_CPB_COUNT = 0x42,
|
|
NV_ADMA_NEXT_CPB_IDX = 0x43,
|
|
NV_ADMA_STAT = 0x44,
|
|
NV_ADMA_CPB_BASE_LOW = 0x48,
|
|
NV_ADMA_CPB_BASE_HIGH = 0x4C,
|
|
NV_ADMA_APPEND = 0x50,
|
|
NV_ADMA_NOTIFIER = 0x68,
|
|
NV_ADMA_NOTIFIER_ERROR = 0x6C,
|
|
|
|
/* NV_ADMA_CTL register bits */
|
|
NV_ADMA_CTL_HOTPLUG_IEN = (1 << 0),
|
|
NV_ADMA_CTL_CHANNEL_RESET = (1 << 5),
|
|
NV_ADMA_CTL_GO = (1 << 7),
|
|
NV_ADMA_CTL_AIEN = (1 << 8),
|
|
NV_ADMA_CTL_READ_NON_COHERENT = (1 << 11),
|
|
NV_ADMA_CTL_WRITE_NON_COHERENT = (1 << 12),
|
|
|
|
/* CPB response flag bits */
|
|
NV_CPB_RESP_DONE = (1 << 0),
|
|
NV_CPB_RESP_ATA_ERR = (1 << 3),
|
|
NV_CPB_RESP_CMD_ERR = (1 << 4),
|
|
NV_CPB_RESP_CPB_ERR = (1 << 7),
|
|
|
|
/* CPB control flag bits */
|
|
NV_CPB_CTL_CPB_VALID = (1 << 0),
|
|
NV_CPB_CTL_QUEUE = (1 << 1),
|
|
NV_CPB_CTL_APRD_VALID = (1 << 2),
|
|
NV_CPB_CTL_IEN = (1 << 3),
|
|
NV_CPB_CTL_FPDMA = (1 << 4),
|
|
|
|
/* APRD flags */
|
|
NV_APRD_WRITE = (1 << 1),
|
|
NV_APRD_END = (1 << 2),
|
|
NV_APRD_CONT = (1 << 3),
|
|
|
|
/* NV_ADMA_STAT flags */
|
|
NV_ADMA_STAT_TIMEOUT = (1 << 0),
|
|
NV_ADMA_STAT_HOTUNPLUG = (1 << 1),
|
|
NV_ADMA_STAT_HOTPLUG = (1 << 2),
|
|
NV_ADMA_STAT_CPBERR = (1 << 4),
|
|
NV_ADMA_STAT_SERROR = (1 << 5),
|
|
NV_ADMA_STAT_CMD_COMPLETE = (1 << 6),
|
|
NV_ADMA_STAT_IDLE = (1 << 8),
|
|
NV_ADMA_STAT_LEGACY = (1 << 9),
|
|
NV_ADMA_STAT_STOPPED = (1 << 10),
|
|
NV_ADMA_STAT_DONE = (1 << 12),
|
|
NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR |
|
|
NV_ADMA_STAT_TIMEOUT,
|
|
|
|
/* port flags */
|
|
NV_ADMA_PORT_REGISTER_MODE = (1 << 0),
|
|
NV_ADMA_ATAPI_SETUP_COMPLETE = (1 << 1),
|
|
|
|
/* MCP55 reg offset */
|
|
NV_CTL_MCP55 = 0x400,
|
|
NV_INT_STATUS_MCP55 = 0x440,
|
|
NV_INT_ENABLE_MCP55 = 0x444,
|
|
NV_NCQ_REG_MCP55 = 0x448,
|
|
|
|
/* MCP55 */
|
|
NV_INT_ALL_MCP55 = 0xffff,
|
|
NV_INT_PORT_SHIFT_MCP55 = 16, /* each port occupies 16 bits */
|
|
NV_INT_MASK_MCP55 = NV_INT_ALL_MCP55 & 0xfffd,
|
|
|
|
/* SWNCQ ENABLE BITS*/
|
|
NV_CTL_PRI_SWNCQ = 0x02,
|
|
NV_CTL_SEC_SWNCQ = 0x04,
|
|
|
|
/* SW NCQ status bits*/
|
|
NV_SWNCQ_IRQ_DEV = (1 << 0),
|
|
NV_SWNCQ_IRQ_PM = (1 << 1),
|
|
NV_SWNCQ_IRQ_ADDED = (1 << 2),
|
|
NV_SWNCQ_IRQ_REMOVED = (1 << 3),
|
|
|
|
NV_SWNCQ_IRQ_BACKOUT = (1 << 4),
|
|
NV_SWNCQ_IRQ_SDBFIS = (1 << 5),
|
|
NV_SWNCQ_IRQ_DHREGFIS = (1 << 6),
|
|
NV_SWNCQ_IRQ_DMASETUP = (1 << 7),
|
|
|
|
NV_SWNCQ_IRQ_HOTPLUG = NV_SWNCQ_IRQ_ADDED |
|
|
NV_SWNCQ_IRQ_REMOVED,
|
|
|
|
};
|
|
|
|
/* ADMA Physical Region Descriptor - one SG segment */
|
|
struct nv_adma_prd {
|
|
__le64 addr;
|
|
__le32 len;
|
|
u8 flags;
|
|
u8 packet_len;
|
|
__le16 reserved;
|
|
};
|
|
|
|
enum nv_adma_regbits {
|
|
CMDEND = (1 << 15), /* end of command list */
|
|
WNB = (1 << 14), /* wait-not-BSY */
|
|
IGN = (1 << 13), /* ignore this entry */
|
|
CS1n = (1 << (4 + 8)), /* std. PATA signals follow... */
|
|
DA2 = (1 << (2 + 8)),
|
|
DA1 = (1 << (1 + 8)),
|
|
DA0 = (1 << (0 + 8)),
|
|
};
|
|
|
|
/* ADMA Command Parameter Block
|
|
The first 5 SG segments are stored inside the Command Parameter Block itself.
|
|
If there are more than 5 segments the remainder are stored in a separate
|
|
memory area indicated by next_aprd. */
|
|
struct nv_adma_cpb {
|
|
u8 resp_flags; /* 0 */
|
|
u8 reserved1; /* 1 */
|
|
u8 ctl_flags; /* 2 */
|
|
/* len is length of taskfile in 64 bit words */
|
|
u8 len; /* 3 */
|
|
u8 tag; /* 4 */
|
|
u8 next_cpb_idx; /* 5 */
|
|
__le16 reserved2; /* 6-7 */
|
|
__le16 tf[12]; /* 8-31 */
|
|
struct nv_adma_prd aprd[5]; /* 32-111 */
|
|
__le64 next_aprd; /* 112-119 */
|
|
__le64 reserved3; /* 120-127 */
|
|
};
|
|
|
|
|
|
struct nv_adma_port_priv {
|
|
struct nv_adma_cpb *cpb;
|
|
dma_addr_t cpb_dma;
|
|
struct nv_adma_prd *aprd;
|
|
dma_addr_t aprd_dma;
|
|
void __iomem *ctl_block;
|
|
void __iomem *gen_block;
|
|
void __iomem *notifier_clear_block;
|
|
u64 adma_dma_mask;
|
|
u8 flags;
|
|
int last_issue_ncq;
|
|
};
|
|
|
|
struct nv_host_priv {
|
|
unsigned long type;
|
|
};
|
|
|
|
struct defer_queue {
|
|
u32 defer_bits;
|
|
unsigned int head;
|
|
unsigned int tail;
|
|
unsigned int tag[ATA_MAX_QUEUE];
|
|
};
|
|
|
|
enum ncq_saw_flag_list {
|
|
ncq_saw_d2h = (1U << 0),
|
|
ncq_saw_dmas = (1U << 1),
|
|
ncq_saw_sdb = (1U << 2),
|
|
ncq_saw_backout = (1U << 3),
|
|
};
|
|
|
|
struct nv_swncq_port_priv {
|
|
struct ata_bmdma_prd *prd; /* our SG list */
|
|
dma_addr_t prd_dma; /* and its DMA mapping */
|
|
void __iomem *sactive_block;
|
|
void __iomem *irq_block;
|
|
void __iomem *tag_block;
|
|
u32 qc_active;
|
|
|
|
unsigned int last_issue_tag;
|
|
|
|
/* fifo circular queue to store deferral command */
|
|
struct defer_queue defer_queue;
|
|
|
|
/* for NCQ interrupt analysis */
|
|
u32 dhfis_bits;
|
|
u32 dmafis_bits;
|
|
u32 sdbfis_bits;
|
|
|
|
unsigned int ncq_flags;
|
|
};
|
|
|
|
|
|
#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & (1 << (19 + (12 * (PORT)))))
|
|
|
|
static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int nv_pci_device_resume(struct pci_dev *pdev);
|
|
#endif
|
|
static void nv_ck804_host_stop(struct ata_host *host);
|
|
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance);
|
|
static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance);
|
|
static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
|
|
static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
|
|
static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
|
|
|
|
static int nv_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline);
|
|
static void nv_nf2_freeze(struct ata_port *ap);
|
|
static void nv_nf2_thaw(struct ata_port *ap);
|
|
static void nv_ck804_freeze(struct ata_port *ap);
|
|
static void nv_ck804_thaw(struct ata_port *ap);
|
|
static int nv_adma_slave_config(struct scsi_device *sdev);
|
|
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc);
|
|
static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
|
|
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance);
|
|
static void nv_adma_irq_clear(struct ata_port *ap);
|
|
static int nv_adma_port_start(struct ata_port *ap);
|
|
static void nv_adma_port_stop(struct ata_port *ap);
|
|
#ifdef CONFIG_PM
|
|
static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg);
|
|
static int nv_adma_port_resume(struct ata_port *ap);
|
|
#endif
|
|
static void nv_adma_freeze(struct ata_port *ap);
|
|
static void nv_adma_thaw(struct ata_port *ap);
|
|
static void nv_adma_error_handler(struct ata_port *ap);
|
|
static void nv_adma_host_stop(struct ata_host *host);
|
|
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
|
|
|
|
static void nv_mcp55_thaw(struct ata_port *ap);
|
|
static void nv_mcp55_freeze(struct ata_port *ap);
|
|
static void nv_swncq_error_handler(struct ata_port *ap);
|
|
static int nv_swncq_slave_config(struct scsi_device *sdev);
|
|
static int nv_swncq_port_start(struct ata_port *ap);
|
|
static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc);
|
|
static void nv_swncq_fill_sg(struct ata_queued_cmd *qc);
|
|
static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc);
|
|
static void nv_swncq_irq_clear(struct ata_port *ap, u16 fis);
|
|
static irqreturn_t nv_swncq_interrupt(int irq, void *dev_instance);
|
|
#ifdef CONFIG_PM
|
|
static int nv_swncq_port_suspend(struct ata_port *ap, pm_message_t mesg);
|
|
static int nv_swncq_port_resume(struct ata_port *ap);
|
|
#endif
|
|
|
|
enum nv_host_type
|
|
{
|
|
GENERIC,
|
|
NFORCE2,
|
|
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
|
|
CK804,
|
|
ADMA,
|
|
MCP5x,
|
|
SWNCQ,
|
|
};
|
|
|
|
static const struct pci_device_id nv_pci_tbl[] = {
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), NFORCE2 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), NFORCE3 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), NFORCE3 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver nv_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = nv_pci_tbl,
|
|
.probe = nv_init_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = nv_pci_device_resume,
|
|
#endif
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static struct scsi_host_template nv_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct scsi_host_template nv_adma_sht = {
|
|
ATA_NCQ_SHT(DRV_NAME),
|
|
.can_queue = NV_ADMA_MAX_CPBS,
|
|
.sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
|
|
.dma_boundary = NV_ADMA_DMA_BOUNDARY,
|
|
.slave_configure = nv_adma_slave_config,
|
|
};
|
|
|
|
static struct scsi_host_template nv_swncq_sht = {
|
|
ATA_NCQ_SHT(DRV_NAME),
|
|
.can_queue = ATA_MAX_QUEUE - 1,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = nv_swncq_slave_config,
|
|
};
|
|
|
|
/*
|
|
* NV SATA controllers have various different problems with hardreset
|
|
* protocol depending on the specific controller and device.
|
|
*
|
|
* GENERIC:
|
|
*
|
|
* bko11195 reports that link doesn't come online after hardreset on
|
|
* generic nv's and there have been several other similar reports on
|
|
* linux-ide.
|
|
*
|
|
* bko12351#c23 reports that warmplug on MCP61 doesn't work with
|
|
* softreset.
|
|
*
|
|
* NF2/3:
|
|
*
|
|
* bko3352 reports nf2/3 controllers can't determine device signature
|
|
* reliably after hardreset. The following thread reports detection
|
|
* failure on cold boot with the standard debouncing timing.
|
|
*
|
|
* http://thread.gmane.org/gmane.linux.ide/34098
|
|
*
|
|
* bko12176 reports that hardreset fails to bring up the link during
|
|
* boot on nf2.
|
|
*
|
|
* CK804:
|
|
*
|
|
* For initial probing after boot and hot plugging, hardreset mostly
|
|
* works fine on CK804 but curiously, reprobing on the initial port
|
|
* by rescanning or rmmod/insmod fails to acquire the initial D2H Reg
|
|
* FIS in somewhat undeterministic way.
|
|
*
|
|
* SWNCQ:
|
|
*
|
|
* bko12351 reports that when SWNCQ is enabled, for hotplug to work,
|
|
* hardreset should be used and hardreset can't report proper
|
|
* signature, which suggests that mcp5x is closer to nf2 as long as
|
|
* reset quirkiness is concerned.
|
|
*
|
|
* bko12703 reports that boot probing fails for intel SSD with
|
|
* hardreset. Link fails to come online. Softreset works fine.
|
|
*
|
|
* The failures are varied but the following patterns seem true for
|
|
* all flavors.
|
|
*
|
|
* - Softreset during boot always works.
|
|
*
|
|
* - Hardreset during boot sometimes fails to bring up the link on
|
|
* certain comibnations and device signature acquisition is
|
|
* unreliable.
|
|
*
|
|
* - Hardreset is often necessary after hotplug.
|
|
*
|
|
* So, preferring softreset for boot probing and error handling (as
|
|
* hardreset might bring down the link) but using hardreset for
|
|
* post-boot probing should work around the above issues in most
|
|
* cases. Define nv_hardreset() which only kicks in for post-boot
|
|
* probing and use it for all variants.
|
|
*/
|
|
static struct ata_port_operations nv_generic_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.lost_interrupt = ATA_OP_NULL,
|
|
.scr_read = nv_scr_read,
|
|
.scr_write = nv_scr_write,
|
|
.hardreset = nv_hardreset,
|
|
};
|
|
|
|
static struct ata_port_operations nv_nf2_ops = {
|
|
.inherits = &nv_generic_ops,
|
|
.freeze = nv_nf2_freeze,
|
|
.thaw = nv_nf2_thaw,
|
|
};
|
|
|
|
static struct ata_port_operations nv_ck804_ops = {
|
|
.inherits = &nv_generic_ops,
|
|
.freeze = nv_ck804_freeze,
|
|
.thaw = nv_ck804_thaw,
|
|
.host_stop = nv_ck804_host_stop,
|
|
};
|
|
|
|
static struct ata_port_operations nv_adma_ops = {
|
|
.inherits = &nv_ck804_ops,
|
|
|
|
.check_atapi_dma = nv_adma_check_atapi_dma,
|
|
.sff_tf_read = nv_adma_tf_read,
|
|
.qc_defer = ata_std_qc_defer,
|
|
.qc_prep = nv_adma_qc_prep,
|
|
.qc_issue = nv_adma_qc_issue,
|
|
.sff_irq_clear = nv_adma_irq_clear,
|
|
|
|
.freeze = nv_adma_freeze,
|
|
.thaw = nv_adma_thaw,
|
|
.error_handler = nv_adma_error_handler,
|
|
.post_internal_cmd = nv_adma_post_internal_cmd,
|
|
|
|
.port_start = nv_adma_port_start,
|
|
.port_stop = nv_adma_port_stop,
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = nv_adma_port_suspend,
|
|
.port_resume = nv_adma_port_resume,
|
|
#endif
|
|
.host_stop = nv_adma_host_stop,
|
|
};
|
|
|
|
static struct ata_port_operations nv_swncq_ops = {
|
|
.inherits = &nv_generic_ops,
|
|
|
|
.qc_defer = ata_std_qc_defer,
|
|
.qc_prep = nv_swncq_qc_prep,
|
|
.qc_issue = nv_swncq_qc_issue,
|
|
|
|
.freeze = nv_mcp55_freeze,
|
|
.thaw = nv_mcp55_thaw,
|
|
.error_handler = nv_swncq_error_handler,
|
|
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = nv_swncq_port_suspend,
|
|
.port_resume = nv_swncq_port_resume,
|
|
#endif
|
|
.port_start = nv_swncq_port_start,
|
|
};
|
|
|
|
struct nv_pi_priv {
|
|
irq_handler_t irq_handler;
|
|
struct scsi_host_template *sht;
|
|
};
|
|
|
|
#define NV_PI_PRIV(_irq_handler, _sht) \
|
|
&(struct nv_pi_priv){ .irq_handler = _irq_handler, .sht = _sht }
|
|
|
|
static const struct ata_port_info nv_port_info[] = {
|
|
/* generic */
|
|
{
|
|
.flags = ATA_FLAG_SATA,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_generic_ops,
|
|
.private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
|
|
},
|
|
/* nforce2/3 */
|
|
{
|
|
.flags = ATA_FLAG_SATA,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_nf2_ops,
|
|
.private_data = NV_PI_PRIV(nv_nf2_interrupt, &nv_sht),
|
|
},
|
|
/* ck804 */
|
|
{
|
|
.flags = ATA_FLAG_SATA,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_ck804_ops,
|
|
.private_data = NV_PI_PRIV(nv_ck804_interrupt, &nv_sht),
|
|
},
|
|
/* ADMA */
|
|
{
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NCQ,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_adma_ops,
|
|
.private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
|
|
},
|
|
/* MCP5x */
|
|
{
|
|
.flags = ATA_FLAG_SATA,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_generic_ops,
|
|
.private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
|
|
},
|
|
/* SWNCQ */
|
|
{
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NCQ,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_swncq_ops,
|
|
.private_data = NV_PI_PRIV(nv_swncq_interrupt, &nv_swncq_sht),
|
|
},
|
|
};
|
|
|
|
MODULE_AUTHOR("NVIDIA");
|
|
MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static bool adma_enabled;
|
|
static bool swncq_enabled = true;
|
|
static bool msi_enabled;
|
|
|
|
static void nv_adma_register_mode(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp, status;
|
|
int count = 0;
|
|
|
|
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
|
|
return;
|
|
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
while (!(status & NV_ADMA_STAT_IDLE) && count < 20) {
|
|
ndelay(50);
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
count++;
|
|
}
|
|
if (count == 20)
|
|
ata_port_warn(ap, "timeout waiting for ADMA IDLE, stat=0x%hx\n",
|
|
status);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
|
|
|
|
count = 0;
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
while (!(status & NV_ADMA_STAT_LEGACY) && count < 20) {
|
|
ndelay(50);
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
count++;
|
|
}
|
|
if (count == 20)
|
|
ata_port_warn(ap,
|
|
"timeout waiting for ADMA LEGACY, stat=0x%hx\n",
|
|
status);
|
|
|
|
pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
|
|
}
|
|
|
|
static void nv_adma_mode(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp, status;
|
|
int count = 0;
|
|
|
|
if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
|
|
return;
|
|
|
|
WARN_ON(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
|
|
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
while (((status & NV_ADMA_STAT_LEGACY) ||
|
|
!(status & NV_ADMA_STAT_IDLE)) && count < 20) {
|
|
ndelay(50);
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
count++;
|
|
}
|
|
if (count == 20)
|
|
ata_port_warn(ap,
|
|
"timeout waiting for ADMA LEGACY clear and IDLE, stat=0x%hx\n",
|
|
status);
|
|
|
|
pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
|
|
}
|
|
|
|
static int nv_adma_slave_config(struct scsi_device *sdev)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
struct nv_adma_port_priv *port0, *port1;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
unsigned long segment_boundary, flags;
|
|
unsigned short sg_tablesize;
|
|
int rc;
|
|
int adma_enable;
|
|
u32 current_reg, new_reg, config_mask;
|
|
|
|
rc = ata_scsi_slave_config(sdev);
|
|
|
|
if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
|
|
/* Not a proper libata device, ignore */
|
|
return rc;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
if (ap->link.device[sdev->id].class == ATA_DEV_ATAPI) {
|
|
/*
|
|
* NVIDIA reports that ADMA mode does not support ATAPI commands.
|
|
* Therefore ATAPI commands are sent through the legacy interface.
|
|
* However, the legacy interface only supports 32-bit DMA.
|
|
* Restrict DMA parameters as required by the legacy interface
|
|
* when an ATAPI device is connected.
|
|
*/
|
|
segment_boundary = ATA_DMA_BOUNDARY;
|
|
/* Subtract 1 since an extra entry may be needed for padding, see
|
|
libata-scsi.c */
|
|
sg_tablesize = LIBATA_MAX_PRD - 1;
|
|
|
|
/* Since the legacy DMA engine is in use, we need to disable ADMA
|
|
on the port. */
|
|
adma_enable = 0;
|
|
nv_adma_register_mode(ap);
|
|
} else {
|
|
segment_boundary = NV_ADMA_DMA_BOUNDARY;
|
|
sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
|
|
adma_enable = 1;
|
|
}
|
|
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, ¤t_reg);
|
|
|
|
if (ap->port_no == 1)
|
|
config_mask = NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
|
|
else
|
|
config_mask = NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN;
|
|
|
|
if (adma_enable) {
|
|
new_reg = current_reg | config_mask;
|
|
pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE;
|
|
} else {
|
|
new_reg = current_reg & ~config_mask;
|
|
pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE;
|
|
}
|
|
|
|
if (current_reg != new_reg)
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg);
|
|
|
|
port0 = ap->host->ports[0]->private_data;
|
|
port1 = ap->host->ports[1]->private_data;
|
|
if ((port0->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
|
|
(port1->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) {
|
|
/*
|
|
* We have to set the DMA mask to 32-bit if either port is in
|
|
* ATAPI mode, since they are on the same PCI device which is
|
|
* used for DMA mapping. If either SCSI device is not allocated
|
|
* yet, it's OK since that port will discover its correct
|
|
* setting when it does get allocated.
|
|
*/
|
|
rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
|
|
} else {
|
|
rc = dma_set_mask(&pdev->dev, pp->adma_dma_mask);
|
|
}
|
|
|
|
blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
|
|
blk_queue_max_segments(sdev->request_queue, sg_tablesize);
|
|
ata_port_info(ap,
|
|
"DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
|
|
(unsigned long long)*ap->host->dev->dma_mask,
|
|
segment_boundary, sg_tablesize);
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
return !(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
|
|
}
|
|
|
|
static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
/* Other than when internal or pass-through commands are executed,
|
|
the only time this function will be called in ADMA mode will be
|
|
if a command fails. In the failure case we don't care about going
|
|
into register mode with ADMA commands pending, as the commands will
|
|
all shortly be aborted anyway. We assume that NCQ commands are not
|
|
issued via passthrough, which is the only way that switching into
|
|
ADMA mode could abort outstanding commands. */
|
|
nv_adma_register_mode(ap);
|
|
|
|
ata_sff_tf_read(ap, tf);
|
|
}
|
|
|
|
static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
|
|
{
|
|
unsigned int idx = 0;
|
|
|
|
if (tf->flags & ATA_TFLAG_ISADDR) {
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
|
|
} else
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature | WNB);
|
|
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
|
|
}
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE)
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device);
|
|
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND);
|
|
|
|
while (idx < 12)
|
|
cpb[idx++] = cpu_to_le16(IGN);
|
|
|
|
return idx;
|
|
}
|
|
|
|
static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
u8 flags = pp->cpb[cpb_num].resp_flags;
|
|
|
|
VPRINTK("CPB %d, flags=0x%x\n", cpb_num, flags);
|
|
|
|
if (unlikely((force_err ||
|
|
flags & (NV_CPB_RESP_ATA_ERR |
|
|
NV_CPB_RESP_CMD_ERR |
|
|
NV_CPB_RESP_CPB_ERR)))) {
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
int freeze = 0;
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
__ata_ehi_push_desc(ehi, "CPB resp_flags 0x%x: ", flags);
|
|
if (flags & NV_CPB_RESP_ATA_ERR) {
|
|
ata_ehi_push_desc(ehi, "ATA error");
|
|
ehi->err_mask |= AC_ERR_DEV;
|
|
} else if (flags & NV_CPB_RESP_CMD_ERR) {
|
|
ata_ehi_push_desc(ehi, "CMD error");
|
|
ehi->err_mask |= AC_ERR_DEV;
|
|
} else if (flags & NV_CPB_RESP_CPB_ERR) {
|
|
ata_ehi_push_desc(ehi, "CPB error");
|
|
ehi->err_mask |= AC_ERR_SYSTEM;
|
|
freeze = 1;
|
|
} else {
|
|
/* notifier error, but no error in CPB flags? */
|
|
ata_ehi_push_desc(ehi, "unknown");
|
|
ehi->err_mask |= AC_ERR_OTHER;
|
|
freeze = 1;
|
|
}
|
|
/* Kill all commands. EH will determine what actually failed. */
|
|
if (freeze)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
return -1;
|
|
}
|
|
|
|
if (likely(flags & NV_CPB_RESP_DONE))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
|
|
{
|
|
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
|
|
/* freeze if hotplugged */
|
|
if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) {
|
|
ata_port_freeze(ap);
|
|
return 1;
|
|
}
|
|
|
|
/* bail out if not our interrupt */
|
|
if (!(irq_stat & NV_INT_DEV))
|
|
return 0;
|
|
|
|
/* DEV interrupt w/ no active qc? */
|
|
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
ata_sff_check_status(ap);
|
|
return 1;
|
|
}
|
|
|
|
/* handle interrupt */
|
|
return ata_bmdma_port_intr(ap, qc);
|
|
}
|
|
|
|
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
int i, handled = 0;
|
|
u32 notifier_clears[2];
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 status;
|
|
u32 gen_ctl;
|
|
u32 notifier, notifier_error;
|
|
|
|
notifier_clears[i] = 0;
|
|
|
|
/* if ADMA is disabled, use standard ata interrupt handler */
|
|
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
|
|
u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
|
|
>> (NV_INT_PORT_SHIFT * i);
|
|
handled += nv_host_intr(ap, irq_stat);
|
|
continue;
|
|
}
|
|
|
|
/* if in ATA register mode, check for standard interrupts */
|
|
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
|
|
u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
|
|
>> (NV_INT_PORT_SHIFT * i);
|
|
if (ata_tag_valid(ap->link.active_tag))
|
|
/** NV_INT_DEV indication seems unreliable
|
|
at times at least in ADMA mode. Force it
|
|
on always when a command is active, to
|
|
prevent losing interrupts. */
|
|
irq_stat |= NV_INT_DEV;
|
|
handled += nv_host_intr(ap, irq_stat);
|
|
}
|
|
|
|
notifier = readl(mmio + NV_ADMA_NOTIFIER);
|
|
notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
|
|
notifier_clears[i] = notifier | notifier_error;
|
|
|
|
gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
|
|
|
|
if (!NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
|
|
!notifier_error)
|
|
/* Nothing to do */
|
|
continue;
|
|
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
|
|
/*
|
|
* Clear status. Ensure the controller sees the
|
|
* clearing before we start looking at any of the CPB
|
|
* statuses, so that any CPB completions after this
|
|
* point in the handler will raise another interrupt.
|
|
*/
|
|
writew(status, mmio + NV_ADMA_STAT);
|
|
readw(mmio + NV_ADMA_STAT); /* flush posted write */
|
|
rmb();
|
|
|
|
handled++; /* irq handled if we got here */
|
|
|
|
/* freeze if hotplugged or controller error */
|
|
if (unlikely(status & (NV_ADMA_STAT_HOTPLUG |
|
|
NV_ADMA_STAT_HOTUNPLUG |
|
|
NV_ADMA_STAT_TIMEOUT |
|
|
NV_ADMA_STAT_SERROR))) {
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
__ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status);
|
|
if (status & NV_ADMA_STAT_TIMEOUT) {
|
|
ehi->err_mask |= AC_ERR_SYSTEM;
|
|
ata_ehi_push_desc(ehi, "timeout");
|
|
} else if (status & NV_ADMA_STAT_HOTPLUG) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, "hotplug");
|
|
} else if (status & NV_ADMA_STAT_HOTUNPLUG) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, "hot unplug");
|
|
} else if (status & NV_ADMA_STAT_SERROR) {
|
|
/* let EH analyze SError and figure out cause */
|
|
ata_ehi_push_desc(ehi, "SError");
|
|
} else
|
|
ata_ehi_push_desc(ehi, "unknown");
|
|
ata_port_freeze(ap);
|
|
continue;
|
|
}
|
|
|
|
if (status & (NV_ADMA_STAT_DONE |
|
|
NV_ADMA_STAT_CPBERR |
|
|
NV_ADMA_STAT_CMD_COMPLETE)) {
|
|
u32 check_commands = notifier_clears[i];
|
|
u32 done_mask = 0;
|
|
int pos, rc;
|
|
|
|
if (status & NV_ADMA_STAT_CPBERR) {
|
|
/* check all active commands */
|
|
if (ata_tag_valid(ap->link.active_tag))
|
|
check_commands = 1 <<
|
|
ap->link.active_tag;
|
|
else
|
|
check_commands = ap->link.sactive;
|
|
}
|
|
|
|
/* check CPBs for completed commands */
|
|
while ((pos = ffs(check_commands))) {
|
|
pos--;
|
|
rc = nv_adma_check_cpb(ap, pos,
|
|
notifier_error & (1 << pos));
|
|
if (rc > 0)
|
|
done_mask |= 1 << pos;
|
|
else if (unlikely(rc < 0))
|
|
check_commands = 0;
|
|
check_commands &= ~(1 << pos);
|
|
}
|
|
ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);
|
|
}
|
|
}
|
|
|
|
if (notifier_clears[0] || notifier_clears[1]) {
|
|
/* Note: Both notifier clear registers must be written
|
|
if either is set, even if one is zero, according to NVIDIA. */
|
|
struct nv_adma_port_priv *pp = host->ports[0]->private_data;
|
|
writel(notifier_clears[0], pp->notifier_clear_block);
|
|
pp = host->ports[1]->private_data;
|
|
writel(notifier_clears[1], pp->notifier_clear_block);
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void nv_adma_freeze(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp;
|
|
|
|
nv_ck804_freeze(ap);
|
|
|
|
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
|
|
return;
|
|
|
|
/* clear any outstanding CK804 notifications */
|
|
writeb(NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT),
|
|
ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
|
|
|
|
/* Disable interrupt */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
|
|
mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
}
|
|
|
|
static void nv_adma_thaw(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp;
|
|
|
|
nv_ck804_thaw(ap);
|
|
|
|
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
|
|
return;
|
|
|
|
/* Enable interrupt */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
|
|
mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
}
|
|
|
|
static void nv_adma_irq_clear(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u32 notifier_clears[2];
|
|
|
|
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
|
|
ata_bmdma_irq_clear(ap);
|
|
return;
|
|
}
|
|
|
|
/* clear any outstanding CK804 notifications */
|
|
writeb(NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT),
|
|
ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
|
|
|
|
/* clear ADMA status */
|
|
writew(0xffff, mmio + NV_ADMA_STAT);
|
|
|
|
/* clear notifiers - note both ports need to be written with
|
|
something even though we are only clearing on one */
|
|
if (ap->port_no == 0) {
|
|
notifier_clears[0] = 0xFFFFFFFF;
|
|
notifier_clears[1] = 0;
|
|
} else {
|
|
notifier_clears[0] = 0;
|
|
notifier_clears[1] = 0xFFFFFFFF;
|
|
}
|
|
pp = ap->host->ports[0]->private_data;
|
|
writel(notifier_clears[0], pp->notifier_clear_block);
|
|
pp = ap->host->ports[1]->private_data;
|
|
writel(notifier_clears[1], pp->notifier_clear_block);
|
|
}
|
|
|
|
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
|
|
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
|
|
ata_bmdma_post_internal_cmd(qc);
|
|
}
|
|
|
|
static int nv_adma_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct nv_adma_port_priv *pp;
|
|
int rc;
|
|
void *mem;
|
|
dma_addr_t mem_dma;
|
|
void __iomem *mmio;
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
u16 tmp;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/*
|
|
* Ensure DMA mask is set to 32-bit before allocating legacy PRD and
|
|
* pad buffers.
|
|
*/
|
|
rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* we might fallback to bmdma, allocate bmdma resources */
|
|
rc = ata_bmdma_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
mmio = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_PORT +
|
|
ap->port_no * NV_ADMA_PORT_SIZE;
|
|
pp->ctl_block = mmio;
|
|
pp->gen_block = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_GEN;
|
|
pp->notifier_clear_block = pp->gen_block +
|
|
NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no);
|
|
|
|
/*
|
|
* Now that the legacy PRD and padding buffer are allocated we can
|
|
* raise the DMA mask to allocate the CPB/APRD table.
|
|
*/
|
|
dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
|
|
|
|
pp->adma_dma_mask = *dev->dma_mask;
|
|
|
|
mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
|
|
&mem_dma, GFP_KERNEL);
|
|
if (!mem)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* First item in chunk of DMA memory:
|
|
* 128-byte command parameter block (CPB)
|
|
* one for each command tag
|
|
*/
|
|
pp->cpb = mem;
|
|
pp->cpb_dma = mem_dma;
|
|
|
|
writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
|
|
writel((mem_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
|
|
|
|
mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
|
|
mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
|
|
|
|
/*
|
|
* Second item: block of ADMA_SGTBL_LEN s/g entries
|
|
*/
|
|
pp->aprd = mem;
|
|
pp->aprd_dma = mem_dma;
|
|
|
|
ap->private_data = pp;
|
|
|
|
/* clear any outstanding interrupt conditions */
|
|
writew(0xffff, mmio + NV_ADMA_STAT);
|
|
|
|
/* initialize port variables */
|
|
pp->flags = NV_ADMA_PORT_REGISTER_MODE;
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* clear GO for register mode, enable interrupt */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
|
|
NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
udelay(1);
|
|
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nv_adma_port_stop(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
|
|
VPRINTK("ENTER\n");
|
|
writew(0, mmio + NV_ADMA_CTL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
|
|
/* Go to register mode - clears GO */
|
|
nv_adma_register_mode(ap);
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* disable interrupt, shut down port */
|
|
writew(0, mmio + NV_ADMA_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nv_adma_port_resume(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp;
|
|
|
|
/* set CPB block location */
|
|
writel(pp->cpb_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
|
|
writel((pp->cpb_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
|
|
|
|
/* clear any outstanding interrupt conditions */
|
|
writew(0xffff, mmio + NV_ADMA_STAT);
|
|
|
|
/* initialize port variables */
|
|
pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* clear GO for register mode, enable interrupt */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
|
|
NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
udelay(1);
|
|
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void nv_adma_setup_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR];
|
|
struct ata_ioports *ioport = &ap->ioaddr;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
mmio += NV_ADMA_PORT + ap->port_no * NV_ADMA_PORT_SIZE;
|
|
|
|
ioport->cmd_addr = mmio;
|
|
ioport->data_addr = mmio + (ATA_REG_DATA * 4);
|
|
ioport->error_addr =
|
|
ioport->feature_addr = mmio + (ATA_REG_ERR * 4);
|
|
ioport->nsect_addr = mmio + (ATA_REG_NSECT * 4);
|
|
ioport->lbal_addr = mmio + (ATA_REG_LBAL * 4);
|
|
ioport->lbam_addr = mmio + (ATA_REG_LBAM * 4);
|
|
ioport->lbah_addr = mmio + (ATA_REG_LBAH * 4);
|
|
ioport->device_addr = mmio + (ATA_REG_DEVICE * 4);
|
|
ioport->status_addr =
|
|
ioport->command_addr = mmio + (ATA_REG_STATUS * 4);
|
|
ioport->altstatus_addr =
|
|
ioport->ctl_addr = mmio + 0x20;
|
|
}
|
|
|
|
static int nv_adma_host_init(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
unsigned int i;
|
|
u32 tmp32;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/* enable ADMA on the ports */
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
|
|
tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
|
|
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
|
|
|
|
for (i = 0; i < host->n_ports; i++)
|
|
nv_adma_setup_port(host->ports[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
|
|
struct scatterlist *sg,
|
|
int idx,
|
|
struct nv_adma_prd *aprd)
|
|
{
|
|
u8 flags = 0;
|
|
if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
flags |= NV_APRD_WRITE;
|
|
if (idx == qc->n_elem - 1)
|
|
flags |= NV_APRD_END;
|
|
else if (idx != 4)
|
|
flags |= NV_APRD_CONT;
|
|
|
|
aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg)));
|
|
aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
|
|
aprd->flags = flags;
|
|
aprd->packet_len = 0;
|
|
}
|
|
|
|
static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
struct nv_adma_prd *aprd;
|
|
struct scatterlist *sg;
|
|
unsigned int si;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
aprd = (si < 5) ? &cpb->aprd[si] :
|
|
&pp->aprd[NV_ADMA_SGTBL_LEN * qc->hw_tag + (si-5)];
|
|
nv_adma_fill_aprd(qc, sg, si, aprd);
|
|
}
|
|
if (si > 5)
|
|
cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->hw_tag)));
|
|
else
|
|
cpb->next_aprd = cpu_to_le64(0);
|
|
}
|
|
|
|
static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
|
|
/* ADMA engine can only be used for non-ATAPI DMA commands,
|
|
or interrupt-driven no-data commands. */
|
|
if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
|
|
(qc->tf.flags & ATA_TFLAG_POLLING))
|
|
return 1;
|
|
|
|
if ((qc->flags & ATA_QCFLAG_DMAMAP) ||
|
|
(qc->tf.protocol == ATA_PROT_NODATA))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
struct nv_adma_cpb *cpb = &pp->cpb[qc->hw_tag];
|
|
u8 ctl_flags = NV_CPB_CTL_CPB_VALID |
|
|
NV_CPB_CTL_IEN;
|
|
|
|
if (nv_adma_use_reg_mode(qc)) {
|
|
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
|
|
(qc->flags & ATA_QCFLAG_DMAMAP));
|
|
nv_adma_register_mode(qc->ap);
|
|
ata_bmdma_qc_prep(qc);
|
|
return AC_ERR_OK;
|
|
}
|
|
|
|
cpb->resp_flags = NV_CPB_RESP_DONE;
|
|
wmb();
|
|
cpb->ctl_flags = 0;
|
|
wmb();
|
|
|
|
cpb->len = 3;
|
|
cpb->tag = qc->hw_tag;
|
|
cpb->next_cpb_idx = 0;
|
|
|
|
/* turn on NCQ flags for NCQ commands */
|
|
if (qc->tf.protocol == ATA_PROT_NCQ)
|
|
ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA;
|
|
|
|
VPRINTK("qc->flags = 0x%lx\n", qc->flags);
|
|
|
|
nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
|
|
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP) {
|
|
nv_adma_fill_sg(qc, cpb);
|
|
ctl_flags |= NV_CPB_CTL_APRD_VALID;
|
|
} else
|
|
memset(&cpb->aprd[0], 0, sizeof(struct nv_adma_prd) * 5);
|
|
|
|
/* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID
|
|
until we are finished filling in all of the contents */
|
|
wmb();
|
|
cpb->ctl_flags = ctl_flags;
|
|
wmb();
|
|
cpb->resp_flags = 0;
|
|
|
|
return AC_ERR_OK;
|
|
}
|
|
|
|
static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ);
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/* We can't handle result taskfile with NCQ commands, since
|
|
retrieving the taskfile switches us out of ADMA mode and would abort
|
|
existing commands. */
|
|
if (unlikely(qc->tf.protocol == ATA_PROT_NCQ &&
|
|
(qc->flags & ATA_QCFLAG_RESULT_TF))) {
|
|
ata_dev_err(qc->dev, "NCQ w/ RESULT_TF not allowed\n");
|
|
return AC_ERR_SYSTEM;
|
|
}
|
|
|
|
if (nv_adma_use_reg_mode(qc)) {
|
|
/* use ATA register mode */
|
|
VPRINTK("using ATA register mode: 0x%lx\n", qc->flags);
|
|
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
|
|
(qc->flags & ATA_QCFLAG_DMAMAP));
|
|
nv_adma_register_mode(qc->ap);
|
|
return ata_bmdma_qc_issue(qc);
|
|
} else
|
|
nv_adma_mode(qc->ap);
|
|
|
|
/* write append register, command tag in lower 8 bits
|
|
and (number of cpbs to append -1) in top 8 bits */
|
|
wmb();
|
|
|
|
if (curr_ncq != pp->last_issue_ncq) {
|
|
/* Seems to need some delay before switching between NCQ and
|
|
non-NCQ commands, else we get command timeouts and such. */
|
|
udelay(20);
|
|
pp->last_issue_ncq = curr_ncq;
|
|
}
|
|
|
|
writew(qc->hw_tag, mmio + NV_ADMA_APPEND);
|
|
|
|
DPRINTK("Issued tag %u\n", qc->hw_tag);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
unsigned int i;
|
|
unsigned int handled = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
handled += ata_bmdma_port_intr(ap, qc);
|
|
} else {
|
|
/*
|
|
* No request pending? Clear interrupt status
|
|
* anyway, in case there's one pending.
|
|
*/
|
|
ap->ops->sff_check_status(ap);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat)
|
|
{
|
|
int i, handled = 0;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
handled += nv_host_intr(host->ports[i], irq_stat);
|
|
irq_stat >>= NV_INT_PORT_SHIFT;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
u8 irq_stat;
|
|
irqreturn_t ret;
|
|
|
|
spin_lock(&host->lock);
|
|
irq_stat = ioread8(host->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
|
|
ret = nv_do_interrupt(host, irq_stat);
|
|
spin_unlock(&host->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
u8 irq_stat;
|
|
irqreturn_t ret;
|
|
|
|
spin_lock(&host->lock);
|
|
irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
|
|
ret = nv_do_interrupt(host, irq_stat);
|
|
spin_unlock(&host->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
|
|
*val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
|
|
iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
static int nv_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_eh_context *ehc = &link->eh_context;
|
|
|
|
/* Do hardreset iff it's post-boot probing, please read the
|
|
* comment above port ops for details.
|
|
*/
|
|
if (!(link->ap->pflags & ATA_PFLAG_LOADING) &&
|
|
!ata_dev_enabled(link->device))
|
|
sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
|
|
NULL, NULL);
|
|
else {
|
|
const unsigned long *timing = sata_ehc_deb_timing(ehc);
|
|
int rc;
|
|
|
|
if (!(ehc->i.flags & ATA_EHI_QUIET))
|
|
ata_link_info(link,
|
|
"nv: skipping hardreset on occupied port\n");
|
|
|
|
/* make sure the link is online */
|
|
rc = sata_link_resume(link, timing, deadline);
|
|
/* whine about phy resume failure but proceed */
|
|
if (rc && rc != -EOPNOTSUPP)
|
|
ata_link_warn(link, "failed to resume link (errno=%d)\n",
|
|
rc);
|
|
}
|
|
|
|
/* device signature acquisition is unreliable */
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static void nv_nf2_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
mask = ioread8(scr_addr + NV_INT_ENABLE);
|
|
mask &= ~(NV_INT_ALL << shift);
|
|
iowrite8(mask, scr_addr + NV_INT_ENABLE);
|
|
}
|
|
|
|
static void nv_nf2_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
iowrite8(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS);
|
|
|
|
mask = ioread8(scr_addr + NV_INT_ENABLE);
|
|
mask |= (NV_INT_MASK << shift);
|
|
iowrite8(mask, scr_addr + NV_INT_ENABLE);
|
|
}
|
|
|
|
static void nv_ck804_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
mask = readb(mmio_base + NV_INT_ENABLE_CK804);
|
|
mask &= ~(NV_INT_ALL << shift);
|
|
writeb(mask, mmio_base + NV_INT_ENABLE_CK804);
|
|
}
|
|
|
|
static void nv_ck804_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804);
|
|
|
|
mask = readb(mmio_base + NV_INT_ENABLE_CK804);
|
|
mask |= (NV_INT_MASK << shift);
|
|
writeb(mask, mmio_base + NV_INT_ENABLE_CK804);
|
|
}
|
|
|
|
static void nv_mcp55_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT_MCP55;
|
|
u32 mask;
|
|
|
|
writel(NV_INT_ALL_MCP55 << shift, mmio_base + NV_INT_STATUS_MCP55);
|
|
|
|
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
|
|
mask &= ~(NV_INT_ALL_MCP55 << shift);
|
|
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
|
|
}
|
|
|
|
static void nv_mcp55_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT_MCP55;
|
|
u32 mask;
|
|
|
|
writel(NV_INT_ALL_MCP55 << shift, mmio_base + NV_INT_STATUS_MCP55);
|
|
|
|
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
|
|
mask |= (NV_INT_MASK_MCP55 << shift);
|
|
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
|
|
}
|
|
|
|
static void nv_adma_error_handler(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
|
|
void __iomem *mmio = pp->ctl_block;
|
|
int i;
|
|
u16 tmp;
|
|
|
|
if (ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
|
|
u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
|
|
u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
|
|
u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
|
|
u32 status = readw(mmio + NV_ADMA_STAT);
|
|
u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
|
|
u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
|
|
|
|
ata_port_err(ap,
|
|
"EH in ADMA mode, notifier 0x%X "
|
|
"notifier_error 0x%X gen_ctl 0x%X status 0x%X "
|
|
"next cpb count 0x%X next cpb idx 0x%x\n",
|
|
notifier, notifier_error, gen_ctl, status,
|
|
cpb_count, next_cpb_idx);
|
|
|
|
for (i = 0; i < NV_ADMA_MAX_CPBS; i++) {
|
|
struct nv_adma_cpb *cpb = &pp->cpb[i];
|
|
if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
|
|
ap->link.sactive & (1 << i))
|
|
ata_port_err(ap,
|
|
"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
|
|
i, cpb->ctl_flags, cpb->resp_flags);
|
|
}
|
|
}
|
|
|
|
/* Push us back into port register mode for error handling. */
|
|
nv_adma_register_mode(ap);
|
|
|
|
/* Mark all of the CPBs as invalid to prevent them from
|
|
being executed */
|
|
for (i = 0; i < NV_ADMA_MAX_CPBS; i++)
|
|
pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* Reset channel */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
udelay(1);
|
|
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw(mmio + NV_ADMA_CTL); /* flush posted write */
|
|
}
|
|
|
|
ata_bmdma_error_handler(ap);
|
|
}
|
|
|
|
static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
struct defer_queue *dq = &pp->defer_queue;
|
|
|
|
/* queue is full */
|
|
WARN_ON(dq->tail - dq->head == ATA_MAX_QUEUE);
|
|
dq->defer_bits |= (1 << qc->hw_tag);
|
|
dq->tag[dq->tail++ & (ATA_MAX_QUEUE - 1)] = qc->hw_tag;
|
|
}
|
|
|
|
static struct ata_queued_cmd *nv_swncq_qc_from_dq(struct ata_port *ap)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
struct defer_queue *dq = &pp->defer_queue;
|
|
unsigned int tag;
|
|
|
|
if (dq->head == dq->tail) /* null queue */
|
|
return NULL;
|
|
|
|
tag = dq->tag[dq->head & (ATA_MAX_QUEUE - 1)];
|
|
dq->tag[dq->head++ & (ATA_MAX_QUEUE - 1)] = ATA_TAG_POISON;
|
|
WARN_ON(!(dq->defer_bits & (1 << tag)));
|
|
dq->defer_bits &= ~(1 << tag);
|
|
|
|
return ata_qc_from_tag(ap, tag);
|
|
}
|
|
|
|
static void nv_swncq_fis_reinit(struct ata_port *ap)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
|
|
pp->dhfis_bits = 0;
|
|
pp->dmafis_bits = 0;
|
|
pp->sdbfis_bits = 0;
|
|
pp->ncq_flags = 0;
|
|
}
|
|
|
|
static void nv_swncq_pp_reinit(struct ata_port *ap)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
struct defer_queue *dq = &pp->defer_queue;
|
|
|
|
dq->head = 0;
|
|
dq->tail = 0;
|
|
dq->defer_bits = 0;
|
|
pp->qc_active = 0;
|
|
pp->last_issue_tag = ATA_TAG_POISON;
|
|
nv_swncq_fis_reinit(ap);
|
|
}
|
|
|
|
static void nv_swncq_irq_clear(struct ata_port *ap, u16 fis)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
|
|
writew(fis, pp->irq_block);
|
|
}
|
|
|
|
static void __ata_bmdma_stop(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd qc;
|
|
|
|
qc.ap = ap;
|
|
ata_bmdma_stop(&qc);
|
|
}
|
|
|
|
static void nv_swncq_ncq_stop(struct ata_port *ap)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
unsigned int i;
|
|
u32 sactive;
|
|
u32 done_mask;
|
|
|
|
ata_port_err(ap, "EH in SWNCQ mode,QC:qc_active 0x%llX sactive 0x%X\n",
|
|
ap->qc_active, ap->link.sactive);
|
|
ata_port_err(ap,
|
|
"SWNCQ:qc_active 0x%X defer_bits 0x%X last_issue_tag 0x%x\n "
|
|
"dhfis 0x%X dmafis 0x%X sdbfis 0x%X\n",
|
|
pp->qc_active, pp->defer_queue.defer_bits, pp->last_issue_tag,
|
|
pp->dhfis_bits, pp->dmafis_bits, pp->sdbfis_bits);
|
|
|
|
ata_port_err(ap, "ATA_REG 0x%X ERR_REG 0x%X\n",
|
|
ap->ops->sff_check_status(ap),
|
|
ioread8(ap->ioaddr.error_addr));
|
|
|
|
sactive = readl(pp->sactive_block);
|
|
done_mask = pp->qc_active ^ sactive;
|
|
|
|
ata_port_err(ap, "tag : dhfis dmafis sdbfis sactive\n");
|
|
for (i = 0; i < ATA_MAX_QUEUE; i++) {
|
|
u8 err = 0;
|
|
if (pp->qc_active & (1 << i))
|
|
err = 0;
|
|
else if (done_mask & (1 << i))
|
|
err = 1;
|
|
else
|
|
continue;
|
|
|
|
ata_port_err(ap,
|
|
"tag 0x%x: %01x %01x %01x %01x %s\n", i,
|
|
(pp->dhfis_bits >> i) & 0x1,
|
|
(pp->dmafis_bits >> i) & 0x1,
|
|
(pp->sdbfis_bits >> i) & 0x1,
|
|
(sactive >> i) & 0x1,
|
|
(err ? "error! tag doesn't exit" : " "));
|
|
}
|
|
|
|
nv_swncq_pp_reinit(ap);
|
|
ap->ops->sff_irq_clear(ap);
|
|
__ata_bmdma_stop(ap);
|
|
nv_swncq_irq_clear(ap, 0xffff);
|
|
}
|
|
|
|
static void nv_swncq_error_handler(struct ata_port *ap)
|
|
{
|
|
struct ata_eh_context *ehc = &ap->link.eh_context;
|
|
|
|
if (ap->link.sactive) {
|
|
nv_swncq_ncq_stop(ap);
|
|
ehc->i.action |= ATA_EH_RESET;
|
|
}
|
|
|
|
ata_bmdma_error_handler(ap);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int nv_swncq_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR];
|
|
u32 tmp;
|
|
|
|
/* clear irq */
|
|
writel(~0, mmio + NV_INT_STATUS_MCP55);
|
|
|
|
/* disable irq */
|
|
writel(0, mmio + NV_INT_ENABLE_MCP55);
|
|
|
|
/* disable swncq */
|
|
tmp = readl(mmio + NV_CTL_MCP55);
|
|
tmp &= ~(NV_CTL_PRI_SWNCQ | NV_CTL_SEC_SWNCQ);
|
|
writel(tmp, mmio + NV_CTL_MCP55);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nv_swncq_port_resume(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR];
|
|
u32 tmp;
|
|
|
|
/* clear irq */
|
|
writel(~0, mmio + NV_INT_STATUS_MCP55);
|
|
|
|
/* enable irq */
|
|
writel(0x00fd00fd, mmio + NV_INT_ENABLE_MCP55);
|
|
|
|
/* enable swncq */
|
|
tmp = readl(mmio + NV_CTL_MCP55);
|
|
writel(tmp | NV_CTL_PRI_SWNCQ | NV_CTL_SEC_SWNCQ, mmio + NV_CTL_MCP55);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void nv_swncq_host_init(struct ata_host *host)
|
|
{
|
|
u32 tmp;
|
|
void __iomem *mmio = host->iomap[NV_MMIO_BAR];
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
u8 regval;
|
|
|
|
/* disable ECO 398 */
|
|
pci_read_config_byte(pdev, 0x7f, ®val);
|
|
regval &= ~(1 << 7);
|
|
pci_write_config_byte(pdev, 0x7f, regval);
|
|
|
|
/* enable swncq */
|
|
tmp = readl(mmio + NV_CTL_MCP55);
|
|
VPRINTK("HOST_CTL:0x%X\n", tmp);
|
|
writel(tmp | NV_CTL_PRI_SWNCQ | NV_CTL_SEC_SWNCQ, mmio + NV_CTL_MCP55);
|
|
|
|
/* enable irq intr */
|
|
tmp = readl(mmio + NV_INT_ENABLE_MCP55);
|
|
VPRINTK("HOST_ENABLE:0x%X\n", tmp);
|
|
writel(tmp | 0x00fd00fd, mmio + NV_INT_ENABLE_MCP55);
|
|
|
|
/* clear port irq */
|
|
writel(~0x0, mmio + NV_INT_STATUS_MCP55);
|
|
}
|
|
|
|
static int nv_swncq_slave_config(struct scsi_device *sdev)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct ata_device *dev;
|
|
int rc;
|
|
u8 rev;
|
|
u8 check_maxtor = 0;
|
|
unsigned char model_num[ATA_ID_PROD_LEN + 1];
|
|
|
|
rc = ata_scsi_slave_config(sdev);
|
|
if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
|
|
/* Not a proper libata device, ignore */
|
|
return rc;
|
|
|
|
dev = &ap->link.device[sdev->id];
|
|
if (!(ap->flags & ATA_FLAG_NCQ) || dev->class == ATA_DEV_ATAPI)
|
|
return rc;
|
|
|
|
/* if MCP51 and Maxtor, then disable ncq */
|
|
if (pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA ||
|
|
pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2)
|
|
check_maxtor = 1;
|
|
|
|
/* if MCP55 and rev <= a2 and Maxtor, then disable ncq */
|
|
if (pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA ||
|
|
pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2) {
|
|
pci_read_config_byte(pdev, 0x8, &rev);
|
|
if (rev <= 0xa2)
|
|
check_maxtor = 1;
|
|
}
|
|
|
|
if (!check_maxtor)
|
|
return rc;
|
|
|
|
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
|
|
|
|
if (strncmp(model_num, "Maxtor", 6) == 0) {
|
|
ata_scsi_change_queue_depth(sdev, 1);
|
|
ata_dev_notice(dev, "Disabling SWNCQ mode (depth %x)\n",
|
|
sdev->queue_depth);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int nv_swncq_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR];
|
|
struct nv_swncq_port_priv *pp;
|
|
int rc;
|
|
|
|
/* we might fallback to bmdma, allocate bmdma resources */
|
|
rc = ata_bmdma_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
pp->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ * ATA_MAX_QUEUE,
|
|
&pp->prd_dma, GFP_KERNEL);
|
|
if (!pp->prd)
|
|
return -ENOMEM;
|
|
|
|
ap->private_data = pp;
|
|
pp->sactive_block = ap->ioaddr.scr_addr + 4 * SCR_ACTIVE;
|
|
pp->irq_block = mmio + NV_INT_STATUS_MCP55 + ap->port_no * 2;
|
|
pp->tag_block = mmio + NV_NCQ_REG_MCP55 + ap->port_no * 2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
if (qc->tf.protocol != ATA_PROT_NCQ) {
|
|
ata_bmdma_qc_prep(qc);
|
|
return AC_ERR_OK;
|
|
}
|
|
|
|
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
|
|
return AC_ERR_OK;
|
|
|
|
nv_swncq_fill_sg(qc);
|
|
|
|
return AC_ERR_OK;
|
|
}
|
|
|
|
static void nv_swncq_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct scatterlist *sg;
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
struct ata_bmdma_prd *prd;
|
|
unsigned int si, idx;
|
|
|
|
prd = pp->prd + ATA_MAX_PRD * qc->hw_tag;
|
|
|
|
idx = 0;
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
u32 addr, offset;
|
|
u32 sg_len, len;
|
|
|
|
addr = (u32)sg_dma_address(sg);
|
|
sg_len = sg_dma_len(sg);
|
|
|
|
while (sg_len) {
|
|
offset = addr & 0xffff;
|
|
len = sg_len;
|
|
if ((offset + sg_len) > 0x10000)
|
|
len = 0x10000 - offset;
|
|
|
|
prd[idx].addr = cpu_to_le32(addr);
|
|
prd[idx].flags_len = cpu_to_le32(len & 0xffff);
|
|
|
|
idx++;
|
|
sg_len -= len;
|
|
addr += len;
|
|
}
|
|
}
|
|
|
|
prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
|
|
}
|
|
|
|
static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap,
|
|
struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
|
|
if (qc == NULL)
|
|
return 0;
|
|
|
|
DPRINTK("Enter\n");
|
|
|
|
writel((1 << qc->hw_tag), pp->sactive_block);
|
|
pp->last_issue_tag = qc->hw_tag;
|
|
pp->dhfis_bits &= ~(1 << qc->hw_tag);
|
|
pp->dmafis_bits &= ~(1 << qc->hw_tag);
|
|
pp->qc_active |= (0x1 << qc->hw_tag);
|
|
|
|
ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
|
|
DPRINTK("Issued tag %u\n", qc->hw_tag);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
|
|
if (qc->tf.protocol != ATA_PROT_NCQ)
|
|
return ata_bmdma_qc_issue(qc);
|
|
|
|
DPRINTK("Enter\n");
|
|
|
|
if (!pp->qc_active)
|
|
nv_swncq_issue_atacmd(ap, qc);
|
|
else
|
|
nv_swncq_qc_to_dq(ap, qc); /* add qc to defer queue */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nv_swncq_hotplug(struct ata_port *ap, u32 fis)
|
|
{
|
|
u32 serror;
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
|
|
/* AHCI needs SError cleared; otherwise, it might lock up */
|
|
sata_scr_read(&ap->link, SCR_ERROR, &serror);
|
|
sata_scr_write(&ap->link, SCR_ERROR, serror);
|
|
|
|
/* analyze @irq_stat */
|
|
if (fis & NV_SWNCQ_IRQ_ADDED)
|
|
ata_ehi_push_desc(ehi, "hot plug");
|
|
else if (fis & NV_SWNCQ_IRQ_REMOVED)
|
|
ata_ehi_push_desc(ehi, "hot unplug");
|
|
|
|
ata_ehi_hotplugged(ehi);
|
|
|
|
/* okay, let's hand over to EH */
|
|
ehi->serror |= serror;
|
|
|
|
ata_port_freeze(ap);
|
|
}
|
|
|
|
static int nv_swncq_sdbfis(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
u32 sactive;
|
|
u32 done_mask;
|
|
u8 host_stat;
|
|
u8 lack_dhfis = 0;
|
|
|
|
host_stat = ap->ops->bmdma_status(ap);
|
|
if (unlikely(host_stat & ATA_DMA_ERR)) {
|
|
/* error when transferring data to/from memory */
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
|
|
ehi->err_mask |= AC_ERR_HOST_BUS;
|
|
ehi->action |= ATA_EH_RESET;
|
|
return -EINVAL;
|
|
}
|
|
|
|
ap->ops->sff_irq_clear(ap);
|
|
__ata_bmdma_stop(ap);
|
|
|
|
sactive = readl(pp->sactive_block);
|
|
done_mask = pp->qc_active ^ sactive;
|
|
|
|
pp->qc_active &= ~done_mask;
|
|
pp->dhfis_bits &= ~done_mask;
|
|
pp->dmafis_bits &= ~done_mask;
|
|
pp->sdbfis_bits |= done_mask;
|
|
ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
|
|
|
|
if (!ap->qc_active) {
|
|
DPRINTK("over\n");
|
|
nv_swncq_pp_reinit(ap);
|
|
return 0;
|
|
}
|
|
|
|
if (pp->qc_active & pp->dhfis_bits)
|
|
return 0;
|
|
|
|
if ((pp->ncq_flags & ncq_saw_backout) ||
|
|
(pp->qc_active ^ pp->dhfis_bits))
|
|
/* if the controller can't get a device to host register FIS,
|
|
* The driver needs to reissue the new command.
|
|
*/
|
|
lack_dhfis = 1;
|
|
|
|
DPRINTK("id 0x%x QC: qc_active 0x%x,"
|
|
"SWNCQ:qc_active 0x%X defer_bits %X "
|
|
"dhfis 0x%X dmafis 0x%X last_issue_tag %x\n",
|
|
ap->print_id, ap->qc_active, pp->qc_active,
|
|
pp->defer_queue.defer_bits, pp->dhfis_bits,
|
|
pp->dmafis_bits, pp->last_issue_tag);
|
|
|
|
nv_swncq_fis_reinit(ap);
|
|
|
|
if (lack_dhfis) {
|
|
qc = ata_qc_from_tag(ap, pp->last_issue_tag);
|
|
nv_swncq_issue_atacmd(ap, qc);
|
|
return 0;
|
|
}
|
|
|
|
if (pp->defer_queue.defer_bits) {
|
|
/* send deferral queue command */
|
|
qc = nv_swncq_qc_from_dq(ap);
|
|
WARN_ON(qc == NULL);
|
|
nv_swncq_issue_atacmd(ap, qc);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 nv_swncq_tag(struct ata_port *ap)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
u32 tag;
|
|
|
|
tag = readb(pp->tag_block) >> 2;
|
|
return (tag & 0x1f);
|
|
}
|
|
|
|
static void nv_swncq_dmafis(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
unsigned int rw;
|
|
u8 dmactl;
|
|
u32 tag;
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
|
|
__ata_bmdma_stop(ap);
|
|
tag = nv_swncq_tag(ap);
|
|
|
|
DPRINTK("dma setup tag 0x%x\n", tag);
|
|
qc = ata_qc_from_tag(ap, tag);
|
|
|
|
if (unlikely(!qc))
|
|
return;
|
|
|
|
rw = qc->tf.flags & ATA_TFLAG_WRITE;
|
|
|
|
/* load PRD table addr. */
|
|
iowrite32(pp->prd_dma + ATA_PRD_TBL_SZ * qc->hw_tag,
|
|
ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
|
|
|
|
/* specify data direction, triple-check start bit is clear */
|
|
dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
|
|
dmactl &= ~ATA_DMA_WR;
|
|
if (!rw)
|
|
dmactl |= ATA_DMA_WR;
|
|
|
|
iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
|
|
}
|
|
|
|
static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
|
|
{
|
|
struct nv_swncq_port_priv *pp = ap->private_data;
|
|
struct ata_queued_cmd *qc;
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
u32 serror;
|
|
u8 ata_stat;
|
|
|
|
ata_stat = ap->ops->sff_check_status(ap);
|
|
nv_swncq_irq_clear(ap, fis);
|
|
if (!fis)
|
|
return;
|
|
|
|
if (ap->pflags & ATA_PFLAG_FROZEN)
|
|
return;
|
|
|
|
if (fis & NV_SWNCQ_IRQ_HOTPLUG) {
|
|
nv_swncq_hotplug(ap, fis);
|
|
return;
|
|
}
|
|
|
|
if (!pp->qc_active)
|
|
return;
|
|
|
|
if (ap->ops->scr_read(&ap->link, SCR_ERROR, &serror))
|
|
return;
|
|
ap->ops->scr_write(&ap->link, SCR_ERROR, serror);
|
|
|
|
if (ata_stat & ATA_ERR) {
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "Ata error. fis:0x%X", fis);
|
|
ehi->err_mask |= AC_ERR_DEV;
|
|
ehi->serror |= serror;
|
|
ehi->action |= ATA_EH_RESET;
|
|
ata_port_freeze(ap);
|
|
return;
|
|
}
|
|
|
|
if (fis & NV_SWNCQ_IRQ_BACKOUT) {
|
|
/* If the IRQ is backout, driver must issue
|
|
* the new command again some time later.
|
|
*/
|
|
pp->ncq_flags |= ncq_saw_backout;
|
|
}
|
|
|
|
if (fis & NV_SWNCQ_IRQ_SDBFIS) {
|
|
pp->ncq_flags |= ncq_saw_sdb;
|
|
DPRINTK("id 0x%x SWNCQ: qc_active 0x%X "
|
|
"dhfis 0x%X dmafis 0x%X sactive 0x%X\n",
|
|
ap->print_id, pp->qc_active, pp->dhfis_bits,
|
|
pp->dmafis_bits, readl(pp->sactive_block));
|
|
if (nv_swncq_sdbfis(ap) < 0)
|
|
goto irq_error;
|
|
}
|
|
|
|
if (fis & NV_SWNCQ_IRQ_DHREGFIS) {
|
|
/* The interrupt indicates the new command
|
|
* was transmitted correctly to the drive.
|
|
*/
|
|
pp->dhfis_bits |= (0x1 << pp->last_issue_tag);
|
|
pp->ncq_flags |= ncq_saw_d2h;
|
|
if (pp->ncq_flags & (ncq_saw_sdb | ncq_saw_backout)) {
|
|
ata_ehi_push_desc(ehi, "illegal fis transaction");
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_RESET;
|
|
goto irq_error;
|
|
}
|
|
|
|
if (!(fis & NV_SWNCQ_IRQ_DMASETUP) &&
|
|
!(pp->ncq_flags & ncq_saw_dmas)) {
|
|
ata_stat = ap->ops->sff_check_status(ap);
|
|
if (ata_stat & ATA_BUSY)
|
|
goto irq_exit;
|
|
|
|
if (pp->defer_queue.defer_bits) {
|
|
DPRINTK("send next command\n");
|
|
qc = nv_swncq_qc_from_dq(ap);
|
|
nv_swncq_issue_atacmd(ap, qc);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (fis & NV_SWNCQ_IRQ_DMASETUP) {
|
|
/* program the dma controller with appropriate PRD buffers
|
|
* and start the DMA transfer for requested command.
|
|
*/
|
|
pp->dmafis_bits |= (0x1 << nv_swncq_tag(ap));
|
|
pp->ncq_flags |= ncq_saw_dmas;
|
|
nv_swncq_dmafis(ap);
|
|
}
|
|
|
|
irq_exit:
|
|
return;
|
|
irq_error:
|
|
ata_ehi_push_desc(ehi, "fis:0x%x", fis);
|
|
ata_port_freeze(ap);
|
|
return;
|
|
}
|
|
|
|
static irqreturn_t nv_swncq_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
unsigned int i;
|
|
unsigned int handled = 0;
|
|
unsigned long flags;
|
|
u32 irq_stat;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
irq_stat = readl(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_MCP55);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (ap->link.sactive) {
|
|
nv_swncq_host_interrupt(ap, (u16)irq_stat);
|
|
handled = 1;
|
|
} else {
|
|
if (irq_stat) /* reserve Hotplug */
|
|
nv_swncq_irq_clear(ap, 0xfff0);
|
|
|
|
handled += nv_host_intr(ap, (u8)irq_stat);
|
|
}
|
|
irq_stat >>= NV_INT_PORT_SHIFT_MCP55;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
const struct ata_port_info *ppi[] = { NULL, NULL };
|
|
struct nv_pi_priv *ipriv;
|
|
struct ata_host *host;
|
|
struct nv_host_priv *hpriv;
|
|
int rc;
|
|
u32 bar;
|
|
void __iomem *base;
|
|
unsigned long type = ent->driver_data;
|
|
|
|
// Make sure this is a SATA controller by counting the number of bars
|
|
// (NVIDIA SATA controllers will always have six bars). Otherwise,
|
|
// it's an IDE controller and we ignore it.
|
|
for (bar = 0; bar < PCI_STD_NUM_BARS; bar++)
|
|
if (pci_resource_start(pdev, bar) == 0)
|
|
return -ENODEV;
|
|
|
|
ata_print_version_once(&pdev->dev, DRV_VERSION);
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* determine type and allocate host */
|
|
if (type == CK804 && adma_enabled) {
|
|
dev_notice(&pdev->dev, "Using ADMA mode\n");
|
|
type = ADMA;
|
|
} else if (type == MCP5x && swncq_enabled) {
|
|
dev_notice(&pdev->dev, "Using SWNCQ mode\n");
|
|
type = SWNCQ;
|
|
}
|
|
|
|
ppi[0] = &nv_port_info[type];
|
|
ipriv = ppi[0]->private_data;
|
|
rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
return -ENOMEM;
|
|
hpriv->type = type;
|
|
host->private_data = hpriv;
|
|
|
|
/* request and iomap NV_MMIO_BAR */
|
|
rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* configure SCR access */
|
|
base = host->iomap[NV_MMIO_BAR];
|
|
host->ports[0]->ioaddr.scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
|
|
host->ports[1]->ioaddr.scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
|
|
|
|
/* enable SATA space for CK804 */
|
|
if (type >= CK804) {
|
|
u8 regval;
|
|
|
|
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
|
|
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
|
|
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
|
|
}
|
|
|
|
/* init ADMA */
|
|
if (type == ADMA) {
|
|
rc = nv_adma_host_init(host);
|
|
if (rc)
|
|
return rc;
|
|
} else if (type == SWNCQ)
|
|
nv_swncq_host_init(host);
|
|
|
|
if (msi_enabled) {
|
|
dev_notice(&pdev->dev, "Using MSI\n");
|
|
pci_enable_msi(pdev);
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
return ata_pci_sff_activate_host(host, ipriv->irq_handler, ipriv->sht);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int nv_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
struct nv_host_priv *hpriv = host->private_data;
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
|
|
if (hpriv->type >= CK804) {
|
|
u8 regval;
|
|
|
|
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
|
|
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
|
|
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
|
|
}
|
|
if (hpriv->type == ADMA) {
|
|
u32 tmp32;
|
|
struct nv_adma_port_priv *pp;
|
|
/* enable/disable ADMA on the ports appropriately */
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
|
|
|
|
pp = host->ports[0]->private_data;
|
|
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
|
|
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
|
|
else
|
|
tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
|
|
pp = host->ports[1]->private_data;
|
|
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
|
|
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
|
|
else
|
|
tmp32 |= (NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
|
|
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
|
|
}
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void nv_ck804_host_stop(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
u8 regval;
|
|
|
|
/* disable SATA space for CK804 */
|
|
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
|
|
regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
|
|
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
|
|
}
|
|
|
|
static void nv_adma_host_stop(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
u32 tmp32;
|
|
|
|
/* disable ADMA on the ports */
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
|
|
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
|
|
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
|
|
|
|
nv_ck804_host_stop(host);
|
|
}
|
|
|
|
module_pci_driver(nv_pci_driver);
|
|
|
|
module_param_named(adma, adma_enabled, bool, 0444);
|
|
MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
|
|
module_param_named(swncq, swncq_enabled, bool, 0444);
|
|
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
|
|
module_param_named(msi, msi_enabled, bool, 0444);
|
|
MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
|