mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 03:45:20 +07:00
c65be1a63f
When evaluating a SCSI command's result using the field access macros, check for equality of the fields and not if a specific bit is set. This is a preparation patch, for reworking the results field in the SCSI command. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
4897 lines
141 KiB
C
4897 lines
141 KiB
C
/*
|
|
* dc395x.c
|
|
*
|
|
* Device Driver for Tekram DC395(U/UW/F), DC315(U)
|
|
* PCI SCSI Bus Master Host Adapter
|
|
* (SCSI chip set used Tekram ASIC TRM-S1040)
|
|
*
|
|
* Authors:
|
|
* C.L. Huang <ching@tekram.com.tw>
|
|
* Erich Chen <erich@tekram.com.tw>
|
|
* (C) Copyright 1995-1999 Tekram Technology Co., Ltd.
|
|
*
|
|
* Kurt Garloff <garloff@suse.de>
|
|
* (C) 1999-2000 Kurt Garloff
|
|
*
|
|
* Oliver Neukum <oliver@neukum.name>
|
|
* Ali Akcaagac <aliakc@web.de>
|
|
* Jamie Lenehan <lenehan@twibble.org>
|
|
* (C) 2003
|
|
*
|
|
* License: GNU GPL
|
|
*
|
|
*************************************************************************
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/list.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsicam.h> /* needed for scsicam_bios_param */
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include "dc395x.h"
|
|
|
|
#define DC395X_NAME "dc395x"
|
|
#define DC395X_BANNER "Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040"
|
|
#define DC395X_VERSION "v2.05, 2004/03/08"
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Features
|
|
---------------------------------------------------------------------------*/
|
|
/*
|
|
* Set to disable parts of the driver
|
|
*/
|
|
/*#define DC395x_NO_DISCONNECT*/
|
|
/*#define DC395x_NO_TAGQ*/
|
|
/*#define DC395x_NO_SYNC*/
|
|
/*#define DC395x_NO_WIDE*/
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Debugging
|
|
---------------------------------------------------------------------------*/
|
|
/*
|
|
* Types of debugging that can be enabled and disabled
|
|
*/
|
|
#define DBG_KG 0x0001
|
|
#define DBG_0 0x0002
|
|
#define DBG_1 0x0004
|
|
#define DBG_SG 0x0020
|
|
#define DBG_FIFO 0x0040
|
|
#define DBG_PIO 0x0080
|
|
|
|
|
|
/*
|
|
* Set set of things to output debugging for.
|
|
* Undefine to remove all debugging
|
|
*/
|
|
/*#define DEBUG_MASK (DBG_0|DBG_1|DBG_SG|DBG_FIFO|DBG_PIO)*/
|
|
/*#define DEBUG_MASK DBG_0*/
|
|
|
|
|
|
/*
|
|
* Output a kernel mesage at the specified level and append the
|
|
* driver name and a ": " to the start of the message
|
|
*/
|
|
#define dprintkl(level, format, arg...) \
|
|
printk(level DC395X_NAME ": " format , ## arg)
|
|
|
|
|
|
#ifdef DEBUG_MASK
|
|
/*
|
|
* print a debug message - this is formated with KERN_DEBUG, then the
|
|
* driver name followed by a ": " and then the message is output.
|
|
* This also checks that the specified debug level is enabled before
|
|
* outputing the message
|
|
*/
|
|
#define dprintkdbg(type, format, arg...) \
|
|
do { \
|
|
if ((type) & (DEBUG_MASK)) \
|
|
dprintkl(KERN_DEBUG , format , ## arg); \
|
|
} while (0)
|
|
|
|
/*
|
|
* Check if the specified type of debugging is enabled
|
|
*/
|
|
#define debug_enabled(type) ((DEBUG_MASK) & (type))
|
|
|
|
#else
|
|
/*
|
|
* No debugging. Do nothing
|
|
*/
|
|
#define dprintkdbg(type, format, arg...) \
|
|
do {} while (0)
|
|
#define debug_enabled(type) (0)
|
|
|
|
#endif
|
|
|
|
|
|
#ifndef PCI_VENDOR_ID_TEKRAM
|
|
#define PCI_VENDOR_ID_TEKRAM 0x1DE1 /* Vendor ID */
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_TEKRAM_TRMS1040
|
|
#define PCI_DEVICE_ID_TEKRAM_TRMS1040 0x0391 /* Device ID */
|
|
#endif
|
|
|
|
|
|
#define DC395x_LOCK_IO(dev,flags) spin_lock_irqsave(((struct Scsi_Host *)dev)->host_lock, flags)
|
|
#define DC395x_UNLOCK_IO(dev,flags) spin_unlock_irqrestore(((struct Scsi_Host *)dev)->host_lock, flags)
|
|
|
|
#define DC395x_read8(acb,address) (u8)(inb(acb->io_port_base + (address)))
|
|
#define DC395x_read16(acb,address) (u16)(inw(acb->io_port_base + (address)))
|
|
#define DC395x_read32(acb,address) (u32)(inl(acb->io_port_base + (address)))
|
|
#define DC395x_write8(acb,address,value) outb((value), acb->io_port_base + (address))
|
|
#define DC395x_write16(acb,address,value) outw((value), acb->io_port_base + (address))
|
|
#define DC395x_write32(acb,address,value) outl((value), acb->io_port_base + (address))
|
|
|
|
/* cmd->result */
|
|
#define RES_TARGET 0x000000FF /* Target State */
|
|
#define RES_TARGET_LNX STATUS_MASK /* Only official ... */
|
|
#define RES_ENDMSG 0x0000FF00 /* End Message */
|
|
#define RES_DID 0x00FF0000 /* DID_ codes */
|
|
#define RES_DRV 0xFF000000 /* DRIVER_ codes */
|
|
|
|
#define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
|
|
#define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt)<<1)
|
|
|
|
#define SET_RES_TARGET(who,tgt) { who &= ~RES_TARGET; who |= (int)(tgt); }
|
|
#define SET_RES_TARGET_LNX(who,tgt) { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; }
|
|
#define SET_RES_MSG(who,msg) { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; }
|
|
#define SET_RES_DID(who,did) { who &= ~RES_DID; who |= (int)(did) << 16; }
|
|
#define SET_RES_DRV(who,drv) { who &= ~RES_DRV; who |= (int)(drv) << 24; }
|
|
|
|
#define TAG_NONE 255
|
|
|
|
/*
|
|
* srb->segement_x is the hw sg list. It is always allocated as a
|
|
* DC395x_MAX_SG_LISTENTRY entries in a linear block which does not
|
|
* cross a page boundy.
|
|
*/
|
|
#define SEGMENTX_LEN (sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY)
|
|
|
|
|
|
struct SGentry {
|
|
u32 address; /* bus! address */
|
|
u32 length;
|
|
};
|
|
|
|
/* The SEEPROM structure for TRM_S1040 */
|
|
struct NVRamTarget {
|
|
u8 cfg0; /* Target configuration byte 0 */
|
|
u8 period; /* Target period */
|
|
u8 cfg2; /* Target configuration byte 2 */
|
|
u8 cfg3; /* Target configuration byte 3 */
|
|
};
|
|
|
|
struct NvRamType {
|
|
u8 sub_vendor_id[2]; /* 0,1 Sub Vendor ID */
|
|
u8 sub_sys_id[2]; /* 2,3 Sub System ID */
|
|
u8 sub_class; /* 4 Sub Class */
|
|
u8 vendor_id[2]; /* 5,6 Vendor ID */
|
|
u8 device_id[2]; /* 7,8 Device ID */
|
|
u8 reserved; /* 9 Reserved */
|
|
struct NVRamTarget target[DC395x_MAX_SCSI_ID];
|
|
/** 10,11,12,13
|
|
** 14,15,16,17
|
|
** ....
|
|
** ....
|
|
** 70,71,72,73
|
|
*/
|
|
u8 scsi_id; /* 74 Host Adapter SCSI ID */
|
|
u8 channel_cfg; /* 75 Channel configuration */
|
|
u8 delay_time; /* 76 Power on delay time */
|
|
u8 max_tag; /* 77 Maximum tags */
|
|
u8 reserved0; /* 78 */
|
|
u8 boot_target; /* 79 */
|
|
u8 boot_lun; /* 80 */
|
|
u8 reserved1; /* 81 */
|
|
u16 reserved2[22]; /* 82,..125 */
|
|
u16 cksum; /* 126,127 */
|
|
};
|
|
|
|
struct ScsiReqBlk {
|
|
struct list_head list; /* next/prev ptrs for srb lists */
|
|
struct DeviceCtlBlk *dcb;
|
|
struct scsi_cmnd *cmd;
|
|
|
|
struct SGentry *segment_x; /* Linear array of hw sg entries (up to 64 entries) */
|
|
dma_addr_t sg_bus_addr; /* Bus address of sg list (ie, of segment_x) */
|
|
|
|
u8 sg_count; /* No of HW sg entries for this request */
|
|
u8 sg_index; /* Index of HW sg entry for this request */
|
|
size_t total_xfer_length; /* Total number of bytes remaining to be transferred */
|
|
size_t request_length; /* Total number of bytes in this request */
|
|
/*
|
|
* The sense buffer handling function, request_sense, uses
|
|
* the first hw sg entry (segment_x[0]) and the transfer
|
|
* length (total_xfer_length). While doing this it stores the
|
|
* original values into the last sg hw list
|
|
* (srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1] and the
|
|
* total_xfer_length in xferred. These values are restored in
|
|
* pci_unmap_srb_sense. This is the only place xferred is used.
|
|
*/
|
|
size_t xferred; /* Saved copy of total_xfer_length */
|
|
|
|
u16 state;
|
|
|
|
u8 msgin_buf[6];
|
|
u8 msgout_buf[6];
|
|
|
|
u8 adapter_status;
|
|
u8 target_status;
|
|
u8 msg_count;
|
|
u8 end_message;
|
|
|
|
u8 tag_number;
|
|
u8 status;
|
|
u8 retry_count;
|
|
u8 flag;
|
|
|
|
u8 scsi_phase;
|
|
};
|
|
|
|
struct DeviceCtlBlk {
|
|
struct list_head list; /* next/prev ptrs for the dcb list */
|
|
struct AdapterCtlBlk *acb;
|
|
struct list_head srb_going_list; /* head of going srb list */
|
|
struct list_head srb_waiting_list; /* head of waiting srb list */
|
|
|
|
struct ScsiReqBlk *active_srb;
|
|
u32 tag_mask;
|
|
|
|
u16 max_command;
|
|
|
|
u8 target_id; /* SCSI Target ID (SCSI Only) */
|
|
u8 target_lun; /* SCSI Log. Unit (SCSI Only) */
|
|
u8 identify_msg;
|
|
u8 dev_mode;
|
|
|
|
u8 inquiry7; /* To store Inquiry flags */
|
|
u8 sync_mode; /* 0:async mode */
|
|
u8 min_nego_period; /* for nego. */
|
|
u8 sync_period; /* for reg. */
|
|
|
|
u8 sync_offset; /* for reg. and nego.(low nibble) */
|
|
u8 flag;
|
|
u8 dev_type;
|
|
u8 init_tcq_flag;
|
|
};
|
|
|
|
struct AdapterCtlBlk {
|
|
struct Scsi_Host *scsi_host;
|
|
|
|
unsigned long io_port_base;
|
|
unsigned long io_port_len;
|
|
|
|
struct list_head dcb_list; /* head of going dcb list */
|
|
struct DeviceCtlBlk *dcb_run_robin;
|
|
struct DeviceCtlBlk *active_dcb;
|
|
|
|
struct list_head srb_free_list; /* head of free srb list */
|
|
struct ScsiReqBlk *tmp_srb;
|
|
struct timer_list waiting_timer;
|
|
struct timer_list selto_timer;
|
|
|
|
unsigned long last_reset;
|
|
|
|
u16 srb_count;
|
|
|
|
u8 sel_timeout;
|
|
|
|
unsigned int irq_level;
|
|
u8 tag_max_num;
|
|
u8 acb_flag;
|
|
u8 gmode2;
|
|
|
|
u8 config;
|
|
u8 lun_chk;
|
|
u8 scan_devices;
|
|
u8 hostid_bit;
|
|
|
|
u8 dcb_map[DC395x_MAX_SCSI_ID];
|
|
struct DeviceCtlBlk *children[DC395x_MAX_SCSI_ID][32];
|
|
|
|
struct pci_dev *dev;
|
|
|
|
u8 msg_len;
|
|
|
|
struct ScsiReqBlk srb_array[DC395x_MAX_SRB_CNT];
|
|
struct ScsiReqBlk srb;
|
|
|
|
struct NvRamType eeprom; /* eeprom settings for this adapter */
|
|
};
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Forward declarations
|
|
---------------------------------------------------------------------------*/
|
|
static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status);
|
|
static void set_basic_config(struct AdapterCtlBlk *acb);
|
|
static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb);
|
|
static void reset_scsi_bus(struct AdapterCtlBlk *acb);
|
|
static void data_io_transfer(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb, u16 io_dir);
|
|
static void disconnect(struct AdapterCtlBlk *acb);
|
|
static void reselect(struct AdapterCtlBlk *acb);
|
|
static u8 start_scsi(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb);
|
|
static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb);
|
|
static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb);
|
|
static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_code,
|
|
struct scsi_cmnd *cmd, u8 force);
|
|
static void scsi_reset_detect(struct AdapterCtlBlk *acb);
|
|
static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb);
|
|
static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb);
|
|
static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb);
|
|
static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb);
|
|
static void set_xfer_rate(struct AdapterCtlBlk *acb,
|
|
struct DeviceCtlBlk *dcb);
|
|
static void waiting_timeout(struct timer_list *t);
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Static Data
|
|
---------------------------------------------------------------------------*/
|
|
static u16 current_sync_offset = 0;
|
|
|
|
static void *dc395x_scsi_phase0[] = {
|
|
data_out_phase0,/* phase:0 */
|
|
data_in_phase0, /* phase:1 */
|
|
command_phase0, /* phase:2 */
|
|
status_phase0, /* phase:3 */
|
|
nop0, /* phase:4 PH_BUS_FREE .. initial phase */
|
|
nop0, /* phase:5 PH_BUS_FREE .. initial phase */
|
|
msgout_phase0, /* phase:6 */
|
|
msgin_phase0, /* phase:7 */
|
|
};
|
|
|
|
static void *dc395x_scsi_phase1[] = {
|
|
data_out_phase1,/* phase:0 */
|
|
data_in_phase1, /* phase:1 */
|
|
command_phase1, /* phase:2 */
|
|
status_phase1, /* phase:3 */
|
|
nop1, /* phase:4 PH_BUS_FREE .. initial phase */
|
|
nop1, /* phase:5 PH_BUS_FREE .. initial phase */
|
|
msgout_phase1, /* phase:6 */
|
|
msgin_phase1, /* phase:7 */
|
|
};
|
|
|
|
/*
|
|
*Fast20: 000 50ns, 20.0 MHz
|
|
* 001 75ns, 13.3 MHz
|
|
* 010 100ns, 10.0 MHz
|
|
* 011 125ns, 8.0 MHz
|
|
* 100 150ns, 6.6 MHz
|
|
* 101 175ns, 5.7 MHz
|
|
* 110 200ns, 5.0 MHz
|
|
* 111 250ns, 4.0 MHz
|
|
*
|
|
*Fast40(LVDS): 000 25ns, 40.0 MHz
|
|
* 001 50ns, 20.0 MHz
|
|
* 010 75ns, 13.3 MHz
|
|
* 011 100ns, 10.0 MHz
|
|
* 100 125ns, 8.0 MHz
|
|
* 101 150ns, 6.6 MHz
|
|
* 110 175ns, 5.7 MHz
|
|
* 111 200ns, 5.0 MHz
|
|
*/
|
|
/*static u8 clock_period[] = {12,19,25,31,37,44,50,62};*/
|
|
|
|
/* real period:48ns,76ns,100ns,124ns,148ns,176ns,200ns,248ns */
|
|
static u8 clock_period[] = { 12, 18, 25, 31, 37, 43, 50, 62 };
|
|
static u16 clock_speed[] = { 200, 133, 100, 80, 67, 58, 50, 40 };
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Configuration
|
|
---------------------------------------------------------------------------*/
|
|
/*
|
|
* Module/boot parameters currently effect *all* instances of the
|
|
* card in the system.
|
|
*/
|
|
|
|
/*
|
|
* Command line parameters are stored in a structure below.
|
|
* These are the index's into the structure for the various
|
|
* command line options.
|
|
*/
|
|
#define CFG_ADAPTER_ID 0
|
|
#define CFG_MAX_SPEED 1
|
|
#define CFG_DEV_MODE 2
|
|
#define CFG_ADAPTER_MODE 3
|
|
#define CFG_TAGS 4
|
|
#define CFG_RESET_DELAY 5
|
|
|
|
#define CFG_NUM 6 /* number of configuration items */
|
|
|
|
|
|
/*
|
|
* Value used to indicate that a command line override
|
|
* hasn't been used to modify the value.
|
|
*/
|
|
#define CFG_PARAM_UNSET -1
|
|
|
|
|
|
/*
|
|
* Hold command line parameters.
|
|
*/
|
|
struct ParameterData {
|
|
int value; /* value of this setting */
|
|
int min; /* minimum value */
|
|
int max; /* maximum value */
|
|
int def; /* default value */
|
|
int safe; /* safe value */
|
|
};
|
|
static struct ParameterData cfg_data[] = {
|
|
{ /* adapter id */
|
|
CFG_PARAM_UNSET,
|
|
0,
|
|
15,
|
|
7,
|
|
7
|
|
},
|
|
{ /* max speed */
|
|
CFG_PARAM_UNSET,
|
|
0,
|
|
7,
|
|
1, /* 13.3Mhz */
|
|
4, /* 6.7Hmz */
|
|
},
|
|
{ /* dev mode */
|
|
CFG_PARAM_UNSET,
|
|
0,
|
|
0x3f,
|
|
NTC_DO_PARITY_CHK | NTC_DO_DISCONNECT | NTC_DO_SYNC_NEGO |
|
|
NTC_DO_WIDE_NEGO | NTC_DO_TAG_QUEUEING |
|
|
NTC_DO_SEND_START,
|
|
NTC_DO_PARITY_CHK | NTC_DO_SEND_START
|
|
},
|
|
{ /* adapter mode */
|
|
CFG_PARAM_UNSET,
|
|
0,
|
|
0x2f,
|
|
NAC_SCANLUN |
|
|
NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET
|
|
/*| NAC_ACTIVE_NEG*/,
|
|
NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET | 0x08
|
|
},
|
|
{ /* tags */
|
|
CFG_PARAM_UNSET,
|
|
0,
|
|
5,
|
|
3, /* 16 tags (??) */
|
|
2,
|
|
},
|
|
{ /* reset delay */
|
|
CFG_PARAM_UNSET,
|
|
0,
|
|
180,
|
|
1, /* 1 second */
|
|
10, /* 10 seconds */
|
|
}
|
|
};
|
|
|
|
|
|
/*
|
|
* Safe settings. If set to zero the BIOS/default values with
|
|
* command line overrides will be used. If set to 1 then safe and
|
|
* slow settings will be used.
|
|
*/
|
|
static bool use_safe_settings = 0;
|
|
module_param_named(safe, use_safe_settings, bool, 0);
|
|
MODULE_PARM_DESC(safe, "Use safe and slow settings only. Default: false");
|
|
|
|
|
|
module_param_named(adapter_id, cfg_data[CFG_ADAPTER_ID].value, int, 0);
|
|
MODULE_PARM_DESC(adapter_id, "Adapter SCSI ID. Default 7 (0-15)");
|
|
|
|
module_param_named(max_speed, cfg_data[CFG_MAX_SPEED].value, int, 0);
|
|
MODULE_PARM_DESC(max_speed, "Maximum bus speed. Default 1 (0-7) Speeds: 0=20, 1=13.3, 2=10, 3=8, 4=6.7, 5=5.8, 6=5, 7=4 Mhz");
|
|
|
|
module_param_named(dev_mode, cfg_data[CFG_DEV_MODE].value, int, 0);
|
|
MODULE_PARM_DESC(dev_mode, "Device mode.");
|
|
|
|
module_param_named(adapter_mode, cfg_data[CFG_ADAPTER_MODE].value, int, 0);
|
|
MODULE_PARM_DESC(adapter_mode, "Adapter mode.");
|
|
|
|
module_param_named(tags, cfg_data[CFG_TAGS].value, int, 0);
|
|
MODULE_PARM_DESC(tags, "Number of tags (1<<x). Default 3 (0-5)");
|
|
|
|
module_param_named(reset_delay, cfg_data[CFG_RESET_DELAY].value, int, 0);
|
|
MODULE_PARM_DESC(reset_delay, "Reset delay in seconds. Default 1 (0-180)");
|
|
|
|
|
|
/**
|
|
* set_safe_settings - if the use_safe_settings option is set then
|
|
* set all values to the safe and slow values.
|
|
**/
|
|
static void set_safe_settings(void)
|
|
{
|
|
if (use_safe_settings)
|
|
{
|
|
int i;
|
|
|
|
dprintkl(KERN_INFO, "Using safe settings.\n");
|
|
for (i = 0; i < CFG_NUM; i++)
|
|
{
|
|
cfg_data[i].value = cfg_data[i].safe;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* fix_settings - reset any boot parameters which are out of range
|
|
* back to the default values.
|
|
**/
|
|
static void fix_settings(void)
|
|
{
|
|
int i;
|
|
|
|
dprintkdbg(DBG_1,
|
|
"setup: AdapterId=%08x MaxSpeed=%08x DevMode=%08x "
|
|
"AdapterMode=%08x Tags=%08x ResetDelay=%08x\n",
|
|
cfg_data[CFG_ADAPTER_ID].value,
|
|
cfg_data[CFG_MAX_SPEED].value,
|
|
cfg_data[CFG_DEV_MODE].value,
|
|
cfg_data[CFG_ADAPTER_MODE].value,
|
|
cfg_data[CFG_TAGS].value,
|
|
cfg_data[CFG_RESET_DELAY].value);
|
|
for (i = 0; i < CFG_NUM; i++)
|
|
{
|
|
if (cfg_data[i].value < cfg_data[i].min
|
|
|| cfg_data[i].value > cfg_data[i].max)
|
|
cfg_data[i].value = cfg_data[i].def;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Mapping from the eeprom delay index value (index into this array)
|
|
* to the number of actual seconds that the delay should be for.
|
|
*/
|
|
static char eeprom_index_to_delay_map[] =
|
|
{ 1, 3, 5, 10, 16, 30, 60, 120 };
|
|
|
|
|
|
/**
|
|
* eeprom_index_to_delay - Take the eeprom delay setting and convert it
|
|
* into a number of seconds.
|
|
*
|
|
* @eeprom: The eeprom structure in which we find the delay index to map.
|
|
**/
|
|
static void eeprom_index_to_delay(struct NvRamType *eeprom)
|
|
{
|
|
eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
|
|
}
|
|
|
|
|
|
/**
|
|
* delay_to_eeprom_index - Take a delay in seconds and return the
|
|
* closest eeprom index which will delay for at least that amount of
|
|
* seconds.
|
|
*
|
|
* @delay: The delay, in seconds, to find the eeprom index for.
|
|
**/
|
|
static int delay_to_eeprom_index(int delay)
|
|
{
|
|
u8 idx = 0;
|
|
while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
|
|
idx++;
|
|
return idx;
|
|
}
|
|
|
|
|
|
/**
|
|
* eeprom_override - Override the eeprom settings, in the provided
|
|
* eeprom structure, with values that have been set on the command
|
|
* line.
|
|
*
|
|
* @eeprom: The eeprom data to override with command line options.
|
|
**/
|
|
static void eeprom_override(struct NvRamType *eeprom)
|
|
{
|
|
u8 id;
|
|
|
|
/* Adapter Settings */
|
|
if (cfg_data[CFG_ADAPTER_ID].value != CFG_PARAM_UNSET)
|
|
eeprom->scsi_id = (u8)cfg_data[CFG_ADAPTER_ID].value;
|
|
|
|
if (cfg_data[CFG_ADAPTER_MODE].value != CFG_PARAM_UNSET)
|
|
eeprom->channel_cfg = (u8)cfg_data[CFG_ADAPTER_MODE].value;
|
|
|
|
if (cfg_data[CFG_RESET_DELAY].value != CFG_PARAM_UNSET)
|
|
eeprom->delay_time = delay_to_eeprom_index(
|
|
cfg_data[CFG_RESET_DELAY].value);
|
|
|
|
if (cfg_data[CFG_TAGS].value != CFG_PARAM_UNSET)
|
|
eeprom->max_tag = (u8)cfg_data[CFG_TAGS].value;
|
|
|
|
/* Device Settings */
|
|
for (id = 0; id < DC395x_MAX_SCSI_ID; id++) {
|
|
if (cfg_data[CFG_DEV_MODE].value != CFG_PARAM_UNSET)
|
|
eeprom->target[id].cfg0 =
|
|
(u8)cfg_data[CFG_DEV_MODE].value;
|
|
|
|
if (cfg_data[CFG_MAX_SPEED].value != CFG_PARAM_UNSET)
|
|
eeprom->target[id].period =
|
|
(u8)cfg_data[CFG_MAX_SPEED].value;
|
|
|
|
}
|
|
}
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
---------------------------------------------------------------------------*/
|
|
|
|
static unsigned int list_size(struct list_head *head)
|
|
{
|
|
unsigned int count = 0;
|
|
struct list_head *pos;
|
|
list_for_each(pos, head)
|
|
count++;
|
|
return count;
|
|
}
|
|
|
|
|
|
static struct DeviceCtlBlk *dcb_get_next(struct list_head *head,
|
|
struct DeviceCtlBlk *pos)
|
|
{
|
|
int use_next = 0;
|
|
struct DeviceCtlBlk* next = NULL;
|
|
struct DeviceCtlBlk* i;
|
|
|
|
if (list_empty(head))
|
|
return NULL;
|
|
|
|
/* find supplied dcb and then select the next one */
|
|
list_for_each_entry(i, head, list)
|
|
if (use_next) {
|
|
next = i;
|
|
break;
|
|
} else if (i == pos) {
|
|
use_next = 1;
|
|
}
|
|
/* if no next one take the head one (ie, wraparound) */
|
|
if (!next)
|
|
list_for_each_entry(i, head, list) {
|
|
next = i;
|
|
break;
|
|
}
|
|
|
|
return next;
|
|
}
|
|
|
|
|
|
static void free_tag(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
|
|
{
|
|
if (srb->tag_number < 255) {
|
|
dcb->tag_mask &= ~(1 << srb->tag_number); /* free tag mask */
|
|
srb->tag_number = 255;
|
|
}
|
|
}
|
|
|
|
|
|
/* Find cmd in SRB list */
|
|
static inline struct ScsiReqBlk *find_cmd(struct scsi_cmnd *cmd,
|
|
struct list_head *head)
|
|
{
|
|
struct ScsiReqBlk *i;
|
|
list_for_each_entry(i, head, list)
|
|
if (i->cmd == cmd)
|
|
return i;
|
|
return NULL;
|
|
}
|
|
|
|
|
|
static struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
|
|
{
|
|
struct list_head *head = &acb->srb_free_list;
|
|
struct ScsiReqBlk *srb = NULL;
|
|
|
|
if (!list_empty(head)) {
|
|
srb = list_entry(head->next, struct ScsiReqBlk, list);
|
|
list_del(head->next);
|
|
dprintkdbg(DBG_0, "srb_get_free: srb=%p\n", srb);
|
|
}
|
|
return srb;
|
|
}
|
|
|
|
|
|
static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
|
|
{
|
|
dprintkdbg(DBG_0, "srb_free_insert: srb=%p\n", srb);
|
|
list_add_tail(&srb->list, &acb->srb_free_list);
|
|
}
|
|
|
|
|
|
static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
dprintkdbg(DBG_0, "srb_waiting_insert: (0x%p) <%02i-%i> srb=%p\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun, srb);
|
|
list_add(&srb->list, &dcb->srb_waiting_list);
|
|
}
|
|
|
|
|
|
static void srb_waiting_append(struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
dprintkdbg(DBG_0, "srb_waiting_append: (0x%p) <%02i-%i> srb=%p\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun, srb);
|
|
list_add_tail(&srb->list, &dcb->srb_waiting_list);
|
|
}
|
|
|
|
|
|
static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
|
|
{
|
|
dprintkdbg(DBG_0, "srb_going_append: (0x%p) <%02i-%i> srb=%p\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun, srb);
|
|
list_add_tail(&srb->list, &dcb->srb_going_list);
|
|
}
|
|
|
|
|
|
static void srb_going_remove(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
|
|
{
|
|
struct ScsiReqBlk *i;
|
|
struct ScsiReqBlk *tmp;
|
|
dprintkdbg(DBG_0, "srb_going_remove: (0x%p) <%02i-%i> srb=%p\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun, srb);
|
|
|
|
list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
|
|
if (i == srb) {
|
|
list_del(&srb->list);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
struct ScsiReqBlk *i;
|
|
struct ScsiReqBlk *tmp;
|
|
dprintkdbg(DBG_0, "srb_waiting_remove: (0x%p) <%02i-%i> srb=%p\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun, srb);
|
|
|
|
list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
|
|
if (i == srb) {
|
|
list_del(&srb->list);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
dprintkdbg(DBG_0,
|
|
"srb_going_to_waiting_move: (0x%p) <%02i-%i> srb=%p\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun, srb);
|
|
list_move(&srb->list, &dcb->srb_waiting_list);
|
|
}
|
|
|
|
|
|
static void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
dprintkdbg(DBG_0,
|
|
"srb_waiting_to_going_move: (0x%p) <%02i-%i> srb=%p\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun, srb);
|
|
list_move(&srb->list, &dcb->srb_going_list);
|
|
}
|
|
|
|
|
|
/* Sets the timer to wake us up */
|
|
static void waiting_set_timer(struct AdapterCtlBlk *acb, unsigned long to)
|
|
{
|
|
if (timer_pending(&acb->waiting_timer))
|
|
return;
|
|
if (time_before(jiffies + to, acb->last_reset - HZ / 2))
|
|
acb->waiting_timer.expires =
|
|
acb->last_reset - HZ / 2 + 1;
|
|
else
|
|
acb->waiting_timer.expires = jiffies + to + 1;
|
|
add_timer(&acb->waiting_timer);
|
|
}
|
|
|
|
|
|
/* Send the next command from the waiting list to the bus */
|
|
static void waiting_process_next(struct AdapterCtlBlk *acb)
|
|
{
|
|
struct DeviceCtlBlk *start = NULL;
|
|
struct DeviceCtlBlk *pos;
|
|
struct DeviceCtlBlk *dcb;
|
|
struct ScsiReqBlk *srb;
|
|
struct list_head *dcb_list_head = &acb->dcb_list;
|
|
|
|
if (acb->active_dcb
|
|
|| (acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV)))
|
|
return;
|
|
|
|
if (timer_pending(&acb->waiting_timer))
|
|
del_timer(&acb->waiting_timer);
|
|
|
|
if (list_empty(dcb_list_head))
|
|
return;
|
|
|
|
/*
|
|
* Find the starting dcb. Need to find it again in the list
|
|
* since the list may have changed since we set the ptr to it
|
|
*/
|
|
list_for_each_entry(dcb, dcb_list_head, list)
|
|
if (dcb == acb->dcb_run_robin) {
|
|
start = dcb;
|
|
break;
|
|
}
|
|
if (!start) {
|
|
/* This can happen! */
|
|
start = list_entry(dcb_list_head->next, typeof(*start), list);
|
|
acb->dcb_run_robin = start;
|
|
}
|
|
|
|
|
|
/*
|
|
* Loop over the dcb, but we start somewhere (potentially) in
|
|
* the middle of the loop so we need to manully do this.
|
|
*/
|
|
pos = start;
|
|
do {
|
|
struct list_head *waiting_list_head = &pos->srb_waiting_list;
|
|
|
|
/* Make sure, the next another device gets scheduled ... */
|
|
acb->dcb_run_robin = dcb_get_next(dcb_list_head,
|
|
acb->dcb_run_robin);
|
|
|
|
if (list_empty(waiting_list_head) ||
|
|
pos->max_command <= list_size(&pos->srb_going_list)) {
|
|
/* move to next dcb */
|
|
pos = dcb_get_next(dcb_list_head, pos);
|
|
} else {
|
|
srb = list_entry(waiting_list_head->next,
|
|
struct ScsiReqBlk, list);
|
|
|
|
/* Try to send to the bus */
|
|
if (!start_scsi(acb, pos, srb))
|
|
srb_waiting_to_going_move(pos, srb);
|
|
else
|
|
waiting_set_timer(acb, HZ/50);
|
|
break;
|
|
}
|
|
} while (pos != start);
|
|
}
|
|
|
|
|
|
/* Wake up waiting queue */
|
|
static void waiting_timeout(struct timer_list *t)
|
|
{
|
|
unsigned long flags;
|
|
struct AdapterCtlBlk *acb = from_timer(acb, t, waiting_timer);
|
|
dprintkdbg(DBG_1,
|
|
"waiting_timeout: Queue woken up by timer. acb=%p\n", acb);
|
|
DC395x_LOCK_IO(acb->scsi_host, flags);
|
|
waiting_process_next(acb);
|
|
DC395x_UNLOCK_IO(acb->scsi_host, flags);
|
|
}
|
|
|
|
|
|
/* Get the DCB for a given ID/LUN combination */
|
|
static struct DeviceCtlBlk *find_dcb(struct AdapterCtlBlk *acb, u8 id, u8 lun)
|
|
{
|
|
return acb->children[id][lun];
|
|
}
|
|
|
|
|
|
/* Send SCSI Request Block (srb) to adapter (acb) */
|
|
static void send_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
|
|
{
|
|
struct DeviceCtlBlk *dcb = srb->dcb;
|
|
|
|
if (dcb->max_command <= list_size(&dcb->srb_going_list) ||
|
|
acb->active_dcb ||
|
|
(acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV))) {
|
|
srb_waiting_append(dcb, srb);
|
|
waiting_process_next(acb);
|
|
return;
|
|
}
|
|
|
|
if (!start_scsi(acb, dcb, srb))
|
|
srb_going_append(dcb, srb);
|
|
else {
|
|
srb_waiting_insert(dcb, srb);
|
|
waiting_set_timer(acb, HZ / 50);
|
|
}
|
|
}
|
|
|
|
/* Prepare SRB for being sent to Device DCB w/ command *cmd */
|
|
static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
int nseg;
|
|
enum dma_data_direction dir = cmd->sc_data_direction;
|
|
dprintkdbg(DBG_0, "build_srb: (0x%p) <%02i-%i>\n",
|
|
cmd, dcb->target_id, dcb->target_lun);
|
|
|
|
srb->dcb = dcb;
|
|
srb->cmd = cmd;
|
|
srb->sg_count = 0;
|
|
srb->total_xfer_length = 0;
|
|
srb->sg_bus_addr = 0;
|
|
srb->sg_index = 0;
|
|
srb->adapter_status = 0;
|
|
srb->target_status = 0;
|
|
srb->msg_count = 0;
|
|
srb->status = 0;
|
|
srb->flag = 0;
|
|
srb->state = 0;
|
|
srb->retry_count = 0;
|
|
srb->tag_number = TAG_NONE;
|
|
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
|
|
srb->end_message = 0;
|
|
|
|
nseg = scsi_dma_map(cmd);
|
|
BUG_ON(nseg < 0);
|
|
|
|
if (dir == PCI_DMA_NONE || !nseg) {
|
|
dprintkdbg(DBG_0,
|
|
"build_srb: [0] len=%d buf=%p use_sg=%d !MAP=%08x\n",
|
|
cmd->bufflen, scsi_sglist(cmd), scsi_sg_count(cmd),
|
|
srb->segment_x[0].address);
|
|
} else {
|
|
int i;
|
|
u32 reqlen = scsi_bufflen(cmd);
|
|
struct scatterlist *sg;
|
|
struct SGentry *sgp = srb->segment_x;
|
|
|
|
srb->sg_count = nseg;
|
|
|
|
dprintkdbg(DBG_0,
|
|
"build_srb: [n] len=%d buf=%p use_sg=%d segs=%d\n",
|
|
reqlen, scsi_sglist(cmd), scsi_sg_count(cmd),
|
|
srb->sg_count);
|
|
|
|
scsi_for_each_sg(cmd, sg, srb->sg_count, i) {
|
|
u32 busaddr = (u32)sg_dma_address(sg);
|
|
u32 seglen = (u32)sg->length;
|
|
sgp[i].address = busaddr;
|
|
sgp[i].length = seglen;
|
|
srb->total_xfer_length += seglen;
|
|
}
|
|
sgp += srb->sg_count - 1;
|
|
|
|
/*
|
|
* adjust last page if too big as it is allocated
|
|
* on even page boundaries
|
|
*/
|
|
if (srb->total_xfer_length > reqlen) {
|
|
sgp->length -= (srb->total_xfer_length - reqlen);
|
|
srb->total_xfer_length = reqlen;
|
|
}
|
|
|
|
/* Fixup for WIDE padding - make sure length is even */
|
|
if (dcb->sync_period & WIDE_SYNC &&
|
|
srb->total_xfer_length % 2) {
|
|
srb->total_xfer_length++;
|
|
sgp->length++;
|
|
}
|
|
|
|
srb->sg_bus_addr = pci_map_single(dcb->acb->dev,
|
|
srb->segment_x,
|
|
SEGMENTX_LEN,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
dprintkdbg(DBG_SG, "build_srb: [n] map sg %p->%08x(%05x)\n",
|
|
srb->segment_x, srb->sg_bus_addr, SEGMENTX_LEN);
|
|
}
|
|
|
|
srb->request_length = srb->total_xfer_length;
|
|
}
|
|
|
|
|
|
/**
|
|
* dc395x_queue_command - queue scsi command passed from the mid
|
|
* layer, invoke 'done' on completion
|
|
*
|
|
* @cmd: pointer to scsi command object
|
|
* @done: function pointer to be invoked on completion
|
|
*
|
|
* Returns 1 if the adapter (host) is busy, else returns 0. One
|
|
* reason for an adapter to be busy is that the number
|
|
* of outstanding queued commands is already equal to
|
|
* struct Scsi_Host::can_queue .
|
|
*
|
|
* Required: if struct Scsi_Host::can_queue is ever non-zero
|
|
* then this function is required.
|
|
*
|
|
* Locks: struct Scsi_Host::host_lock held on entry (with "irqsave")
|
|
* and is expected to be held on return.
|
|
*
|
|
**/
|
|
static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
struct DeviceCtlBlk *dcb;
|
|
struct ScsiReqBlk *srb;
|
|
struct AdapterCtlBlk *acb =
|
|
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
|
|
dprintkdbg(DBG_0, "queue_command: (0x%p) <%02i-%i> cmnd=0x%02x\n",
|
|
cmd, cmd->device->id, (u8)cmd->device->lun, cmd->cmnd[0]);
|
|
|
|
/* Assume BAD_TARGET; will be cleared later */
|
|
cmd->result = DID_BAD_TARGET << 16;
|
|
|
|
/* ignore invalid targets */
|
|
if (cmd->device->id >= acb->scsi_host->max_id ||
|
|
cmd->device->lun >= acb->scsi_host->max_lun ||
|
|
cmd->device->lun >31) {
|
|
goto complete;
|
|
}
|
|
|
|
/* does the specified lun on the specified device exist */
|
|
if (!(acb->dcb_map[cmd->device->id] & (1 << cmd->device->lun))) {
|
|
dprintkl(KERN_INFO, "queue_command: Ignore target <%02i-%i>\n",
|
|
cmd->device->id, (u8)cmd->device->lun);
|
|
goto complete;
|
|
}
|
|
|
|
/* do we have a DCB for the device */
|
|
dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
|
|
if (!dcb) {
|
|
/* should never happen */
|
|
dprintkl(KERN_ERR, "queue_command: No such device <%02i-%i>",
|
|
cmd->device->id, (u8)cmd->device->lun);
|
|
goto complete;
|
|
}
|
|
|
|
/* set callback and clear result in the command */
|
|
cmd->scsi_done = done;
|
|
cmd->result = 0;
|
|
|
|
srb = srb_get_free(acb);
|
|
if (!srb)
|
|
{
|
|
/*
|
|
* Return 1 since we are unable to queue this command at this
|
|
* point in time.
|
|
*/
|
|
dprintkdbg(DBG_0, "queue_command: No free srb's\n");
|
|
return 1;
|
|
}
|
|
|
|
build_srb(cmd, dcb, srb);
|
|
|
|
if (!list_empty(&dcb->srb_waiting_list)) {
|
|
/* append to waiting queue */
|
|
srb_waiting_append(dcb, srb);
|
|
waiting_process_next(acb);
|
|
} else {
|
|
/* process immediately */
|
|
send_srb(acb, srb);
|
|
}
|
|
dprintkdbg(DBG_1, "queue_command: (0x%p) done\n", cmd);
|
|
return 0;
|
|
|
|
complete:
|
|
/*
|
|
* Complete the command immediatey, and then return 0 to
|
|
* indicate that we have handled the command. This is usually
|
|
* done when the commad is for things like non existent
|
|
* devices.
|
|
*/
|
|
done(cmd);
|
|
return 0;
|
|
}
|
|
|
|
static DEF_SCSI_QCMD(dc395x_queue_command)
|
|
|
|
/*
|
|
* Return the disk geometry for the given SCSI device.
|
|
*/
|
|
static int dc395x_bios_param(struct scsi_device *sdev,
|
|
struct block_device *bdev, sector_t capacity, int *info)
|
|
{
|
|
#ifdef CONFIG_SCSI_DC395x_TRMS1040_TRADMAP
|
|
int heads, sectors, cylinders;
|
|
struct AdapterCtlBlk *acb;
|
|
int size = capacity;
|
|
|
|
dprintkdbg(DBG_0, "dc395x_bios_param..............\n");
|
|
acb = (struct AdapterCtlBlk *)sdev->host->hostdata;
|
|
heads = 64;
|
|
sectors = 32;
|
|
cylinders = size / (heads * sectors);
|
|
|
|
if ((acb->gmode2 & NAC_GREATER_1G) && (cylinders > 1024)) {
|
|
heads = 255;
|
|
sectors = 63;
|
|
cylinders = size / (heads * sectors);
|
|
}
|
|
geom[0] = heads;
|
|
geom[1] = sectors;
|
|
geom[2] = cylinders;
|
|
return 0;
|
|
#else
|
|
return scsicam_bios_param(bdev, capacity, info);
|
|
#endif
|
|
}
|
|
|
|
|
|
static void dump_register_info(struct AdapterCtlBlk *acb,
|
|
struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
|
|
{
|
|
u16 pstat;
|
|
struct pci_dev *dev = acb->dev;
|
|
pci_read_config_word(dev, PCI_STATUS, &pstat);
|
|
if (!dcb)
|
|
dcb = acb->active_dcb;
|
|
if (!srb && dcb)
|
|
srb = dcb->active_srb;
|
|
if (srb) {
|
|
if (!srb->cmd)
|
|
dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
|
|
srb, srb->cmd);
|
|
else
|
|
dprintkl(KERN_INFO, "dump: srb=%p cmd=%p "
|
|
"cmnd=0x%02x <%02i-%i>\n",
|
|
srb, srb->cmd,
|
|
srb->cmd->cmnd[0], srb->cmd->device->id,
|
|
(u8)srb->cmd->device->lun);
|
|
printk(" sglist=%p cnt=%i idx=%i len=%zu\n",
|
|
srb->segment_x, srb->sg_count, srb->sg_index,
|
|
srb->total_xfer_length);
|
|
printk(" state=0x%04x status=0x%02x phase=0x%02x (%sconn.)\n",
|
|
srb->state, srb->status, srb->scsi_phase,
|
|
(acb->active_dcb) ? "" : "not");
|
|
}
|
|
dprintkl(KERN_INFO, "dump: SCSI{status=0x%04x fifocnt=0x%02x "
|
|
"signals=0x%02x irqstat=0x%02x sync=0x%02x target=0x%02x "
|
|
"rselid=0x%02x ctr=0x%08x irqen=0x%02x config=0x%04x "
|
|
"config2=0x%02x cmd=0x%02x selto=0x%02x}\n",
|
|
DC395x_read16(acb, TRM_S1040_SCSI_STATUS),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_SYNC),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_TARGETID),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_IDMSG),
|
|
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_INTEN),
|
|
DC395x_read16(acb, TRM_S1040_SCSI_CONFIG0),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_CONFIG2),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_COMMAND),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_TIMEOUT));
|
|
dprintkl(KERN_INFO, "dump: DMA{cmd=0x%04x fifocnt=0x%02x fstat=0x%02x "
|
|
"irqstat=0x%02x irqen=0x%02x cfg=0x%04x tctr=0x%08x "
|
|
"ctctr=0x%08x addr=0x%08x:0x%08x}\n",
|
|
DC395x_read16(acb, TRM_S1040_DMA_COMMAND),
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
|
|
DC395x_read8(acb, TRM_S1040_DMA_STATUS),
|
|
DC395x_read8(acb, TRM_S1040_DMA_INTEN),
|
|
DC395x_read16(acb, TRM_S1040_DMA_CONFIG),
|
|
DC395x_read32(acb, TRM_S1040_DMA_XCNT),
|
|
DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
|
|
DC395x_read32(acb, TRM_S1040_DMA_XHIGHADDR),
|
|
DC395x_read32(acb, TRM_S1040_DMA_XLOWADDR));
|
|
dprintkl(KERN_INFO, "dump: gen{gctrl=0x%02x gstat=0x%02x gtmr=0x%02x} "
|
|
"pci{status=0x%04x}\n",
|
|
DC395x_read8(acb, TRM_S1040_GEN_CONTROL),
|
|
DC395x_read8(acb, TRM_S1040_GEN_STATUS),
|
|
DC395x_read8(acb, TRM_S1040_GEN_TIMER),
|
|
pstat);
|
|
}
|
|
|
|
|
|
static inline void clear_fifo(struct AdapterCtlBlk *acb, char *txt)
|
|
{
|
|
#if debug_enabled(DBG_FIFO)
|
|
u8 lines = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
|
|
u8 fifocnt = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
|
|
if (!(fifocnt & 0x40))
|
|
dprintkdbg(DBG_FIFO,
|
|
"clear_fifo: (%i bytes) on phase %02x in %s\n",
|
|
fifocnt & 0x3f, lines, txt);
|
|
#endif
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRFIFO);
|
|
}
|
|
|
|
|
|
static void reset_dev_param(struct AdapterCtlBlk *acb)
|
|
{
|
|
struct DeviceCtlBlk *dcb;
|
|
struct NvRamType *eeprom = &acb->eeprom;
|
|
dprintkdbg(DBG_0, "reset_dev_param: acb=%p\n", acb);
|
|
|
|
list_for_each_entry(dcb, &acb->dcb_list, list) {
|
|
u8 period_index;
|
|
|
|
dcb->sync_mode &= ~(SYNC_NEGO_DONE + WIDE_NEGO_DONE);
|
|
dcb->sync_period = 0;
|
|
dcb->sync_offset = 0;
|
|
|
|
dcb->dev_mode = eeprom->target[dcb->target_id].cfg0;
|
|
period_index = eeprom->target[dcb->target_id].period & 0x07;
|
|
dcb->min_nego_period = clock_period[period_index];
|
|
if (!(dcb->dev_mode & NTC_DO_WIDE_NEGO)
|
|
|| !(acb->config & HCC_WIDE_CARD))
|
|
dcb->sync_mode &= ~WIDE_NEGO_ENABLE;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* perform a hard reset on the SCSI bus
|
|
* @cmd - some command for this host (for fetching hooks)
|
|
* Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
|
|
*/
|
|
static int __dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
struct AdapterCtlBlk *acb =
|
|
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
|
|
dprintkl(KERN_INFO,
|
|
"eh_bus_reset: (0%p) target=<%02i-%i> cmd=%p\n",
|
|
cmd, cmd->device->id, (u8)cmd->device->lun, cmd);
|
|
|
|
if (timer_pending(&acb->waiting_timer))
|
|
del_timer(&acb->waiting_timer);
|
|
|
|
/*
|
|
* disable interrupt
|
|
*/
|
|
DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0x00);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x00);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
|
|
|
|
reset_scsi_bus(acb);
|
|
udelay(500);
|
|
|
|
/* We may be in serious trouble. Wait some seconds */
|
|
acb->last_reset =
|
|
jiffies + 3 * HZ / 2 +
|
|
HZ * acb->eeprom.delay_time;
|
|
|
|
/*
|
|
* re-enable interrupt
|
|
*/
|
|
/* Clear SCSI FIFO */
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
|
|
clear_fifo(acb, "eh_bus_reset");
|
|
/* Delete pending IRQ */
|
|
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
|
|
set_basic_config(acb);
|
|
|
|
reset_dev_param(acb);
|
|
doing_srb_done(acb, DID_RESET, cmd, 0);
|
|
acb->active_dcb = NULL;
|
|
acb->acb_flag = 0; /* RESET_DETECT, RESET_DONE ,RESET_DEV */
|
|
waiting_process_next(acb);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
static int dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
int rc;
|
|
|
|
spin_lock_irq(cmd->device->host->host_lock);
|
|
rc = __dc395x_eh_bus_reset(cmd);
|
|
spin_unlock_irq(cmd->device->host->host_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* abort an errant SCSI command
|
|
* @cmd - command to be aborted
|
|
* Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
|
|
*/
|
|
static int dc395x_eh_abort(struct scsi_cmnd *cmd)
|
|
{
|
|
/*
|
|
* Look into our command queues: If it has not been sent already,
|
|
* we remove it and return success. Otherwise fail.
|
|
*/
|
|
struct AdapterCtlBlk *acb =
|
|
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
|
|
struct DeviceCtlBlk *dcb;
|
|
struct ScsiReqBlk *srb;
|
|
dprintkl(KERN_INFO, "eh_abort: (0x%p) target=<%02i-%i> cmd=%p\n",
|
|
cmd, cmd->device->id, (u8)cmd->device->lun, cmd);
|
|
|
|
dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
|
|
if (!dcb) {
|
|
dprintkl(KERN_DEBUG, "eh_abort: No such device\n");
|
|
return FAILED;
|
|
}
|
|
|
|
srb = find_cmd(cmd, &dcb->srb_waiting_list);
|
|
if (srb) {
|
|
srb_waiting_remove(dcb, srb);
|
|
pci_unmap_srb_sense(acb, srb);
|
|
pci_unmap_srb(acb, srb);
|
|
free_tag(dcb, srb);
|
|
srb_free_insert(acb, srb);
|
|
dprintkl(KERN_DEBUG, "eh_abort: Command was waiting\n");
|
|
cmd->result = DID_ABORT << 16;
|
|
return SUCCESS;
|
|
}
|
|
srb = find_cmd(cmd, &dcb->srb_going_list);
|
|
if (srb) {
|
|
dprintkl(KERN_DEBUG, "eh_abort: Command in progress\n");
|
|
/* XXX: Should abort the command here */
|
|
} else {
|
|
dprintkl(KERN_DEBUG, "eh_abort: Command not found\n");
|
|
}
|
|
return FAILED;
|
|
}
|
|
|
|
|
|
/* SDTR */
|
|
static void build_sdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
u8 *ptr = srb->msgout_buf + srb->msg_count;
|
|
if (srb->msg_count > 1) {
|
|
dprintkl(KERN_INFO,
|
|
"build_sdtr: msgout_buf BUSY (%i: %02x %02x)\n",
|
|
srb->msg_count, srb->msgout_buf[0],
|
|
srb->msgout_buf[1]);
|
|
return;
|
|
}
|
|
if (!(dcb->dev_mode & NTC_DO_SYNC_NEGO)) {
|
|
dcb->sync_offset = 0;
|
|
dcb->min_nego_period = 200 >> 2;
|
|
} else if (dcb->sync_offset == 0)
|
|
dcb->sync_offset = SYNC_NEGO_OFFSET;
|
|
|
|
*ptr++ = MSG_EXTENDED; /* (01h) */
|
|
*ptr++ = 3; /* length */
|
|
*ptr++ = EXTENDED_SDTR; /* (01h) */
|
|
*ptr++ = dcb->min_nego_period; /* Transfer period (in 4ns) */
|
|
*ptr++ = dcb->sync_offset; /* Transfer period (max. REQ/ACK dist) */
|
|
srb->msg_count += 5;
|
|
srb->state |= SRB_DO_SYNC_NEGO;
|
|
}
|
|
|
|
|
|
/* WDTR */
|
|
static void build_wdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
u8 wide = ((dcb->dev_mode & NTC_DO_WIDE_NEGO) &
|
|
(acb->config & HCC_WIDE_CARD)) ? 1 : 0;
|
|
u8 *ptr = srb->msgout_buf + srb->msg_count;
|
|
if (srb->msg_count > 1) {
|
|
dprintkl(KERN_INFO,
|
|
"build_wdtr: msgout_buf BUSY (%i: %02x %02x)\n",
|
|
srb->msg_count, srb->msgout_buf[0],
|
|
srb->msgout_buf[1]);
|
|
return;
|
|
}
|
|
*ptr++ = MSG_EXTENDED; /* (01h) */
|
|
*ptr++ = 2; /* length */
|
|
*ptr++ = EXTENDED_WDTR; /* (03h) */
|
|
*ptr++ = wide;
|
|
srb->msg_count += 4;
|
|
srb->state |= SRB_DO_WIDE_NEGO;
|
|
}
|
|
|
|
|
|
#if 0
|
|
/* Timer to work around chip flaw: When selecting and the bus is
|
|
* busy, we sometimes miss a Selection timeout IRQ */
|
|
void selection_timeout_missed(unsigned long ptr);
|
|
/* Sets the timer to wake us up */
|
|
static void selto_timer(struct AdapterCtlBlk *acb)
|
|
{
|
|
if (timer_pending(&acb->selto_timer))
|
|
return;
|
|
acb->selto_timer.function = selection_timeout_missed;
|
|
acb->selto_timer.data = (unsigned long) acb;
|
|
if (time_before
|
|
(jiffies + HZ, acb->last_reset + HZ / 2))
|
|
acb->selto_timer.expires =
|
|
acb->last_reset + HZ / 2 + 1;
|
|
else
|
|
acb->selto_timer.expires = jiffies + HZ + 1;
|
|
add_timer(&acb->selto_timer);
|
|
}
|
|
|
|
|
|
void selection_timeout_missed(unsigned long ptr)
|
|
{
|
|
unsigned long flags;
|
|
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
|
|
struct ScsiReqBlk *srb;
|
|
dprintkl(KERN_DEBUG, "Chip forgot to produce SelTO IRQ!\n");
|
|
if (!acb->active_dcb || !acb->active_dcb->active_srb) {
|
|
dprintkl(KERN_DEBUG, "... but no cmd pending? Oops!\n");
|
|
return;
|
|
}
|
|
DC395x_LOCK_IO(acb->scsi_host, flags);
|
|
srb = acb->active_dcb->active_srb;
|
|
disconnect(acb);
|
|
DC395x_UNLOCK_IO(acb->scsi_host, flags);
|
|
}
|
|
#endif
|
|
|
|
|
|
static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
|
|
struct ScsiReqBlk* srb)
|
|
{
|
|
u16 s_stat2, return_code;
|
|
u8 s_stat, scsicommand, i, identify_message;
|
|
u8 *ptr;
|
|
dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> srb=%p\n",
|
|
dcb->target_id, dcb->target_lun, srb);
|
|
|
|
srb->tag_number = TAG_NONE; /* acb->tag_max_num: had error read in eeprom */
|
|
|
|
s_stat = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
|
|
s_stat2 = 0;
|
|
s_stat2 = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
|
|
#if 1
|
|
if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
|
|
dprintkdbg(DBG_KG, "start_scsi: (0x%p) BUSY %02x %04x\n",
|
|
s_stat, s_stat2);
|
|
/*
|
|
* Try anyway?
|
|
*
|
|
* We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection
|
|
* Timeout, a Disconnect or a Reselection IRQ, so we would be screwed!
|
|
* (This is likely to be a bug in the hardware. Obviously, most people
|
|
* only have one initiator per SCSI bus.)
|
|
* Instead let this fail and have the timer make sure the command is
|
|
* tried again after a short time
|
|
*/
|
|
/*selto_timer (acb); */
|
|
return 1;
|
|
}
|
|
#endif
|
|
if (acb->active_dcb) {
|
|
dprintkl(KERN_DEBUG, "start_scsi: (0x%p) Attempt to start a"
|
|
"command while another command (0x%p) is active.",
|
|
srb->cmd,
|
|
acb->active_dcb->active_srb ?
|
|
acb->active_dcb->active_srb->cmd : 0);
|
|
return 1;
|
|
}
|
|
if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
|
|
dprintkdbg(DBG_KG, "start_scsi: (0x%p) Failed (busy)\n", srb->cmd);
|
|
return 1;
|
|
}
|
|
/* Allow starting of SCSI commands half a second before we allow the mid-level
|
|
* to queue them again after a reset */
|
|
if (time_before(jiffies, acb->last_reset - HZ / 2)) {
|
|
dprintkdbg(DBG_KG, "start_scsi: Refuse cmds (reset wait)\n");
|
|
return 1;
|
|
}
|
|
|
|
/* Flush FIFO */
|
|
clear_fifo(acb, "start_scsi");
|
|
DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset);
|
|
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
|
|
|
|
identify_message = dcb->identify_msg;
|
|
/*DC395x_TRM_write8(TRM_S1040_SCSI_IDMSG, identify_message); */
|
|
/* Don't allow disconnection for AUTO_REQSENSE: Cont.All.Cond.! */
|
|
if (srb->flag & AUTO_REQSENSE)
|
|
identify_message &= 0xBF;
|
|
|
|
if (((srb->cmd->cmnd[0] == INQUIRY)
|
|
|| (srb->cmd->cmnd[0] == REQUEST_SENSE)
|
|
|| (srb->flag & AUTO_REQSENSE))
|
|
&& (((dcb->sync_mode & WIDE_NEGO_ENABLE)
|
|
&& !(dcb->sync_mode & WIDE_NEGO_DONE))
|
|
|| ((dcb->sync_mode & SYNC_NEGO_ENABLE)
|
|
&& !(dcb->sync_mode & SYNC_NEGO_DONE)))
|
|
&& (dcb->target_lun == 0)) {
|
|
srb->msgout_buf[0] = identify_message;
|
|
srb->msg_count = 1;
|
|
scsicommand = SCMD_SEL_ATNSTOP;
|
|
srb->state = SRB_MSGOUT;
|
|
#ifndef SYNC_FIRST
|
|
if (dcb->sync_mode & WIDE_NEGO_ENABLE
|
|
&& dcb->inquiry7 & SCSI_INQ_WBUS16) {
|
|
build_wdtr(acb, dcb, srb);
|
|
goto no_cmd;
|
|
}
|
|
#endif
|
|
if (dcb->sync_mode & SYNC_NEGO_ENABLE
|
|
&& dcb->inquiry7 & SCSI_INQ_SYNC) {
|
|
build_sdtr(acb, dcb, srb);
|
|
goto no_cmd;
|
|
}
|
|
if (dcb->sync_mode & WIDE_NEGO_ENABLE
|
|
&& dcb->inquiry7 & SCSI_INQ_WBUS16) {
|
|
build_wdtr(acb, dcb, srb);
|
|
goto no_cmd;
|
|
}
|
|
srb->msg_count = 0;
|
|
}
|
|
/* Send identify message */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, identify_message);
|
|
|
|
scsicommand = SCMD_SEL_ATN;
|
|
srb->state = SRB_START_;
|
|
#ifndef DC395x_NO_TAGQ
|
|
if ((dcb->sync_mode & EN_TAG_QUEUEING)
|
|
&& (identify_message & 0xC0)) {
|
|
/* Send Tag message */
|
|
u32 tag_mask = 1;
|
|
u8 tag_number = 0;
|
|
while (tag_mask & dcb->tag_mask
|
|
&& tag_number < dcb->max_command) {
|
|
tag_mask = tag_mask << 1;
|
|
tag_number++;
|
|
}
|
|
if (tag_number >= dcb->max_command) {
|
|
dprintkl(KERN_WARNING, "start_scsi: (0x%p) "
|
|
"Out of tags target=<%02i-%i>)\n",
|
|
srb->cmd, srb->cmd->device->id,
|
|
(u8)srb->cmd->device->lun);
|
|
srb->state = SRB_READY;
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
|
|
DO_HWRESELECT);
|
|
return 1;
|
|
}
|
|
/* Send Tag id */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_SIMPLE_QTAG);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, tag_number);
|
|
dcb->tag_mask |= tag_mask;
|
|
srb->tag_number = tag_number;
|
|
scsicommand = SCMD_SEL_ATN3;
|
|
srb->state = SRB_START_;
|
|
}
|
|
#endif
|
|
/*polling:*/
|
|
/* Send CDB ..command block ......... */
|
|
dprintkdbg(DBG_KG, "start_scsi: (0x%p) <%02i-%i> cmnd=0x%02x tag=%i\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun,
|
|
srb->cmd->cmnd[0], srb->tag_number);
|
|
if (srb->flag & AUTO_REQSENSE) {
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5));
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, SCSI_SENSE_BUFFERSIZE);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
|
|
} else {
|
|
ptr = (u8 *)srb->cmd->cmnd;
|
|
for (i = 0; i < srb->cmd->cmd_len; i++)
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
|
|
}
|
|
no_cmd:
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
|
|
DO_HWRESELECT | DO_DATALATCH);
|
|
if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
|
|
/*
|
|
* If start_scsi return 1:
|
|
* we caught an interrupt (must be reset or reselection ... )
|
|
* : Let's process it first!
|
|
*/
|
|
dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> Failed - busy\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun);
|
|
srb->state = SRB_READY;
|
|
free_tag(dcb, srb);
|
|
srb->msg_count = 0;
|
|
return_code = 1;
|
|
/* This IRQ should NOT get lost, as we did not acknowledge it */
|
|
} else {
|
|
/*
|
|
* If start_scsi returns 0:
|
|
* we know that the SCSI processor is free
|
|
*/
|
|
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
|
|
dcb->active_srb = srb;
|
|
acb->active_dcb = dcb;
|
|
return_code = 0;
|
|
/* it's important for atn stop */
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
|
|
DO_DATALATCH | DO_HWRESELECT);
|
|
/* SCSI command */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, scsicommand);
|
|
}
|
|
return return_code;
|
|
}
|
|
|
|
|
|
#define DC395x_ENABLE_MSGOUT \
|
|
DC395x_write16 (acb, TRM_S1040_SCSI_CONTROL, DO_SETATN); \
|
|
srb->state |= SRB_MSGOUT
|
|
|
|
|
|
/* abort command */
|
|
static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
srb->msgout_buf[0] = ABORT;
|
|
srb->msg_count = 1;
|
|
DC395x_ENABLE_MSGOUT;
|
|
srb->state &= ~SRB_MSGIN;
|
|
srb->state |= SRB_MSGOUT;
|
|
}
|
|
|
|
|
|
/**
|
|
* dc395x_handle_interrupt - Handle an interrupt that has been confirmed to
|
|
* have been triggered for this card.
|
|
*
|
|
* @acb: a pointer to the adpter control block
|
|
* @scsi_status: the status return when we checked the card
|
|
**/
|
|
static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
|
|
u16 scsi_status)
|
|
{
|
|
struct DeviceCtlBlk *dcb;
|
|
struct ScsiReqBlk *srb;
|
|
u16 phase;
|
|
u8 scsi_intstatus;
|
|
unsigned long flags;
|
|
void (*dc395x_statev)(struct AdapterCtlBlk *, struct ScsiReqBlk *,
|
|
u16 *);
|
|
|
|
DC395x_LOCK_IO(acb->scsi_host, flags);
|
|
|
|
/* This acknowledges the IRQ */
|
|
scsi_intstatus = DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
|
|
if ((scsi_status & 0x2007) == 0x2002)
|
|
dprintkl(KERN_DEBUG,
|
|
"COP after COP completed? %04x\n", scsi_status);
|
|
if (debug_enabled(DBG_KG)) {
|
|
if (scsi_intstatus & INT_SELTIMEOUT)
|
|
dprintkdbg(DBG_KG, "handle_interrupt: Selection timeout\n");
|
|
}
|
|
/*dprintkl(KERN_DEBUG, "handle_interrupt: intstatus = 0x%02x ", scsi_intstatus); */
|
|
|
|
if (timer_pending(&acb->selto_timer))
|
|
del_timer(&acb->selto_timer);
|
|
|
|
if (scsi_intstatus & (INT_SELTIMEOUT | INT_DISCONNECT)) {
|
|
disconnect(acb); /* bus free interrupt */
|
|
goto out_unlock;
|
|
}
|
|
if (scsi_intstatus & INT_RESELECTED) {
|
|
reselect(acb);
|
|
goto out_unlock;
|
|
}
|
|
if (scsi_intstatus & INT_SELECT) {
|
|
dprintkl(KERN_INFO, "Host does not support target mode!\n");
|
|
goto out_unlock;
|
|
}
|
|
if (scsi_intstatus & INT_SCSIRESET) {
|
|
scsi_reset_detect(acb);
|
|
goto out_unlock;
|
|
}
|
|
if (scsi_intstatus & (INT_BUSSERVICE | INT_CMDDONE)) {
|
|
dcb = acb->active_dcb;
|
|
if (!dcb) {
|
|
dprintkl(KERN_DEBUG,
|
|
"Oops: BusService (%04x %02x) w/o ActiveDCB!\n",
|
|
scsi_status, scsi_intstatus);
|
|
goto out_unlock;
|
|
}
|
|
srb = dcb->active_srb;
|
|
if (dcb->flag & ABORT_DEV_) {
|
|
dprintkdbg(DBG_0, "MsgOut Abort Device.....\n");
|
|
enable_msgout_abort(acb, srb);
|
|
}
|
|
|
|
/* software sequential machine */
|
|
phase = (u16)srb->scsi_phase;
|
|
|
|
/*
|
|
* 62037 or 62137
|
|
* call dc395x_scsi_phase0[]... "phase entry"
|
|
* handle every phase before start transfer
|
|
*/
|
|
/* data_out_phase0, phase:0 */
|
|
/* data_in_phase0, phase:1 */
|
|
/* command_phase0, phase:2 */
|
|
/* status_phase0, phase:3 */
|
|
/* nop0, phase:4 PH_BUS_FREE .. initial phase */
|
|
/* nop0, phase:5 PH_BUS_FREE .. initial phase */
|
|
/* msgout_phase0, phase:6 */
|
|
/* msgin_phase0, phase:7 */
|
|
dc395x_statev = dc395x_scsi_phase0[phase];
|
|
dc395x_statev(acb, srb, &scsi_status);
|
|
|
|
/*
|
|
* if there were any exception occurred scsi_status
|
|
* will be modify to bus free phase new scsi_status
|
|
* transfer out from ... previous dc395x_statev
|
|
*/
|
|
srb->scsi_phase = scsi_status & PHASEMASK;
|
|
phase = (u16)scsi_status & PHASEMASK;
|
|
|
|
/*
|
|
* call dc395x_scsi_phase1[]... "phase entry" handle
|
|
* every phase to do transfer
|
|
*/
|
|
/* data_out_phase1, phase:0 */
|
|
/* data_in_phase1, phase:1 */
|
|
/* command_phase1, phase:2 */
|
|
/* status_phase1, phase:3 */
|
|
/* nop1, phase:4 PH_BUS_FREE .. initial phase */
|
|
/* nop1, phase:5 PH_BUS_FREE .. initial phase */
|
|
/* msgout_phase1, phase:6 */
|
|
/* msgin_phase1, phase:7 */
|
|
dc395x_statev = dc395x_scsi_phase1[phase];
|
|
dc395x_statev(acb, srb, &scsi_status);
|
|
}
|
|
out_unlock:
|
|
DC395x_UNLOCK_IO(acb->scsi_host, flags);
|
|
}
|
|
|
|
|
|
static irqreturn_t dc395x_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct AdapterCtlBlk *acb = dev_id;
|
|
u16 scsi_status;
|
|
u8 dma_status;
|
|
irqreturn_t handled = IRQ_NONE;
|
|
|
|
/*
|
|
* Check for pending interrupt
|
|
*/
|
|
scsi_status = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
|
|
dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
|
|
if (scsi_status & SCSIINTERRUPT) {
|
|
/* interrupt pending - let's process it! */
|
|
dc395x_handle_interrupt(acb, scsi_status);
|
|
handled = IRQ_HANDLED;
|
|
}
|
|
else if (dma_status & 0x20) {
|
|
/* Error from the DMA engine */
|
|
dprintkl(KERN_INFO, "Interrupt from DMA engine: 0x%02x!\n", dma_status);
|
|
#if 0
|
|
dprintkl(KERN_INFO, "This means DMA error! Try to handle ...\n");
|
|
if (acb->active_dcb) {
|
|
acb->active_dcb-> flag |= ABORT_DEV_;
|
|
if (acb->active_dcb->active_srb)
|
|
enable_msgout_abort(acb, acb->active_dcb->active_srb);
|
|
}
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, ABORTXFER | CLRXFIFO);
|
|
#else
|
|
dprintkl(KERN_INFO, "Ignoring DMA error (probably a bad thing) ...\n");
|
|
acb = NULL;
|
|
#endif
|
|
handled = IRQ_HANDLED;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
|
|
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
dprintkdbg(DBG_0, "msgout_phase0: (0x%p)\n", srb->cmd);
|
|
if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
|
|
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
|
|
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
srb->state &= ~SRB_MSGOUT;
|
|
}
|
|
|
|
|
|
static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
u16 i;
|
|
u8 *ptr;
|
|
dprintkdbg(DBG_0, "msgout_phase1: (0x%p)\n", srb->cmd);
|
|
|
|
clear_fifo(acb, "msgout_phase1");
|
|
if (!(srb->state & SRB_MSGOUT)) {
|
|
srb->state |= SRB_MSGOUT;
|
|
dprintkl(KERN_DEBUG,
|
|
"msgout_phase1: (0x%p) Phase unexpected\n",
|
|
srb->cmd); /* So what ? */
|
|
}
|
|
if (!srb->msg_count) {
|
|
dprintkdbg(DBG_0, "msgout_phase1: (0x%p) NOP msg\n",
|
|
srb->cmd);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
|
|
return;
|
|
}
|
|
ptr = (u8 *)srb->msgout_buf;
|
|
for (i = 0; i < srb->msg_count; i++)
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
|
|
srb->msg_count = 0;
|
|
if (srb->msgout_buf[0] == MSG_ABORT)
|
|
srb->state = SRB_ABORT_SENT;
|
|
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
|
|
}
|
|
|
|
|
|
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
dprintkdbg(DBG_0, "command_phase0: (0x%p)\n", srb->cmd);
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
|
|
}
|
|
|
|
|
|
static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
struct DeviceCtlBlk *dcb;
|
|
u8 *ptr;
|
|
u16 i;
|
|
dprintkdbg(DBG_0, "command_phase1: (0x%p)\n", srb->cmd);
|
|
|
|
clear_fifo(acb, "command_phase1");
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
|
|
if (!(srb->flag & AUTO_REQSENSE)) {
|
|
ptr = (u8 *)srb->cmd->cmnd;
|
|
for (i = 0; i < srb->cmd->cmd_len; i++) {
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr);
|
|
ptr++;
|
|
}
|
|
} else {
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
|
|
dcb = acb->active_dcb;
|
|
/* target id */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5));
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, SCSI_SENSE_BUFFERSIZE);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
|
|
}
|
|
srb->state |= SRB_COMMAND;
|
|
/* it's important for atn stop */
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
|
|
/* SCSI command */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
|
|
}
|
|
|
|
|
|
/*
|
|
* Verify that the remaining space in the hw sg lists is the same as
|
|
* the count of remaining bytes in srb->total_xfer_length
|
|
*/
|
|
static void sg_verify_length(struct ScsiReqBlk *srb)
|
|
{
|
|
if (debug_enabled(DBG_SG)) {
|
|
unsigned len = 0;
|
|
unsigned idx = srb->sg_index;
|
|
struct SGentry *psge = srb->segment_x + idx;
|
|
for (; idx < srb->sg_count; psge++, idx++)
|
|
len += psge->length;
|
|
if (len != srb->total_xfer_length)
|
|
dprintkdbg(DBG_SG,
|
|
"Inconsistent SRB S/G lengths (Tot=%i, Count=%i) !!\n",
|
|
srb->total_xfer_length, len);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Compute the next Scatter Gather list index and adjust its length
|
|
* and address if necessary
|
|
*/
|
|
static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
|
|
{
|
|
u8 idx;
|
|
u32 xferred = srb->total_xfer_length - left; /* bytes transferred */
|
|
struct SGentry *psge = srb->segment_x + srb->sg_index;
|
|
|
|
dprintkdbg(DBG_0,
|
|
"sg_update_list: Transferred %i of %i bytes, %i remain\n",
|
|
xferred, srb->total_xfer_length, left);
|
|
if (xferred == 0) {
|
|
/* nothing to update since we did not transfer any data */
|
|
return;
|
|
}
|
|
|
|
sg_verify_length(srb);
|
|
srb->total_xfer_length = left; /* update remaining count */
|
|
for (idx = srb->sg_index; idx < srb->sg_count; idx++) {
|
|
if (xferred >= psge->length) {
|
|
/* Complete SG entries done */
|
|
xferred -= psge->length;
|
|
} else {
|
|
/* Partial SG entry done */
|
|
psge->length -= xferred;
|
|
psge->address += xferred;
|
|
srb->sg_index = idx;
|
|
pci_dma_sync_single_for_device(srb->dcb->
|
|
acb->dev,
|
|
srb->sg_bus_addr,
|
|
SEGMENTX_LEN,
|
|
PCI_DMA_TODEVICE);
|
|
break;
|
|
}
|
|
psge++;
|
|
}
|
|
sg_verify_length(srb);
|
|
}
|
|
|
|
|
|
/*
|
|
* We have transferred a single byte (PIO mode?) and need to update
|
|
* the count of bytes remaining (total_xfer_length) and update the sg
|
|
* entry to either point to next byte in the current sg entry, or of
|
|
* already at the end to point to the start of the next sg entry
|
|
*/
|
|
static void sg_subtract_one(struct ScsiReqBlk *srb)
|
|
{
|
|
sg_update_list(srb, srb->total_xfer_length - 1);
|
|
}
|
|
|
|
|
|
/*
|
|
* cleanup_after_transfer
|
|
*
|
|
* Makes sure, DMA and SCSI engine are empty, after the transfer has finished
|
|
* KG: Currently called from StatusPhase1 ()
|
|
* Should probably also be called from other places
|
|
* Best might be to call it in DataXXPhase0, if new phase will differ
|
|
*/
|
|
static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
/*DC395x_write8 (TRM_S1040_DMA_STATUS, FORCEDMACOMP); */
|
|
if (DC395x_read16(acb, TRM_S1040_DMA_COMMAND) & 0x0001) { /* read */
|
|
if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
|
|
clear_fifo(acb, "cleanup/in");
|
|
if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
|
|
} else { /* write */
|
|
if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
|
|
if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
|
|
clear_fifo(acb, "cleanup/out");
|
|
}
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
|
|
}
|
|
|
|
|
|
/*
|
|
* Those no of bytes will be transferred w/ PIO through the SCSI FIFO
|
|
* Seems to be needed for unknown reasons; could be a hardware bug :-(
|
|
*/
|
|
#define DC395x_LASTPIO 4
|
|
|
|
|
|
static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
struct DeviceCtlBlk *dcb = srb->dcb;
|
|
u16 scsi_status = *pscsi_status;
|
|
u32 d_left_counter = 0;
|
|
dprintkdbg(DBG_0, "data_out_phase0: (0x%p) <%02i-%i>\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun);
|
|
|
|
/*
|
|
* KG: We need to drain the buffers before we draw any conclusions!
|
|
* This means telling the DMA to push the rest into SCSI, telling
|
|
* SCSI to push the rest to the bus.
|
|
* However, the device might have been the one to stop us (phase
|
|
* change), and the data in transit just needs to be accounted so
|
|
* it can be retransmitted.)
|
|
*/
|
|
/*
|
|
* KG: Stop DMA engine pushing more data into the SCSI FIFO
|
|
* If we need more data, the DMA SG list will be freshly set up, anyway
|
|
*/
|
|
dprintkdbg(DBG_PIO, "data_out_phase0: "
|
|
"DMA{fifocnt=0x%02x fifostat=0x%02x} "
|
|
"SCSI{fifocnt=0x%02x cnt=0x%06x status=0x%04x} total=0x%06x\n",
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
|
|
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
|
|
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER), scsi_status,
|
|
srb->total_xfer_length);
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, STOPDMAXFER | CLRXFIFO);
|
|
|
|
if (!(srb->state & SRB_XFERPAD)) {
|
|
if (scsi_status & PARITYERROR)
|
|
srb->status |= PARITY_ERROR;
|
|
|
|
/*
|
|
* KG: Right, we can't just rely on the SCSI_COUNTER, because this
|
|
* is the no of bytes it got from the DMA engine not the no it
|
|
* transferred successfully to the device. (And the difference could
|
|
* be as much as the FIFO size, I guess ...)
|
|
*/
|
|
if (!(scsi_status & SCSIXFERDONE)) {
|
|
/*
|
|
* when data transfer from DMA FIFO to SCSI FIFO
|
|
* if there was some data left in SCSI FIFO
|
|
*/
|
|
d_left_counter =
|
|
(u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
|
|
0x1F);
|
|
if (dcb->sync_period & WIDE_SYNC)
|
|
d_left_counter <<= 1;
|
|
|
|
dprintkdbg(DBG_KG, "data_out_phase0: FIFO contains %i %s\n"
|
|
"SCSI{fifocnt=0x%02x cnt=0x%08x} "
|
|
"DMA{fifocnt=0x%04x cnt=0x%02x ctr=0x%08x}\n",
|
|
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
|
|
(dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
|
|
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
|
|
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
|
|
DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
|
|
}
|
|
/*
|
|
* calculate all the residue data that not yet tranfered
|
|
* SCSI transfer counter + left in SCSI FIFO data
|
|
*
|
|
* .....TRM_S1040_SCSI_COUNTER (24bits)
|
|
* The counter always decrement by one for every SCSI byte transfer.
|
|
* .....TRM_S1040_SCSI_FIFOCNT ( 5bits)
|
|
* The counter is SCSI FIFO offset counter (in units of bytes or! words)
|
|
*/
|
|
if (srb->total_xfer_length > DC395x_LASTPIO)
|
|
d_left_counter +=
|
|
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER);
|
|
|
|
/* Is this a good idea? */
|
|
/*clear_fifo(acb, "DOP1"); */
|
|
/* KG: What is this supposed to be useful for? WIDE padding stuff? */
|
|
if (d_left_counter == 1 && dcb->sync_period & WIDE_SYNC
|
|
&& scsi_bufflen(srb->cmd) % 2) {
|
|
d_left_counter = 0;
|
|
dprintkl(KERN_INFO,
|
|
"data_out_phase0: Discard 1 byte (0x%02x)\n",
|
|
scsi_status);
|
|
}
|
|
/*
|
|
* KG: Oops again. Same thinko as above: The SCSI might have been
|
|
* faster than the DMA engine, so that it ran out of data.
|
|
* In that case, we have to do just nothing!
|
|
* But: Why the interrupt: No phase change. No XFERCNT_2_ZERO. Or?
|
|
*/
|
|
/*
|
|
* KG: This is nonsense: We have been WRITING data to the bus
|
|
* If the SCSI engine has no bytes left, how should the DMA engine?
|
|
*/
|
|
if (d_left_counter == 0) {
|
|
srb->total_xfer_length = 0;
|
|
} else {
|
|
/*
|
|
* if transfer not yet complete
|
|
* there were some data residue in SCSI FIFO or
|
|
* SCSI transfer counter not empty
|
|
*/
|
|
long oldxferred =
|
|
srb->total_xfer_length - d_left_counter;
|
|
const int diff =
|
|
(dcb->sync_period & WIDE_SYNC) ? 2 : 1;
|
|
sg_update_list(srb, d_left_counter);
|
|
/* KG: Most ugly hack! Apparently, this works around a chip bug */
|
|
if ((srb->segment_x[srb->sg_index].length ==
|
|
diff && scsi_sg_count(srb->cmd))
|
|
|| ((oldxferred & ~PAGE_MASK) ==
|
|
(PAGE_SIZE - diff))
|
|
) {
|
|
dprintkl(KERN_INFO, "data_out_phase0: "
|
|
"Work around chip bug (%i)?\n", diff);
|
|
d_left_counter =
|
|
srb->total_xfer_length - diff;
|
|
sg_update_list(srb, d_left_counter);
|
|
/*srb->total_xfer_length -= diff; */
|
|
/*srb->virt_addr += diff; */
|
|
/*if (srb->cmd->use_sg) */
|
|
/* srb->sg_index++; */
|
|
}
|
|
}
|
|
}
|
|
if ((*pscsi_status & PHASEMASK) != PH_DATA_OUT) {
|
|
cleanup_after_transfer(acb, srb);
|
|
}
|
|
}
|
|
|
|
|
|
static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
dprintkdbg(DBG_0, "data_out_phase1: (0x%p) <%02i-%i>\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun);
|
|
clear_fifo(acb, "data_out_phase1");
|
|
/* do prepare before transfer when data out phase */
|
|
data_io_transfer(acb, srb, XFERDATAOUT);
|
|
}
|
|
|
|
static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
u16 scsi_status = *pscsi_status;
|
|
|
|
dprintkdbg(DBG_0, "data_in_phase0: (0x%p) <%02i-%i>\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun);
|
|
|
|
/*
|
|
* KG: DataIn is much more tricky than DataOut. When the device is finished
|
|
* and switches to another phase, the SCSI engine should be finished too.
|
|
* But: There might still be bytes left in its FIFO to be fetched by the DMA
|
|
* engine and transferred to memory.
|
|
* We should wait for the FIFOs to be emptied by that (is there any way to
|
|
* enforce this?) and then stop the DMA engine, because it might think, that
|
|
* there are more bytes to follow. Yes, the device might disconnect prior to
|
|
* having all bytes transferred!
|
|
* Also we should make sure that all data from the DMA engine buffer's really
|
|
* made its way to the system memory! Some documentation on this would not
|
|
* seem to be a bad idea, actually.
|
|
*/
|
|
if (!(srb->state & SRB_XFERPAD)) {
|
|
u32 d_left_counter;
|
|
unsigned int sc, fc;
|
|
|
|
if (scsi_status & PARITYERROR) {
|
|
dprintkl(KERN_INFO, "data_in_phase0: (0x%p) "
|
|
"Parity Error\n", srb->cmd);
|
|
srb->status |= PARITY_ERROR;
|
|
}
|
|
/*
|
|
* KG: We should wait for the DMA FIFO to be empty ...
|
|
* but: it would be better to wait first for the SCSI FIFO and then the
|
|
* the DMA FIFO to become empty? How do we know, that the device not already
|
|
* sent data to the FIFO in a MsgIn phase, eg.?
|
|
*/
|
|
if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80)) {
|
|
#if 0
|
|
int ctr = 6000000;
|
|
dprintkl(KERN_DEBUG,
|
|
"DIP0: Wait for DMA FIFO to flush ...\n");
|
|
/*DC395x_write8 (TRM_S1040_DMA_CONTROL, STOPDMAXFER); */
|
|
/*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 7); */
|
|
/*DC395x_write8 (TRM_S1040_SCSI_COMMAND, SCMD_DMA_IN); */
|
|
while (!
|
|
(DC395x_read16(acb, TRM_S1040_DMA_FIFOSTAT) &
|
|
0x80) && --ctr);
|
|
if (ctr < 6000000 - 1)
|
|
dprintkl(KERN_DEBUG
|
|
"DIP0: Had to wait for DMA ...\n");
|
|
if (!ctr)
|
|
dprintkl(KERN_ERR,
|
|
"Deadlock in DIP0 waiting for DMA FIFO empty!!\n");
|
|
/*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 0); */
|
|
#endif
|
|
dprintkdbg(DBG_KG, "data_in_phase0: "
|
|
"DMA{fifocnt=0x%02x fifostat=0x%02x}\n",
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT));
|
|
}
|
|
/* Now: Check remainig data: The SCSI counters should tell us ... */
|
|
sc = DC395x_read32(acb, TRM_S1040_SCSI_COUNTER);
|
|
fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
|
|
d_left_counter = sc + ((fc & 0x1f)
|
|
<< ((srb->dcb->sync_period & WIDE_SYNC) ? 1 :
|
|
0));
|
|
dprintkdbg(DBG_KG, "data_in_phase0: "
|
|
"SCSI{fifocnt=0x%02x%s ctr=0x%08x} "
|
|
"DMA{fifocnt=0x%02x fifostat=0x%02x ctr=0x%08x} "
|
|
"Remain{totxfer=%i scsi_fifo+ctr=%i}\n",
|
|
fc,
|
|
(srb->dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
|
|
sc,
|
|
fc,
|
|
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
|
|
DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
|
|
srb->total_xfer_length, d_left_counter);
|
|
#if DC395x_LASTPIO
|
|
/* KG: Less than or equal to 4 bytes can not be transferred via DMA, it seems. */
|
|
if (d_left_counter
|
|
&& srb->total_xfer_length <= DC395x_LASTPIO) {
|
|
size_t left_io = srb->total_xfer_length;
|
|
|
|
/*u32 addr = (srb->segment_x[srb->sg_index].address); */
|
|
/*sg_update_list (srb, d_left_counter); */
|
|
dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) "
|
|
"for remaining %i bytes:",
|
|
fc & 0x1f,
|
|
(srb->dcb->sync_period & WIDE_SYNC) ?
|
|
"words" : "bytes",
|
|
srb->total_xfer_length);
|
|
if (srb->dcb->sync_period & WIDE_SYNC)
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
|
|
CFG2_WIDEFIFO);
|
|
while (left_io) {
|
|
unsigned char *virt, *base = NULL;
|
|
unsigned long flags = 0;
|
|
size_t len = left_io;
|
|
size_t offset = srb->request_length - left_io;
|
|
|
|
local_irq_save(flags);
|
|
/* Assumption: it's inside one page as it's at most 4 bytes and
|
|
I just assume it's on a 4-byte boundary */
|
|
base = scsi_kmap_atomic_sg(scsi_sglist(srb->cmd),
|
|
srb->sg_count, &offset, &len);
|
|
virt = base + offset;
|
|
|
|
left_io -= len;
|
|
|
|
while (len) {
|
|
u8 byte;
|
|
byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
|
|
*virt++ = byte;
|
|
|
|
if (debug_enabled(DBG_PIO))
|
|
printk(" %02x", byte);
|
|
|
|
d_left_counter--;
|
|
sg_subtract_one(srb);
|
|
|
|
len--;
|
|
|
|
fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
|
|
|
|
if (fc == 0x40) {
|
|
left_io = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
WARN_ON((fc != 0x40) == !d_left_counter);
|
|
|
|
if (fc == 0x40 && (srb->dcb->sync_period & WIDE_SYNC)) {
|
|
/* Read the last byte ... */
|
|
if (srb->total_xfer_length > 0) {
|
|
u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
|
|
|
|
*virt++ = byte;
|
|
srb->total_xfer_length--;
|
|
if (debug_enabled(DBG_PIO))
|
|
printk(" %02x", byte);
|
|
}
|
|
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
|
|
}
|
|
|
|
scsi_kunmap_atomic_sg(base);
|
|
local_irq_restore(flags);
|
|
}
|
|
/*printk(" %08x", *(u32*)(bus_to_virt (addr))); */
|
|
/*srb->total_xfer_length = 0; */
|
|
if (debug_enabled(DBG_PIO))
|
|
printk("\n");
|
|
}
|
|
#endif /* DC395x_LASTPIO */
|
|
|
|
#if 0
|
|
/*
|
|
* KG: This was in DATAOUT. Does it also belong here?
|
|
* Nobody seems to know what counter and fifo_cnt count exactly ...
|
|
*/
|
|
if (!(scsi_status & SCSIXFERDONE)) {
|
|
/*
|
|
* when data transfer from DMA FIFO to SCSI FIFO
|
|
* if there was some data left in SCSI FIFO
|
|
*/
|
|
d_left_counter =
|
|
(u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
|
|
0x1F);
|
|
if (srb->dcb->sync_period & WIDE_SYNC)
|
|
d_left_counter <<= 1;
|
|
/*
|
|
* if WIDE scsi SCSI FIFOCNT unit is word !!!
|
|
* so need to *= 2
|
|
* KG: Seems to be correct ...
|
|
*/
|
|
}
|
|
#endif
|
|
/* KG: This should not be needed any more! */
|
|
if (d_left_counter == 0
|
|
|| (scsi_status & SCSIXFERCNT_2_ZERO)) {
|
|
#if 0
|
|
int ctr = 6000000;
|
|
u8 TempDMAstatus;
|
|
do {
|
|
TempDMAstatus =
|
|
DC395x_read8(acb, TRM_S1040_DMA_STATUS);
|
|
} while (!(TempDMAstatus & DMAXFERCOMP) && --ctr);
|
|
if (!ctr)
|
|
dprintkl(KERN_ERR,
|
|
"Deadlock in DataInPhase0 waiting for DMA!!\n");
|
|
srb->total_xfer_length = 0;
|
|
#endif
|
|
srb->total_xfer_length = d_left_counter;
|
|
} else { /* phase changed */
|
|
/*
|
|
* parsing the case:
|
|
* when a transfer not yet complete
|
|
* but be disconnected by target
|
|
* if transfer not yet complete
|
|
* there were some data residue in SCSI FIFO or
|
|
* SCSI transfer counter not empty
|
|
*/
|
|
sg_update_list(srb, d_left_counter);
|
|
}
|
|
}
|
|
/* KG: The target may decide to disconnect: Empty FIFO before! */
|
|
if ((*pscsi_status & PHASEMASK) != PH_DATA_IN) {
|
|
cleanup_after_transfer(acb, srb);
|
|
}
|
|
}
|
|
|
|
|
|
static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
dprintkdbg(DBG_0, "data_in_phase1: (0x%p) <%02i-%i>\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun);
|
|
data_io_transfer(acb, srb, XFERDATAIN);
|
|
}
|
|
|
|
|
|
static void data_io_transfer(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb, u16 io_dir)
|
|
{
|
|
struct DeviceCtlBlk *dcb = srb->dcb;
|
|
u8 bval;
|
|
dprintkdbg(DBG_0,
|
|
"data_io_transfer: (0x%p) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun,
|
|
((io_dir & DMACMD_DIR) ? 'r' : 'w'),
|
|
srb->total_xfer_length, srb->sg_index, srb->sg_count);
|
|
if (srb == acb->tmp_srb)
|
|
dprintkl(KERN_ERR, "data_io_transfer: Using tmp_srb!\n");
|
|
if (srb->sg_index >= srb->sg_count) {
|
|
/* can't happen? out of bounds error */
|
|
return;
|
|
}
|
|
|
|
if (srb->total_xfer_length > DC395x_LASTPIO) {
|
|
u8 dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
|
|
/*
|
|
* KG: What should we do: Use SCSI Cmd 0x90/0x92?
|
|
* Maybe, even ABORTXFER would be appropriate
|
|
*/
|
|
if (dma_status & XFERPENDING) {
|
|
dprintkl(KERN_DEBUG, "data_io_transfer: Xfer pending! "
|
|
"Expect trouble!\n");
|
|
dump_register_info(acb, dcb, srb);
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
|
|
}
|
|
/* clear_fifo(acb, "IO"); */
|
|
/*
|
|
* load what physical address of Scatter/Gather list table
|
|
* want to be transfer
|
|
*/
|
|
srb->state |= SRB_DATA_XFER;
|
|
DC395x_write32(acb, TRM_S1040_DMA_XHIGHADDR, 0);
|
|
if (scsi_sg_count(srb->cmd)) { /* with S/G */
|
|
io_dir |= DMACMD_SG;
|
|
DC395x_write32(acb, TRM_S1040_DMA_XLOWADDR,
|
|
srb->sg_bus_addr +
|
|
sizeof(struct SGentry) *
|
|
srb->sg_index);
|
|
/* load how many bytes in the sg list table */
|
|
DC395x_write32(acb, TRM_S1040_DMA_XCNT,
|
|
((u32)(srb->sg_count -
|
|
srb->sg_index) << 3));
|
|
} else { /* without S/G */
|
|
io_dir &= ~DMACMD_SG;
|
|
DC395x_write32(acb, TRM_S1040_DMA_XLOWADDR,
|
|
srb->segment_x[0].address);
|
|
DC395x_write32(acb, TRM_S1040_DMA_XCNT,
|
|
srb->segment_x[0].length);
|
|
}
|
|
/* load total transfer length (24bits) max value 16Mbyte */
|
|
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER,
|
|
srb->total_xfer_length);
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
if (io_dir & DMACMD_DIR) { /* read */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
|
|
SCMD_DMA_IN);
|
|
DC395x_write16(acb, TRM_S1040_DMA_COMMAND, io_dir);
|
|
} else {
|
|
DC395x_write16(acb, TRM_S1040_DMA_COMMAND, io_dir);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
|
|
SCMD_DMA_OUT);
|
|
}
|
|
|
|
}
|
|
#if DC395x_LASTPIO
|
|
else if (srb->total_xfer_length > 0) { /* The last four bytes: Do PIO */
|
|
/*
|
|
* load what physical address of Scatter/Gather list table
|
|
* want to be transfer
|
|
*/
|
|
srb->state |= SRB_DATA_XFER;
|
|
/* load total transfer length (24bits) max value 16Mbyte */
|
|
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER,
|
|
srb->total_xfer_length);
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
if (io_dir & DMACMD_DIR) { /* read */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
|
|
SCMD_FIFO_IN);
|
|
} else { /* write */
|
|
int ln = srb->total_xfer_length;
|
|
size_t left_io = srb->total_xfer_length;
|
|
|
|
if (srb->dcb->sync_period & WIDE_SYNC)
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
|
|
CFG2_WIDEFIFO);
|
|
|
|
while (left_io) {
|
|
unsigned char *virt, *base = NULL;
|
|
unsigned long flags = 0;
|
|
size_t len = left_io;
|
|
size_t offset = srb->request_length - left_io;
|
|
|
|
local_irq_save(flags);
|
|
/* Again, max 4 bytes */
|
|
base = scsi_kmap_atomic_sg(scsi_sglist(srb->cmd),
|
|
srb->sg_count, &offset, &len);
|
|
virt = base + offset;
|
|
|
|
left_io -= len;
|
|
|
|
while (len--) {
|
|
if (debug_enabled(DBG_PIO))
|
|
printk(" %02x", *virt);
|
|
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *virt++);
|
|
|
|
sg_subtract_one(srb);
|
|
}
|
|
|
|
scsi_kunmap_atomic_sg(base);
|
|
local_irq_restore(flags);
|
|
}
|
|
if (srb->dcb->sync_period & WIDE_SYNC) {
|
|
if (ln % 2) {
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
|
|
if (debug_enabled(DBG_PIO))
|
|
printk(" |00");
|
|
}
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
|
|
}
|
|
/*DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, ln); */
|
|
if (debug_enabled(DBG_PIO))
|
|
printk("\n");
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
|
|
SCMD_FIFO_OUT);
|
|
}
|
|
}
|
|
#endif /* DC395x_LASTPIO */
|
|
else { /* xfer pad */
|
|
u8 data = 0, data2 = 0;
|
|
if (srb->sg_count) {
|
|
srb->adapter_status = H_OVER_UNDER_RUN;
|
|
srb->status |= OVER_RUN;
|
|
}
|
|
/*
|
|
* KG: despite the fact that we are using 16 bits I/O ops
|
|
* the SCSI FIFO is only 8 bits according to the docs
|
|
* (we can set bit 1 in 0x8f to serialize FIFO access ...)
|
|
*/
|
|
if (dcb->sync_period & WIDE_SYNC) {
|
|
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 2);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
|
|
CFG2_WIDEFIFO);
|
|
if (io_dir & DMACMD_DIR) {
|
|
data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
|
|
data2 = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
|
|
} else {
|
|
/* Danger, Robinson: If you find KGs
|
|
* scattered over the wide disk, the driver
|
|
* or chip is to blame :-( */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'K');
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'G');
|
|
}
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
|
|
} else {
|
|
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
|
|
/* Danger, Robinson: If you find a collection of Ks on your disk
|
|
* something broke :-( */
|
|
if (io_dir & DMACMD_DIR)
|
|
data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
|
|
else
|
|
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'K');
|
|
}
|
|
srb->state |= SRB_XFERPAD;
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
/* SCSI command */
|
|
bval = (io_dir & DMACMD_DIR) ? SCMD_FIFO_IN : SCMD_FIFO_OUT;
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, bval);
|
|
}
|
|
}
|
|
|
|
|
|
static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
dprintkdbg(DBG_0, "status_phase0: (0x%p) <%02i-%i>\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun);
|
|
srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
|
|
srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); /* get message */
|
|
srb->state = SRB_COMPLETED;
|
|
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
|
|
}
|
|
|
|
|
|
static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
dprintkdbg(DBG_0, "status_phase1: (0x%p) <%02i-%i>\n",
|
|
srb->cmd, srb->cmd->device->id, (u8)srb->cmd->device->lun);
|
|
srb->state = SRB_STATUS;
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
|
|
}
|
|
|
|
|
|
/* Check if the message is complete */
|
|
static inline u8 msgin_completed(u8 * msgbuf, u32 len)
|
|
{
|
|
if (*msgbuf == EXTENDED_MESSAGE) {
|
|
if (len < 2)
|
|
return 0;
|
|
if (len < msgbuf[1] + 2)
|
|
return 0;
|
|
} else if (*msgbuf >= 0x20 && *msgbuf <= 0x2f) /* two byte messages */
|
|
if (len < 2)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
/* reject_msg */
|
|
static inline void msgin_reject(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
srb->msgout_buf[0] = MESSAGE_REJECT;
|
|
srb->msg_count = 1;
|
|
DC395x_ENABLE_MSGOUT;
|
|
srb->state &= ~SRB_MSGIN;
|
|
srb->state |= SRB_MSGOUT;
|
|
dprintkl(KERN_INFO, "msgin_reject: 0x%02x <%02i-%i>\n",
|
|
srb->msgin_buf[0],
|
|
srb->dcb->target_id, srb->dcb->target_lun);
|
|
}
|
|
|
|
|
|
static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
|
|
struct DeviceCtlBlk *dcb, u8 tag)
|
|
{
|
|
struct ScsiReqBlk *srb = NULL;
|
|
struct ScsiReqBlk *i;
|
|
dprintkdbg(DBG_0, "msgin_qtag: (0x%p) tag=%i srb=%p\n",
|
|
srb->cmd, tag, srb);
|
|
|
|
if (!(dcb->tag_mask & (1 << tag)))
|
|
dprintkl(KERN_DEBUG,
|
|
"msgin_qtag: tag_mask=0x%08x does not reserve tag %i!\n",
|
|
dcb->tag_mask, tag);
|
|
|
|
if (list_empty(&dcb->srb_going_list))
|
|
goto mingx0;
|
|
list_for_each_entry(i, &dcb->srb_going_list, list) {
|
|
if (i->tag_number == tag) {
|
|
srb = i;
|
|
break;
|
|
}
|
|
}
|
|
if (!srb)
|
|
goto mingx0;
|
|
|
|
dprintkdbg(DBG_0, "msgin_qtag: (0x%p) <%02i-%i>\n",
|
|
srb->cmd, srb->dcb->target_id, srb->dcb->target_lun);
|
|
if (dcb->flag & ABORT_DEV_) {
|
|
/*srb->state = SRB_ABORT_SENT; */
|
|
enable_msgout_abort(acb, srb);
|
|
}
|
|
|
|
if (!(srb->state & SRB_DISCONNECT))
|
|
goto mingx0;
|
|
|
|
memcpy(srb->msgin_buf, dcb->active_srb->msgin_buf, acb->msg_len);
|
|
srb->state |= dcb->active_srb->state;
|
|
srb->state |= SRB_DATA_XFER;
|
|
dcb->active_srb = srb;
|
|
/* How can we make the DORS happy? */
|
|
return srb;
|
|
|
|
mingx0:
|
|
srb = acb->tmp_srb;
|
|
srb->state = SRB_UNEXPECT_RESEL;
|
|
dcb->active_srb = srb;
|
|
srb->msgout_buf[0] = MSG_ABORT_TAG;
|
|
srb->msg_count = 1;
|
|
DC395x_ENABLE_MSGOUT;
|
|
dprintkl(KERN_DEBUG, "msgin_qtag: Unknown tag %i - abort\n", tag);
|
|
return srb;
|
|
}
|
|
|
|
|
|
static inline void reprogram_regs(struct AdapterCtlBlk *acb,
|
|
struct DeviceCtlBlk *dcb)
|
|
{
|
|
DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset);
|
|
set_xfer_rate(acb, dcb);
|
|
}
|
|
|
|
|
|
/* set async transfer mode */
|
|
static void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
|
|
{
|
|
struct DeviceCtlBlk *dcb = srb->dcb;
|
|
dprintkl(KERN_DEBUG, "msgin_set_async: No sync transfers <%02i-%i>\n",
|
|
dcb->target_id, dcb->target_lun);
|
|
|
|
dcb->sync_mode &= ~(SYNC_NEGO_ENABLE);
|
|
dcb->sync_mode |= SYNC_NEGO_DONE;
|
|
/*dcb->sync_period &= 0; */
|
|
dcb->sync_offset = 0;
|
|
dcb->min_nego_period = 200 >> 2; /* 200ns <=> 5 MHz */
|
|
srb->state &= ~SRB_DO_SYNC_NEGO;
|
|
reprogram_regs(acb, dcb);
|
|
if ((dcb->sync_mode & WIDE_NEGO_ENABLE)
|
|
&& !(dcb->sync_mode & WIDE_NEGO_DONE)) {
|
|
build_wdtr(acb, dcb, srb);
|
|
DC395x_ENABLE_MSGOUT;
|
|
dprintkdbg(DBG_0, "msgin_set_async(rej): Try WDTR anyway\n");
|
|
}
|
|
}
|
|
|
|
|
|
/* set sync transfer mode */
|
|
static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
|
|
{
|
|
struct DeviceCtlBlk *dcb = srb->dcb;
|
|
u8 bval;
|
|
int fact;
|
|
dprintkdbg(DBG_1, "msgin_set_sync: <%02i> Sync: %ins "
|
|
"(%02i.%01i MHz) Offset %i\n",
|
|
dcb->target_id, srb->msgin_buf[3] << 2,
|
|
(250 / srb->msgin_buf[3]),
|
|
((250 % srb->msgin_buf[3]) * 10) / srb->msgin_buf[3],
|
|
srb->msgin_buf[4]);
|
|
|
|
if (srb->msgin_buf[4] > 15)
|
|
srb->msgin_buf[4] = 15;
|
|
if (!(dcb->dev_mode & NTC_DO_SYNC_NEGO))
|
|
dcb->sync_offset = 0;
|
|
else if (dcb->sync_offset == 0)
|
|
dcb->sync_offset = srb->msgin_buf[4];
|
|
if (srb->msgin_buf[4] > dcb->sync_offset)
|
|
srb->msgin_buf[4] = dcb->sync_offset;
|
|
else
|
|
dcb->sync_offset = srb->msgin_buf[4];
|
|
bval = 0;
|
|
while (bval < 7 && (srb->msgin_buf[3] > clock_period[bval]
|
|
|| dcb->min_nego_period >
|
|
clock_period[bval]))
|
|
bval++;
|
|
if (srb->msgin_buf[3] < clock_period[bval])
|
|
dprintkl(KERN_INFO,
|
|
"msgin_set_sync: Increase sync nego period to %ins\n",
|
|
clock_period[bval] << 2);
|
|
srb->msgin_buf[3] = clock_period[bval];
|
|
dcb->sync_period &= 0xf0;
|
|
dcb->sync_period |= ALT_SYNC | bval;
|
|
dcb->min_nego_period = srb->msgin_buf[3];
|
|
|
|
if (dcb->sync_period & WIDE_SYNC)
|
|
fact = 500;
|
|
else
|
|
fact = 250;
|
|
|
|
dprintkl(KERN_INFO,
|
|
"Target %02i: %s Sync: %ins Offset %i (%02i.%01i MB/s)\n",
|
|
dcb->target_id, (fact == 500) ? "Wide16" : "",
|
|
dcb->min_nego_period << 2, dcb->sync_offset,
|
|
(fact / dcb->min_nego_period),
|
|
((fact % dcb->min_nego_period) * 10 +
|
|
dcb->min_nego_period / 2) / dcb->min_nego_period);
|
|
|
|
if (!(srb->state & SRB_DO_SYNC_NEGO)) {
|
|
/* Reply with corrected SDTR Message */
|
|
dprintkl(KERN_DEBUG, "msgin_set_sync: answer w/%ins %i\n",
|
|
srb->msgin_buf[3] << 2, srb->msgin_buf[4]);
|
|
|
|
memcpy(srb->msgout_buf, srb->msgin_buf, 5);
|
|
srb->msg_count = 5;
|
|
DC395x_ENABLE_MSGOUT;
|
|
dcb->sync_mode |= SYNC_NEGO_DONE;
|
|
} else {
|
|
if ((dcb->sync_mode & WIDE_NEGO_ENABLE)
|
|
&& !(dcb->sync_mode & WIDE_NEGO_DONE)) {
|
|
build_wdtr(acb, dcb, srb);
|
|
DC395x_ENABLE_MSGOUT;
|
|
dprintkdbg(DBG_0, "msgin_set_sync: Also try WDTR\n");
|
|
}
|
|
}
|
|
srb->state &= ~SRB_DO_SYNC_NEGO;
|
|
dcb->sync_mode |= SYNC_NEGO_DONE | SYNC_NEGO_ENABLE;
|
|
|
|
reprogram_regs(acb, dcb);
|
|
}
|
|
|
|
|
|
static inline void msgin_set_nowide(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
struct DeviceCtlBlk *dcb = srb->dcb;
|
|
dprintkdbg(DBG_1, "msgin_set_nowide: <%02i>\n", dcb->target_id);
|
|
|
|
dcb->sync_period &= ~WIDE_SYNC;
|
|
dcb->sync_mode &= ~(WIDE_NEGO_ENABLE);
|
|
dcb->sync_mode |= WIDE_NEGO_DONE;
|
|
srb->state &= ~SRB_DO_WIDE_NEGO;
|
|
reprogram_regs(acb, dcb);
|
|
if ((dcb->sync_mode & SYNC_NEGO_ENABLE)
|
|
&& !(dcb->sync_mode & SYNC_NEGO_DONE)) {
|
|
build_sdtr(acb, dcb, srb);
|
|
DC395x_ENABLE_MSGOUT;
|
|
dprintkdbg(DBG_0, "msgin_set_nowide: Rejected. Try SDTR anyway\n");
|
|
}
|
|
}
|
|
|
|
static void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
|
|
{
|
|
struct DeviceCtlBlk *dcb = srb->dcb;
|
|
u8 wide = (dcb->dev_mode & NTC_DO_WIDE_NEGO
|
|
&& acb->config & HCC_WIDE_CARD) ? 1 : 0;
|
|
dprintkdbg(DBG_1, "msgin_set_wide: <%02i>\n", dcb->target_id);
|
|
|
|
if (srb->msgin_buf[3] > wide)
|
|
srb->msgin_buf[3] = wide;
|
|
/* Completed */
|
|
if (!(srb->state & SRB_DO_WIDE_NEGO)) {
|
|
dprintkl(KERN_DEBUG,
|
|
"msgin_set_wide: Wide nego initiated <%02i>\n",
|
|
dcb->target_id);
|
|
memcpy(srb->msgout_buf, srb->msgin_buf, 4);
|
|
srb->msg_count = 4;
|
|
srb->state |= SRB_DO_WIDE_NEGO;
|
|
DC395x_ENABLE_MSGOUT;
|
|
}
|
|
|
|
dcb->sync_mode |= (WIDE_NEGO_ENABLE | WIDE_NEGO_DONE);
|
|
if (srb->msgin_buf[3] > 0)
|
|
dcb->sync_period |= WIDE_SYNC;
|
|
else
|
|
dcb->sync_period &= ~WIDE_SYNC;
|
|
srb->state &= ~SRB_DO_WIDE_NEGO;
|
|
/*dcb->sync_mode &= ~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE); */
|
|
dprintkdbg(DBG_1,
|
|
"msgin_set_wide: Wide (%i bit) negotiated <%02i>\n",
|
|
(8 << srb->msgin_buf[3]), dcb->target_id);
|
|
reprogram_regs(acb, dcb);
|
|
if ((dcb->sync_mode & SYNC_NEGO_ENABLE)
|
|
&& !(dcb->sync_mode & SYNC_NEGO_DONE)) {
|
|
build_sdtr(acb, dcb, srb);
|
|
DC395x_ENABLE_MSGOUT;
|
|
dprintkdbg(DBG_0, "msgin_set_wide: Also try SDTR.\n");
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* extended message codes:
|
|
*
|
|
* code description
|
|
*
|
|
* 02h Reserved
|
|
* 00h MODIFY DATA POINTER
|
|
* 01h SYNCHRONOUS DATA TRANSFER REQUEST
|
|
* 03h WIDE DATA TRANSFER REQUEST
|
|
* 04h - 7Fh Reserved
|
|
* 80h - FFh Vendor specific
|
|
*/
|
|
static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
struct DeviceCtlBlk *dcb = acb->active_dcb;
|
|
dprintkdbg(DBG_0, "msgin_phase0: (0x%p)\n", srb->cmd);
|
|
|
|
srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
|
|
if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
|
|
/* Now eval the msg */
|
|
switch (srb->msgin_buf[0]) {
|
|
case DISCONNECT:
|
|
srb->state = SRB_DISCONNECT;
|
|
break;
|
|
|
|
case SIMPLE_QUEUE_TAG:
|
|
case HEAD_OF_QUEUE_TAG:
|
|
case ORDERED_QUEUE_TAG:
|
|
srb =
|
|
msgin_qtag(acb, dcb,
|
|
srb->msgin_buf[1]);
|
|
break;
|
|
|
|
case MESSAGE_REJECT:
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
|
|
DO_CLRATN | DO_DATALATCH);
|
|
/* A sync nego message was rejected ! */
|
|
if (srb->state & SRB_DO_SYNC_NEGO) {
|
|
msgin_set_async(acb, srb);
|
|
break;
|
|
}
|
|
/* A wide nego message was rejected ! */
|
|
if (srb->state & SRB_DO_WIDE_NEGO) {
|
|
msgin_set_nowide(acb, srb);
|
|
break;
|
|
}
|
|
enable_msgout_abort(acb, srb);
|
|
/*srb->state |= SRB_ABORT_SENT */
|
|
break;
|
|
|
|
case EXTENDED_MESSAGE:
|
|
/* SDTR */
|
|
if (srb->msgin_buf[1] == 3
|
|
&& srb->msgin_buf[2] == EXTENDED_SDTR) {
|
|
msgin_set_sync(acb, srb);
|
|
break;
|
|
}
|
|
/* WDTR */
|
|
if (srb->msgin_buf[1] == 2
|
|
&& srb->msgin_buf[2] == EXTENDED_WDTR
|
|
&& srb->msgin_buf[3] <= 2) { /* sanity check ... */
|
|
msgin_set_wide(acb, srb);
|
|
break;
|
|
}
|
|
msgin_reject(acb, srb);
|
|
break;
|
|
|
|
case MSG_IGNOREWIDE:
|
|
/* Discard wide residual */
|
|
dprintkdbg(DBG_0, "msgin_phase0: Ignore Wide Residual!\n");
|
|
break;
|
|
|
|
case COMMAND_COMPLETE:
|
|
/* nothing has to be done */
|
|
break;
|
|
|
|
case SAVE_POINTERS:
|
|
/*
|
|
* SAVE POINTER may be ignored as we have the struct
|
|
* ScsiReqBlk* associated with the scsi command.
|
|
*/
|
|
dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
|
|
"SAVE POINTER rem=%i Ignore\n",
|
|
srb->cmd, srb->total_xfer_length);
|
|
break;
|
|
|
|
case RESTORE_POINTERS:
|
|
dprintkdbg(DBG_0, "msgin_phase0: RESTORE POINTER. Ignore\n");
|
|
break;
|
|
|
|
case ABORT:
|
|
dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
|
|
"<%02i-%i> ABORT msg\n",
|
|
srb->cmd, dcb->target_id,
|
|
dcb->target_lun);
|
|
dcb->flag |= ABORT_DEV_;
|
|
enable_msgout_abort(acb, srb);
|
|
break;
|
|
|
|
default:
|
|
/* reject unknown messages */
|
|
if (srb->msgin_buf[0] & IDENTIFY_BASE) {
|
|
dprintkdbg(DBG_0, "msgin_phase0: Identify msg\n");
|
|
srb->msg_count = 1;
|
|
srb->msgout_buf[0] = dcb->identify_msg;
|
|
DC395x_ENABLE_MSGOUT;
|
|
srb->state |= SRB_MSGOUT;
|
|
/*break; */
|
|
}
|
|
msgin_reject(acb, srb);
|
|
}
|
|
|
|
/* Clear counter and MsgIn state */
|
|
srb->state &= ~SRB_MSGIN;
|
|
acb->msg_len = 0;
|
|
}
|
|
*pscsi_status = PH_BUS_FREE;
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important ... you know! */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
|
|
}
|
|
|
|
|
|
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
dprintkdbg(DBG_0, "msgin_phase1: (0x%p)\n", srb->cmd);
|
|
clear_fifo(acb, "msgin_phase1");
|
|
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
|
|
if (!(srb->state & SRB_MSGIN)) {
|
|
srb->state &= ~SRB_DISCONNECT;
|
|
srb->state |= SRB_MSGIN;
|
|
}
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
/* SCSI command */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_IN);
|
|
}
|
|
|
|
|
|
static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
}
|
|
|
|
|
|
static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|
|
u16 *pscsi_status)
|
|
{
|
|
}
|
|
|
|
|
|
static void set_xfer_rate(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
|
|
{
|
|
struct DeviceCtlBlk *i;
|
|
|
|
/* set all lun device's period, offset */
|
|
if (dcb->identify_msg & 0x07)
|
|
return;
|
|
|
|
if (acb->scan_devices) {
|
|
current_sync_offset = dcb->sync_offset;
|
|
return;
|
|
}
|
|
|
|
list_for_each_entry(i, &acb->dcb_list, list)
|
|
if (i->target_id == dcb->target_id) {
|
|
i->sync_period = dcb->sync_period;
|
|
i->sync_offset = dcb->sync_offset;
|
|
i->sync_mode = dcb->sync_mode;
|
|
i->min_nego_period = dcb->min_nego_period;
|
|
}
|
|
}
|
|
|
|
|
|
static void disconnect(struct AdapterCtlBlk *acb)
|
|
{
|
|
struct DeviceCtlBlk *dcb = acb->active_dcb;
|
|
struct ScsiReqBlk *srb;
|
|
|
|
if (!dcb) {
|
|
dprintkl(KERN_ERR, "disconnect: No such device\n");
|
|
udelay(500);
|
|
/* Suspend queue for a while */
|
|
acb->last_reset =
|
|
jiffies + HZ / 2 +
|
|
HZ * acb->eeprom.delay_time;
|
|
clear_fifo(acb, "disconnectEx");
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
|
|
return;
|
|
}
|
|
srb = dcb->active_srb;
|
|
acb->active_dcb = NULL;
|
|
dprintkdbg(DBG_0, "disconnect: (0x%p)\n", srb->cmd);
|
|
|
|
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
|
|
clear_fifo(acb, "disconnect");
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
|
|
if (srb->state & SRB_UNEXPECT_RESEL) {
|
|
dprintkl(KERN_ERR,
|
|
"disconnect: Unexpected reselection <%02i-%i>\n",
|
|
dcb->target_id, dcb->target_lun);
|
|
srb->state = 0;
|
|
waiting_process_next(acb);
|
|
} else if (srb->state & SRB_ABORT_SENT) {
|
|
dcb->flag &= ~ABORT_DEV_;
|
|
acb->last_reset = jiffies + HZ / 2 + 1;
|
|
dprintkl(KERN_ERR, "disconnect: SRB_ABORT_SENT\n");
|
|
doing_srb_done(acb, DID_ABORT, srb->cmd, 1);
|
|
waiting_process_next(acb);
|
|
} else {
|
|
if ((srb->state & (SRB_START_ + SRB_MSGOUT))
|
|
|| !(srb->
|
|
state & (SRB_DISCONNECT + SRB_COMPLETED))) {
|
|
/*
|
|
* Selection time out
|
|
* SRB_START_ || SRB_MSGOUT || (!SRB_DISCONNECT && !SRB_COMPLETED)
|
|
*/
|
|
/* Unexp. Disc / Sel Timeout */
|
|
if (srb->state != SRB_START_
|
|
&& srb->state != SRB_MSGOUT) {
|
|
srb->state = SRB_READY;
|
|
dprintkl(KERN_DEBUG,
|
|
"disconnect: (0x%p) Unexpected\n",
|
|
srb->cmd);
|
|
srb->target_status = SCSI_STAT_SEL_TIMEOUT;
|
|
goto disc1;
|
|
} else {
|
|
/* Normal selection timeout */
|
|
dprintkdbg(DBG_KG, "disconnect: (0x%p) "
|
|
"<%02i-%i> SelTO\n", srb->cmd,
|
|
dcb->target_id, dcb->target_lun);
|
|
if (srb->retry_count++ > DC395x_MAX_RETRIES
|
|
|| acb->scan_devices) {
|
|
srb->target_status =
|
|
SCSI_STAT_SEL_TIMEOUT;
|
|
goto disc1;
|
|
}
|
|
free_tag(dcb, srb);
|
|
srb_going_to_waiting_move(dcb, srb);
|
|
dprintkdbg(DBG_KG,
|
|
"disconnect: (0x%p) Retry\n",
|
|
srb->cmd);
|
|
waiting_set_timer(acb, HZ / 20);
|
|
}
|
|
} else if (srb->state & SRB_DISCONNECT) {
|
|
u8 bval = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
|
|
/*
|
|
* SRB_DISCONNECT (This is what we expect!)
|
|
*/
|
|
if (bval & 0x40) {
|
|
dprintkdbg(DBG_0, "disconnect: SCSI bus stat "
|
|
" 0x%02x: ACK set! Other controllers?\n",
|
|
bval);
|
|
/* It could come from another initiator, therefore don't do much ! */
|
|
} else
|
|
waiting_process_next(acb);
|
|
} else if (srb->state & SRB_COMPLETED) {
|
|
disc1:
|
|
/*
|
|
** SRB_COMPLETED
|
|
*/
|
|
free_tag(dcb, srb);
|
|
dcb->active_srb = NULL;
|
|
srb->state = SRB_FREE;
|
|
srb_done(acb, dcb, srb);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void reselect(struct AdapterCtlBlk *acb)
|
|
{
|
|
struct DeviceCtlBlk *dcb = acb->active_dcb;
|
|
struct ScsiReqBlk *srb = NULL;
|
|
u16 rsel_tar_lun_id;
|
|
u8 id, lun;
|
|
u8 arblostflag = 0;
|
|
dprintkdbg(DBG_0, "reselect: acb=%p\n", acb);
|
|
|
|
clear_fifo(acb, "reselect");
|
|
/*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
|
|
/* Read Reselected Target ID and LUN */
|
|
rsel_tar_lun_id = DC395x_read16(acb, TRM_S1040_SCSI_TARGETID);
|
|
if (dcb) { /* Arbitration lost but Reselection win */
|
|
srb = dcb->active_srb;
|
|
if (!srb) {
|
|
dprintkl(KERN_DEBUG, "reselect: Arb lost Resel won, "
|
|
"but active_srb == NULL\n");
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
return;
|
|
}
|
|
/* Why the if ? */
|
|
if (!acb->scan_devices) {
|
|
dprintkdbg(DBG_KG, "reselect: (0x%p) <%02i-%i> "
|
|
"Arb lost but Resel win rsel=%i stat=0x%04x\n",
|
|
srb->cmd, dcb->target_id,
|
|
dcb->target_lun, rsel_tar_lun_id,
|
|
DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
|
|
arblostflag = 1;
|
|
/*srb->state |= SRB_DISCONNECT; */
|
|
|
|
srb->state = SRB_READY;
|
|
free_tag(dcb, srb);
|
|
srb_going_to_waiting_move(dcb, srb);
|
|
waiting_set_timer(acb, HZ / 20);
|
|
|
|
/* return; */
|
|
}
|
|
}
|
|
/* Read Reselected Target Id and LUN */
|
|
if (!(rsel_tar_lun_id & (IDENTIFY_BASE << 8)))
|
|
dprintkl(KERN_DEBUG, "reselect: Expects identify msg. "
|
|
"Got %i!\n", rsel_tar_lun_id);
|
|
id = rsel_tar_lun_id & 0xff;
|
|
lun = (rsel_tar_lun_id >> 8) & 7;
|
|
dcb = find_dcb(acb, id, lun);
|
|
if (!dcb) {
|
|
dprintkl(KERN_ERR, "reselect: From non existent device "
|
|
"<%02i-%i>\n", id, lun);
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
return;
|
|
}
|
|
acb->active_dcb = dcb;
|
|
|
|
if (!(dcb->dev_mode & NTC_DO_DISCONNECT))
|
|
dprintkl(KERN_DEBUG, "reselect: in spite of forbidden "
|
|
"disconnection? <%02i-%i>\n",
|
|
dcb->target_id, dcb->target_lun);
|
|
|
|
if (dcb->sync_mode & EN_TAG_QUEUEING /*&& !arblostflag */) {
|
|
srb = acb->tmp_srb;
|
|
dcb->active_srb = srb;
|
|
} else {
|
|
/* There can be only one! */
|
|
srb = dcb->active_srb;
|
|
if (!srb || !(srb->state & SRB_DISCONNECT)) {
|
|
/*
|
|
* abort command
|
|
*/
|
|
dprintkl(KERN_DEBUG,
|
|
"reselect: w/o disconnected cmds <%02i-%i>\n",
|
|
dcb->target_id, dcb->target_lun);
|
|
srb = acb->tmp_srb;
|
|
srb->state = SRB_UNEXPECT_RESEL;
|
|
dcb->active_srb = srb;
|
|
enable_msgout_abort(acb, srb);
|
|
} else {
|
|
if (dcb->flag & ABORT_DEV_) {
|
|
/*srb->state = SRB_ABORT_SENT; */
|
|
enable_msgout_abort(acb, srb);
|
|
} else
|
|
srb->state = SRB_DATA_XFER;
|
|
|
|
}
|
|
}
|
|
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
|
|
|
|
/* Program HA ID, target ID, period and offset */
|
|
dprintkdbg(DBG_0, "reselect: select <%i>\n", dcb->target_id);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id); /* host ID */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id); /* target ID */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset); /* offset */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period); /* sync period, wide */
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
|
|
/* SCSI command */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
|
|
}
|
|
|
|
|
|
static inline u8 tagq_blacklist(char *name)
|
|
{
|
|
#ifndef DC395x_NO_TAGQ
|
|
#if 0
|
|
u8 i;
|
|
for (i = 0; i < BADDEVCNT; i++)
|
|
if (memcmp(name, DC395x_baddevname1[i], 28) == 0)
|
|
return 1;
|
|
#endif
|
|
return 0;
|
|
#else
|
|
return 1;
|
|
#endif
|
|
}
|
|
|
|
|
|
static void disc_tagq_set(struct DeviceCtlBlk *dcb, struct ScsiInqData *ptr)
|
|
{
|
|
/* Check for SCSI format (ANSI and Response data format) */
|
|
if ((ptr->Vers & 0x07) >= 2 || (ptr->RDF & 0x0F) == 2) {
|
|
if ((ptr->Flags & SCSI_INQ_CMDQUEUE)
|
|
&& (dcb->dev_mode & NTC_DO_TAG_QUEUEING) &&
|
|
/*(dcb->dev_mode & NTC_DO_DISCONNECT) */
|
|
/* ((dcb->dev_type == TYPE_DISK)
|
|
|| (dcb->dev_type == TYPE_MOD)) && */
|
|
!tagq_blacklist(((char *)ptr) + 8)) {
|
|
if (dcb->max_command == 1)
|
|
dcb->max_command =
|
|
dcb->acb->tag_max_num;
|
|
dcb->sync_mode |= EN_TAG_QUEUEING;
|
|
/*dcb->tag_mask = 0; */
|
|
} else
|
|
dcb->max_command = 1;
|
|
}
|
|
}
|
|
|
|
|
|
static void add_dev(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiInqData *ptr)
|
|
{
|
|
u8 bval1 = ptr->DevType & SCSI_DEVTYPE;
|
|
dcb->dev_type = bval1;
|
|
/* if (bval1 == TYPE_DISK || bval1 == TYPE_MOD) */
|
|
disc_tagq_set(dcb, ptr);
|
|
}
|
|
|
|
|
|
/* unmap mapped pci regions from SRB */
|
|
static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
|
|
{
|
|
struct scsi_cmnd *cmd = srb->cmd;
|
|
enum dma_data_direction dir = cmd->sc_data_direction;
|
|
|
|
if (scsi_sg_count(cmd) && dir != PCI_DMA_NONE) {
|
|
/* unmap DC395x SG list */
|
|
dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
|
|
srb->sg_bus_addr, SEGMENTX_LEN);
|
|
pci_unmap_single(acb->dev, srb->sg_bus_addr,
|
|
SEGMENTX_LEN,
|
|
PCI_DMA_TODEVICE);
|
|
dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
|
|
scsi_sg_count(cmd), scsi_bufflen(cmd));
|
|
/* unmap the sg segments */
|
|
scsi_dma_unmap(cmd);
|
|
}
|
|
}
|
|
|
|
|
|
/* unmap mapped pci sense buffer from SRB */
|
|
static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
if (!(srb->flag & AUTO_REQSENSE))
|
|
return;
|
|
/* Unmap sense buffer */
|
|
dprintkdbg(DBG_SG, "pci_unmap_srb_sense: buffer=%08x\n",
|
|
srb->segment_x[0].address);
|
|
pci_unmap_single(acb->dev, srb->segment_x[0].address,
|
|
srb->segment_x[0].length, PCI_DMA_FROMDEVICE);
|
|
/* Restore SG stuff */
|
|
srb->total_xfer_length = srb->xferred;
|
|
srb->segment_x[0].address =
|
|
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
|
|
srb->segment_x[0].length =
|
|
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length;
|
|
}
|
|
|
|
|
|
/*
|
|
* Complete execution of a SCSI command
|
|
* Signal completion to the generic SCSI driver
|
|
*/
|
|
static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
u8 tempcnt, status;
|
|
struct scsi_cmnd *cmd = srb->cmd;
|
|
enum dma_data_direction dir = cmd->sc_data_direction;
|
|
int ckc_only = 1;
|
|
|
|
dprintkdbg(DBG_1, "srb_done: (0x%p) <%02i-%i>\n", srb->cmd,
|
|
srb->cmd->device->id, (u8)srb->cmd->device->lun);
|
|
dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p\n",
|
|
srb, scsi_sg_count(cmd), srb->sg_index, srb->sg_count,
|
|
scsi_sgtalbe(cmd));
|
|
status = srb->target_status;
|
|
if (srb->flag & AUTO_REQSENSE) {
|
|
dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE1\n");
|
|
pci_unmap_srb_sense(acb, srb);
|
|
/*
|
|
** target status..........................
|
|
*/
|
|
srb->flag &= ~AUTO_REQSENSE;
|
|
srb->adapter_status = 0;
|
|
srb->target_status = CHECK_CONDITION << 1;
|
|
if (debug_enabled(DBG_1)) {
|
|
switch (cmd->sense_buffer[2] & 0x0f) {
|
|
case NOT_READY:
|
|
dprintkl(KERN_DEBUG,
|
|
"ReqSense: NOT_READY cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
|
|
cmd->cmnd[0], dcb->target_id,
|
|
dcb->target_lun, status, acb->scan_devices);
|
|
break;
|
|
case UNIT_ATTENTION:
|
|
dprintkl(KERN_DEBUG,
|
|
"ReqSense: UNIT_ATTENTION cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
|
|
cmd->cmnd[0], dcb->target_id,
|
|
dcb->target_lun, status, acb->scan_devices);
|
|
break;
|
|
case ILLEGAL_REQUEST:
|
|
dprintkl(KERN_DEBUG,
|
|
"ReqSense: ILLEGAL_REQUEST cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
|
|
cmd->cmnd[0], dcb->target_id,
|
|
dcb->target_lun, status, acb->scan_devices);
|
|
break;
|
|
case MEDIUM_ERROR:
|
|
dprintkl(KERN_DEBUG,
|
|
"ReqSense: MEDIUM_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
|
|
cmd->cmnd[0], dcb->target_id,
|
|
dcb->target_lun, status, acb->scan_devices);
|
|
break;
|
|
case HARDWARE_ERROR:
|
|
dprintkl(KERN_DEBUG,
|
|
"ReqSense: HARDWARE_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
|
|
cmd->cmnd[0], dcb->target_id,
|
|
dcb->target_lun, status, acb->scan_devices);
|
|
break;
|
|
}
|
|
if (cmd->sense_buffer[7] >= 6)
|
|
printk("sense=0x%02x ASC=0x%02x ASCQ=0x%02x "
|
|
"(0x%08x 0x%08x)\n",
|
|
cmd->sense_buffer[2], cmd->sense_buffer[12],
|
|
cmd->sense_buffer[13],
|
|
*((unsigned int *)(cmd->sense_buffer + 3)),
|
|
*((unsigned int *)(cmd->sense_buffer + 8)));
|
|
else
|
|
printk("sense=0x%02x No ASC/ASCQ (0x%08x)\n",
|
|
cmd->sense_buffer[2],
|
|
*((unsigned int *)(cmd->sense_buffer + 3)));
|
|
}
|
|
|
|
if (status == (CHECK_CONDITION << 1)) {
|
|
cmd->result = DID_BAD_TARGET << 16;
|
|
goto ckc_e;
|
|
}
|
|
dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE2\n");
|
|
|
|
if (srb->total_xfer_length
|
|
&& srb->total_xfer_length >= cmd->underflow)
|
|
cmd->result =
|
|
MK_RES_LNX(DRIVER_SENSE, DID_OK,
|
|
srb->end_message, CHECK_CONDITION);
|
|
/*SET_RES_DID(cmd->result,DID_OK) */
|
|
else
|
|
cmd->result =
|
|
MK_RES_LNX(DRIVER_SENSE, DID_OK,
|
|
srb->end_message, CHECK_CONDITION);
|
|
|
|
goto ckc_e;
|
|
}
|
|
|
|
/*************************************************************/
|
|
if (status) {
|
|
/*
|
|
* target status..........................
|
|
*/
|
|
if (status_byte(status) == CHECK_CONDITION) {
|
|
request_sense(acb, dcb, srb);
|
|
return;
|
|
} else if (status_byte(status) == QUEUE_FULL) {
|
|
tempcnt = (u8)list_size(&dcb->srb_going_list);
|
|
dprintkl(KERN_INFO, "QUEUE_FULL for dev <%02i-%i> with %i cmnds\n",
|
|
dcb->target_id, dcb->target_lun, tempcnt);
|
|
if (tempcnt > 1)
|
|
tempcnt--;
|
|
dcb->max_command = tempcnt;
|
|
free_tag(dcb, srb);
|
|
srb_going_to_waiting_move(dcb, srb);
|
|
waiting_set_timer(acb, HZ / 20);
|
|
srb->adapter_status = 0;
|
|
srb->target_status = 0;
|
|
return;
|
|
} else if (status == SCSI_STAT_SEL_TIMEOUT) {
|
|
srb->adapter_status = H_SEL_TIMEOUT;
|
|
srb->target_status = 0;
|
|
cmd->result = DID_NO_CONNECT << 16;
|
|
} else {
|
|
srb->adapter_status = 0;
|
|
SET_RES_DID(cmd->result, DID_ERROR);
|
|
SET_RES_MSG(cmd->result, srb->end_message);
|
|
SET_RES_TARGET(cmd->result, status);
|
|
|
|
}
|
|
} else {
|
|
/*
|
|
** process initiator status..........................
|
|
*/
|
|
status = srb->adapter_status;
|
|
if (status & H_OVER_UNDER_RUN) {
|
|
srb->target_status = 0;
|
|
SET_RES_DID(cmd->result, DID_OK);
|
|
SET_RES_MSG(cmd->result, srb->end_message);
|
|
} else if (srb->status & PARITY_ERROR) {
|
|
SET_RES_DID(cmd->result, DID_PARITY);
|
|
SET_RES_MSG(cmd->result, srb->end_message);
|
|
} else { /* No error */
|
|
|
|
srb->adapter_status = 0;
|
|
srb->target_status = 0;
|
|
SET_RES_DID(cmd->result, DID_OK);
|
|
}
|
|
}
|
|
|
|
if (dir != PCI_DMA_NONE && scsi_sg_count(cmd))
|
|
pci_dma_sync_sg_for_cpu(acb->dev, scsi_sglist(cmd),
|
|
scsi_sg_count(cmd), dir);
|
|
|
|
ckc_only = 0;
|
|
/* Check Error Conditions */
|
|
ckc_e:
|
|
|
|
if (cmd->cmnd[0] == INQUIRY) {
|
|
unsigned char *base = NULL;
|
|
struct ScsiInqData *ptr;
|
|
unsigned long flags = 0;
|
|
struct scatterlist* sg = scsi_sglist(cmd);
|
|
size_t offset = 0, len = sizeof(struct ScsiInqData);
|
|
|
|
local_irq_save(flags);
|
|
base = scsi_kmap_atomic_sg(sg, scsi_sg_count(cmd), &offset, &len);
|
|
ptr = (struct ScsiInqData *)(base + offset);
|
|
|
|
if (!ckc_only && (cmd->result & RES_DID) == 0
|
|
&& cmd->cmnd[2] == 0 && scsi_bufflen(cmd) >= 8
|
|
&& dir != PCI_DMA_NONE && ptr && (ptr->Vers & 0x07) >= 2)
|
|
dcb->inquiry7 = ptr->Flags;
|
|
|
|
/*if( srb->cmd->cmnd[0] == INQUIRY && */
|
|
/* (host_byte(cmd->result) == DID_OK || status_byte(cmd->result) & CHECK_CONDITION) ) */
|
|
if ((cmd->result == (DID_OK << 16) ||
|
|
status_byte(cmd->result) == CHECK_CONDITION)) {
|
|
if (!dcb->init_tcq_flag) {
|
|
add_dev(acb, dcb, ptr);
|
|
dcb->init_tcq_flag = 1;
|
|
}
|
|
}
|
|
|
|
scsi_kunmap_atomic_sg(base);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/* Here is the info for Doug Gilbert's sg3 ... */
|
|
scsi_set_resid(cmd, srb->total_xfer_length);
|
|
/* This may be interpreted by sb. or not ... */
|
|
cmd->SCp.this_residual = srb->total_xfer_length;
|
|
cmd->SCp.buffers_residual = 0;
|
|
if (debug_enabled(DBG_KG)) {
|
|
if (srb->total_xfer_length)
|
|
dprintkdbg(DBG_KG, "srb_done: (0x%p) <%02i-%i> "
|
|
"cmnd=0x%02x Missed %i bytes\n",
|
|
cmd, cmd->device->id, (u8)cmd->device->lun,
|
|
cmd->cmnd[0], srb->total_xfer_length);
|
|
}
|
|
|
|
srb_going_remove(dcb, srb);
|
|
/* Add to free list */
|
|
if (srb == acb->tmp_srb)
|
|
dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
|
|
else {
|
|
dprintkdbg(DBG_0, "srb_done: (0x%p) done result=0x%08x\n",
|
|
cmd, cmd->result);
|
|
srb_free_insert(acb, srb);
|
|
}
|
|
pci_unmap_srb(acb, srb);
|
|
|
|
cmd->scsi_done(cmd);
|
|
waiting_process_next(acb);
|
|
}
|
|
|
|
|
|
/* abort all cmds in our queues */
|
|
static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
|
|
struct scsi_cmnd *cmd, u8 force)
|
|
{
|
|
struct DeviceCtlBlk *dcb;
|
|
dprintkl(KERN_INFO, "doing_srb_done: pids ");
|
|
|
|
list_for_each_entry(dcb, &acb->dcb_list, list) {
|
|
struct ScsiReqBlk *srb;
|
|
struct ScsiReqBlk *tmp;
|
|
struct scsi_cmnd *p;
|
|
|
|
list_for_each_entry_safe(srb, tmp, &dcb->srb_going_list, list) {
|
|
enum dma_data_direction dir;
|
|
int result;
|
|
|
|
p = srb->cmd;
|
|
dir = p->sc_data_direction;
|
|
result = MK_RES(0, did_flag, 0, 0);
|
|
printk("G:%p(%02i-%i) ", p,
|
|
p->device->id, (u8)p->device->lun);
|
|
srb_going_remove(dcb, srb);
|
|
free_tag(dcb, srb);
|
|
srb_free_insert(acb, srb);
|
|
p->result = result;
|
|
pci_unmap_srb_sense(acb, srb);
|
|
pci_unmap_srb(acb, srb);
|
|
if (force) {
|
|
/* For new EH, we normally don't need to give commands back,
|
|
* as they all complete or all time out */
|
|
p->scsi_done(p);
|
|
}
|
|
}
|
|
if (!list_empty(&dcb->srb_going_list))
|
|
dprintkl(KERN_DEBUG,
|
|
"How could the ML send cmnds to the Going queue? <%02i-%i>\n",
|
|
dcb->target_id, dcb->target_lun);
|
|
if (dcb->tag_mask)
|
|
dprintkl(KERN_DEBUG,
|
|
"tag_mask for <%02i-%i> should be empty, is %08x!\n",
|
|
dcb->target_id, dcb->target_lun,
|
|
dcb->tag_mask);
|
|
|
|
/* Waiting queue */
|
|
list_for_each_entry_safe(srb, tmp, &dcb->srb_waiting_list, list) {
|
|
int result;
|
|
p = srb->cmd;
|
|
|
|
result = MK_RES(0, did_flag, 0, 0);
|
|
printk("W:%p<%02i-%i>", p, p->device->id,
|
|
(u8)p->device->lun);
|
|
srb_waiting_remove(dcb, srb);
|
|
srb_free_insert(acb, srb);
|
|
p->result = result;
|
|
pci_unmap_srb_sense(acb, srb);
|
|
pci_unmap_srb(acb, srb);
|
|
if (force) {
|
|
/* For new EH, we normally don't need to give commands back,
|
|
* as they all complete or all time out */
|
|
cmd->scsi_done(cmd);
|
|
}
|
|
}
|
|
if (!list_empty(&dcb->srb_waiting_list))
|
|
dprintkl(KERN_DEBUG, "ML queued %i cmnds again to <%02i-%i>\n",
|
|
list_size(&dcb->srb_waiting_list), dcb->target_id,
|
|
dcb->target_lun);
|
|
dcb->flag &= ~ABORT_DEV_;
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
|
|
static void reset_scsi_bus(struct AdapterCtlBlk *acb)
|
|
{
|
|
dprintkdbg(DBG_0, "reset_scsi_bus: acb=%p\n", acb);
|
|
acb->acb_flag |= RESET_DEV; /* RESET_DETECT, RESET_DONE, RESET_DEV */
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
|
|
|
|
while (!(DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET))
|
|
/* nothing */;
|
|
}
|
|
|
|
|
|
static void set_basic_config(struct AdapterCtlBlk *acb)
|
|
{
|
|
u8 bval;
|
|
u16 wval;
|
|
DC395x_write8(acb, TRM_S1040_SCSI_TIMEOUT, acb->sel_timeout);
|
|
if (acb->config & HCC_PARITY)
|
|
bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK;
|
|
else
|
|
bval = PHASELATCH | INITIATOR | BLOCKRST;
|
|
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG0, bval);
|
|
|
|
/* program configuration 1: Act_Neg (+ Act_Neg_Enh? + Fast_Filter? + DataDis?) */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG1, 0x03); /* was 0x13: default */
|
|
/* program Host ID */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);
|
|
/* set ansynchronous transfer */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, 0x00);
|
|
/* Turn LED control off */
|
|
wval = DC395x_read16(acb, TRM_S1040_GEN_CONTROL) & 0x7F;
|
|
DC395x_write16(acb, TRM_S1040_GEN_CONTROL, wval);
|
|
/* DMA config */
|
|
wval = DC395x_read16(acb, TRM_S1040_DMA_CONFIG) & ~DMA_FIFO_CTRL;
|
|
wval |=
|
|
DMA_FIFO_HALF_HALF | DMA_ENHANCE /*| DMA_MEM_MULTI_READ */ ;
|
|
DC395x_write16(acb, TRM_S1040_DMA_CONFIG, wval);
|
|
/* Clear pending interrupt status */
|
|
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
|
|
/* Enable SCSI interrupt */
|
|
DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x7F);
|
|
DC395x_write8(acb, TRM_S1040_DMA_INTEN, EN_SCSIINTR | EN_DMAXFERERROR
|
|
/*| EN_DMAXFERABORT | EN_DMAXFERCOMP | EN_FORCEDMACOMP */
|
|
);
|
|
}
|
|
|
|
|
|
static void scsi_reset_detect(struct AdapterCtlBlk *acb)
|
|
{
|
|
dprintkl(KERN_INFO, "scsi_reset_detect: acb=%p\n", acb);
|
|
/* delay half a second */
|
|
if (timer_pending(&acb->waiting_timer))
|
|
del_timer(&acb->waiting_timer);
|
|
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
|
|
/*DC395x_write8(acb, TRM_S1040_DMA_CONTROL,STOPDMAXFER); */
|
|
udelay(500);
|
|
/* Maybe we locked up the bus? Then lets wait even longer ... */
|
|
acb->last_reset =
|
|
jiffies + 5 * HZ / 2 +
|
|
HZ * acb->eeprom.delay_time;
|
|
|
|
clear_fifo(acb, "scsi_reset_detect");
|
|
set_basic_config(acb);
|
|
/*1.25 */
|
|
/*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT); */
|
|
|
|
if (acb->acb_flag & RESET_DEV) { /* RESET_DETECT, RESET_DONE, RESET_DEV */
|
|
acb->acb_flag |= RESET_DONE;
|
|
} else {
|
|
acb->acb_flag |= RESET_DETECT;
|
|
reset_dev_param(acb);
|
|
doing_srb_done(acb, DID_RESET, NULL, 1);
|
|
/*DC395x_RecoverSRB( acb ); */
|
|
acb->active_dcb = NULL;
|
|
acb->acb_flag = 0;
|
|
waiting_process_next(acb);
|
|
}
|
|
}
|
|
|
|
|
|
static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
|
|
struct ScsiReqBlk *srb)
|
|
{
|
|
struct scsi_cmnd *cmd = srb->cmd;
|
|
dprintkdbg(DBG_1, "request_sense: (0x%p) <%02i-%i>\n",
|
|
cmd, cmd->device->id, (u8)cmd->device->lun);
|
|
|
|
srb->flag |= AUTO_REQSENSE;
|
|
srb->adapter_status = 0;
|
|
srb->target_status = 0;
|
|
|
|
/* KG: Can this prevent crap sense data ? */
|
|
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
|
|
|
|
/* Save some data */
|
|
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address =
|
|
srb->segment_x[0].address;
|
|
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length =
|
|
srb->segment_x[0].length;
|
|
srb->xferred = srb->total_xfer_length;
|
|
/* srb->segment_x : a one entry of S/G list table */
|
|
srb->total_xfer_length = SCSI_SENSE_BUFFERSIZE;
|
|
srb->segment_x[0].length = SCSI_SENSE_BUFFERSIZE;
|
|
/* Map sense buffer */
|
|
srb->segment_x[0].address =
|
|
pci_map_single(acb->dev, cmd->sense_buffer,
|
|
SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
|
|
dprintkdbg(DBG_SG, "request_sense: map buffer %p->%08x(%05x)\n",
|
|
cmd->sense_buffer, srb->segment_x[0].address,
|
|
SCSI_SENSE_BUFFERSIZE);
|
|
srb->sg_count = 1;
|
|
srb->sg_index = 0;
|
|
|
|
if (start_scsi(acb, dcb, srb)) { /* Should only happen, if sb. else grabs the bus */
|
|
dprintkl(KERN_DEBUG,
|
|
"request_sense: (0x%p) failed <%02i-%i>\n",
|
|
srb->cmd, dcb->target_id, dcb->target_lun);
|
|
srb_going_to_waiting_move(dcb, srb);
|
|
waiting_set_timer(acb, HZ / 100);
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* device_alloc - Allocate a new device instance. This create the
|
|
* devices instance and sets up all the data items. The adapter
|
|
* instance is required to obtain confiuration information for this
|
|
* device. This does *not* add this device to the adapters device
|
|
* list.
|
|
*
|
|
* @acb: The adapter to obtain configuration information from.
|
|
* @target: The target for the new device.
|
|
* @lun: The lun for the new device.
|
|
*
|
|
* Return the new device if successful or NULL on failure.
|
|
**/
|
|
static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
|
|
u8 target, u8 lun)
|
|
{
|
|
struct NvRamType *eeprom = &acb->eeprom;
|
|
u8 period_index = eeprom->target[target].period & 0x07;
|
|
struct DeviceCtlBlk *dcb;
|
|
|
|
dcb = kmalloc(sizeof(struct DeviceCtlBlk), GFP_ATOMIC);
|
|
dprintkdbg(DBG_0, "device_alloc: <%02i-%i>\n", target, lun);
|
|
if (!dcb)
|
|
return NULL;
|
|
dcb->acb = NULL;
|
|
INIT_LIST_HEAD(&dcb->srb_going_list);
|
|
INIT_LIST_HEAD(&dcb->srb_waiting_list);
|
|
dcb->active_srb = NULL;
|
|
dcb->tag_mask = 0;
|
|
dcb->max_command = 1;
|
|
dcb->target_id = target;
|
|
dcb->target_lun = lun;
|
|
dcb->dev_mode = eeprom->target[target].cfg0;
|
|
#ifndef DC395x_NO_DISCONNECT
|
|
dcb->identify_msg =
|
|
IDENTIFY(dcb->dev_mode & NTC_DO_DISCONNECT, lun);
|
|
#else
|
|
dcb->identify_msg = IDENTIFY(0, lun);
|
|
#endif
|
|
dcb->inquiry7 = 0;
|
|
dcb->sync_mode = 0;
|
|
dcb->min_nego_period = clock_period[period_index];
|
|
dcb->sync_period = 0;
|
|
dcb->sync_offset = 0;
|
|
dcb->flag = 0;
|
|
|
|
#ifndef DC395x_NO_WIDE
|
|
if ((dcb->dev_mode & NTC_DO_WIDE_NEGO)
|
|
&& (acb->config & HCC_WIDE_CARD))
|
|
dcb->sync_mode |= WIDE_NEGO_ENABLE;
|
|
#endif
|
|
#ifndef DC395x_NO_SYNC
|
|
if (dcb->dev_mode & NTC_DO_SYNC_NEGO)
|
|
if (!(lun) || current_sync_offset)
|
|
dcb->sync_mode |= SYNC_NEGO_ENABLE;
|
|
#endif
|
|
if (dcb->target_lun != 0) {
|
|
/* Copy settings */
|
|
struct DeviceCtlBlk *p;
|
|
list_for_each_entry(p, &acb->dcb_list, list)
|
|
if (p->target_id == dcb->target_id)
|
|
break;
|
|
dprintkdbg(DBG_1,
|
|
"device_alloc: <%02i-%i> copy from <%02i-%i>\n",
|
|
dcb->target_id, dcb->target_lun,
|
|
p->target_id, p->target_lun);
|
|
dcb->sync_mode = p->sync_mode;
|
|
dcb->sync_period = p->sync_period;
|
|
dcb->min_nego_period = p->min_nego_period;
|
|
dcb->sync_offset = p->sync_offset;
|
|
dcb->inquiry7 = p->inquiry7;
|
|
}
|
|
return dcb;
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_add_device - Adds the device instance to the adaptor instance.
|
|
*
|
|
* @acb: The adapter device to be updated
|
|
* @dcb: A newly created and initialised device instance to add.
|
|
**/
|
|
static void adapter_add_device(struct AdapterCtlBlk *acb,
|
|
struct DeviceCtlBlk *dcb)
|
|
{
|
|
/* backpointer to adapter */
|
|
dcb->acb = acb;
|
|
|
|
/* set run_robin to this device if it is currently empty */
|
|
if (list_empty(&acb->dcb_list))
|
|
acb->dcb_run_robin = dcb;
|
|
|
|
/* add device to list */
|
|
list_add_tail(&dcb->list, &acb->dcb_list);
|
|
|
|
/* update device maps */
|
|
acb->dcb_map[dcb->target_id] |= (1 << dcb->target_lun);
|
|
acb->children[dcb->target_id][dcb->target_lun] = dcb;
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_remove_device - Removes the device instance from the adaptor
|
|
* instance. The device instance is not check in any way or freed by this.
|
|
* The caller is expected to take care of that. This will simply remove the
|
|
* device from the adapters data strcutures.
|
|
*
|
|
* @acb: The adapter device to be updated
|
|
* @dcb: A device that has previously been added to the adapter.
|
|
**/
|
|
static void adapter_remove_device(struct AdapterCtlBlk *acb,
|
|
struct DeviceCtlBlk *dcb)
|
|
{
|
|
struct DeviceCtlBlk *i;
|
|
struct DeviceCtlBlk *tmp;
|
|
dprintkdbg(DBG_0, "adapter_remove_device: <%02i-%i>\n",
|
|
dcb->target_id, dcb->target_lun);
|
|
|
|
/* fix up any pointers to this device that we have in the adapter */
|
|
if (acb->active_dcb == dcb)
|
|
acb->active_dcb = NULL;
|
|
if (acb->dcb_run_robin == dcb)
|
|
acb->dcb_run_robin = dcb_get_next(&acb->dcb_list, dcb);
|
|
|
|
/* unlink from list */
|
|
list_for_each_entry_safe(i, tmp, &acb->dcb_list, list)
|
|
if (dcb == i) {
|
|
list_del(&i->list);
|
|
break;
|
|
}
|
|
|
|
/* clear map and children */
|
|
acb->dcb_map[dcb->target_id] &= ~(1 << dcb->target_lun);
|
|
acb->children[dcb->target_id][dcb->target_lun] = NULL;
|
|
dcb->acb = NULL;
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_remove_and_free_device - Removes a single device from the adapter
|
|
* and then frees the device information.
|
|
*
|
|
* @acb: The adapter device to be updated
|
|
* @dcb: A device that has previously been added to the adapter.
|
|
*/
|
|
static void adapter_remove_and_free_device(struct AdapterCtlBlk *acb,
|
|
struct DeviceCtlBlk *dcb)
|
|
{
|
|
if (list_size(&dcb->srb_going_list) > 1) {
|
|
dprintkdbg(DBG_1, "adapter_remove_and_free_device: <%02i-%i> "
|
|
"Won't remove because of %i active requests.\n",
|
|
dcb->target_id, dcb->target_lun,
|
|
list_size(&dcb->srb_going_list));
|
|
return;
|
|
}
|
|
adapter_remove_device(acb, dcb);
|
|
kfree(dcb);
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_remove_and_free_all_devices - Removes and frees all of the
|
|
* devices associated with the specified adapter.
|
|
*
|
|
* @acb: The adapter from which all devices should be removed.
|
|
**/
|
|
static void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
|
|
{
|
|
struct DeviceCtlBlk *dcb;
|
|
struct DeviceCtlBlk *tmp;
|
|
dprintkdbg(DBG_1, "adapter_remove_and_free_all_devices: num=%i\n",
|
|
list_size(&acb->dcb_list));
|
|
|
|
list_for_each_entry_safe(dcb, tmp, &acb->dcb_list, list)
|
|
adapter_remove_and_free_device(acb, dcb);
|
|
}
|
|
|
|
|
|
/**
|
|
* dc395x_slave_alloc - Called by the scsi mid layer to tell us about a new
|
|
* scsi device that we need to deal with. We allocate a new device and then
|
|
* insert that device into the adapters device list.
|
|
*
|
|
* @scsi_device: The new scsi device that we need to handle.
|
|
**/
|
|
static int dc395x_slave_alloc(struct scsi_device *scsi_device)
|
|
{
|
|
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
|
|
struct DeviceCtlBlk *dcb;
|
|
|
|
dcb = device_alloc(acb, scsi_device->id, scsi_device->lun);
|
|
if (!dcb)
|
|
return -ENOMEM;
|
|
adapter_add_device(acb, dcb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* dc395x_slave_destroy - Called by the scsi mid layer to tell us about a
|
|
* device that is going away.
|
|
*
|
|
* @scsi_device: The new scsi device that we need to handle.
|
|
**/
|
|
static void dc395x_slave_destroy(struct scsi_device *scsi_device)
|
|
{
|
|
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
|
|
struct DeviceCtlBlk *dcb = find_dcb(acb, scsi_device->id, scsi_device->lun);
|
|
if (dcb)
|
|
adapter_remove_and_free_device(acb, dcb);
|
|
}
|
|
|
|
|
|
|
|
|
|
/**
|
|
* trms1040_wait_30us: wait for 30 us
|
|
*
|
|
* Waits for 30us (using the chip by the looks of it..)
|
|
*
|
|
* @io_port: base I/O address
|
|
**/
|
|
static void trms1040_wait_30us(unsigned long io_port)
|
|
{
|
|
/* ScsiPortStallExecution(30); wait 30 us */
|
|
outb(5, io_port + TRM_S1040_GEN_TIMER);
|
|
while (!(inb(io_port + TRM_S1040_GEN_STATUS) & GTIMEOUT))
|
|
/* nothing */ ;
|
|
}
|
|
|
|
|
|
/**
|
|
* trms1040_write_cmd - write the secified command and address to
|
|
* chip
|
|
*
|
|
* @io_port: base I/O address
|
|
* @cmd: SB + op code (command) to send
|
|
* @addr: address to send
|
|
**/
|
|
static void trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
|
|
{
|
|
int i;
|
|
u8 send_data;
|
|
|
|
/* program SB + OP code */
|
|
for (i = 0; i < 3; i++, cmd <<= 1) {
|
|
send_data = NVR_SELECT;
|
|
if (cmd & 0x04) /* Start from bit 2 */
|
|
send_data |= NVR_BITOUT;
|
|
|
|
outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
outb((send_data | NVR_CLOCK),
|
|
io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
}
|
|
|
|
/* send address */
|
|
for (i = 0; i < 7; i++, addr <<= 1) {
|
|
send_data = NVR_SELECT;
|
|
if (addr & 0x40) /* Start from bit 6 */
|
|
send_data |= NVR_BITOUT;
|
|
|
|
outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
outb((send_data | NVR_CLOCK),
|
|
io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
}
|
|
outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
}
|
|
|
|
|
|
/**
|
|
* trms1040_set_data - store a single byte in the eeprom
|
|
*
|
|
* Called from write all to write a single byte into the SSEEPROM
|
|
* Which is done one bit at a time.
|
|
*
|
|
* @io_port: base I/O address
|
|
* @addr: offset into EEPROM
|
|
* @byte: bytes to write
|
|
**/
|
|
static void trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
|
|
{
|
|
int i;
|
|
u8 send_data;
|
|
|
|
/* Send write command & address */
|
|
trms1040_write_cmd(io_port, 0x05, addr);
|
|
|
|
/* Write data */
|
|
for (i = 0; i < 8; i++, byte <<= 1) {
|
|
send_data = NVR_SELECT;
|
|
if (byte & 0x80) /* Start from bit 7 */
|
|
send_data |= NVR_BITOUT;
|
|
|
|
outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
outb((send_data | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
}
|
|
outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
|
|
/* Disable chip select */
|
|
outb(0, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
|
|
outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
|
|
/* Wait for write ready */
|
|
while (1) {
|
|
outb((NVR_SELECT | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
|
|
outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
|
|
if (inb(io_port + TRM_S1040_GEN_NVRAM) & NVR_BITIN)
|
|
break;
|
|
}
|
|
|
|
/* Disable chip select */
|
|
outb(0, io_port + TRM_S1040_GEN_NVRAM);
|
|
}
|
|
|
|
|
|
/**
|
|
* trms1040_write_all - write 128 bytes to the eeprom
|
|
*
|
|
* Write the supplied 128 bytes to the chips SEEPROM
|
|
*
|
|
* @eeprom: the data to write
|
|
* @io_port: the base io port
|
|
**/
|
|
static void trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
|
|
{
|
|
u8 *b_eeprom = (u8 *)eeprom;
|
|
u8 addr;
|
|
|
|
/* Enable SEEPROM */
|
|
outb((inb(io_port + TRM_S1040_GEN_CONTROL) | EN_EEPROM),
|
|
io_port + TRM_S1040_GEN_CONTROL);
|
|
|
|
/* write enable */
|
|
trms1040_write_cmd(io_port, 0x04, 0xFF);
|
|
outb(0, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
|
|
/* write */
|
|
for (addr = 0; addr < 128; addr++, b_eeprom++)
|
|
trms1040_set_data(io_port, addr, *b_eeprom);
|
|
|
|
/* write disable */
|
|
trms1040_write_cmd(io_port, 0x04, 0x00);
|
|
outb(0, io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
|
|
/* Disable SEEPROM */
|
|
outb((inb(io_port + TRM_S1040_GEN_CONTROL) & ~EN_EEPROM),
|
|
io_port + TRM_S1040_GEN_CONTROL);
|
|
}
|
|
|
|
|
|
/**
|
|
* trms1040_get_data - get a single byte from the eeprom
|
|
*
|
|
* Called from read all to read a single byte into the SSEEPROM
|
|
* Which is done one bit at a time.
|
|
*
|
|
* @io_port: base I/O address
|
|
* @addr: offset into SEEPROM
|
|
*
|
|
* Returns the byte read.
|
|
**/
|
|
static u8 trms1040_get_data(unsigned long io_port, u8 addr)
|
|
{
|
|
int i;
|
|
u8 read_byte;
|
|
u8 result = 0;
|
|
|
|
/* Send read command & address */
|
|
trms1040_write_cmd(io_port, 0x06, addr);
|
|
|
|
/* read data */
|
|
for (i = 0; i < 8; i++) {
|
|
outb((NVR_SELECT | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
|
|
trms1040_wait_30us(io_port);
|
|
outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
|
|
|
|
/* Get data bit while falling edge */
|
|
read_byte = inb(io_port + TRM_S1040_GEN_NVRAM);
|
|
result <<= 1;
|
|
if (read_byte & NVR_BITIN)
|
|
result |= 1;
|
|
|
|
trms1040_wait_30us(io_port);
|
|
}
|
|
|
|
/* Disable chip select */
|
|
outb(0, io_port + TRM_S1040_GEN_NVRAM);
|
|
return result;
|
|
}
|
|
|
|
|
|
/**
|
|
* trms1040_read_all - read all bytes from the eeprom
|
|
*
|
|
* Read the 128 bytes from the SEEPROM.
|
|
*
|
|
* @eeprom: where to store the data
|
|
* @io_port: the base io port
|
|
**/
|
|
static void trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
|
|
{
|
|
u8 *b_eeprom = (u8 *)eeprom;
|
|
u8 addr;
|
|
|
|
/* Enable SEEPROM */
|
|
outb((inb(io_port + TRM_S1040_GEN_CONTROL) | EN_EEPROM),
|
|
io_port + TRM_S1040_GEN_CONTROL);
|
|
|
|
/* read details */
|
|
for (addr = 0; addr < 128; addr++, b_eeprom++)
|
|
*b_eeprom = trms1040_get_data(io_port, addr);
|
|
|
|
/* Disable SEEPROM */
|
|
outb((inb(io_port + TRM_S1040_GEN_CONTROL) & ~EN_EEPROM),
|
|
io_port + TRM_S1040_GEN_CONTROL);
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* check_eeprom - get and check contents of the eeprom
|
|
*
|
|
* Read seeprom 128 bytes into the memory provider in eeprom.
|
|
* Checks the checksum and if it's not correct it uses a set of default
|
|
* values.
|
|
*
|
|
* @eeprom: caller allocated strcuture to read the eeprom data into
|
|
* @io_port: io port to read from
|
|
**/
|
|
static void check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
|
|
{
|
|
u16 *w_eeprom = (u16 *)eeprom;
|
|
u16 w_addr;
|
|
u16 cksum;
|
|
u32 d_addr;
|
|
u32 *d_eeprom;
|
|
|
|
trms1040_read_all(eeprom, io_port); /* read eeprom */
|
|
|
|
cksum = 0;
|
|
for (w_addr = 0, w_eeprom = (u16 *)eeprom; w_addr < 64;
|
|
w_addr++, w_eeprom++)
|
|
cksum += *w_eeprom;
|
|
if (cksum != 0x1234) {
|
|
/*
|
|
* Checksum is wrong.
|
|
* Load a set of defaults into the eeprom buffer
|
|
*/
|
|
dprintkl(KERN_WARNING,
|
|
"EEProm checksum error: using default values and options.\n");
|
|
eeprom->sub_vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
|
|
eeprom->sub_vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
|
|
eeprom->sub_sys_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
|
|
eeprom->sub_sys_id[1] =
|
|
(u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
|
|
eeprom->sub_class = 0x00;
|
|
eeprom->vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
|
|
eeprom->vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
|
|
eeprom->device_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
|
|
eeprom->device_id[1] =
|
|
(u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
|
|
eeprom->reserved = 0x00;
|
|
|
|
for (d_addr = 0, d_eeprom = (u32 *)eeprom->target;
|
|
d_addr < 16; d_addr++, d_eeprom++)
|
|
*d_eeprom = 0x00000077; /* cfg3,cfg2,period,cfg0 */
|
|
|
|
*d_eeprom++ = 0x04000F07; /* max_tag,delay_time,channel_cfg,scsi_id */
|
|
*d_eeprom++ = 0x00000015; /* reserved1,boot_lun,boot_target,reserved0 */
|
|
for (d_addr = 0; d_addr < 12; d_addr++, d_eeprom++)
|
|
*d_eeprom = 0x00;
|
|
|
|
/* Now load defaults (maybe set by boot/module params) */
|
|
set_safe_settings();
|
|
fix_settings();
|
|
eeprom_override(eeprom);
|
|
|
|
eeprom->cksum = 0x00;
|
|
for (w_addr = 0, cksum = 0, w_eeprom = (u16 *)eeprom;
|
|
w_addr < 63; w_addr++, w_eeprom++)
|
|
cksum += *w_eeprom;
|
|
|
|
*w_eeprom = 0x1234 - cksum;
|
|
trms1040_write_all(eeprom, io_port);
|
|
eeprom->delay_time = cfg_data[CFG_RESET_DELAY].value;
|
|
} else {
|
|
set_safe_settings();
|
|
eeprom_index_to_delay(eeprom);
|
|
eeprom_override(eeprom);
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* print_eeprom_settings - output the eeprom settings
|
|
* to the kernel log so people can see what they were.
|
|
*
|
|
* @eeprom: The eeprom data strucutre to show details for.
|
|
**/
|
|
static void print_eeprom_settings(struct NvRamType *eeprom)
|
|
{
|
|
dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
|
|
eeprom->scsi_id,
|
|
eeprom->target[0].period,
|
|
clock_speed[eeprom->target[0].period] / 10,
|
|
clock_speed[eeprom->target[0].period] % 10,
|
|
eeprom->target[0].cfg0);
|
|
dprintkl(KERN_INFO, " AdaptMode=0x%02x, Tags=%i(%02i), DelayReset=%is\n",
|
|
eeprom->channel_cfg, eeprom->max_tag,
|
|
1 << eeprom->max_tag, eeprom->delay_time);
|
|
}
|
|
|
|
|
|
/* Free SG tables */
|
|
static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
|
|
{
|
|
int i;
|
|
const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
|
|
|
|
for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
|
|
kfree(acb->srb_array[i].segment_x);
|
|
}
|
|
|
|
|
|
/*
|
|
* Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
|
|
* should never cross a page boundary */
|
|
static int adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
|
|
{
|
|
const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
|
|
*SEGMENTX_LEN;
|
|
int pages = (mem_needed+(PAGE_SIZE-1))/PAGE_SIZE;
|
|
const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
|
|
int srb_idx = 0;
|
|
unsigned i = 0;
|
|
struct SGentry *uninitialized_var(ptr);
|
|
|
|
for (i = 0; i < DC395x_MAX_SRB_CNT; i++)
|
|
acb->srb_array[i].segment_x = NULL;
|
|
|
|
dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
|
|
while (pages--) {
|
|
ptr = kmalloc(PAGE_SIZE, GFP_KERNEL);
|
|
if (!ptr) {
|
|
adapter_sg_tables_free(acb);
|
|
return 1;
|
|
}
|
|
dprintkdbg(DBG_1, "Allocate %li bytes at %p for SG segments %i\n",
|
|
PAGE_SIZE, ptr, srb_idx);
|
|
i = 0;
|
|
while (i < srbs_per_page && srb_idx < DC395x_MAX_SRB_CNT)
|
|
acb->srb_array[srb_idx++].segment_x =
|
|
ptr + (i++ * DC395x_MAX_SG_LISTENTRY);
|
|
}
|
|
if (i < srbs_per_page)
|
|
acb->srb.segment_x =
|
|
ptr + (i * DC395x_MAX_SG_LISTENTRY);
|
|
else
|
|
dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* adapter_print_config - print adapter connection and termination
|
|
* config
|
|
*
|
|
* The io port in the adapter needs to have been set before calling
|
|
* this function.
|
|
*
|
|
* @acb: The adapter to print the information for.
|
|
**/
|
|
static void adapter_print_config(struct AdapterCtlBlk *acb)
|
|
{
|
|
u8 bval;
|
|
|
|
bval = DC395x_read8(acb, TRM_S1040_GEN_STATUS);
|
|
dprintkl(KERN_INFO, "%sConnectors: ",
|
|
((bval & WIDESCSI) ? "(Wide) " : ""));
|
|
if (!(bval & CON5068))
|
|
printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50");
|
|
if (!(bval & CON68))
|
|
printk("int68%s ", !(bval & INT68HIGH) ? "" : "(50)");
|
|
if (!(bval & CON50))
|
|
printk("int50 ");
|
|
if ((bval & (CON5068 | CON50 | CON68)) ==
|
|
0 /*(CON5068 | CON50 | CON68) */ )
|
|
printk(" Oops! (All 3?) ");
|
|
bval = DC395x_read8(acb, TRM_S1040_GEN_CONTROL);
|
|
printk(" Termination: ");
|
|
if (bval & DIS_TERM)
|
|
printk("Disabled\n");
|
|
else {
|
|
if (bval & AUTOTERM)
|
|
printk("Auto ");
|
|
if (bval & LOW8TERM)
|
|
printk("Low ");
|
|
if (bval & UP8TERM)
|
|
printk("High ");
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_init_params - Initialize the various parameters in the
|
|
* adapter structure. Note that the pointer to the scsi_host is set
|
|
* early (when this instance is created) and the io_port and irq
|
|
* values are set later after they have been reserved. This just gets
|
|
* everything set to a good starting position.
|
|
*
|
|
* The eeprom structure in the adapter needs to have been set before
|
|
* calling this function.
|
|
*
|
|
* @acb: The adapter to initialize.
|
|
**/
|
|
static void adapter_init_params(struct AdapterCtlBlk *acb)
|
|
{
|
|
struct NvRamType *eeprom = &acb->eeprom;
|
|
int i;
|
|
|
|
/* NOTE: acb->scsi_host is set at scsi_host/acb creation time */
|
|
/* NOTE: acb->io_port_base is set at port registration time */
|
|
/* NOTE: acb->io_port_len is set at port registration time */
|
|
|
|
INIT_LIST_HEAD(&acb->dcb_list);
|
|
acb->dcb_run_robin = NULL;
|
|
acb->active_dcb = NULL;
|
|
|
|
INIT_LIST_HEAD(&acb->srb_free_list);
|
|
/* temp SRB for Q tag used or abort command used */
|
|
acb->tmp_srb = &acb->srb;
|
|
timer_setup(&acb->waiting_timer, waiting_timeout, 0);
|
|
timer_setup(&acb->selto_timer, NULL, 0);
|
|
|
|
acb->srb_count = DC395x_MAX_SRB_CNT;
|
|
|
|
acb->sel_timeout = DC395x_SEL_TIMEOUT; /* timeout=250ms */
|
|
/* NOTE: acb->irq_level is set at IRQ registration time */
|
|
|
|
acb->tag_max_num = 1 << eeprom->max_tag;
|
|
if (acb->tag_max_num > 30)
|
|
acb->tag_max_num = 30;
|
|
|
|
acb->acb_flag = 0; /* RESET_DETECT, RESET_DONE, RESET_DEV */
|
|
acb->gmode2 = eeprom->channel_cfg;
|
|
acb->config = 0; /* NOTE: actually set in adapter_init_chip */
|
|
|
|
if (eeprom->channel_cfg & NAC_SCANLUN)
|
|
acb->lun_chk = 1;
|
|
acb->scan_devices = 1;
|
|
|
|
acb->scsi_host->this_id = eeprom->scsi_id;
|
|
acb->hostid_bit = (1 << acb->scsi_host->this_id);
|
|
|
|
for (i = 0; i < DC395x_MAX_SCSI_ID; i++)
|
|
acb->dcb_map[i] = 0;
|
|
|
|
acb->msg_len = 0;
|
|
|
|
/* link static array of srbs into the srb free list */
|
|
for (i = 0; i < acb->srb_count - 1; i++)
|
|
srb_free_insert(acb, &acb->srb_array[i]);
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_init_host - Initialize the scsi host instance based on
|
|
* values that we have already stored in the adapter instance. There's
|
|
* some mention that a lot of these are deprecated, so we won't use
|
|
* them (we'll use the ones in the adapter instance) but we'll fill
|
|
* them in in case something else needs them.
|
|
*
|
|
* The eeprom structure, irq and io ports in the adapter need to have
|
|
* been set before calling this function.
|
|
*
|
|
* @host: The scsi host instance to fill in the values for.
|
|
**/
|
|
static void adapter_init_scsi_host(struct Scsi_Host *host)
|
|
{
|
|
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
|
|
struct NvRamType *eeprom = &acb->eeprom;
|
|
|
|
host->max_cmd_len = 24;
|
|
host->can_queue = DC395x_MAX_CMD_QUEUE;
|
|
host->cmd_per_lun = DC395x_MAX_CMD_PER_LUN;
|
|
host->this_id = (int)eeprom->scsi_id;
|
|
host->io_port = acb->io_port_base;
|
|
host->n_io_port = acb->io_port_len;
|
|
host->dma_channel = -1;
|
|
host->unique_id = acb->io_port_base;
|
|
host->irq = acb->irq_level;
|
|
acb->last_reset = jiffies;
|
|
|
|
host->max_id = 16;
|
|
if (host->max_id - 1 == eeprom->scsi_id)
|
|
host->max_id--;
|
|
|
|
if (eeprom->channel_cfg & NAC_SCANLUN)
|
|
host->max_lun = 8;
|
|
else
|
|
host->max_lun = 1;
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_init_chip - Get the chip into a know state and figure out
|
|
* some of the settings that apply to this adapter.
|
|
*
|
|
* The io port in the adapter needs to have been set before calling
|
|
* this function. The config will be configured correctly on return.
|
|
*
|
|
* @acb: The adapter which we are to init.
|
|
**/
|
|
static void adapter_init_chip(struct AdapterCtlBlk *acb)
|
|
{
|
|
struct NvRamType *eeprom = &acb->eeprom;
|
|
|
|
/* Mask all the interrupt */
|
|
DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0x00);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x00);
|
|
|
|
/* Reset SCSI module */
|
|
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
|
|
|
|
/* Reset PCI/DMA module */
|
|
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
|
|
udelay(20);
|
|
|
|
/* program configuration 0 */
|
|
acb->config = HCC_AUTOTERM | HCC_PARITY;
|
|
if (DC395x_read8(acb, TRM_S1040_GEN_STATUS) & WIDESCSI)
|
|
acb->config |= HCC_WIDE_CARD;
|
|
|
|
if (eeprom->channel_cfg & NAC_POWERON_SCSI_RESET)
|
|
acb->config |= HCC_SCSI_RESET;
|
|
|
|
if (acb->config & HCC_SCSI_RESET) {
|
|
dprintkl(KERN_INFO, "Performing initial SCSI bus reset\n");
|
|
DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
|
|
|
|
/*while (!( DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET )); */
|
|
/*spin_unlock_irq (&io_request_lock); */
|
|
udelay(500);
|
|
|
|
acb->last_reset =
|
|
jiffies + HZ / 2 +
|
|
HZ * acb->eeprom.delay_time;
|
|
|
|
/*spin_lock_irq (&io_request_lock); */
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* init_adapter - Grab the resource for the card, setup the adapter
|
|
* information, set the card into a known state, create the various
|
|
* tables etc etc. This basically gets all adapter information all up
|
|
* to date, initialised and gets the chip in sync with it.
|
|
*
|
|
* @host: This hosts adapter structure
|
|
* @io_port: The base I/O port
|
|
* @irq: IRQ
|
|
*
|
|
* Returns 0 if the initialization succeeds, any other value on
|
|
* failure.
|
|
**/
|
|
static int adapter_init(struct AdapterCtlBlk *acb, unsigned long io_port,
|
|
u32 io_port_len, unsigned int irq)
|
|
{
|
|
if (!request_region(io_port, io_port_len, DC395X_NAME)) {
|
|
dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
|
|
goto failed;
|
|
}
|
|
/* store port base to indicate we have registered it */
|
|
acb->io_port_base = io_port;
|
|
acb->io_port_len = io_port_len;
|
|
|
|
if (request_irq(irq, dc395x_interrupt, IRQF_SHARED, DC395X_NAME, acb)) {
|
|
/* release the region we just claimed */
|
|
dprintkl(KERN_INFO, "Failed to register IRQ\n");
|
|
goto failed;
|
|
}
|
|
/* store irq to indicate we have registered it */
|
|
acb->irq_level = irq;
|
|
|
|
/* get eeprom configuration information and command line settings etc */
|
|
check_eeprom(&acb->eeprom, io_port);
|
|
print_eeprom_settings(&acb->eeprom);
|
|
|
|
/* setup adapter control block */
|
|
adapter_init_params(acb);
|
|
|
|
/* display card connectors/termination settings */
|
|
adapter_print_config(acb);
|
|
|
|
if (adapter_sg_tables_alloc(acb)) {
|
|
dprintkl(KERN_DEBUG, "Memory allocation for SG tables failed\n");
|
|
goto failed;
|
|
}
|
|
adapter_init_scsi_host(acb->scsi_host);
|
|
adapter_init_chip(acb);
|
|
set_basic_config(acb);
|
|
|
|
dprintkdbg(DBG_0,
|
|
"adapter_init: acb=%p, pdcb_map=%p psrb_array=%p "
|
|
"size{acb=0x%04x dcb=0x%04x srb=0x%04x}\n",
|
|
acb, acb->dcb_map, acb->srb_array, sizeof(struct AdapterCtlBlk),
|
|
sizeof(struct DeviceCtlBlk), sizeof(struct ScsiReqBlk));
|
|
return 0;
|
|
|
|
failed:
|
|
if (acb->irq_level)
|
|
free_irq(acb->irq_level, acb);
|
|
if (acb->io_port_base)
|
|
release_region(acb->io_port_base, acb->io_port_len);
|
|
adapter_sg_tables_free(acb);
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
/**
|
|
* adapter_uninit_chip - cleanly shut down the scsi controller chip,
|
|
* stopping all operations and disabling interrupt generation on the
|
|
* card.
|
|
*
|
|
* @acb: The adapter which we are to shutdown.
|
|
**/
|
|
static void adapter_uninit_chip(struct AdapterCtlBlk *acb)
|
|
{
|
|
/* disable interrupts */
|
|
DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0);
|
|
DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0);
|
|
|
|
/* reset the scsi bus */
|
|
if (acb->config & HCC_SCSI_RESET)
|
|
reset_scsi_bus(acb);
|
|
|
|
/* clear any pending interrupt state */
|
|
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* adapter_uninit - Shut down the chip and release any resources that
|
|
* we had allocated. Once this returns the adapter should not be used
|
|
* anymore.
|
|
*
|
|
* @acb: The adapter which we are to un-initialize.
|
|
**/
|
|
static void adapter_uninit(struct AdapterCtlBlk *acb)
|
|
{
|
|
unsigned long flags;
|
|
DC395x_LOCK_IO(acb->scsi_host, flags);
|
|
|
|
/* remove timers */
|
|
if (timer_pending(&acb->waiting_timer))
|
|
del_timer(&acb->waiting_timer);
|
|
if (timer_pending(&acb->selto_timer))
|
|
del_timer(&acb->selto_timer);
|
|
|
|
adapter_uninit_chip(acb);
|
|
adapter_remove_and_free_all_devices(acb);
|
|
DC395x_UNLOCK_IO(acb->scsi_host, flags);
|
|
|
|
if (acb->irq_level)
|
|
free_irq(acb->irq_level, acb);
|
|
if (acb->io_port_base)
|
|
release_region(acb->io_port_base, acb->io_port_len);
|
|
|
|
adapter_sg_tables_free(acb);
|
|
}
|
|
|
|
|
|
#undef YESNO
|
|
#define YESNO(YN) \
|
|
if (YN) seq_printf(m, " Yes ");\
|
|
else seq_printf(m, " No ")
|
|
|
|
static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
|
|
{
|
|
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
|
|
int spd, spd1;
|
|
struct DeviceCtlBlk *dcb;
|
|
unsigned long flags;
|
|
int dev;
|
|
|
|
seq_puts(m, DC395X_BANNER " PCI SCSI Host Adapter\n"
|
|
" Driver Version " DC395X_VERSION "\n");
|
|
|
|
DC395x_LOCK_IO(acb->scsi_host, flags);
|
|
|
|
seq_printf(m, "SCSI Host Nr %i, ", host->host_no);
|
|
seq_printf(m, "DC395U/UW/F DC315/U %s\n",
|
|
(acb->config & HCC_WIDE_CARD) ? "Wide" : "");
|
|
seq_printf(m, "io_port_base 0x%04lx, ", acb->io_port_base);
|
|
seq_printf(m, "irq_level 0x%04x, ", acb->irq_level);
|
|
seq_printf(m, " SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
|
|
|
|
seq_printf(m, "MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
|
|
seq_printf(m, "AdapterID %i\n", host->this_id);
|
|
|
|
seq_printf(m, "tag_max_num %i", acb->tag_max_num);
|
|
/*seq_printf(m, ", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
|
|
seq_printf(m, ", FilterCfg 0x%02x",
|
|
DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1));
|
|
seq_printf(m, ", DelayReset %is\n", acb->eeprom.delay_time);
|
|
/*seq_printf(m, "\n"); */
|
|
|
|
seq_printf(m, "Nr of DCBs: %i\n", list_size(&acb->dcb_list));
|
|
seq_printf(m, "Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
|
|
acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2],
|
|
acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5],
|
|
acb->dcb_map[6], acb->dcb_map[7]);
|
|
seq_printf(m, " %02x %02x %02x %02x %02x %02x %02x %02x\n",
|
|
acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10],
|
|
acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13],
|
|
acb->dcb_map[14], acb->dcb_map[15]);
|
|
|
|
seq_puts(m,
|
|
"Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
|
|
|
|
dev = 0;
|
|
list_for_each_entry(dcb, &acb->dcb_list, list) {
|
|
int nego_period;
|
|
seq_printf(m, "%02i %02i %02i ", dev, dcb->target_id,
|
|
dcb->target_lun);
|
|
YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK);
|
|
YESNO(dcb->sync_offset);
|
|
YESNO(dcb->sync_period & WIDE_SYNC);
|
|
YESNO(dcb->dev_mode & NTC_DO_DISCONNECT);
|
|
YESNO(dcb->dev_mode & NTC_DO_SEND_START);
|
|
YESNO(dcb->sync_mode & EN_TAG_QUEUEING);
|
|
nego_period = clock_period[dcb->sync_period & 0x07] << 2;
|
|
if (dcb->sync_offset)
|
|
seq_printf(m, " %03i ns ", nego_period);
|
|
else
|
|
seq_printf(m, " (%03i ns)", (dcb->min_nego_period << 2));
|
|
|
|
if (dcb->sync_offset & 0x0f) {
|
|
spd = 1000 / (nego_period);
|
|
spd1 = 1000 % (nego_period);
|
|
spd1 = (spd1 * 10 + nego_period / 2) / (nego_period);
|
|
seq_printf(m, " %2i.%1i M %02i ", spd, spd1,
|
|
(dcb->sync_offset & 0x0f));
|
|
} else
|
|
seq_puts(m, " ");
|
|
|
|
/* Add more info ... */
|
|
seq_printf(m, " %02i\n", dcb->max_command);
|
|
dev++;
|
|
}
|
|
|
|
if (timer_pending(&acb->waiting_timer))
|
|
seq_puts(m, "Waiting queue timer running\n");
|
|
else
|
|
seq_putc(m, '\n');
|
|
|
|
list_for_each_entry(dcb, &acb->dcb_list, list) {
|
|
struct ScsiReqBlk *srb;
|
|
if (!list_empty(&dcb->srb_waiting_list))
|
|
seq_printf(m, "DCB (%02i-%i): Waiting: %i:",
|
|
dcb->target_id, dcb->target_lun,
|
|
list_size(&dcb->srb_waiting_list));
|
|
list_for_each_entry(srb, &dcb->srb_waiting_list, list)
|
|
seq_printf(m, " %p", srb->cmd);
|
|
if (!list_empty(&dcb->srb_going_list))
|
|
seq_printf(m, "\nDCB (%02i-%i): Going : %i:",
|
|
dcb->target_id, dcb->target_lun,
|
|
list_size(&dcb->srb_going_list));
|
|
list_for_each_entry(srb, &dcb->srb_going_list, list)
|
|
seq_printf(m, " %p", srb->cmd);
|
|
if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
|
|
seq_putc(m, '\n');
|
|
}
|
|
|
|
if (debug_enabled(DBG_1)) {
|
|
seq_printf(m, "DCB list for ACB %p:\n", acb);
|
|
list_for_each_entry(dcb, &acb->dcb_list, list) {
|
|
seq_printf(m, "%p -> ", dcb);
|
|
}
|
|
seq_puts(m, "END\n");
|
|
}
|
|
|
|
DC395x_UNLOCK_IO(acb->scsi_host, flags);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct scsi_host_template dc395x_driver_template = {
|
|
.module = THIS_MODULE,
|
|
.proc_name = DC395X_NAME,
|
|
.show_info = dc395x_show_info,
|
|
.name = DC395X_BANNER " " DC395X_VERSION,
|
|
.queuecommand = dc395x_queue_command,
|
|
.bios_param = dc395x_bios_param,
|
|
.slave_alloc = dc395x_slave_alloc,
|
|
.slave_destroy = dc395x_slave_destroy,
|
|
.can_queue = DC395x_MAX_CAN_QUEUE,
|
|
.this_id = 7,
|
|
.sg_tablesize = DC395x_MAX_SG_TABLESIZE,
|
|
.cmd_per_lun = DC395x_MAX_CMD_PER_LUN,
|
|
.eh_abort_handler = dc395x_eh_abort,
|
|
.eh_bus_reset_handler = dc395x_eh_bus_reset,
|
|
.use_clustering = DISABLE_CLUSTERING,
|
|
};
|
|
|
|
|
|
/**
|
|
* banner_display - Display banner on first instance of driver
|
|
* initialized.
|
|
**/
|
|
static void banner_display(void)
|
|
{
|
|
static int banner_done = 0;
|
|
if (!banner_done)
|
|
{
|
|
dprintkl(KERN_INFO, "%s %s\n", DC395X_BANNER, DC395X_VERSION);
|
|
banner_done = 1;
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* dc395x_init_one - Initialise a single instance of the adapter.
|
|
*
|
|
* The PCI layer will call this once for each instance of the adapter
|
|
* that it finds in the system. The pci_dev strcuture indicates which
|
|
* instance we are being called from.
|
|
*
|
|
* @dev: The PCI device to initialize.
|
|
* @id: Looks like a pointer to the entry in our pci device table
|
|
* that was actually matched by the PCI subsystem.
|
|
*
|
|
* Returns 0 on success, or an error code (-ve) on failure.
|
|
**/
|
|
static int dc395x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct Scsi_Host *scsi_host = NULL;
|
|
struct AdapterCtlBlk *acb = NULL;
|
|
unsigned long io_port_base;
|
|
unsigned int io_port_len;
|
|
unsigned int irq;
|
|
|
|
dprintkdbg(DBG_0, "Init one instance (%s)\n", pci_name(dev));
|
|
banner_display();
|
|
|
|
if (pci_enable_device(dev))
|
|
{
|
|
dprintkl(KERN_INFO, "PCI Enable device failed.\n");
|
|
return -ENODEV;
|
|
}
|
|
io_port_base = pci_resource_start(dev, 0) & PCI_BASE_ADDRESS_IO_MASK;
|
|
io_port_len = pci_resource_len(dev, 0);
|
|
irq = dev->irq;
|
|
dprintkdbg(DBG_0, "IO_PORT=0x%04lx, IRQ=0x%x\n", io_port_base, dev->irq);
|
|
|
|
/* allocate scsi host information (includes out adapter) */
|
|
scsi_host = scsi_host_alloc(&dc395x_driver_template,
|
|
sizeof(struct AdapterCtlBlk));
|
|
if (!scsi_host) {
|
|
dprintkl(KERN_INFO, "scsi_host_alloc failed\n");
|
|
goto fail;
|
|
}
|
|
acb = (struct AdapterCtlBlk*)scsi_host->hostdata;
|
|
acb->scsi_host = scsi_host;
|
|
acb->dev = dev;
|
|
|
|
/* initialise the adapter and everything we need */
|
|
if (adapter_init(acb, io_port_base, io_port_len, irq)) {
|
|
dprintkl(KERN_INFO, "adapter init failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
pci_set_master(dev);
|
|
|
|
/* get the scsi mid level to scan for new devices on the bus */
|
|
if (scsi_add_host(scsi_host, &dev->dev)) {
|
|
dprintkl(KERN_ERR, "scsi_add_host failed\n");
|
|
goto fail;
|
|
}
|
|
pci_set_drvdata(dev, scsi_host);
|
|
scsi_scan_host(scsi_host);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
if (acb != NULL)
|
|
adapter_uninit(acb);
|
|
if (scsi_host != NULL)
|
|
scsi_host_put(scsi_host);
|
|
pci_disable_device(dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
|
|
/**
|
|
* dc395x_remove_one - Called to remove a single instance of the
|
|
* adapter.
|
|
*
|
|
* @dev: The PCI device to initialize.
|
|
**/
|
|
static void dc395x_remove_one(struct pci_dev *dev)
|
|
{
|
|
struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
|
|
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)(scsi_host->hostdata);
|
|
|
|
dprintkdbg(DBG_0, "dc395x_remove_one: acb=%p\n", acb);
|
|
|
|
scsi_remove_host(scsi_host);
|
|
adapter_uninit(acb);
|
|
pci_disable_device(dev);
|
|
scsi_host_put(scsi_host);
|
|
}
|
|
|
|
|
|
static struct pci_device_id dc395x_pci_table[] = {
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TEKRAM,
|
|
.device = PCI_DEVICE_ID_TEKRAM_TRMS1040,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
{} /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, dc395x_pci_table);
|
|
|
|
|
|
static struct pci_driver dc395x_driver = {
|
|
.name = DC395X_NAME,
|
|
.id_table = dc395x_pci_table,
|
|
.probe = dc395x_init_one,
|
|
.remove = dc395x_remove_one,
|
|
};
|
|
|
|
|
|
/**
|
|
* dc395x_module_init - Module initialization function
|
|
*
|
|
* Used by both module and built-in driver to initialise this driver.
|
|
**/
|
|
static int __init dc395x_module_init(void)
|
|
{
|
|
return pci_register_driver(&dc395x_driver);
|
|
}
|
|
|
|
|
|
/**
|
|
* dc395x_module_exit - Module cleanup function.
|
|
**/
|
|
static void __exit dc395x_module_exit(void)
|
|
{
|
|
pci_unregister_driver(&dc395x_driver);
|
|
}
|
|
|
|
|
|
module_init(dc395x_module_init);
|
|
module_exit(dc395x_module_exit);
|
|
|
|
MODULE_AUTHOR("C.L. Huang / Erich Chen / Kurt Garloff");
|
|
MODULE_DESCRIPTION("SCSI host adapter driver for Tekram TRM-S1040 based adapters: Tekram DC395 and DC315 series");
|
|
MODULE_LICENSE("GPL");
|