mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 02:36:42 +07:00
1d8aca9df6
Ux500 is regressing due to commit
a21763a0b1
"pinctrl: nomadik: activate strict mux mode" which disallows
Nomadik GPIO 5 to be muxed in as a level shifter voltage select
pin, as it is currently described as being used for RX on UART1.
The behaviour is correct, instead the hardware config has been
incorrecly specified: UART1 is indeed unused on HREFv60plus and
Snowball and that is why HREFv60plus can use the pins it would
normally occupy as the voltage select line for the MMC/SD
levelshifter (Snowball uses it for I2C4).
The reason UART1 was anyway enabled on these platforms was
probably to secure the port enumeration to userspace. This
can be solved by using aliases (done in a separate patch) so
we can now deactivate UART1 and let MMC/SD use it properly
on HREFv60plus. We explicitly activate it only for the
older HREFprev60 board.
To complete, we set up the pin configuration for these pins
properly in the sdi0 node.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
134 lines
2.7 KiB
Plaintext
134 lines
2.7 KiB
Plaintext
/*
|
|
* Copyright 2012 ST-Ericsson AB
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*
|
|
* Device Tree for the HREF+ prior to the v60 variant.
|
|
*/
|
|
|
|
#include "ste-dbx5x0.dtsi"
|
|
#include "ste-href-ab8500.dtsi"
|
|
#include "ste-href.dtsi"
|
|
|
|
/ {
|
|
gpio_keys {
|
|
button@1 {
|
|
gpios = <&tc3589x_gpio 7 0x4>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
/* Enable UART1 on this board */
|
|
uart@80121000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@80004000 {
|
|
tps61052@33 {
|
|
compatible = "tps61052";
|
|
reg = <0x33>;
|
|
};
|
|
|
|
tc35892@42 {
|
|
compatible = "toshiba,tc35892";
|
|
reg = <0x42>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tc35892_hrefprev60_mode>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
tc3589x_gpio: tc3589x_gpio {
|
|
compatible = "tc3589x-gpio";
|
|
interrupts = <0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ssp@80002000 {
|
|
/*
|
|
* On the first generation boards, this SSP/SPI port was connected
|
|
* to the AB8500.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ssp0_hrefprev60_mode>;
|
|
};
|
|
|
|
// External Micro SD slot
|
|
sdi0_per1@80126000 {
|
|
cd-gpios = <&tc3589x_gpio 3 0x4>;
|
|
};
|
|
|
|
vmmci: regulator-gpio {
|
|
gpios = <&tc3589x_gpio 18 0x4>;
|
|
enable-gpio = <&tc3589x_gpio 17 0x4>;
|
|
};
|
|
|
|
pinctrl {
|
|
/* Set this up using hogs */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ipgpio_hrefprev60_mode>;
|
|
|
|
ssp0 {
|
|
ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
|
|
hrefprev60_mux {
|
|
function = "ssp0";
|
|
groups = "ssp0_a_1";
|
|
};
|
|
hrefprev60_cfg1 {
|
|
pins = "GPIO145_C13"; /* RXD */
|
|
ste,config = <&in_pd>;
|
|
};
|
|
|
|
};
|
|
};
|
|
sdi0 {
|
|
/* This additional pin needed on early MOP500 and HREFs previous to v60 */
|
|
sdi0_default_mode: sdi0_default {
|
|
hrefprev60_mux {
|
|
function = "mc0";
|
|
groups = "mc0dat31dir_a_1";
|
|
};
|
|
hrefprev60_cfg1 {
|
|
pins = "GPIO21_AB3"; /* DAT31DIR */
|
|
ste,config = <&out_hi>;
|
|
};
|
|
|
|
};
|
|
};
|
|
tc35892 {
|
|
tc35892_hrefprev60_mode: tc35892_hrefprev60 {
|
|
hrefprev60_cfg {
|
|
pins = "GPIO217_AH12";
|
|
ste,config = <&gpio_in_pu>;
|
|
};
|
|
};
|
|
};
|
|
ipgpio {
|
|
ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
|
|
hrefprev60_mux {
|
|
function = "ipgpio";
|
|
groups = "ipgpio0_c_1", "ipgpio1_c_1";
|
|
};
|
|
hrefprev60_cfg1 {
|
|
pins = "GPIO6_AF6", "GPIO7_AG5";
|
|
ste,config = <&in_pu>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|