linux_dsm_epyc7002/drivers/tty/serial
Michal Simek 91daae0318 serial: core: Use cons->index for preferred console registration
The reason for this patch is xilinx_uartps driver which create one dynamic
instance per IP with unique major and minor combinations. drv->nr is in
this case all the time setup to 1. That means that uport->line is all the
time setup to 0 and drv->tty_driver->name_base is doing shift in name to
for example ttyPS3.

register_console() is looping over console_cmdline array and looking for
proper name/index combination which is in our case ttyPS/3.
That's why every instance of driver needs to be registered with proper
combination of name/number (ttyPS/3). Using uport->line is doing
registration with ttyPS/0 which is wrong that's why proper console index
should be used which is in cons->index field.

Also it is visible that recording console should be done based on
information about console not about the port but in most cases numbers are
the same and xilinx_uartps is only one exception now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/4a877f1c7189a7c45b59a6ebfc3de607e8758949.1567434470.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04 14:58:05 +02:00
..
8250 tty: 8250_of: Use software emulated RS485 direction control 2019-10-04 14:50:01 +02:00
cpm_uart tty: cpm_uart: drop unused iflag macro 2019-05-24 10:09:16 +02:00
jsm tty: add SPDX identifiers to Kconfig and Makefiles 2019-04-04 18:48:43 +02:00
21285.c
altera_jtaguart.c
altera_uart.c
amba-pl010.c
amba-pl011.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c serial: ar933x_uart: Fix build failure with disabled console 2019-03-19 15:37:44 +01:00
arc_uart.c
atmel_serial.c tty/serial: atmel: remove unneeded atmel_get_lines_status function 2019-09-04 12:43:55 +02:00
atmel_serial.h
bcm63xx_uart.c
clps711x.c serial: clps711x: Remove board support 2019-01-08 16:55:18 +01:00
digicolor-usart.c tty/serial: digicolor: Fix digicolor-usart already registered warning 2019-06-10 19:08:31 +02:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon-riscv-sbi.c tty/serial: use uart_console_write in the RISC-V SBL early console 2019-01-23 15:41:50 -08:00
earlycon.c
efm32-uart.c
fsl_linflexuart.c tty: serial: fix platform_no_drv_owner.cocci warnings 2019-09-04 12:44:11 +02:00
fsl_lpuart.c tty: serial: fsl_lpuart: Ignore TX/RX interrupts if DMA is enabled 2019-09-04 12:43:51 +02:00
icom.c tty: serial: Remove call to memset after pci_alloc_consistent 2019-09-04 12:43:44 +02:00
icom.h
ifx6x60.c
ifx6x60.h
imx.c serial: imx: adapt rx buffer and dma periods 2019-10-04 14:46:13 +02:00
ip22zilog.c
ip22zilog.h
Kconfig TTY/Serial driver changes for 5.4-rc1 2019-09-18 10:50:47 -07:00
kgdb_nmi.c
kgdboc.c kgdboc: disable the console lock when in kgdb 2019-07-30 17:39:39 +02:00
lantiq.c serial: lantiq: Add support for Lightning Mountain SoC 2019-09-04 12:43:53 +02:00
lpc32xx_hs.c TTY/Serial driver changes for 5.4-rc1 2019-09-18 10:50:47 -07:00
Makefile TTY/Serial driver changes for 5.4-rc1 2019-09-18 10:50:47 -07:00
max310x.c serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control 2019-09-05 09:57:44 +02:00
max3100.c
mcf.c
men_z135_uart.c drivers: Remove explicit invocations of mmiowb() 2019-04-08 12:01:02 +01:00
meson_uart.c tty: serial: meson: if no alias specified use an available id 2019-01-18 11:22:22 +01:00
milbeaut_usio.c serial: milbeaut_usio: Fix error handling in probe and remove 2019-04-29 16:20:24 +02:00
mpc52xx_uart.c
mps2-uart.c serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown 2019-01-31 19:34:10 +01:00
msm_serial.c tty: serial: msm_serial: avoid system lockup condition 2019-06-10 19:42:35 +02:00
mux.c
mvebu-uart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
mxs-auart.c serial: mxs-auart: Don't check for mctrl_gpio_to_gpiod() returning error 2019-09-04 12:43:54 +02:00
omap-serial.c
owl-uart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
pch_uart.c PCI: Move Rohm Vendor ID to generic list 2019-02-01 17:24:52 -06:00
pic32_uart.c serial: set suppress_bind_attrs flag only if builtin 2018-11-09 09:07:17 -08:00
pic32_uart.h
pmac_zilog.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
qcom_geni_serial.c tty: serial: qcom_geni_serial: use devm_platform_ioremap_resource() to simplify code 2019-09-04 12:43:50 +02:00
rda-uart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
rp2.c
sa1100.c serial: sa1100: add note about modem control signals 2019-06-04 12:56:33 +01:00
samsung.c tty: serial: samsung: Enable baud clock during initialisation 2019-02-19 13:42:08 +01:00
samsung.h
sb1250-duart.c
sc16is7xx.c Merge 5.1-rc6 into tty-next 2019-04-21 23:20:08 +02:00
sccnxp.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
serial_core.c serial: core: Use cons->index for preferred console registration 2019-10-04 14:58:05 +02:00
serial_mctrl_gpio.c serial: mctrl_gpio: Use gpiod flags directly 2019-09-04 12:43:55 +02:00
serial_mctrl_gpio.h serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib 2019-09-04 12:43:50 +02:00
serial_txx9.c drivers: Remove explicit invocations of mmiowb() 2019-04-08 12:01:02 +01:00
serial-tegra.c serial: tegra: Add PIO mode support 2019-09-05 10:00:05 +02:00
sh-sci.c serial: sh-sci: Don't check for mctrl_gpio_to_gpiod() returning error 2019-09-04 12:43:54 +02:00
sh-sci.h
sifive.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
sirfsoc_uart.c
sirfsoc_uart.h
sprd_serial.c serial: sprd: Add polling IO support 2019-10-04 14:50:01 +02:00
st-asc.c
stm32-usart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
stm32-usart.h serial: stm32: add support of RX FIFO threshold 2019-06-21 11:17:36 +02:00
suncore.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
sunhv.c sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg 2019-06-13 14:04:37 -07:00
sunsab.c
sunsab.h
sunsu.c TTY/Serial driver patches for 4.21-rc1 2018-12-28 20:33:54 -08:00
sunzilog.c
sunzilog.h
tegra-tcu.c serial: Add Tegra Combined UART driver 2019-01-30 09:31:31 +01:00
timbuart.c
timbuart.h
uartlite.c serial-uartlite: fix null pointer dereference on pointer port 2018-11-27 09:08:15 +01:00
ucc_uart.c docs: serial: move it to the driver-api 2019-07-15 11:03:03 -03:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c xilinx_uartps.c: suppress "may be used uninitialised" warning 2019-09-04 12:43:49 +02:00
zs.c
zs.h