AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 09:10:55 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
91a99dfc6b
linux_dsm_epyc7002/arch/arm/mach-pxa/mioa701.c
Russell King cc155c6f2c [ARM] pxa: allow platforms to control which uarts are registered 
For some platforms, it is inappropriate to register all PXA UARTs.
In some cases, the UARTs may not be used, and in others we may want
to avoid registering the UARTs to allow other drivers (eg, FICP) to
make use of the UART.

In addition, a while back there was a request to be able to pass
platform data to the UART driver.

This patch enables all of this by providing functions platforms can
call to register each individual UART.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:55 +08:00

839 lines
21 KiB
C
Raw Blame History

/*
* Handles the Mitac Mio A701 Board
*
* Copyright (C) 2008 Robert Jarzmik
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
#include <linux/pwm_backlight.h>
#include <linux/rtc.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pda_power.h>
#include <linux/power_supply.h>
#include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
#include <mach/regs-rtc.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <media/soc_camera.h>
#include <mach/mioa701.h>
#include "generic.h"
#include "devices.h"
static unsigned long mioa701_pin_config[] = {
/* Mio global */
MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
/* Backlight PWM 0 */
GPIO16_PWM0_OUT,
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
/* USB */
MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
/* QCI */
GPIO12_CIF_DD_7,
GPIO17_CIF_DD_6,
GPIO50_CIF_DD_3,
GPIO51_CIF_DD_2,
GPIO52_CIF_DD_4,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO55_CIF_DD_1,
GPIO81_CIF_DD_0,
GPIO82_CIF_DD_5,
GPIO84_CIF_FV,
GPIO85_CIF_LV,
/* Bluetooth */
MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
GPIO44_BTUART_CTS,
GPIO42_BTUART_RXD,
GPIO45_BTUART_RTS,
GPIO43_BTUART_TXD,
MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
/* GPS */
MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* GSM */
MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
GPIO34_FFUART_RXD,
GPIO35_FFUART_CTS,
GPIO36_FFUART_DCD,
GPIO37_FFUART_DSR,
GPIO39_FFUART_TXD,
GPIO40_FFUART_DTR,
GPIO41_FFUART_RTS,
/* Sound */
GPIO89_AC97_SYSCLK,
MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
/* Leds */
MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
/* Keyboard */
MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
GPIO100_KP_MKIN_0,
GPIO101_KP_MKIN_1,
GPIO102_KP_MKIN_2,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* Unknown */
MFP_CFG_IN(GPIO20, AF0),
MFP_CFG_IN(GPIO21, AF0),
MFP_CFG_IN(GPIO33, AF0),
MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
MFP_CFG_IN(GPIO96, AF0),
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
};
#define MIO_GPIO_IN(num, _desc) \
{ .gpio = (num), .dir = 0, .desc = (_desc) }
#define MIO_GPIO_OUT(num, _init, _desc) \
{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
struct gpio_ress {
unsigned gpio : 8;
unsigned dir : 1;
unsigned init : 1;
char *desc;
};
static int mio_gpio_request(struct gpio_ress *gpios, int size)
{
int i, rc = 0;
int gpio;
int dir;
for (i = 0; (!rc) && (i < size); i++) {
gpio = gpios[i].gpio;
dir = gpios[i].dir;
rc = gpio_request(gpio, gpios[i].desc);
if (rc) {
printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
gpio, gpios[i].desc, rc);
continue;
}
if (dir)
gpio_direction_output(gpio, gpios[i].init);
else
gpio_direction_input(gpio);
}
while ((rc) && (--i >= 0))
gpio_free(gpios[i].gpio);
return rc;
}
static void mio_gpio_free(struct gpio_ress *gpios, int size)
{
int i;
for (i = 0; i < size; i++)
gpio_free(gpios[i].gpio);
}
/* LCD Screen and Backlight */
static struct platform_pwm_backlight_data mioa701_backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
.pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */
};
/*
* LTM0305A776C LCD panel timings
*
* see:
* - the LTM0305A776C datasheet,
* - and the PXA27x Programmers' manual
*/
static struct pxafb_mode_info mioa701_ltm0305a776c = {
.pixclock = 220000, /* CLK=4.545 MHz */
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.vsync_len = 2,
.left_margin = 6,
.right_margin = 4,
.upper_margin = 5,
.lower_margin = 3,
};
static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
{
gpio_set_value(GPIO87_LCD_POWER, on);
}
static struct pxafb_mach_info mioa701_pxafb_info = {
.modes = &mioa701_ltm0305a776c,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
.pxafb_lcd_power = mioa701_lcd_power,
};
/*
* Keyboard configuration
*/
static unsigned int mioa701_matrix_keys[] = {
KEY(0, 0, KEY_UP),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_MEDIA),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_ENTER),
KEY(1, 2, KEY_CONNECT), /* GPS key */
KEY(2, 0, KEY_LEFT),
KEY(2, 1, KEY_PHONE), /* Phone Green key */
KEY(2, 2, KEY_CAMERA) /* Camera key */
};
static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
.matrix_key_rows = 3,
.matrix_key_cols = 3,
.matrix_key_map = mioa701_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
};
/*
* GPIO Key Configuration
*/
#define MIO_KEY(key, _gpio, _desc, _wakeup) \
{ .code = (key), .gpio = (_gpio), .active_low = 0, \
.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
static struct gpio_keys_button mioa701_button_table[] = {
MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
};
static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
.buttons = mioa701_button_table,
.nbuttons = ARRAY_SIZE(mioa701_button_table),
};
/*
* Leds and vibrator
*/
#define ONE_LED(_gpio, _name) \
{ .gpio = (_gpio), .name = (_name), .active_low = true }
static struct gpio_led gpio_leds[] = {
ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
/*
* GSM Sagem XS200 chip
*
* GSM handling was purged from kernel. For history, this is the way to go :
* - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
* GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
* - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
* GPIO24_GSM_MOD_RESET_CMD = 0
* - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
* GPIO88_GSM_nMOD_ON_CMD = 1
* - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
* GPIO90_GSM_nMOD_OFF_CMD = 1
*/
static int is_gsm_on(void)
{
int is_on;
is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
return is_on;
}
irqreturn_t gsm_on_irq(int irq, void *p)
{
printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
is_gsm_on() ? "on" : "off");
return IRQ_HANDLED;
}
struct gpio_ress gsm_gpios[] = {
MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
};
static int __init gsm_init(void)
{
int rc;
rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
if (rc)
goto err_gpio;
rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"GSM XS200 Power Irq", NULL);
if (rc)
goto err_irq;
gpio_set_wake(GPIO113_GSM_EVENT, 1);
return 0;
err_irq:
printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
err_gpio:
printk(KERN_ERR "Mioa701: gsm not available\n");
return rc;
}
static void gsm_exit(void)
{
free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
}
/*
* Bluetooth BRF6150 chip
*
* BT handling was purged from kernel. For history, this is the way to go :
* - turn on : GPIO83_BT_ON = 1
* - turn off : GPIO83_BT_ON = 0
*/
/*
* GPS Sirf Star III chip
*
* GPS handling was purged from kernel. For history, this is the way to go :
* - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
* GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
* - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
* - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
*/
/*
* USB UDC
*/
static int is_usb_connected(void)
{
return !gpio_get_value(GPIO13_nUSB_DETECT);
}
static struct pxa2xx_udc_mach_info mioa701_udc_info = {
.udc_is_connected = is_usb_connected,
.gpio_pullup = GPIO22_USB_ENABLE,
};
struct gpio_vbus_mach_info gpio_vbus_data = {
.gpio_vbus = GPIO13_nUSB_DETECT,
.gpio_vbus_inverted = 1,
.gpio_pullup = -1,
};
/*
* SDIO/MMC Card controller
*/
/**
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
static struct pxamci_platform_data mioa701_mci_info = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO15_SDIO_INSERT,
.gpio_card_ro = GPIO78_SDIO_RO,
.gpio_power = GPIO91_SDIO_EN,
};
/* FlashRAM */
static struct resource strataflash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data strataflash_data = {
.width = 2,
/* .set_vpp = mioa701_set_vpp, */
};
static struct platform_device strataflash = {
.name = "physmap-flash",
.id = -1,
.resource = &strataflash_resource,
.num_resources = 1,
.dev = {
.platform_data = &strataflash_data,
},
};
/*
* Suspend/Resume bootstrap management
*
* MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
* this sequence is as follows :
* - disables interrupts
* - initialize SDRAM (self refresh RAM into active RAM)
* - initialize GPIOs (depends on value at 0xa020b020)
* - initialize coprossessors
* - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
* - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
* - else do a resume, ie. jump to addr 0xa0100000
*/
#define RESUME_ENABLE_ADDR 0xa020b000
#define RESUME_ENABLE_VAL 0x0f0f0f0f
#define RESUME_BT_ADDR 0xa020b020
#define RESUME_UNKNOWN_ADDR 0xa020b024
#define RESUME_VECTOR_ADDR 0xa0100000
#define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4
static u32 *save_buffer;
static void install_bootstrap(void)
{
int i;
u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR);
u32 *src = &mioa701_bootstrap;
for (i = 0; i < BOOTSTRAP_WORDS; i++)
rom_bootstrap[i] = src[i];
}
static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
{
int i = 0, is_bt_on;
u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
/* Devices prepare suspend */
is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
for (i = 0; i < BOOTSTRAP_WORDS; i++)
save_buffer[i] = mem_resume_vector[i];
save_buffer[i++] = *mem_resume_enabler;
save_buffer[i++] = *mem_resume_bt;
save_buffer[i++] = *mem_resume_unknown;
*mem_resume_enabler = RESUME_ENABLE_VAL;
*mem_resume_bt = is_bt_on;
install_bootstrap();
return 0;
}
static int mioa701_sys_resume(struct sys_device *sysdev)
{
int i = 0;
u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
for (i = 0; i < BOOTSTRAP_WORDS; i++)
mem_resume_vector[i] = save_buffer[i];
*mem_resume_enabler = save_buffer[i++];
*mem_resume_bt = save_buffer[i++];
*mem_resume_unknown = save_buffer[i++];
return 0;
}
static struct sysdev_class mioa701_sysclass = {
.name = "mioa701",
};
static struct sys_device sysdev_bootstrap = {
.cls = &mioa701_sysclass,
};
static struct sysdev_driver driver_bootstrap = {
.suspend = &mioa701_sys_suspend,
.resume = &mioa701_sys_resume,
};
static int __init bootstrap_init(void)
{
int rc;
int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
rc = sysdev_class_register(&mioa701_sysclass);
if (rc) {
printk(KERN_ERR "Failed registering mioa701 sys class\n");
return -ENODEV;
}
rc = sysdev_register(&sysdev_bootstrap);
if (rc) {
printk(KERN_ERR "Failed registering mioa701 sys device\n");
return -ENODEV;
}
rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
if (rc) {
printk(KERN_ERR "Failed registering PMU sys driver\n");
return -ENODEV;
}
save_buffer = kmalloc(save_size, GFP_KERNEL);
if (!save_buffer)
return -ENOMEM;
printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
save_size);
return 0;
}
static void bootstrap_exit(void)
{
kfree(save_buffer);
sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
sysdev_unregister(&sysdev_bootstrap);
sysdev_class_unregister(&mioa701_sysclass);
printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
"resume !!!\n");
}
/*
* Power Supply
*/
static char *supplicants[] = {
"mioa701_battery"
};
static int is_ac_connected(void)
{
return gpio_get_value(GPIO96_AC_DETECT);
}
static void mioa701_set_charge(int flags)
{
gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
}
static struct pda_power_pdata power_pdata = {
.is_ac_online = is_ac_connected,
.is_usb_online = is_usb_connected,
.set_charge = mioa701_set_charge,
.supplied_to = supplicants,
.num_supplicants = ARRAY_SIZE(supplicants),
};
static struct resource power_resources[] = {
[0] = {
.name = "ac",
.start = gpio_to_irq(GPIO96_AC_DETECT),
.end = gpio_to_irq(GPIO96_AC_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
[1] = {
.name = "usb",
.start = gpio_to_irq(GPIO13_nUSB_DETECT),
.end = gpio_to_irq(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
};
static struct platform_device power_dev = {
.name = "pda-power",
.id = -1,
.resource = power_resources,
.num_resources = ARRAY_SIZE(power_resources),
.dev = {
.platform_data = &power_pdata,
},
};
static struct wm97xx_batt_info mioa701_battery_data = {
.batt_aux = WM97XX_AUX_ID1,
.temp_aux = -1,
.charge_gpio = -1,
.min_voltage = 0xc00,
.max_voltage = 0xfc0,
.batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
.batt_div = 1,
.batt_mult = 1,
.batt_name = "mioa701_battery",
};
/*
* Voltage regulation
*/
static struct regulator_consumer_supply max1586_consumers[] = {
{
.supply = "vcc_core",
}
};
static struct regulator_init_data max1586_v3_info = {
.constraints = {
.name = "vcc_core range",
.min_uV = 1000000,
.max_uV = 1705000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
.consumer_supplies = max1586_consumers,
};
static struct max1586_subdev_data max1586_subdevs[] = {
{ .name = "vcc_core", .id = MAX1586_V3,
.platform_data = &max1586_v3_info },
};
static struct max1586_platform_data max1586_info = {
.subdevs = max1586_subdevs,
.num_subdevs = ARRAY_SIZE(max1586_subdevs),
.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
};
/*
* Camera interface
*/
struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
.mclk_10khz = 5000,
};
static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
{
I2C_BOARD_INFO("max1586", 0x14),
.platform_data = &max1586_info,
},
};
/* Board I2C devices. */
static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
{
I2C_BOARD_INFO("mt9m111", 0x5d),
},
};
static struct soc_camera_link iclink = {
.bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
.board_info = &mioa701_i2c_devices[0],
.i2c_adapter_id = 0,
.module_name = "mt9m111",
};
struct i2c_pxa_platform_data i2c_pdata = {
.fast_mode = 1,
};
static pxa2xx_audio_ops_t mioa701_ac97_info = {
.reset_gpio = 95,
};
/*
* Mio global
*/
/* Devices */
#define MIO_PARENT_DEV(var, strname, tparent, pdata) \
static struct platform_device var = { \
.name = strname, \
.id = -1, \
.dev = { \
.platform_data = pdata, \
.parent = tparent, \
}, \
};
#define MIO_SIMPLE_DEV(var, strname, pdata) \
MIO_PARENT_DEV(var, strname, NULL, pdata)
MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data)
MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev,
&mioa701_backlight_data);
MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
&mioa701_backlight,
&mioa701_led,
&pxa2xx_pcm,
&mioa701_sound,
&power_dev,
&strataflash,
&gpio_vbus,
&mioa701_camera,
&mioa701_board,
};
static void mioa701_machine_exit(void);
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
arm_machine_restart('s', NULL);
}
static void mioa701_restart(char c, const char *cmd)
{
mioa701_machine_exit();
arm_machine_restart('s', cmd);
}
static struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
};
static void __init mioa701_machine_init(void)
{
PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
RTTR = 32768 - 1; /* Reset crazy WinCE value */
UP2OCR = UP2OCR_HXOE;
pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
set_pxa_fb_info(&mioa701_pxafb_info);
mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
}
static void mioa701_machine_exit(void)
{
bootstrap_exit();
gsm_exit();
}
MACHINE_START(MIOA701, "MIO A701")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = &pxa_map_io,
.init_irq = &pxa27x_init_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink