AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 20:24:29 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
913618185e
linux_dsm_epyc7002/drivers/mtd/nand/nuc900_nand.c
Brian Norris 3dad2344e9 mtd: nand: force NAND_CMD_READID onto 8-bit bus 
The NAND command helpers tend to automatically shift the column address
for x16 bus devices, since most commands expect a word address, not a
byte address. The Read ID command, however, expects an 8-bit address
(i.e., 0x00, 0x20, or 0x40 should not be translated to 0x00, 0x10, or
0x20).

This fixes the column address for a few drivers which imitate the
nand_base defaults. Note that I don't touch sh_flctl.c, since it already
handles this problem slightly differently (note its comment "READID is
always performed using an 8-bit bus").

I have not tested this patch, as I only have x8 parts up for testing at
this point. Hopefully that can change soon...

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-By: Pekon Gupta <pekon@ti.com>
2014-03-10 22:42:22 -07:00

313 lines
6.7 KiB
C
Raw Blame History

/*
* Copyright © 2009 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation;version 2 of the License.
*
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#define REG_FMICSR 0x00
#define REG_SMCSR 0xa0
#define REG_SMISR 0xac
#define REG_SMCMD 0xb0
#define REG_SMADDR 0xb4
#define REG_SMDATA 0xb8
#define RESET_FMI 0x01
#define NAND_EN 0x08
#define READYBUSY (0x01 << 18)
#define SWRST 0x01
#define PSIZE (0x01 << 3)
#define DMARWEN (0x03 << 1)
#define BUSWID (0x01 << 4)
#define ECC4EN (0x01 << 5)
#define WP (0x01 << 24)
#define NANDCS (0x01 << 25)
#define ENDADDR (0x01 << 31)
#define read_data_reg(dev) \
__raw_readl((dev)->reg + REG_SMDATA)
#define write_data_reg(dev, val) \
__raw_writel((val), (dev)->reg + REG_SMDATA)
#define write_cmd_reg(dev, val) \
__raw_writel((val), (dev)->reg + REG_SMCMD)
#define write_addr_reg(dev, val) \
__raw_writel((val), (dev)->reg + REG_SMADDR)
struct nuc900_nand {
struct mtd_info mtd;
struct nand_chip chip;
void __iomem *reg;
struct clk *clk;
spinlock_t lock;
};
static const struct mtd_partition partitions[] = {
{
.name = "NAND FS 0",
.offset = 0,
.size = 8 * 1024 * 1024
},
{
.name = "NAND FS 1",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
}
};
static unsigned char nuc900_nand_read_byte(struct mtd_info *mtd)
{
unsigned char ret;
struct nuc900_nand *nand;
nand = container_of(mtd, struct nuc900_nand, mtd);
ret = (unsigned char)read_data_reg(nand);
return ret;
}
static void nuc900_nand_read_buf(struct mtd_info *mtd,
unsigned char *buf, int len)
{
int i;
struct nuc900_nand *nand;
nand = container_of(mtd, struct nuc900_nand, mtd);
for (i = 0; i < len; i++)
buf[i] = (unsigned char)read_data_reg(nand);
}
static void nuc900_nand_write_buf(struct mtd_info *mtd,
const unsigned char *buf, int len)
{
int i;
struct nuc900_nand *nand;
nand = container_of(mtd, struct nuc900_nand, mtd);
for (i = 0; i < len; i++)
write_data_reg(nand, buf[i]);
}
static int nuc900_check_rb(struct nuc900_nand *nand)
{
unsigned int val;
spin_lock(&nand->lock);
val = __raw_readl(REG_SMISR);
val &= READYBUSY;
spin_unlock(&nand->lock);
return val;
}
static int nuc900_nand_devready(struct mtd_info *mtd)
{
struct nuc900_nand *nand;
int ready;
nand = container_of(mtd, struct nuc900_nand, mtd);
ready = (nuc900_check_rb(nand)) ? 1 : 0;
return ready;
}
static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
{
register struct nand_chip *chip = mtd->priv;
struct nuc900_nand *nand;
nand = container_of(mtd, struct nuc900_nand, mtd);
if (command == NAND_CMD_READOOB) {
column += mtd->writesize;
command = NAND_CMD_READ0;
}
write_cmd_reg(nand, command & 0xff);
if (column != -1 || page_addr != -1) {
if (column != -1) {
if (chip->options & NAND_BUSWIDTH_16 &&
!nand_opcode_8bits(command))
column >>= 1;
write_addr_reg(nand, column);
write_addr_reg(nand, column >> 8 | ENDADDR);
}
if (page_addr != -1) {
write_addr_reg(nand, page_addr);
if (chip->chipsize > (128 << 20)) {
write_addr_reg(nand, page_addr >> 8);
write_addr_reg(nand, page_addr >> 16 | ENDADDR);
} else {
write_addr_reg(nand, page_addr >> 8 | ENDADDR);
}
}
}
switch (command) {
case NAND_CMD_CACHEDPROG:
case NAND_CMD_PAGEPROG:
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
case NAND_CMD_SEQIN:
case NAND_CMD_RNDIN:
case NAND_CMD_STATUS:
return;
case NAND_CMD_RESET:
if (chip->dev_ready)
break;
udelay(chip->chip_delay);
write_cmd_reg(nand, NAND_CMD_STATUS);
write_cmd_reg(nand, command);
while (!nuc900_check_rb(nand))
;
return;
case NAND_CMD_RNDOUT:
write_cmd_reg(nand, NAND_CMD_RNDOUTSTART);
return;
case NAND_CMD_READ0:
write_cmd_reg(nand, NAND_CMD_READSTART);
default:
if (!chip->dev_ready) {
udelay(chip->chip_delay);
return;
}
}
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
ndelay(100);
while (!chip->dev_ready(mtd))
;
}
static void nuc900_nand_enable(struct nuc900_nand *nand)
{
unsigned int val;
spin_lock(&nand->lock);
__raw_writel(RESET_FMI, (nand->reg + REG_FMICSR));
val = __raw_readl(nand->reg + REG_FMICSR);
if (!(val & NAND_EN))
__raw_writel(val | NAND_EN, REG_FMICSR);
val = __raw_readl(nand->reg + REG_SMCSR);
val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS);
val |= WP;
__raw_writel(val, nand->reg + REG_SMCSR);
spin_unlock(&nand->lock);
}
static int nuc900_nand_probe(struct platform_device *pdev)
{
struct nuc900_nand *nuc900_nand;
struct nand_chip *chip;
struct resource *res;
nuc900_nand = devm_kzalloc(&pdev->dev, sizeof(struct nuc900_nand),
GFP_KERNEL);
if (!nuc900_nand)
return -ENOMEM;
chip = &(nuc900_nand->chip);
nuc900_nand->mtd.priv = chip;
nuc900_nand->mtd.owner = THIS_MODULE;
spin_lock_init(&nuc900_nand->lock);
nuc900_nand->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(nuc900_nand->clk))
return -ENOENT;
clk_enable(nuc900_nand->clk);
chip->cmdfunc = nuc900_nand_command_lp;
chip->dev_ready = nuc900_nand_devready;
chip->read_byte = nuc900_nand_read_byte;
chip->write_buf = nuc900_nand_write_buf;
chip->read_buf = nuc900_nand_read_buf;
chip->chip_delay = 50;
chip->options = 0;
chip->ecc.mode = NAND_ECC_SOFT;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(nuc900_nand->reg))
return PTR_ERR(nuc900_nand->reg);
nuc900_nand_enable(nuc900_nand);
if (nand_scan(&(nuc900_nand->mtd), 1))
return -ENXIO;
mtd_device_register(&(nuc900_nand->mtd), partitions,
ARRAY_SIZE(partitions));
platform_set_drvdata(pdev, nuc900_nand);
return 0;
}
static int nuc900_nand_remove(struct platform_device *pdev)
{
struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
nand_release(&nuc900_nand->mtd);
clk_disable(nuc900_nand->clk);
return 0;
}
static struct platform_driver nuc900_nand_driver = {
.probe = nuc900_nand_probe,
.remove = nuc900_nand_remove,
.driver = {
.name = "nuc900-fmi",
.owner = THIS_MODULE,
},
};
module_platform_driver(nuc900_nand_driver);
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910/NUC9xx nand driver!");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:nuc900-fmi");
Reference in New Issue View Git Blame Copy Permalink