mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 12:17:31 +07:00
d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
335 lines
8.1 KiB
C
335 lines
8.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensor driver
|
|
*
|
|
* Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
|
|
*
|
|
* Data sheets:
|
|
* http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1710fvc-e.pdf
|
|
* http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1715fvc-e.pdf
|
|
* http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1721fvc-e.pdf
|
|
* http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf
|
|
* http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1751fvi-e.pdf
|
|
*
|
|
* 7-bit I2C slave addresses:
|
|
* 0x23 (ADDR pin low)
|
|
* 0x5C (ADDR pin high)
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/module.h>
|
|
|
|
#define BH1750_POWER_DOWN 0x00
|
|
#define BH1750_ONE_TIME_H_RES_MODE 0x20 /* auto-mode for BH1721 */
|
|
#define BH1750_CHANGE_INT_TIME_H_BIT 0x40
|
|
#define BH1750_CHANGE_INT_TIME_L_BIT 0x60
|
|
|
|
enum {
|
|
BH1710,
|
|
BH1721,
|
|
BH1750,
|
|
};
|
|
|
|
struct bh1750_chip_info;
|
|
struct bh1750_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
const struct bh1750_chip_info *chip_info;
|
|
u16 mtreg;
|
|
};
|
|
|
|
struct bh1750_chip_info {
|
|
u16 mtreg_min;
|
|
u16 mtreg_max;
|
|
u16 mtreg_default;
|
|
int mtreg_to_usec;
|
|
int mtreg_to_scale;
|
|
|
|
/*
|
|
* For BH1710/BH1721 all possible integration time values won't fit
|
|
* into one page so displaying is limited to every second one.
|
|
* Note, that user can still write proper values which were not
|
|
* listed.
|
|
*/
|
|
int inc;
|
|
|
|
u16 int_time_low_mask;
|
|
u16 int_time_high_mask;
|
|
};
|
|
|
|
static const struct bh1750_chip_info bh1750_chip_info_tbl[] = {
|
|
[BH1710] = { 140, 1022, 300, 400, 250000000, 2, 0x001F, 0x03E0 },
|
|
[BH1721] = { 140, 1020, 300, 400, 250000000, 2, 0x0010, 0x03E0 },
|
|
[BH1750] = { 31, 254, 69, 1740, 57500000, 1, 0x001F, 0x00E0 },
|
|
};
|
|
|
|
static int bh1750_change_int_time(struct bh1750_data *data, int usec)
|
|
{
|
|
int ret;
|
|
u16 val;
|
|
u8 regval;
|
|
const struct bh1750_chip_info *chip_info = data->chip_info;
|
|
|
|
if ((usec % chip_info->mtreg_to_usec) != 0)
|
|
return -EINVAL;
|
|
|
|
val = usec / chip_info->mtreg_to_usec;
|
|
if (val < chip_info->mtreg_min || val > chip_info->mtreg_max)
|
|
return -EINVAL;
|
|
|
|
ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
regval = (val & chip_info->int_time_high_mask) >> 5;
|
|
ret = i2c_smbus_write_byte(data->client,
|
|
BH1750_CHANGE_INT_TIME_H_BIT | regval);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
regval = val & chip_info->int_time_low_mask;
|
|
ret = i2c_smbus_write_byte(data->client,
|
|
BH1750_CHANGE_INT_TIME_L_BIT | regval);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->mtreg = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bh1750_read(struct bh1750_data *data, int *val)
|
|
{
|
|
int ret;
|
|
__be16 result;
|
|
const struct bh1750_chip_info *chip_info = data->chip_info;
|
|
unsigned long delay = chip_info->mtreg_to_usec * data->mtreg;
|
|
|
|
/*
|
|
* BH1721 will enter continuous mode on receiving this command.
|
|
* Note, that this eliminates need for bh1750_resume().
|
|
*/
|
|
ret = i2c_smbus_write_byte(data->client, BH1750_ONE_TIME_H_RES_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usleep_range(delay + 15000, delay + 40000);
|
|
|
|
ret = i2c_master_recv(data->client, (char *)&result, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = be16_to_cpu(result);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bh1750_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
int ret, tmp;
|
|
struct bh1750_data *data = iio_priv(indio_dev);
|
|
const struct bh1750_chip_info *chip_info = data->chip_info;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
switch (chan->type) {
|
|
case IIO_LIGHT:
|
|
mutex_lock(&data->lock);
|
|
ret = bh1750_read(data, val);
|
|
mutex_unlock(&data->lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SCALE:
|
|
tmp = chip_info->mtreg_to_scale / data->mtreg;
|
|
*val = tmp / 1000000;
|
|
*val2 = tmp % 1000000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
*val = 0;
|
|
*val2 = chip_info->mtreg_to_usec * data->mtreg;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int bh1750_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
int ret;
|
|
struct bh1750_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = bh1750_change_int_time(data, val2);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static ssize_t bh1750_show_int_time_available(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int i;
|
|
size_t len = 0;
|
|
struct bh1750_data *data = iio_priv(dev_to_iio_dev(dev));
|
|
const struct bh1750_chip_info *chip_info = data->chip_info;
|
|
|
|
for (i = chip_info->mtreg_min; i <= chip_info->mtreg_max; i += chip_info->inc)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ",
|
|
chip_info->mtreg_to_usec * i);
|
|
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEV_ATTR_INT_TIME_AVAIL(bh1750_show_int_time_available);
|
|
|
|
static struct attribute *bh1750_attributes[] = {
|
|
&iio_dev_attr_integration_time_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group bh1750_attribute_group = {
|
|
.attrs = bh1750_attributes,
|
|
};
|
|
|
|
static const struct iio_info bh1750_info = {
|
|
.attrs = &bh1750_attribute_group,
|
|
.read_raw = bh1750_read_raw,
|
|
.write_raw = bh1750_write_raw,
|
|
};
|
|
|
|
static const struct iio_chan_spec bh1750_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_INT_TIME)
|
|
}
|
|
};
|
|
|
|
static int bh1750_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret, usec;
|
|
struct bh1750_data *data;
|
|
struct iio_dev *indio_dev;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE))
|
|
return -EOPNOTSUPP;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
data->chip_info = &bh1750_chip_info_tbl[id->driver_data];
|
|
|
|
usec = data->chip_info->mtreg_to_usec * data->chip_info->mtreg_default;
|
|
ret = bh1750_change_int_time(data, usec);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_init(&data->lock);
|
|
indio_dev->info = &bh1750_info;
|
|
indio_dev->name = id->name;
|
|
indio_dev->channels = bh1750_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(bh1750_channels);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
return iio_device_register(indio_dev);
|
|
}
|
|
|
|
static int bh1750_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct bh1750_data *data = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
mutex_lock(&data->lock);
|
|
i2c_smbus_write_byte(client, BH1750_POWER_DOWN);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused bh1750_suspend(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct bh1750_data *data =
|
|
iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
|
|
|
|
/*
|
|
* This is mainly for BH1721 which doesn't enter power down
|
|
* mode automatically.
|
|
*/
|
|
mutex_lock(&data->lock);
|
|
ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(bh1750_pm_ops, bh1750_suspend, NULL);
|
|
|
|
static const struct i2c_device_id bh1750_id[] = {
|
|
{ "bh1710", BH1710 },
|
|
{ "bh1715", BH1750 },
|
|
{ "bh1721", BH1721 },
|
|
{ "bh1750", BH1750 },
|
|
{ "bh1751", BH1750 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, bh1750_id);
|
|
|
|
static const struct of_device_id bh1750_of_match[] = {
|
|
{ .compatible = "rohm,bh1710", },
|
|
{ .compatible = "rohm,bh1715", },
|
|
{ .compatible = "rohm,bh1721", },
|
|
{ .compatible = "rohm,bh1750", },
|
|
{ .compatible = "rohm,bh1751", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bh1750_of_match);
|
|
|
|
static struct i2c_driver bh1750_driver = {
|
|
.driver = {
|
|
.name = "bh1750",
|
|
.of_match_table = bh1750_of_match,
|
|
.pm = &bh1750_pm_ops,
|
|
},
|
|
.probe = bh1750_probe,
|
|
.remove = bh1750_remove,
|
|
.id_table = bh1750_id,
|
|
|
|
};
|
|
module_i2c_driver(bh1750_driver);
|
|
|
|
MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
|
|
MODULE_DESCRIPTION("ROHM BH1710/BH1715/BH1721/BH1750/BH1751 als driver");
|
|
MODULE_LICENSE("GPL v2");
|