mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 18:10:52 +07:00
bd0b9ac405
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
1082 lines
27 KiB
C
1082 lines
27 KiB
C
/*
|
|
* driver/mfd/asic3.c
|
|
*
|
|
* Compaq ASIC3 support.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Copyright 2001 Compaq Computer Corporation.
|
|
* Copyright 2004-2005 Phil Blundell
|
|
* Copyright 2007-2008 OpenedHand Ltd.
|
|
*
|
|
* Authors: Phil Blundell <pb@handhelds.org>,
|
|
* Samuel Ortiz <sameo@openedhand.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/export.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/mfd/asic3.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/ds1wm.h>
|
|
#include <linux/mfd/tmio.h>
|
|
|
|
enum {
|
|
ASIC3_CLOCK_SPI,
|
|
ASIC3_CLOCK_OWM,
|
|
ASIC3_CLOCK_PWM0,
|
|
ASIC3_CLOCK_PWM1,
|
|
ASIC3_CLOCK_LED0,
|
|
ASIC3_CLOCK_LED1,
|
|
ASIC3_CLOCK_LED2,
|
|
ASIC3_CLOCK_SD_HOST,
|
|
ASIC3_CLOCK_SD_BUS,
|
|
ASIC3_CLOCK_SMBUS,
|
|
ASIC3_CLOCK_EX0,
|
|
ASIC3_CLOCK_EX1,
|
|
};
|
|
|
|
struct asic3_clk {
|
|
int enabled;
|
|
unsigned int cdex;
|
|
unsigned long rate;
|
|
};
|
|
|
|
#define INIT_CDEX(_name, _rate) \
|
|
[ASIC3_CLOCK_##_name] = { \
|
|
.cdex = CLOCK_CDEX_##_name, \
|
|
.rate = _rate, \
|
|
}
|
|
|
|
static struct asic3_clk asic3_clk_init[] __initdata = {
|
|
INIT_CDEX(SPI, 0),
|
|
INIT_CDEX(OWM, 5000000),
|
|
INIT_CDEX(PWM0, 0),
|
|
INIT_CDEX(PWM1, 0),
|
|
INIT_CDEX(LED0, 0),
|
|
INIT_CDEX(LED1, 0),
|
|
INIT_CDEX(LED2, 0),
|
|
INIT_CDEX(SD_HOST, 24576000),
|
|
INIT_CDEX(SD_BUS, 12288000),
|
|
INIT_CDEX(SMBUS, 0),
|
|
INIT_CDEX(EX0, 32768),
|
|
INIT_CDEX(EX1, 24576000),
|
|
};
|
|
|
|
struct asic3 {
|
|
void __iomem *mapping;
|
|
unsigned int bus_shift;
|
|
unsigned int irq_nr;
|
|
unsigned int irq_base;
|
|
spinlock_t lock;
|
|
u16 irq_bothedge[4];
|
|
struct gpio_chip gpio;
|
|
struct device *dev;
|
|
void __iomem *tmio_cnf;
|
|
|
|
struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
|
|
};
|
|
|
|
static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset);
|
|
|
|
void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 value)
|
|
{
|
|
iowrite16(value, asic->mapping +
|
|
(reg >> asic->bus_shift));
|
|
}
|
|
EXPORT_SYMBOL_GPL(asic3_write_register);
|
|
|
|
u32 asic3_read_register(struct asic3 *asic, unsigned int reg)
|
|
{
|
|
return ioread16(asic->mapping +
|
|
(reg >> asic->bus_shift));
|
|
}
|
|
EXPORT_SYMBOL_GPL(asic3_read_register);
|
|
|
|
static void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set)
|
|
{
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, reg);
|
|
if (set)
|
|
val |= bits;
|
|
else
|
|
val &= ~bits;
|
|
asic3_write_register(asic, reg, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
/* IRQs */
|
|
#define MAX_ASIC_ISR_LOOPS 20
|
|
#define ASIC3_GPIO_BASE_INCR \
|
|
(ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE)
|
|
|
|
static void asic3_irq_flip_edge(struct asic3 *asic,
|
|
u32 base, int bit)
|
|
{
|
|
u16 edge;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
edge = asic3_read_register(asic,
|
|
base + ASIC3_GPIO_EDGE_TRIGGER);
|
|
edge ^= bit;
|
|
asic3_write_register(asic,
|
|
base + ASIC3_GPIO_EDGE_TRIGGER, edge);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_irq_demux(struct irq_desc *desc)
|
|
{
|
|
struct asic3 *asic = irq_desc_get_handler_data(desc);
|
|
struct irq_data *data = irq_desc_get_irq_data(desc);
|
|
int iter, i;
|
|
unsigned long flags;
|
|
|
|
data->chip->irq_ack(data);
|
|
|
|
for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
|
|
u32 status;
|
|
int bank;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
status = asic3_read_register(asic,
|
|
ASIC3_OFFSET(INTR, P_INT_STAT));
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
/* Check all ten register bits */
|
|
if ((status & 0x3ff) == 0)
|
|
break;
|
|
|
|
/* Handle GPIO IRQs */
|
|
for (bank = 0; bank < ASIC3_NUM_GPIO_BANKS; bank++) {
|
|
if (status & (1 << bank)) {
|
|
unsigned long base, istat;
|
|
|
|
base = ASIC3_GPIO_A_BASE
|
|
+ bank * ASIC3_GPIO_BASE_INCR;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
istat = asic3_read_register(asic,
|
|
base +
|
|
ASIC3_GPIO_INT_STATUS);
|
|
/* Clearing IntStatus */
|
|
asic3_write_register(asic,
|
|
base +
|
|
ASIC3_GPIO_INT_STATUS, 0);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
|
|
int bit = (1 << i);
|
|
unsigned int irqnr;
|
|
|
|
if (!(istat & bit))
|
|
continue;
|
|
|
|
irqnr = asic->irq_base +
|
|
(ASIC3_GPIOS_PER_BANK * bank)
|
|
+ i;
|
|
generic_handle_irq(irqnr);
|
|
if (asic->irq_bothedge[bank] & bit)
|
|
asic3_irq_flip_edge(asic, base,
|
|
bit);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Handle remaining IRQs in the status register */
|
|
for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) {
|
|
/* They start at bit 4 and go up */
|
|
if (status & (1 << (i - ASIC3_NUM_GPIOS + 4)))
|
|
generic_handle_irq(asic->irq_base + i);
|
|
}
|
|
}
|
|
|
|
if (iter >= MAX_ASIC_ISR_LOOPS)
|
|
dev_err(asic->dev, "interrupt processing overrun\n");
|
|
}
|
|
|
|
static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
|
|
{
|
|
int n;
|
|
|
|
n = (irq - asic->irq_base) >> 4;
|
|
|
|
return (n * (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE));
|
|
}
|
|
|
|
static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
|
|
{
|
|
return (irq - asic->irq_base) & 0xf;
|
|
}
|
|
|
|
static void asic3_mask_gpio_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 val, bank, index;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
|
|
val |= 1 << index;
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_mask_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
int regval;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
regval = asic3_read_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK);
|
|
|
|
regval &= ~(ASIC3_INTMASK_MASK0 <<
|
|
(data->irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
|
|
|
|
asic3_write_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK,
|
|
regval);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_unmask_gpio_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 val, bank, index;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
|
|
val &= ~(1 << index);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_unmask_irq(struct irq_data *data)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
int regval;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
regval = asic3_read_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK);
|
|
|
|
regval |= (ASIC3_INTMASK_MASK0 <<
|
|
(data->irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
|
|
|
|
asic3_write_register(asic,
|
|
ASIC3_INTR_BASE +
|
|
ASIC3_INTR_INT_MASK,
|
|
regval);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static int asic3_gpio_irq_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 bank, index;
|
|
u16 trigger, level, edge, bit;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
bit = 1<<index;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
level = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_LEVEL_TRIGGER);
|
|
edge = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_EDGE_TRIGGER);
|
|
trigger = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_TRIGGER_TYPE);
|
|
asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] &= ~bit;
|
|
|
|
if (type == IRQ_TYPE_EDGE_RISING) {
|
|
trigger |= bit;
|
|
edge |= bit;
|
|
} else if (type == IRQ_TYPE_EDGE_FALLING) {
|
|
trigger |= bit;
|
|
edge &= ~bit;
|
|
} else if (type == IRQ_TYPE_EDGE_BOTH) {
|
|
trigger |= bit;
|
|
if (asic3_gpio_get(&asic->gpio, data->irq - asic->irq_base))
|
|
edge &= ~bit;
|
|
else
|
|
edge |= bit;
|
|
asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] |= bit;
|
|
} else if (type == IRQ_TYPE_LEVEL_LOW) {
|
|
trigger &= ~bit;
|
|
level &= ~bit;
|
|
} else if (type == IRQ_TYPE_LEVEL_HIGH) {
|
|
trigger &= ~bit;
|
|
level |= bit;
|
|
} else {
|
|
/*
|
|
* if type == IRQ_TYPE_NONE, we should mask interrupts, but
|
|
* be careful to not unmask them if mask was also called.
|
|
* Probably need internal state for mask.
|
|
*/
|
|
dev_notice(asic->dev, "irq type not changed\n");
|
|
}
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_LEVEL_TRIGGER,
|
|
level);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_EDGE_TRIGGER,
|
|
edge);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE,
|
|
trigger);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
|
|
{
|
|
struct asic3 *asic = irq_data_get_irq_chip_data(data);
|
|
u32 bank, index;
|
|
u16 bit;
|
|
|
|
bank = asic3_irq_to_bank(asic, data->irq);
|
|
index = asic3_irq_to_index(asic, data->irq);
|
|
bit = 1<<index;
|
|
|
|
asic3_set_register(asic, bank + ASIC3_GPIO_SLEEP_MASK, bit, !on);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip asic3_gpio_irq_chip = {
|
|
.name = "ASIC3-GPIO",
|
|
.irq_ack = asic3_mask_gpio_irq,
|
|
.irq_mask = asic3_mask_gpio_irq,
|
|
.irq_unmask = asic3_unmask_gpio_irq,
|
|
.irq_set_type = asic3_gpio_irq_type,
|
|
.irq_set_wake = asic3_gpio_irq_set_wake,
|
|
};
|
|
|
|
static struct irq_chip asic3_irq_chip = {
|
|
.name = "ASIC3",
|
|
.irq_ack = asic3_mask_irq,
|
|
.irq_mask = asic3_mask_irq,
|
|
.irq_unmask = asic3_unmask_irq,
|
|
};
|
|
|
|
static int __init asic3_irq_probe(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
unsigned long clksel = 0;
|
|
unsigned int irq, irq_base;
|
|
int ret;
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
asic->irq_nr = ret;
|
|
|
|
/* turn on clock to IRQ controller */
|
|
clksel |= CLOCK_SEL_CX;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
|
|
clksel);
|
|
|
|
irq_base = asic->irq_base;
|
|
|
|
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
|
|
if (irq < asic->irq_base + ASIC3_NUM_GPIOS)
|
|
irq_set_chip(irq, &asic3_gpio_irq_chip);
|
|
else
|
|
irq_set_chip(irq, &asic3_irq_chip);
|
|
|
|
irq_set_chip_data(irq, asic);
|
|
irq_set_handler(irq, handle_level_irq);
|
|
irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
}
|
|
|
|
asic3_write_register(asic, ASIC3_OFFSET(INTR, INT_MASK),
|
|
ASIC3_INTMASK_GINTMASK);
|
|
|
|
irq_set_chained_handler_and_data(asic->irq_nr, asic3_irq_demux, asic);
|
|
irq_set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_irq_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
unsigned int irq, irq_base;
|
|
|
|
irq_base = asic->irq_base;
|
|
|
|
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
|
|
irq_set_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
}
|
|
irq_set_chained_handler(asic->irq_nr, NULL);
|
|
}
|
|
|
|
/* GPIOs */
|
|
static int asic3_gpio_direction(struct gpio_chip *chip,
|
|
unsigned offset, int out)
|
|
{
|
|
u32 mask = ASIC3_GPIO_TO_MASK(offset), out_reg;
|
|
unsigned int gpio_base;
|
|
unsigned long flags;
|
|
struct asic3 *asic;
|
|
|
|
asic = container_of(chip, struct asic3, gpio);
|
|
gpio_base = ASIC3_GPIO_TO_BASE(offset);
|
|
|
|
if (gpio_base > ASIC3_GPIO_D_BASE) {
|
|
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
|
|
gpio_base, offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
|
|
out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_DIRECTION);
|
|
|
|
/* Input is 0, Output is 1 */
|
|
if (out)
|
|
out_reg |= mask;
|
|
else
|
|
out_reg &= ~mask;
|
|
|
|
asic3_write_register(asic, gpio_base + ASIC3_GPIO_DIRECTION, out_reg);
|
|
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int asic3_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
return asic3_gpio_direction(chip, offset, 0);
|
|
}
|
|
|
|
static int asic3_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
return asic3_gpio_direction(chip, offset, 1);
|
|
}
|
|
|
|
static int asic3_gpio_get(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
unsigned int gpio_base;
|
|
u32 mask = ASIC3_GPIO_TO_MASK(offset);
|
|
struct asic3 *asic;
|
|
|
|
asic = container_of(chip, struct asic3, gpio);
|
|
gpio_base = ASIC3_GPIO_TO_BASE(offset);
|
|
|
|
if (gpio_base > ASIC3_GPIO_D_BASE) {
|
|
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
|
|
gpio_base, offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask;
|
|
}
|
|
|
|
static void asic3_gpio_set(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
u32 mask, out_reg;
|
|
unsigned int gpio_base;
|
|
unsigned long flags;
|
|
struct asic3 *asic;
|
|
|
|
asic = container_of(chip, struct asic3, gpio);
|
|
gpio_base = ASIC3_GPIO_TO_BASE(offset);
|
|
|
|
if (gpio_base > ASIC3_GPIO_D_BASE) {
|
|
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
|
|
gpio_base, offset);
|
|
return;
|
|
}
|
|
|
|
mask = ASIC3_GPIO_TO_MASK(offset);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
|
|
out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_OUT);
|
|
|
|
if (value)
|
|
out_reg |= mask;
|
|
else
|
|
out_reg &= ~mask;
|
|
|
|
asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg);
|
|
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct asic3 *asic = container_of(chip, struct asic3, gpio);
|
|
|
|
return asic->irq_base + offset;
|
|
}
|
|
|
|
static __init int asic3_gpio_probe(struct platform_device *pdev,
|
|
u16 *gpio_config, int num)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
u16 alt_reg[ASIC3_NUM_GPIO_BANKS];
|
|
u16 out_reg[ASIC3_NUM_GPIO_BANKS];
|
|
u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
|
|
int i;
|
|
|
|
memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
|
|
memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
|
|
memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
|
|
|
|
/* Enable all GPIOs */
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, MASK), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, MASK), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, MASK), 0xffff);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
u8 alt, pin, dir, init, bank_num, bit_num;
|
|
u16 config = gpio_config[i];
|
|
|
|
pin = ASIC3_CONFIG_GPIO_PIN(config);
|
|
alt = ASIC3_CONFIG_GPIO_ALT(config);
|
|
dir = ASIC3_CONFIG_GPIO_DIR(config);
|
|
init = ASIC3_CONFIG_GPIO_INIT(config);
|
|
|
|
bank_num = ASIC3_GPIO_TO_BANK(pin);
|
|
bit_num = ASIC3_GPIO_TO_BIT(pin);
|
|
|
|
alt_reg[bank_num] |= (alt << bit_num);
|
|
out_reg[bank_num] |= (init << bit_num);
|
|
dir_reg[bank_num] |= (dir << bit_num);
|
|
}
|
|
|
|
for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) {
|
|
asic3_write_register(asic,
|
|
ASIC3_BANK_TO_BASE(i) +
|
|
ASIC3_GPIO_DIRECTION,
|
|
dir_reg[i]);
|
|
asic3_write_register(asic,
|
|
ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_OUT,
|
|
out_reg[i]);
|
|
asic3_write_register(asic,
|
|
ASIC3_BANK_TO_BASE(i) +
|
|
ASIC3_GPIO_ALT_FUNCTION,
|
|
alt_reg[i]);
|
|
}
|
|
|
|
return gpiochip_add(&asic->gpio);
|
|
}
|
|
|
|
static int asic3_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&asic->gpio);
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
|
|
{
|
|
unsigned long flags;
|
|
u32 cdex;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
if (clk->enabled++ == 0) {
|
|
cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
|
|
cdex |= clk->cdex;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
|
|
}
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
|
|
{
|
|
unsigned long flags;
|
|
u32 cdex;
|
|
|
|
WARN_ON(clk->enabled == 0);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
if (--clk->enabled == 0) {
|
|
cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
|
|
cdex &= ~clk->cdex;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
|
|
}
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
/* MFD cells (SPI, PWM, LED, DS1WM, MMC) */
|
|
static struct ds1wm_driver_data ds1wm_pdata = {
|
|
.active_high = 1,
|
|
.reset_recover_delay = 1,
|
|
};
|
|
|
|
static struct resource ds1wm_resources[] = {
|
|
{
|
|
.start = ASIC3_OWM_BASE,
|
|
.end = ASIC3_OWM_BASE + 0x13,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = ASIC3_IRQ_OWM,
|
|
.end = ASIC3_IRQ_OWM,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
},
|
|
};
|
|
|
|
static int ds1wm_enable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
/* Turn on external clocks and the OWM clock */
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
|
|
msleep(1);
|
|
|
|
/* Reset and enable DS1WM */
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
|
|
ASIC3_EXTCF_OWM_RESET, 1);
|
|
msleep(1);
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
|
|
ASIC3_EXTCF_OWM_RESET, 0);
|
|
msleep(1);
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_OWM_EN, 1);
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds1wm_disable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_OWM_EN, 0);
|
|
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mfd_cell asic3_cell_ds1wm = {
|
|
.name = "ds1wm",
|
|
.enable = ds1wm_enable,
|
|
.disable = ds1wm_disable,
|
|
.platform_data = &ds1wm_pdata,
|
|
.pdata_size = sizeof(ds1wm_pdata),
|
|
.num_resources = ARRAY_SIZE(ds1wm_resources),
|
|
.resources = ds1wm_resources,
|
|
};
|
|
|
|
static void asic3_mmc_pwr(struct platform_device *pdev, int state)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state);
|
|
}
|
|
|
|
static void asic3_mmc_clk_div(struct platform_device *pdev, int state)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state);
|
|
}
|
|
|
|
static struct tmio_mmc_data asic3_mmc_data = {
|
|
.hclk = 24576000,
|
|
.set_pwr = asic3_mmc_pwr,
|
|
.set_clk_div = asic3_mmc_clk_div,
|
|
};
|
|
|
|
static struct resource asic3_mmc_resources[] = {
|
|
{
|
|
.start = ASIC3_SD_CTRL_BASE,
|
|
.end = ASIC3_SD_CTRL_BASE + 0x3ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 0,
|
|
.end = 0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static int asic3_mmc_enable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
/* Not sure if it must be done bit by bit, but leaving as-is */
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_LEVCD, 1);
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_LEVWP, 1);
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_SUSPEND, 0);
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_PCLR, 0);
|
|
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
/* CLK32 used for card detection and for interruption detection
|
|
* when HCLK is stopped.
|
|
*/
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
msleep(1);
|
|
|
|
/* HCLK 24.576 MHz, BCLK 12.288 MHz: */
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
|
|
CLOCK_SEL_CX | CLOCK_SEL_SD_HCLK_SEL);
|
|
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
|
|
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
|
|
msleep(1);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_SD_MEM_ENABLE, 1);
|
|
|
|
/* Enable SD card slot 3.3V power supply */
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_SDPWR, 1);
|
|
|
|
/* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */
|
|
tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift,
|
|
ASIC3_SD_CTRL_BASE >> 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_mmc_disable(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
/* Put in suspend mode */
|
|
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
|
|
ASIC3_SDHWCTRL_SUSPEND, 1);
|
|
|
|
/* Disable clocks */
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
|
|
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
|
|
return 0;
|
|
}
|
|
|
|
static const struct mfd_cell asic3_cell_mmc = {
|
|
.name = "tmio-mmc",
|
|
.enable = asic3_mmc_enable,
|
|
.disable = asic3_mmc_disable,
|
|
.suspend = asic3_mmc_disable,
|
|
.resume = asic3_mmc_enable,
|
|
.platform_data = &asic3_mmc_data,
|
|
.pdata_size = sizeof(asic3_mmc_data),
|
|
.num_resources = ARRAY_SIZE(asic3_mmc_resources),
|
|
.resources = asic3_mmc_resources,
|
|
};
|
|
|
|
static const int clock_ledn[ASIC3_NUM_LEDS] = {
|
|
[0] = ASIC3_CLOCK_LED0,
|
|
[1] = ASIC3_CLOCK_LED1,
|
|
[2] = ASIC3_CLOCK_LED2,
|
|
};
|
|
|
|
static int asic3_leds_enable(struct platform_device *pdev)
|
|
{
|
|
const struct mfd_cell *cell = mfd_get_cell(pdev);
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
asic3_clk_enable(asic, &asic->clocks[clock_ledn[cell->id]]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_leds_disable(struct platform_device *pdev)
|
|
{
|
|
const struct mfd_cell *cell = mfd_get_cell(pdev);
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asic3_leds_suspend(struct platform_device *pdev)
|
|
{
|
|
const struct mfd_cell *cell = mfd_get_cell(pdev);
|
|
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
|
|
msleep(1);
|
|
|
|
asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = {
|
|
[0] = {
|
|
.name = "leds-asic3",
|
|
.id = 0,
|
|
.enable = asic3_leds_enable,
|
|
.disable = asic3_leds_disable,
|
|
.suspend = asic3_leds_suspend,
|
|
.resume = asic3_leds_enable,
|
|
},
|
|
[1] = {
|
|
.name = "leds-asic3",
|
|
.id = 1,
|
|
.enable = asic3_leds_enable,
|
|
.disable = asic3_leds_disable,
|
|
.suspend = asic3_leds_suspend,
|
|
.resume = asic3_leds_enable,
|
|
},
|
|
[2] = {
|
|
.name = "leds-asic3",
|
|
.id = 2,
|
|
.enable = asic3_leds_enable,
|
|
.disable = asic3_leds_disable,
|
|
.suspend = asic3_leds_suspend,
|
|
.resume = asic3_leds_enable,
|
|
},
|
|
};
|
|
|
|
static int __init asic3_mfd_probe(struct platform_device *pdev,
|
|
struct asic3_platform_data *pdata,
|
|
struct resource *mem)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
struct resource *mem_sdio;
|
|
int irq, ret;
|
|
|
|
mem_sdio = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (!mem_sdio)
|
|
dev_dbg(asic->dev, "no SDIO MEM resource\n");
|
|
|
|
irq = platform_get_irq(pdev, 1);
|
|
if (irq < 0)
|
|
dev_dbg(asic->dev, "no SDIO IRQ resource\n");
|
|
|
|
/* DS1WM */
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
ASIC3_EXTCF_OWM_SMB, 0);
|
|
|
|
ds1wm_resources[0].start >>= asic->bus_shift;
|
|
ds1wm_resources[0].end >>= asic->bus_shift;
|
|
|
|
/* MMC */
|
|
if (mem_sdio) {
|
|
asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
|
|
mem_sdio->start,
|
|
ASIC3_SD_CONFIG_SIZE >> asic->bus_shift);
|
|
if (!asic->tmio_cnf) {
|
|
ret = -ENOMEM;
|
|
dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n");
|
|
goto out;
|
|
}
|
|
}
|
|
asic3_mmc_resources[0].start >>= asic->bus_shift;
|
|
asic3_mmc_resources[0].end >>= asic->bus_shift;
|
|
|
|
if (pdata->clock_rate) {
|
|
ds1wm_pdata.clock_rate = pdata->clock_rate;
|
|
ret = mfd_add_devices(&pdev->dev, pdev->id,
|
|
&asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
if (mem_sdio && (irq >= 0)) {
|
|
ret = mfd_add_devices(&pdev->dev, pdev->id,
|
|
&asic3_cell_mmc, 1, mem_sdio, irq, NULL);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
ret = 0;
|
|
if (pdata->leds) {
|
|
int i;
|
|
|
|
for (i = 0; i < ASIC3_NUM_LEDS; ++i) {
|
|
asic3_cell_leds[i].platform_data = &pdata->leds[i];
|
|
asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]);
|
|
}
|
|
ret = mfd_add_devices(&pdev->dev, 0,
|
|
asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void asic3_mfd_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
mfd_remove_devices(&pdev->dev);
|
|
iounmap(asic->tmio_cnf);
|
|
}
|
|
|
|
/* Core */
|
|
static int __init asic3_probe(struct platform_device *pdev)
|
|
{
|
|
struct asic3_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct asic3 *asic;
|
|
struct resource *mem;
|
|
unsigned long clksel;
|
|
int ret = 0;
|
|
|
|
asic = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct asic3), GFP_KERNEL);
|
|
if (asic == NULL) {
|
|
printk(KERN_ERR "kzalloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_init(&asic->lock);
|
|
platform_set_drvdata(pdev, asic);
|
|
asic->dev = &pdev->dev;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem) {
|
|
dev_err(asic->dev, "no MEM resource\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
asic->mapping = ioremap(mem->start, resource_size(mem));
|
|
if (!asic->mapping) {
|
|
dev_err(asic->dev, "Couldn't ioremap\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
asic->irq_base = pdata->irq_base;
|
|
|
|
/* calculate bus shift from mem resource */
|
|
asic->bus_shift = 2 - (resource_size(mem) >> 12);
|
|
|
|
clksel = 0;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
|
|
|
|
ret = asic3_irq_probe(pdev);
|
|
if (ret < 0) {
|
|
dev_err(asic->dev, "Couldn't probe IRQs\n");
|
|
goto out_unmap;
|
|
}
|
|
|
|
asic->gpio.label = "asic3";
|
|
asic->gpio.base = pdata->gpio_base;
|
|
asic->gpio.ngpio = ASIC3_NUM_GPIOS;
|
|
asic->gpio.get = asic3_gpio_get;
|
|
asic->gpio.set = asic3_gpio_set;
|
|
asic->gpio.direction_input = asic3_gpio_direction_input;
|
|
asic->gpio.direction_output = asic3_gpio_direction_output;
|
|
asic->gpio.to_irq = asic3_gpio_to_irq;
|
|
|
|
ret = asic3_gpio_probe(pdev,
|
|
pdata->gpio_config,
|
|
pdata->gpio_config_num);
|
|
if (ret < 0) {
|
|
dev_err(asic->dev, "GPIO probe failed\n");
|
|
goto out_irq;
|
|
}
|
|
|
|
/* Making a per-device copy is only needed for the
|
|
* theoretical case of multiple ASIC3s on one board:
|
|
*/
|
|
memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init));
|
|
|
|
asic3_mfd_probe(pdev, pdata, mem);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
(ASIC3_EXTCF_CF0_BUF_EN|ASIC3_EXTCF_CF0_PWAIT_EN), 1);
|
|
|
|
dev_info(asic->dev, "ASIC3 Core driver\n");
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
asic3_irq_remove(pdev);
|
|
|
|
out_unmap:
|
|
iounmap(asic->mapping);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int asic3_remove(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
|
|
(ASIC3_EXTCF_CF0_BUF_EN|ASIC3_EXTCF_CF0_PWAIT_EN), 0);
|
|
|
|
asic3_mfd_remove(pdev);
|
|
|
|
ret = asic3_gpio_remove(pdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
asic3_irq_remove(pdev);
|
|
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0);
|
|
|
|
iounmap(asic->mapping);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_shutdown(struct platform_device *pdev)
|
|
{
|
|
}
|
|
|
|
static struct platform_driver asic3_device_driver = {
|
|
.driver = {
|
|
.name = "asic3",
|
|
},
|
|
.remove = asic3_remove,
|
|
.shutdown = asic3_shutdown,
|
|
};
|
|
|
|
static int __init asic3_init(void)
|
|
{
|
|
int retval = 0;
|
|
retval = platform_driver_probe(&asic3_device_driver, asic3_probe);
|
|
return retval;
|
|
}
|
|
|
|
subsys_initcall(asic3_init);
|