| .. |
|
aec62xx.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
ali14xx.c
|
ide: change ->set_pio_mode method parameters
|
2010-01-19 01:44:41 -08:00 |
|
alim15x3.c
|
alim15x3: fix handling of UDMA enable bit
|
2010-01-19 01:52:31 -08:00 |
|
amd74xx.c
|
amd74xx: use ->pio_mode value to determine pair device speed
|
2010-01-19 01:52:32 -08:00 |
|
at91_ide.c
|
ARM: at91/ide: use gpio_is_valid to check the gpio
|
2011-11-29 15:46:15 +00:00 |
|
atiixp.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
au1xxx-ide.c
|
MIPS: Alchemy: kill au1xxx.h header
|
2011-10-24 23:34:24 +01:00 |
|
buddha.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
cmd64x.c
|
cmd64x: fix handling of address setup timings
|
2010-01-19 01:52:32 -08:00 |
|
cmd640.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
cs5520.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
cs5530.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
cs5535.c
|
cs5535: use ->pio_mode value to determine pair device speed
|
2010-01-19 01:52:33 -08:00 |
|
cs5536.c
|
cs5536: use ->pio_mode value to determine pair device speed
|
2010-01-19 01:52:33 -08:00 |
|
cy82c693.c
|
cy82c693: fix PCI device selection
|
2011-10-13 17:04:50 -04:00 |
|
delkin_cb.c
|
ide: remove hw_regs_t typedef
|
2009-05-17 19:12:25 +02:00 |
|
dtc2278.c
|
ide: change ->set_pio_mode method parameters
|
2010-01-19 01:44:41 -08:00 |
|
falconide.c
|
ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
|
2009-06-15 18:52:58 +02:00 |
|
gayle.c
|
m68k: amiga - Amiga Gayle IDE platform device conversion
|
2010-05-26 19:51:09 +02:00 |
|
hpt366.c
|
hpt366: fix clock turnaround
|
2010-10-26 10:17:29 -07:00 |
|
ht6560b.c
|
Update broken web addresses in the kernel.
|
2010-10-18 11:03:14 +02:00 |
|
icside.c
|
icside: DMA support fix
|
2011-10-13 17:04:50 -04:00 |
|
ide_platform.c
|
ide: Fix irq flags madness
|
2011-08-04 01:29:51 -07:00 |
|
ide-4drives.c
|
ide: remove hw_regs_t typedef
|
2009-05-17 19:12:25 +02:00 |
|
ide-acpi.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
ide-atapi.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-cd_ioctl.c
|
ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd
|
2011-04-21 19:43:59 +02:00 |
|
ide-cd_verbose.c
|
block: replace sizeof(rq->cmd) with BLK_MAX_CDB
|
2008-04-29 14:48:55 +02:00 |
|
ide-cd.c
|
ide-{cd,floppy,tape}: Do not include <linux/irq.h>
|
2011-11-08 22:35:46 +01:00 |
|
ide-cd.h
|
ide: Convert to bdops->check_events()
|
2011-03-09 19:54:27 +01:00 |
|
ide-cs.c
|
pcmcia: Convert pcmcia_device_id declarations to const
|
2011-05-06 07:46:22 +02:00 |
|
ide-devsets.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
|
ide-disk_ioctl.c
|
block: autoconvert trivial BKL users to private mutex
|
2010-10-05 15:01:10 +02:00 |
|
ide-disk_proc.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-disk.c
|
ide-disk: Fix request requeuing
|
2011-10-03 14:28:18 -04:00 |
|
ide-disk.h
|
[PATCH] switch ide_disk_ops ->ioctl() to sane prototype
|
2008-10-21 07:47:30 -04:00 |
|
ide-dma-sff.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-dma.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-eh.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-floppy_ioctl.c
|
block: autoconvert trivial BKL users to private mutex
|
2010-10-05 15:01:10 +02:00 |
|
ide-floppy_proc.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-floppy.c
|
ide-{cd,floppy,tape}: Do not include <linux/irq.h>
|
2011-11-08 22:35:46 +01:00 |
|
ide-floppy.h
|
[PATCH] switch ide_disk_ops ->ioctl() to sane prototype
|
2008-10-21 07:47:30 -04:00 |
|
ide-gd.c
|
ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd
|
2011-04-21 19:43:59 +02:00 |
|
ide-gd.h
|
ide: move ->failed_pc to ide_drive_t
|
2009-03-27 12:46:34 +01:00 |
|
ide-generic.c
|
ide: remove hw_regs_t typedef
|
2009-05-17 19:12:25 +02:00 |
|
ide-h8300.c
|
ide: remove hw_regs_t typedef
|
2009-05-17 19:12:25 +02:00 |
|
ide-io-std.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-io.c
|
ide: always ensure that blk_delay_queue() is called if we have pending IO
|
2011-04-05 23:52:49 +02:00 |
|
ide-ioctls.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-iops.c
|
ide: add SATA cable detection support
|
2010-01-19 01:41:57 -08:00 |
|
ide-legacy.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-lib.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-park.c
|
block: remove per-queue plugging
|
2011-03-10 08:52:07 +01:00 |
|
ide-pci-generic.c
|
pata_piccolo: Driver for old Toshiba chipsets
|
2009-12-03 14:35:31 -05:00 |
|
ide-pio-blacklist.c
|
ide: move PIO blacklist to ide-pio-blacklist.c
|
2008-07-16 20:33:39 +02:00 |
|
ide-pm.c
|
block: remove wrappers for request type/flags
|
2010-08-07 18:17:56 +02:00 |
|
ide-pnp.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
ide-probe.c
|
ide: Fix ordering of procfs registry.
|
2010-09-13 21:34:25 -07:00 |
|
ide-proc.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
|
ide-scan-pci.c
|
ide/ide-scan-pci.c: Use for_each_pci_dev().
|
2011-05-16 14:24:46 -07:00 |
|
ide-sysfs.c
|
ide: move sysfs support to ide-sysfs.c
|
2009-01-02 16:12:48 +01:00 |
|
ide-tape.c
|
ide-{cd,floppy,tape}: Do not include <linux/irq.h>
|
2011-11-08 22:35:46 +01:00 |
|
ide-taskfile.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide-timings.c
|
ide: ide_timing_compute() fixup
|
2010-01-19 11:30:09 -08:00 |
|
ide-xfer-mode.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
ide.c
|
ide: use module_param_named rather than module_param_call
|
2010-08-11 23:04:39 +09:30 |
|
it821x.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
|
it8172.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
it8213.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
jmicron.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
Kconfig
|
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
|
2011-11-03 13:28:14 -07:00 |
|
macide.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
Makefile
|
ide: change to new flag variable
|
2011-03-17 14:05:34 +01:00 |
|
ns87415.c
|
ide: refactor tf_read() method
|
2009-04-08 14:13:03 +02:00 |
|
opti621.c
|
ide: change ->set_pio_mode method parameters
|
2010-01-19 01:44:41 -08:00 |
|
palm_bk3710.c
|
treewide: Convert uses of struct resource to resource_size(ptr)
|
2011-06-10 14:55:36 +02:00 |
|
pdc202xx_new.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
pdc202xx_old.c
|
pdc202xx_old: ignore "FIFO empty" bit in test_irq() method
|
2010-04-22 19:11:24 -07:00 |
|
piix.c
|
piix: ICH7 MWDMA1 errata
|
2011-10-11 15:19:43 -04:00 |
|
pmac.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
q40ide.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
qd65xx.c
|
ide: change ->set_pio_mode method parameters
|
2010-01-19 01:44:41 -08:00 |
|
qd65xx.h
|
ide: do not access ide_drive_t 'drive_data' field directly
|
2009-06-15 22:13:44 +02:00 |
|
rapide.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
|
rz1000.c
|
rz1000: apply chipset quirks early (v2)
|
2008-12-29 20:27:33 +01:00 |
|
sc1200.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
|
scc_pata.c
|
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/ide-2.6
|
2010-03-02 23:57:59 -08:00 |
|
serverworks.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
setup-pci.c
|
ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
|
2011-10-31 19:31:37 -04:00 |
|
sgiioc4.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
siimage.c
|
siimage: use ->pio_mode value to determine pair device speed
|
2010-01-19 01:52:35 -08:00 |
|
sis5513.c
|
Fix common misspellings
|
2011-03-31 11:26:23 -03:00 |
|
sl82c105.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
slc90e66.c
|
ide: change ->set_dma_mode method parameters
|
2010-01-19 01:45:29 -08:00 |
|
tc86c001.c
|
ide/ata: Add module.h to the implicit modular users
|
2011-10-31 19:31:37 -04:00 |
|
triflex.c
|
IDE: Don't powerdown Compaq Triflex IDE device on suspend
|
2011-10-13 17:04:49 -04:00 |
|
trm290.c
|
ide: turn selectproc() method into dev_select() method (take 5)
|
2009-03-31 20:15:32 +02:00 |
|
tx4938ide.c
|
tx493xide: use min_t() macro instead of min()
|
2010-08-09 03:17:55 -07:00 |
|
tx4939ide.c
|
treewide: Convert uses of struct resource to resource_size(ptr)
|
2011-06-10 14:55:36 +02:00 |
|
umc8672.c
|
ide: change ->set_pio_mode method parameters
|
2010-01-19 01:44:41 -08:00 |
|
via82cxxx.c
|
Fix common misspellings
|
2011-03-31 11:26:23 -03:00 |
