mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 11:50:52 +07:00
fa39210d41
This structure is only used to copy into other structure, so declare it as const. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; In the following log you can see a significant difference in the code size and data segment, hence in the dec segment. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 11866 3520 128 15514 3c9a drivers/pinctrl/pinctrl-rza1.o after: text data bss dec hex filename 11539 3464 128 15131 3b1b drivers/pinctrl/pinctrl-rza1.o Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1309 lines
33 KiB
C
1309 lines
33 KiB
C
/*
|
|
* Combined GPIO and pin controller support for Renesas RZ/A1 (r7s72100) SoC
|
|
*
|
|
* Copyright (C) 2017 Jacopo Mondi
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
/*
|
|
* This pin controller/gpio combined driver supports Renesas devices of RZ/A1
|
|
* family.
|
|
* This includes SoCs which are sub- or super- sets of this particular line,
|
|
* as RZ/A1H (r7s721000), RZ/A1M (r7s721010) and RZ/A1L (r7s721020).
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "core.h"
|
|
#include "devicetree.h"
|
|
#include "pinconf.h"
|
|
#include "pinmux.h"
|
|
|
|
#define DRIVER_NAME "pinctrl-rza1"
|
|
|
|
#define RZA1_P_REG 0x0000
|
|
#define RZA1_PPR_REG 0x0200
|
|
#define RZA1_PM_REG 0x0300
|
|
#define RZA1_PMC_REG 0x0400
|
|
#define RZA1_PFC_REG 0x0500
|
|
#define RZA1_PFCE_REG 0x0600
|
|
#define RZA1_PFCEA_REG 0x0a00
|
|
#define RZA1_PIBC_REG 0x4000
|
|
#define RZA1_PBDC_REG 0x4100
|
|
#define RZA1_PIPC_REG 0x4200
|
|
|
|
#define RZA1_ADDR(mem, reg, port) ((mem) + (reg) + ((port) * 4))
|
|
|
|
#define RZA1_NPORTS 12
|
|
#define RZA1_PINS_PER_PORT 16
|
|
#define RZA1_NPINS (RZA1_PINS_PER_PORT * RZA1_NPORTS)
|
|
#define RZA1_PIN_ID_TO_PORT(id) ((id) / RZA1_PINS_PER_PORT)
|
|
#define RZA1_PIN_ID_TO_PIN(id) ((id) % RZA1_PINS_PER_PORT)
|
|
|
|
/*
|
|
* Use 16 lower bits [15:0] for pin identifier
|
|
* Use 16 higher bits [31:16] for pin mux function
|
|
*/
|
|
#define MUX_PIN_ID_MASK GENMASK(15, 0)
|
|
#define MUX_FUNC_MASK GENMASK(31, 16)
|
|
|
|
#define MUX_FUNC_OFFS 16
|
|
#define MUX_FUNC(pinconf) \
|
|
((pinconf & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
|
|
#define MUX_FUNC_PFC_MASK BIT(0)
|
|
#define MUX_FUNC_PFCE_MASK BIT(1)
|
|
#define MUX_FUNC_PFCEA_MASK BIT(2)
|
|
|
|
/* Pin mux flags */
|
|
#define MUX_FLAGS_BIDIR BIT(0)
|
|
#define MUX_FLAGS_SWIO_INPUT BIT(1)
|
|
#define MUX_FLAGS_SWIO_OUTPUT BIT(2)
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 pinmux flags
|
|
*/
|
|
|
|
/**
|
|
* rza1_bidir_pin - describe a single pin that needs bidir flag applied.
|
|
*/
|
|
struct rza1_bidir_pin {
|
|
u8 pin: 4;
|
|
u8 func: 4;
|
|
};
|
|
|
|
/**
|
|
* rza1_bidir_entry - describe a list of pins that needs bidir flag applied.
|
|
* Each struct rza1_bidir_entry describes a port.
|
|
*/
|
|
struct rza1_bidir_entry {
|
|
const unsigned int npins;
|
|
const struct rza1_bidir_pin *pins;
|
|
};
|
|
|
|
/**
|
|
* rza1_swio_pin - describe a single pin that needs bidir flag applied.
|
|
*/
|
|
struct rza1_swio_pin {
|
|
u16 pin: 4;
|
|
u16 port: 4;
|
|
u16 func: 4;
|
|
u16 input: 1;
|
|
};
|
|
|
|
/**
|
|
* rza1_swio_entry - describe a list of pins that needs swio flag applied
|
|
*/
|
|
struct rza1_swio_entry {
|
|
const unsigned int npins;
|
|
const struct rza1_swio_pin *pins;
|
|
};
|
|
|
|
/**
|
|
* rza1_pinmux_conf - group together bidir and swio pinmux flag tables
|
|
*/
|
|
struct rza1_pinmux_conf {
|
|
const struct rza1_bidir_entry *bidir_entries;
|
|
const struct rza1_swio_entry *swio_entries;
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1H (r7s72100) pinmux flags
|
|
*/
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p1[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p2[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 0, .func = 4 },
|
|
{ .pin = 1, .func = 4 },
|
|
{ .pin = 2, .func = 4 },
|
|
{ .pin = 3, .func = 4 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
{ .pin = 8, .func = 1 },
|
|
{ .pin = 9, .func = 1 },
|
|
{ .pin = 10, .func = 1 },
|
|
{ .pin = 11, .func = 1 },
|
|
{ .pin = 12, .func = 1 },
|
|
{ .pin = 13, .func = 1 },
|
|
{ .pin = 14, .func = 1 },
|
|
{ .pin = 15, .func = 1 },
|
|
{ .pin = 12, .func = 4 },
|
|
{ .pin = 13, .func = 4 },
|
|
{ .pin = 14, .func = 4 },
|
|
{ .pin = 15, .func = 4 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p3[] = {
|
|
{ .pin = 3, .func = 2 },
|
|
{ .pin = 10, .func = 7 },
|
|
{ .pin = 11, .func = 7 },
|
|
{ .pin = 13, .func = 7 },
|
|
{ .pin = 14, .func = 7 },
|
|
{ .pin = 15, .func = 7 },
|
|
{ .pin = 10, .func = 8 },
|
|
{ .pin = 11, .func = 8 },
|
|
{ .pin = 13, .func = 8 },
|
|
{ .pin = 14, .func = 8 },
|
|
{ .pin = 15, .func = 8 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p4[] = {
|
|
{ .pin = 0, .func = 8 },
|
|
{ .pin = 1, .func = 8 },
|
|
{ .pin = 2, .func = 8 },
|
|
{ .pin = 3, .func = 8 },
|
|
{ .pin = 10, .func = 3 },
|
|
{ .pin = 11, .func = 3 },
|
|
{ .pin = 13, .func = 3 },
|
|
{ .pin = 14, .func = 3 },
|
|
{ .pin = 15, .func = 3 },
|
|
{ .pin = 10, .func = 4 },
|
|
{ .pin = 11, .func = 4 },
|
|
{ .pin = 13, .func = 4 },
|
|
{ .pin = 14, .func = 4 },
|
|
{ .pin = 15, .func = 4 },
|
|
{ .pin = 12, .func = 5 },
|
|
{ .pin = 13, .func = 5 },
|
|
{ .pin = 14, .func = 5 },
|
|
{ .pin = 15, .func = 5 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p6[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
{ .pin = 8, .func = 1 },
|
|
{ .pin = 9, .func = 1 },
|
|
{ .pin = 10, .func = 1 },
|
|
{ .pin = 11, .func = 1 },
|
|
{ .pin = 12, .func = 1 },
|
|
{ .pin = 13, .func = 1 },
|
|
{ .pin = 14, .func = 1 },
|
|
{ .pin = 15, .func = 1 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p7[] = {
|
|
{ .pin = 13, .func = 3 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p8[] = {
|
|
{ .pin = 8, .func = 3 },
|
|
{ .pin = 9, .func = 3 },
|
|
{ .pin = 10, .func = 3 },
|
|
{ .pin = 11, .func = 3 },
|
|
{ .pin = 14, .func = 2 },
|
|
{ .pin = 15, .func = 2 },
|
|
{ .pin = 14, .func = 3 },
|
|
{ .pin = 15, .func = 3 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p9[] = {
|
|
{ .pin = 0, .func = 2 },
|
|
{ .pin = 1, .func = 2 },
|
|
{ .pin = 4, .func = 2 },
|
|
{ .pin = 5, .func = 2 },
|
|
{ .pin = 6, .func = 2 },
|
|
{ .pin = 7, .func = 2 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p11[] = {
|
|
{ .pin = 6, .func = 2 },
|
|
{ .pin = 7, .func = 2 },
|
|
{ .pin = 9, .func = 2 },
|
|
{ .pin = 6, .func = 4 },
|
|
{ .pin = 7, .func = 4 },
|
|
{ .pin = 9, .func = 4 },
|
|
{ .pin = 10, .func = 2 },
|
|
{ .pin = 11, .func = 2 },
|
|
{ .pin = 10, .func = 4 },
|
|
{ .pin = 11, .func = 4 },
|
|
{ .pin = 12, .func = 4 },
|
|
{ .pin = 13, .func = 4 },
|
|
{ .pin = 14, .func = 4 },
|
|
{ .pin = 15, .func = 4 },
|
|
};
|
|
|
|
static const struct rza1_swio_pin rza1h_swio_pins[] = {
|
|
{ .port = 2, .pin = 7, .func = 4, .input = 0 },
|
|
{ .port = 2, .pin = 11, .func = 4, .input = 0 },
|
|
{ .port = 3, .pin = 7, .func = 3, .input = 0 },
|
|
{ .port = 3, .pin = 7, .func = 8, .input = 0 },
|
|
{ .port = 4, .pin = 7, .func = 5, .input = 0 },
|
|
{ .port = 4, .pin = 7, .func = 11, .input = 0 },
|
|
{ .port = 4, .pin = 15, .func = 6, .input = 0 },
|
|
{ .port = 5, .pin = 0, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 1, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 2, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 3, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 4, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 5, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 6, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 7, .func = 1, .input = 1 },
|
|
{ .port = 7, .pin = 4, .func = 6, .input = 0 },
|
|
{ .port = 7, .pin = 11, .func = 2, .input = 0 },
|
|
{ .port = 8, .pin = 10, .func = 8, .input = 0 },
|
|
{ .port = 10, .pin = 15, .func = 2, .input = 0 },
|
|
};
|
|
|
|
static const struct rza1_bidir_entry rza1h_bidir_entries[RZA1_NPORTS] = {
|
|
[1] = { ARRAY_SIZE(rza1h_bidir_pins_p1), rza1h_bidir_pins_p1 },
|
|
[2] = { ARRAY_SIZE(rza1h_bidir_pins_p2), rza1h_bidir_pins_p2 },
|
|
[3] = { ARRAY_SIZE(rza1h_bidir_pins_p3), rza1h_bidir_pins_p3 },
|
|
[4] = { ARRAY_SIZE(rza1h_bidir_pins_p4), rza1h_bidir_pins_p4 },
|
|
[6] = { ARRAY_SIZE(rza1h_bidir_pins_p6), rza1h_bidir_pins_p6 },
|
|
[7] = { ARRAY_SIZE(rza1h_bidir_pins_p7), rza1h_bidir_pins_p7 },
|
|
[8] = { ARRAY_SIZE(rza1h_bidir_pins_p8), rza1h_bidir_pins_p8 },
|
|
[9] = { ARRAY_SIZE(rza1h_bidir_pins_p9), rza1h_bidir_pins_p9 },
|
|
[11] = { ARRAY_SIZE(rza1h_bidir_pins_p11), rza1h_bidir_pins_p11 },
|
|
};
|
|
|
|
static const struct rza1_swio_entry rza1h_swio_entries[] = {
|
|
[0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins },
|
|
};
|
|
|
|
/* RZ/A1H (r7s72100x) pinmux flags table */
|
|
static const struct rza1_pinmux_conf rza1h_pmx_conf = {
|
|
.bidir_entries = rza1h_bidir_entries,
|
|
.swio_entries = rza1h_swio_entries,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 types
|
|
*/
|
|
/**
|
|
* rza1_mux_conf - describes a pin multiplexing operation
|
|
*
|
|
* @id: the pin identifier from 0 to RZA1_NPINS
|
|
* @port: the port where pin sits on
|
|
* @pin: pin id
|
|
* @mux_func: alternate function id number
|
|
* @mux_flags: alternate function flags
|
|
* @value: output value to set the pin to
|
|
*/
|
|
struct rza1_mux_conf {
|
|
u16 id;
|
|
u8 port;
|
|
u8 pin;
|
|
u8 mux_func;
|
|
u8 mux_flags;
|
|
u8 value;
|
|
};
|
|
|
|
/**
|
|
* rza1_port - describes a pin port
|
|
*
|
|
* This is mostly useful to lock register writes per-bank and not globally.
|
|
*
|
|
* @lock: protect access to HW registers
|
|
* @id: port number
|
|
* @base: logical address base
|
|
* @pins: pins sitting on this port
|
|
*/
|
|
struct rza1_port {
|
|
spinlock_t lock;
|
|
unsigned int id;
|
|
void __iomem *base;
|
|
struct pinctrl_pin_desc *pins;
|
|
};
|
|
|
|
/**
|
|
* rza1_pinctrl - RZ pincontroller device
|
|
*
|
|
* @dev: parent device structure
|
|
* @mutex: protect [pinctrl|pinmux]_generic functions
|
|
* @base: logical address base
|
|
* @nports: number of pin controller ports
|
|
* @ports: pin controller banks
|
|
* @pins: pin array for pinctrl core
|
|
* @desc: pincontroller desc for pinctrl core
|
|
* @pctl: pinctrl device
|
|
* @data: device specific data
|
|
*/
|
|
struct rza1_pinctrl {
|
|
struct device *dev;
|
|
|
|
struct mutex mutex;
|
|
|
|
void __iomem *base;
|
|
|
|
unsigned int nport;
|
|
struct rza1_port *ports;
|
|
|
|
struct pinctrl_pin_desc *pins;
|
|
struct pinctrl_desc desc;
|
|
struct pinctrl_dev *pctl;
|
|
|
|
const void *data;
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 pinmux flags
|
|
*/
|
|
static inline bool rza1_pinmux_get_bidir(unsigned int port,
|
|
unsigned int pin,
|
|
unsigned int func,
|
|
const struct rza1_bidir_entry *table)
|
|
{
|
|
const struct rza1_bidir_entry *entry = &table[port];
|
|
const struct rza1_bidir_pin *bidir_pin;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < entry->npins; ++i) {
|
|
bidir_pin = &entry->pins[i];
|
|
if (bidir_pin->pin == pin && bidir_pin->func == func)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static inline int rza1_pinmux_get_swio(unsigned int port,
|
|
unsigned int pin,
|
|
unsigned int func,
|
|
const struct rza1_swio_entry *table)
|
|
{
|
|
const struct rza1_swio_pin *swio_pin;
|
|
unsigned int i;
|
|
|
|
|
|
for (i = 0; i < table->npins; ++i) {
|
|
swio_pin = &table->pins[i];
|
|
if (swio_pin->port == port && swio_pin->pin == pin &&
|
|
swio_pin->func == func)
|
|
return swio_pin->input;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
/**
|
|
* rza1_pinmux_get_flags() - return pinmux flags associated to a pin
|
|
*/
|
|
static unsigned int rza1_pinmux_get_flags(unsigned int port, unsigned int pin,
|
|
unsigned int func,
|
|
struct rza1_pinctrl *rza1_pctl)
|
|
|
|
{
|
|
const struct rza1_pinmux_conf *pmx_conf = rza1_pctl->data;
|
|
const struct rza1_bidir_entry *bidir_entries = pmx_conf->bidir_entries;
|
|
const struct rza1_swio_entry *swio_entries = pmx_conf->swio_entries;
|
|
unsigned int pmx_flags = 0;
|
|
int ret;
|
|
|
|
if (rza1_pinmux_get_bidir(port, pin, func, bidir_entries))
|
|
pmx_flags |= MUX_FLAGS_BIDIR;
|
|
|
|
ret = rza1_pinmux_get_swio(port, pin, func, swio_entries);
|
|
if (ret == 0)
|
|
pmx_flags |= MUX_FLAGS_SWIO_OUTPUT;
|
|
else if (ret > 0)
|
|
pmx_flags |= MUX_FLAGS_SWIO_INPUT;
|
|
|
|
return pmx_flags;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 SoC operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_set_bit() - un-locked set/clear a single bit in pin configuration
|
|
* registers
|
|
*/
|
|
static inline void rza1_set_bit(struct rza1_port *port, unsigned int reg,
|
|
unsigned int bit, bool set)
|
|
{
|
|
void __iomem *mem = RZA1_ADDR(port->base, reg, port->id);
|
|
u16 val = ioread16(mem);
|
|
|
|
if (set)
|
|
val |= BIT(bit);
|
|
else
|
|
val &= ~BIT(bit);
|
|
|
|
iowrite16(val, mem);
|
|
}
|
|
|
|
static inline unsigned int rza1_get_bit(struct rza1_port *port,
|
|
unsigned int reg, unsigned int bit)
|
|
{
|
|
void __iomem *mem = RZA1_ADDR(port->base, reg, port->id);
|
|
|
|
return ioread16(mem) & BIT(bit);
|
|
}
|
|
|
|
/**
|
|
* rza1_pin_reset() - reset a pin to default initial state
|
|
*
|
|
* Reset pin state disabling input buffer and bi-directional control,
|
|
* and configure it as input port.
|
|
* Note that pin is now configured with direction as input but with input
|
|
* buffer disabled. This implies the pin value cannot be read in this state.
|
|
*
|
|
* @port: port where pin sits on
|
|
* @pin: pin offset
|
|
*/
|
|
static void rza1_pin_reset(struct rza1_port *port, unsigned int pin)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
rza1_set_bit(port, RZA1_PIBC_REG, pin, 0);
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 0);
|
|
|
|
rza1_set_bit(port, RZA1_PM_REG, pin, 1);
|
|
rza1_set_bit(port, RZA1_PMC_REG, pin, 0);
|
|
rza1_set_bit(port, RZA1_PIPC_REG, pin, 0);
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
}
|
|
|
|
static inline int rza1_pin_get_direction(struct rza1_port *port,
|
|
unsigned int pin)
|
|
{
|
|
unsigned long irqflags;
|
|
int input;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
input = rza1_get_bit(port, RZA1_PM_REG, pin);
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
|
|
return !!input;
|
|
}
|
|
|
|
/**
|
|
* rza1_pin_set_direction() - set I/O direction on a pin in port mode
|
|
*
|
|
* When running in output port mode keep PBDC enabled to allow reading the
|
|
* pin value from PPR.
|
|
*
|
|
* @port: port where pin sits on
|
|
* @pin: pin offset
|
|
* @input: input enable/disable flag
|
|
*/
|
|
static inline void rza1_pin_set_direction(struct rza1_port *port,
|
|
unsigned int pin, bool input)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
|
|
rza1_set_bit(port, RZA1_PIBC_REG, pin, 1);
|
|
if (input) {
|
|
rza1_set_bit(port, RZA1_PM_REG, pin, 1);
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 0);
|
|
} else {
|
|
rza1_set_bit(port, RZA1_PM_REG, pin, 0);
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 1);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
}
|
|
|
|
static inline void rza1_pin_set(struct rza1_port *port, unsigned int pin,
|
|
unsigned int value)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
rza1_set_bit(port, RZA1_P_REG, pin, !!value);
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
}
|
|
|
|
static inline int rza1_pin_get(struct rza1_port *port, unsigned int pin)
|
|
{
|
|
unsigned long irqflags;
|
|
int val;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
val = rza1_get_bit(port, RZA1_PPR_REG, pin);
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
|
|
return val;
|
|
}
|
|
|
|
/**
|
|
* rza1_pin_mux_single() - configure pin multiplexing on a single pin
|
|
*
|
|
* @pinctrl: RZ/A1 pin controller device
|
|
* @mux_conf: pin multiplexing descriptor
|
|
*/
|
|
static int rza1_pin_mux_single(struct rza1_pinctrl *rza1_pctl,
|
|
struct rza1_mux_conf *mux_conf)
|
|
{
|
|
struct rza1_port *port = &rza1_pctl->ports[mux_conf->port];
|
|
unsigned int pin = mux_conf->pin;
|
|
u8 mux_func = mux_conf->mux_func;
|
|
u8 mux_flags = mux_conf->mux_flags;
|
|
u8 mux_flags_from_table;
|
|
|
|
rza1_pin_reset(port, pin);
|
|
|
|
/* SWIO pinmux flags coming from DT are high precedence */
|
|
mux_flags_from_table = rza1_pinmux_get_flags(port->id, pin, mux_func,
|
|
rza1_pctl);
|
|
if (mux_flags)
|
|
mux_flags |= (mux_flags_from_table & MUX_FLAGS_BIDIR);
|
|
else
|
|
mux_flags = mux_flags_from_table;
|
|
|
|
if (mux_flags & MUX_FLAGS_BIDIR)
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 1);
|
|
|
|
/*
|
|
* Enable alternate function mode and select it.
|
|
*
|
|
* Be careful here: the pin mux sub-nodes in device tree
|
|
* enumerate alternate functions from 1 to 8;
|
|
* subtract 1 before using macros to match registers configuration
|
|
* which expects numbers from 0 to 7 instead.
|
|
*
|
|
* ----------------------------------------------------
|
|
* Alternate mode selection table:
|
|
*
|
|
* PMC PFC PFCE PFCAE (mux_func - 1)
|
|
* 1 0 0 0 0
|
|
* 1 1 0 0 1
|
|
* 1 0 1 0 2
|
|
* 1 1 1 0 3
|
|
* 1 0 0 1 4
|
|
* 1 1 0 1 5
|
|
* 1 0 1 1 6
|
|
* 1 1 1 1 7
|
|
* ----------------------------------------------------
|
|
*/
|
|
mux_func -= 1;
|
|
rza1_set_bit(port, RZA1_PFC_REG, pin, mux_func & MUX_FUNC_PFC_MASK);
|
|
rza1_set_bit(port, RZA1_PFCE_REG, pin, mux_func & MUX_FUNC_PFCE_MASK);
|
|
rza1_set_bit(port, RZA1_PFCEA_REG, pin, mux_func & MUX_FUNC_PFCEA_MASK);
|
|
|
|
/*
|
|
* All alternate functions except a few need PIPCn = 1.
|
|
* If PIPCn has to stay disabled (SW IO mode), configure PMn according
|
|
* to I/O direction specified by pin configuration -after- PMC has been
|
|
* set to one.
|
|
*/
|
|
if (mux_flags & (MUX_FLAGS_SWIO_INPUT | MUX_FLAGS_SWIO_OUTPUT))
|
|
rza1_set_bit(port, RZA1_PM_REG, pin,
|
|
mux_flags & MUX_FLAGS_SWIO_INPUT);
|
|
else
|
|
rza1_set_bit(port, RZA1_PIPC_REG, pin, 1);
|
|
|
|
rza1_set_bit(port, RZA1_PMC_REG, pin, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* gpio operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_gpio_request() - configure pin in port mode
|
|
*
|
|
* Configure a pin as gpio (port mode).
|
|
* After reset, the pin is in input mode with input buffer disabled.
|
|
* To use the pin as input or output, set_direction shall be called first
|
|
*
|
|
* @chip: gpio chip where the gpio sits on
|
|
* @gpio: gpio offset
|
|
*/
|
|
static int rza1_gpio_request(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_reset(port, gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rza1_gpio_disable_free() - reset a pin
|
|
*
|
|
* Surprisingly, disable_free a gpio, is equivalent to request it.
|
|
* Reset pin to port mode, with input buffer disabled. This overwrites all
|
|
* port direction settings applied with set_direction
|
|
*
|
|
* @chip: gpio chip where the gpio sits on
|
|
* @gpio: gpio offset
|
|
*/
|
|
static void rza1_gpio_free(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_reset(port, gpio);
|
|
}
|
|
|
|
static int rza1_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
return rza1_pin_get_direction(port, gpio);
|
|
}
|
|
|
|
static int rza1_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_set_direction(port, gpio, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rza1_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int gpio,
|
|
int value)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
/* Set value before driving pin direction */
|
|
rza1_pin_set(port, gpio, value);
|
|
rza1_pin_set_direction(port, gpio, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rza1_gpio_get() - read a gpio pin value
|
|
*
|
|
* Read gpio pin value through PPR register.
|
|
* Requires bi-directional mode to work when reading the value of a pin
|
|
* in output mode
|
|
*
|
|
* @chip: gpio chip where the gpio sits on
|
|
* @gpio: gpio offset
|
|
*/
|
|
static int rza1_gpio_get(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
return rza1_pin_get(port, gpio);
|
|
}
|
|
|
|
static void rza1_gpio_set(struct gpio_chip *chip, unsigned int gpio,
|
|
int value)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_set(port, gpio, value);
|
|
}
|
|
|
|
static const struct gpio_chip rza1_gpiochip_template = {
|
|
.request = rza1_gpio_request,
|
|
.free = rza1_gpio_free,
|
|
.get_direction = rza1_gpio_get_direction,
|
|
.direction_input = rza1_gpio_direction_input,
|
|
.direction_output = rza1_gpio_direction_output,
|
|
.get = rza1_gpio_get,
|
|
.set = rza1_gpio_set,
|
|
};
|
|
/* ----------------------------------------------------------------------------
|
|
* pinctrl operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_dt_node_pin_count() - Count number of pins in a dt node or in all its
|
|
* children sub-nodes
|
|
*
|
|
* @np: device tree node to parse
|
|
*/
|
|
static int rza1_dt_node_pin_count(struct device_node *np)
|
|
{
|
|
struct device_node *child;
|
|
struct property *of_pins;
|
|
unsigned int npins;
|
|
|
|
of_pins = of_find_property(np, "pinmux", NULL);
|
|
if (of_pins)
|
|
return of_pins->length / sizeof(u32);
|
|
|
|
npins = 0;
|
|
for_each_child_of_node(np, child) {
|
|
of_pins = of_find_property(child, "pinmux", NULL);
|
|
if (!of_pins)
|
|
return -EINVAL;
|
|
|
|
npins += of_pins->length / sizeof(u32);
|
|
}
|
|
|
|
return npins;
|
|
}
|
|
|
|
/**
|
|
* rza1_parse_pmx_function() - parse a pin mux sub-node
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
* @np: of pmx sub-node
|
|
* @mux_confs: array of pin mux configurations to fill with parsed info
|
|
* @grpins: array of pin ids to mux
|
|
*/
|
|
static int rza1_parse_pinmux_node(struct rza1_pinctrl *rza1_pctl,
|
|
struct device_node *np,
|
|
struct rza1_mux_conf *mux_confs,
|
|
unsigned int *grpins)
|
|
{
|
|
struct pinctrl_dev *pctldev = rza1_pctl->pctl;
|
|
char const *prop_name = "pinmux";
|
|
unsigned long *pin_configs;
|
|
unsigned int npin_configs;
|
|
struct property *of_pins;
|
|
unsigned int npins;
|
|
u8 pinmux_flags;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
of_pins = of_find_property(np, prop_name, NULL);
|
|
if (!of_pins) {
|
|
dev_dbg(rza1_pctl->dev, "Missing %s property\n", prop_name);
|
|
return -ENOENT;
|
|
}
|
|
npins = of_pins->length / sizeof(u32);
|
|
|
|
/*
|
|
* Collect pin configuration properties: they apply to all pins in
|
|
* this sub-node
|
|
*/
|
|
ret = pinconf_generic_parse_dt_config(np, pctldev, &pin_configs,
|
|
&npin_configs);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev,
|
|
"Unable to parse pin configuration options for %s\n",
|
|
np->name);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Create a mask with pinmux flags from pin configuration;
|
|
* very few pins (TIOC[0-4][A|B|C|D] require SWIO direction
|
|
* specified in device tree.
|
|
*/
|
|
pinmux_flags = 0;
|
|
for (i = 0; i < npin_configs && pinmux_flags == 0; i++)
|
|
switch (pinconf_to_config_param(pin_configs[i])) {
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
pinmux_flags |= MUX_FLAGS_SWIO_INPUT;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
pinmux_flags |= MUX_FLAGS_SWIO_OUTPUT;
|
|
default:
|
|
break;
|
|
|
|
}
|
|
|
|
kfree(pin_configs);
|
|
|
|
/* Collect pin positions and their mux settings. */
|
|
for (i = 0; i < npins; ++i) {
|
|
u32 of_pinconf;
|
|
struct rza1_mux_conf *mux_conf = &mux_confs[i];
|
|
|
|
ret = of_property_read_u32_index(np, prop_name, i, &of_pinconf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mux_conf->id = of_pinconf & MUX_PIN_ID_MASK;
|
|
mux_conf->port = RZA1_PIN_ID_TO_PORT(mux_conf->id);
|
|
mux_conf->pin = RZA1_PIN_ID_TO_PIN(mux_conf->id);
|
|
mux_conf->mux_func = MUX_FUNC(of_pinconf);
|
|
mux_conf->mux_flags = pinmux_flags;
|
|
|
|
if (mux_conf->port >= RZA1_NPORTS ||
|
|
mux_conf->pin >= RZA1_PINS_PER_PORT) {
|
|
dev_err(rza1_pctl->dev,
|
|
"Wrong port %u pin %u for %s property\n",
|
|
mux_conf->port, mux_conf->pin, prop_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grpins[i] = mux_conf->id;
|
|
}
|
|
|
|
return npins;
|
|
}
|
|
|
|
/**
|
|
* rza1_dt_node_to_map() - map a pin mux node to a function/group
|
|
*
|
|
* Parse and register a pin mux function.
|
|
*
|
|
* @pctldev: pin controller device
|
|
* @np: device tree node to parse
|
|
* @map: pointer to pin map (output)
|
|
* @num_maps: number of collected maps (output)
|
|
*/
|
|
static int rza1_dt_node_to_map(struct pinctrl_dev *pctldev,
|
|
struct device_node *np,
|
|
struct pinctrl_map **map,
|
|
unsigned int *num_maps)
|
|
{
|
|
struct rza1_pinctrl *rza1_pctl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct rza1_mux_conf *mux_confs, *mux_conf;
|
|
unsigned int *grpins, *grpin;
|
|
struct device_node *child;
|
|
const char *grpname;
|
|
const char **fngrps;
|
|
int ret, npins;
|
|
|
|
npins = rza1_dt_node_pin_count(np);
|
|
if (npins < 0) {
|
|
dev_err(rza1_pctl->dev, "invalid pinmux node structure\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Functions are made of 1 group only;
|
|
* in fact, functions and groups are identical for this pin controller
|
|
* except that functions carry an array of per-pin mux configuration
|
|
* settings.
|
|
*/
|
|
mux_confs = devm_kcalloc(rza1_pctl->dev, npins, sizeof(*mux_confs),
|
|
GFP_KERNEL);
|
|
grpins = devm_kcalloc(rza1_pctl->dev, npins, sizeof(*grpins),
|
|
GFP_KERNEL);
|
|
fngrps = devm_kzalloc(rza1_pctl->dev, sizeof(*fngrps), GFP_KERNEL);
|
|
|
|
if (!mux_confs || !grpins || !fngrps)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Parse the pinmux node.
|
|
* If the node does not contain "pinmux" property (-ENOENT)
|
|
* that property shall be specified in all its children sub-nodes.
|
|
*/
|
|
mux_conf = &mux_confs[0];
|
|
grpin = &grpins[0];
|
|
|
|
ret = rza1_parse_pinmux_node(rza1_pctl, np, mux_conf, grpin);
|
|
if (ret == -ENOENT)
|
|
for_each_child_of_node(np, child) {
|
|
ret = rza1_parse_pinmux_node(rza1_pctl, child, mux_conf,
|
|
grpin);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
grpin += ret;
|
|
mux_conf += ret;
|
|
}
|
|
else if (ret < 0)
|
|
return ret;
|
|
|
|
/* Register pin group and function name to pinctrl_generic */
|
|
grpname = np->name;
|
|
fngrps[0] = grpname;
|
|
|
|
mutex_lock(&rza1_pctl->mutex);
|
|
ret = pinctrl_generic_add_group(pctldev, grpname, grpins, npins,
|
|
NULL);
|
|
if (ret) {
|
|
mutex_unlock(&rza1_pctl->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = pinmux_generic_add_function(pctldev, grpname, fngrps, 1,
|
|
mux_confs);
|
|
if (ret)
|
|
goto remove_group;
|
|
mutex_unlock(&rza1_pctl->mutex);
|
|
|
|
dev_info(rza1_pctl->dev, "Parsed function and group %s with %d pins\n",
|
|
grpname, npins);
|
|
|
|
/* Create map where to retrieve function and mux settings from */
|
|
*num_maps = 0;
|
|
*map = kzalloc(sizeof(**map), GFP_KERNEL);
|
|
if (!*map) {
|
|
ret = -ENOMEM;
|
|
goto remove_function;
|
|
}
|
|
|
|
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
|
|
(*map)->data.mux.group = np->name;
|
|
(*map)->data.mux.function = np->name;
|
|
*num_maps = 1;
|
|
|
|
return 0;
|
|
|
|
remove_function:
|
|
mutex_lock(&rza1_pctl->mutex);
|
|
pinmux_generic_remove_last_function(pctldev);
|
|
|
|
remove_group:
|
|
pinctrl_generic_remove_last_group(pctldev);
|
|
mutex_unlock(&rza1_pctl->mutex);
|
|
|
|
dev_info(rza1_pctl->dev, "Unable to parse function and group %s\n",
|
|
grpname);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rza1_dt_free_map(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_map *map, unsigned int num_maps)
|
|
{
|
|
kfree(map);
|
|
}
|
|
|
|
static const struct pinctrl_ops rza1_pinctrl_ops = {
|
|
.get_groups_count = pinctrl_generic_get_group_count,
|
|
.get_group_name = pinctrl_generic_get_group_name,
|
|
.get_group_pins = pinctrl_generic_get_group_pins,
|
|
.dt_node_to_map = rza1_dt_node_to_map,
|
|
.dt_free_map = rza1_dt_free_map,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* pinmux operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_set_mux() - retrieve pins from a group and apply their mux settings
|
|
*
|
|
* @pctldev: pin controller device
|
|
* @selector: function selector
|
|
* @group: group selector
|
|
*/
|
|
static int rza1_set_mux(struct pinctrl_dev *pctldev, unsigned int selector,
|
|
unsigned int group)
|
|
{
|
|
struct rza1_pinctrl *rza1_pctl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct rza1_mux_conf *mux_confs;
|
|
struct function_desc *func;
|
|
struct group_desc *grp;
|
|
int i;
|
|
|
|
grp = pinctrl_generic_get_group(pctldev, group);
|
|
if (!grp)
|
|
return -EINVAL;
|
|
|
|
func = pinmux_generic_get_function(pctldev, selector);
|
|
if (!func)
|
|
return -EINVAL;
|
|
|
|
mux_confs = (struct rza1_mux_conf *)func->data;
|
|
for (i = 0; i < grp->num_pins; ++i) {
|
|
int ret;
|
|
|
|
ret = rza1_pin_mux_single(rza1_pctl, &mux_confs[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pinmux_ops rza1_pinmux_ops = {
|
|
.get_functions_count = pinmux_generic_get_function_count,
|
|
.get_function_name = pinmux_generic_get_function_name,
|
|
.get_function_groups = pinmux_generic_get_function_groups,
|
|
.set_mux = rza1_set_mux,
|
|
.strict = true,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 pin controller driver operations
|
|
*/
|
|
|
|
static unsigned int rza1_count_gpio_chips(struct device_node *np)
|
|
{
|
|
struct device_node *child;
|
|
unsigned int count = 0;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
if (!of_property_read_bool(child, "gpio-controller"))
|
|
continue;
|
|
|
|
count++;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* rza1_parse_gpiochip() - parse and register a gpio chip and pin range
|
|
*
|
|
* The gpio controller subnode shall provide a "gpio-ranges" list property as
|
|
* defined by gpio device tree binding documentation.
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
* @np: of gpio-controller node
|
|
* @chip: gpio chip to register to gpiolib
|
|
* @range: pin range to register to pinctrl core
|
|
*/
|
|
static int rza1_parse_gpiochip(struct rza1_pinctrl *rza1_pctl,
|
|
struct device_node *np,
|
|
struct gpio_chip *chip,
|
|
struct pinctrl_gpio_range *range)
|
|
{
|
|
const char *list_name = "gpio-ranges";
|
|
struct of_phandle_args of_args;
|
|
unsigned int gpioport;
|
|
u32 pinctrl_base;
|
|
int ret;
|
|
|
|
ret = of_parse_phandle_with_fixed_args(np, list_name, 3, 0, &of_args);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev, "Unable to parse %s list property\n",
|
|
list_name);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Find out on which port this gpio-chip maps to by inspecting the
|
|
* second argument of the "gpio-ranges" property.
|
|
*/
|
|
pinctrl_base = of_args.args[1];
|
|
gpioport = RZA1_PIN_ID_TO_PORT(pinctrl_base);
|
|
if (gpioport > RZA1_NPORTS) {
|
|
dev_err(rza1_pctl->dev,
|
|
"Invalid values in property %s\n", list_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*chip = rza1_gpiochip_template;
|
|
chip->base = -1;
|
|
chip->label = devm_kasprintf(rza1_pctl->dev, GFP_KERNEL, "%s-%u",
|
|
np->name, gpioport);
|
|
chip->ngpio = of_args.args[2];
|
|
chip->of_node = np;
|
|
chip->parent = rza1_pctl->dev;
|
|
|
|
range->id = gpioport;
|
|
range->name = chip->label;
|
|
range->pin_base = range->base = pinctrl_base;
|
|
range->npins = of_args.args[2];
|
|
range->gc = chip;
|
|
|
|
ret = devm_gpiochip_add_data(rza1_pctl->dev, chip,
|
|
&rza1_pctl->ports[gpioport]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pinctrl_add_gpio_range(rza1_pctl->pctl, range);
|
|
|
|
dev_info(rza1_pctl->dev, "Parsed gpiochip %s with %d pins\n",
|
|
chip->label, chip->ngpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rza1_gpio_register() - parse DT to collect gpio-chips and gpio-ranges
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
*/
|
|
static int rza1_gpio_register(struct rza1_pinctrl *rza1_pctl)
|
|
{
|
|
struct device_node *np = rza1_pctl->dev->of_node;
|
|
struct pinctrl_gpio_range *gpio_ranges;
|
|
struct gpio_chip *gpio_chips;
|
|
struct device_node *child;
|
|
unsigned int ngpiochips;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ngpiochips = rza1_count_gpio_chips(np);
|
|
if (ngpiochips == 0) {
|
|
dev_dbg(rza1_pctl->dev, "No gpiochip registered\n");
|
|
return 0;
|
|
}
|
|
|
|
gpio_chips = devm_kcalloc(rza1_pctl->dev, ngpiochips,
|
|
sizeof(*gpio_chips), GFP_KERNEL);
|
|
gpio_ranges = devm_kcalloc(rza1_pctl->dev, ngpiochips,
|
|
sizeof(*gpio_ranges), GFP_KERNEL);
|
|
if (!gpio_chips || !gpio_ranges)
|
|
return -ENOMEM;
|
|
|
|
i = 0;
|
|
for_each_child_of_node(np, child) {
|
|
if (!of_property_read_bool(child, "gpio-controller"))
|
|
continue;
|
|
|
|
ret = rza1_parse_gpiochip(rza1_pctl, child, &gpio_chips[i],
|
|
&gpio_ranges[i]);
|
|
if (ret)
|
|
goto gpiochip_remove;
|
|
|
|
++i;
|
|
}
|
|
|
|
dev_info(rza1_pctl->dev, "Registered %u gpio controllers\n", i);
|
|
|
|
return 0;
|
|
|
|
gpiochip_remove:
|
|
for (; i > 0; i--)
|
|
devm_gpiochip_remove(rza1_pctl->dev, &gpio_chips[i - 1]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* rza1_pinctrl_register() - Enumerate pins, ports and gpiochips; register
|
|
* them to pinctrl and gpio cores.
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
*/
|
|
static int rza1_pinctrl_register(struct rza1_pinctrl *rza1_pctl)
|
|
{
|
|
struct pinctrl_pin_desc *pins;
|
|
struct rza1_port *ports;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
pins = devm_kcalloc(rza1_pctl->dev, RZA1_NPINS, sizeof(*pins),
|
|
GFP_KERNEL);
|
|
ports = devm_kcalloc(rza1_pctl->dev, RZA1_NPORTS, sizeof(*ports),
|
|
GFP_KERNEL);
|
|
if (!pins || !ports)
|
|
return -ENOMEM;
|
|
|
|
rza1_pctl->pins = pins;
|
|
rza1_pctl->desc.pins = pins;
|
|
rza1_pctl->desc.npins = RZA1_NPINS;
|
|
rza1_pctl->ports = ports;
|
|
|
|
for (i = 0; i < RZA1_NPINS; ++i) {
|
|
unsigned int pin = RZA1_PIN_ID_TO_PIN(i);
|
|
unsigned int port = RZA1_PIN_ID_TO_PORT(i);
|
|
|
|
pins[i].number = i;
|
|
pins[i].name = devm_kasprintf(rza1_pctl->dev, GFP_KERNEL,
|
|
"P%u-%u", port, pin);
|
|
|
|
if (i % RZA1_PINS_PER_PORT == 0) {
|
|
/*
|
|
* Setup ports;
|
|
* they provide per-port lock and logical base address.
|
|
*/
|
|
unsigned int port_id = RZA1_PIN_ID_TO_PORT(i);
|
|
|
|
ports[port_id].id = port_id;
|
|
ports[port_id].base = rza1_pctl->base;
|
|
ports[port_id].pins = &pins[i];
|
|
spin_lock_init(&ports[port_id].lock);
|
|
}
|
|
}
|
|
|
|
ret = devm_pinctrl_register_and_init(rza1_pctl->dev, &rza1_pctl->desc,
|
|
rza1_pctl, &rza1_pctl->pctl);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev,
|
|
"RZ/A1 pin controller registration failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = pinctrl_enable(rza1_pctl->pctl);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev,
|
|
"RZ/A1 pin controller failed to start\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = rza1_gpio_register(rza1_pctl);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev, "RZ/A1 GPIO registration failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rza1_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct rza1_pinctrl *rza1_pctl;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
rza1_pctl = devm_kzalloc(&pdev->dev, sizeof(*rza1_pctl), GFP_KERNEL);
|
|
if (!rza1_pctl)
|
|
return -ENOMEM;
|
|
|
|
rza1_pctl->dev = &pdev->dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
rza1_pctl->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rza1_pctl->base))
|
|
return PTR_ERR(rza1_pctl->base);
|
|
|
|
mutex_init(&rza1_pctl->mutex);
|
|
|
|
platform_set_drvdata(pdev, rza1_pctl);
|
|
|
|
rza1_pctl->desc.name = DRIVER_NAME;
|
|
rza1_pctl->desc.pctlops = &rza1_pinctrl_ops;
|
|
rza1_pctl->desc.pmxops = &rza1_pinmux_ops;
|
|
rza1_pctl->desc.owner = THIS_MODULE;
|
|
rza1_pctl->data = of_device_get_match_data(&pdev->dev);
|
|
|
|
ret = rza1_pinctrl_register(rza1_pctl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(&pdev->dev,
|
|
"RZ/A1 pin controller and gpio successfully registered\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id rza1_pinctrl_of_match[] = {
|
|
{
|
|
.compatible = "renesas,r7s72100-ports",
|
|
.data = &rza1h_pmx_conf,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver rza1_pinctrl_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = rza1_pinctrl_of_match,
|
|
},
|
|
.probe = rza1_pinctrl_probe,
|
|
};
|
|
|
|
static int __init rza1_pinctrl_init(void)
|
|
{
|
|
return platform_driver_register(&rza1_pinctrl_driver);
|
|
}
|
|
core_initcall(rza1_pinctrl_init);
|
|
|
|
MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org");
|
|
MODULE_DESCRIPTION("Pin and gpio controller driver for Reneas RZ/A1 SoC");
|
|
MODULE_LICENSE("GPL v2");
|