linux_dsm_epyc7002/include/linux/soundwire/sdw_intel.h
Rander Wang 905b5a81af soundwire: intel: add prototype for WAKEEN interrupt processing
In ClockStop mode, the PCI device will be notified of a wake, which
will be handled from an interrupt thread.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191212014507.28050-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-12 09:17:07 +05:30

139 lines
4.0 KiB
C

/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
/* Copyright(c) 2015-17 Intel Corporation. */
#ifndef __SDW_INTEL_H
#define __SDW_INTEL_H
#include <linux/irqreturn.h>
/**
* struct sdw_intel_stream_params_data: configuration passed during
* the @params_stream callback, e.g. for interaction with DSP
* firmware.
*/
struct sdw_intel_stream_params_data {
struct snd_pcm_substream *substream;
struct snd_soc_dai *dai;
struct snd_pcm_hw_params *hw_params;
int link_id;
int alh_stream_id;
};
/**
* struct sdw_intel_stream_free_data: configuration passed during
* the @free_stream callback, e.g. for interaction with DSP
* firmware.
*/
struct sdw_intel_stream_free_data {
struct snd_pcm_substream *substream;
struct snd_soc_dai *dai;
int link_id;
};
/**
* struct sdw_intel_ops: Intel audio driver callback ops
*
*/
struct sdw_intel_ops {
int (*params_stream)(struct device *dev,
struct sdw_intel_stream_params_data *params_data);
int (*free_stream)(struct device *dev,
struct sdw_intel_stream_free_data *free_data);
};
/**
* struct sdw_intel_acpi_info - Soundwire Intel information found in ACPI tables
* @handle: ACPI controller handle
* @count: link count found with "sdw-master-count" property
* @link_mask: bit-wise mask listing links enabled by BIOS menu
*
* this structure could be expanded to e.g. provide all the _ADR
* information in case the link_mask is not sufficient to identify
* platform capabilities.
*/
struct sdw_intel_acpi_info {
acpi_handle handle;
int count;
u32 link_mask;
};
struct sdw_intel_link_res;
/**
* struct sdw_intel_ctx - context allocated by the controller
* driver probe
* @count: link count
* @mmio_base: mmio base of SoundWire registers, only used to check
* hardware capabilities after all power dependencies are settled.
* @link_mask: bit-wise mask listing SoundWire links reported by the
* Controller
* @handle: ACPI parent handle
* @links: information for each link (controller-specific and kept
* opaque here)
* @link_list: list to handle interrupts across all links
*/
struct sdw_intel_ctx {
int count;
void __iomem *mmio_base;
u32 link_mask;
acpi_handle handle;
struct sdw_intel_link_res *links;
struct list_head link_list;
};
/**
* struct sdw_intel_res - Soundwire Intel global resource structure,
* typically populated by the DSP driver
*
* @count: link count
* @mmio_base: mmio base of SoundWire registers
* @irq: interrupt number
* @handle: ACPI parent handle
* @parent: parent device
* @ops: callback ops
* @dev: device implementing hwparams and free callbacks
* @link_mask: bit-wise mask listing links selected by the DSP driver
* This mask may be a subset of the one reported by the controller since
* machine-specific quirks are handled in the DSP driver.
*/
struct sdw_intel_res {
int count;
void __iomem *mmio_base;
int irq;
acpi_handle handle;
struct device *parent;
const struct sdw_intel_ops *ops;
struct device *dev;
u32 link_mask;
};
/*
* On Intel platforms, the SoundWire IP has dependencies on power
* rails shared with the DSP, and the initialization steps are split
* in three. First an ACPI scan to check what the firmware describes
* in DSDT tables, then an allocation step (with no hardware
* configuration but with all the relevant devices created) and last
* the actual hardware configuration. The final stage is a global
* interrupt enable which is controlled by the DSP driver. Splitting
* these phases helps simplify the boot flow and make early decisions
* on e.g. which machine driver to select (I2S mode, HDaudio or
* SoundWire).
*/
int sdw_intel_acpi_scan(acpi_handle *parent_handle,
struct sdw_intel_acpi_info *info);
void sdw_intel_process_wakeen_event(struct sdw_intel_ctx *ctx);
struct sdw_intel_ctx *
sdw_intel_probe(struct sdw_intel_res *res);
int sdw_intel_startup(struct sdw_intel_ctx *ctx);
void sdw_intel_exit(struct sdw_intel_ctx *ctx);
void sdw_intel_enable_irq(void __iomem *mmio_base, bool enable);
irqreturn_t sdw_intel_thread(int irq, void *dev_id);
#endif