AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 01:16:57 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
90444b9584
linux_dsm_epyc7002/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
Lucas Stach 49b027156b ARM: dts: imx6: RDU2: assign video PLL as input to LDB 
Currently we don't ensure that the LDB is clocked from the video PLL
and relied on the bootloader to do the correct setup. This isn't always
true, in which case we would run with a vastly different video clock
than the desired one. Fix this by assigning the proper parent to the
LDB.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16 10:44:09 +08:00

1141 lines
24 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2016-2017 Zodiac Inflight Innovations
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
chosen {
stdout-path = &uart1;
};
aliases {
mdio-gpio0 = &mdio1;
rtc0 = &ds1341;
};
mdio1: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mdio1>;
gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
&gpio6 4 GPIO_ACTIVE_HIGH>;
phy: ethernet-phy@0 {
pinctrl-0 = <&pinctrl_rmii_phy_irq>;
pinctrl-names = "default";
reg = <0>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
};
};
reg_28p0v: regulator-28p0v {
compatible = "regulator-fixed";
regulator-name = "28V_IN";
regulator-min-microvolt = <28000000>;
regulator-max-microvolt = <28000000>;
regulator-always-on;
};
reg_12p0v: regulator-12p0v {
compatible = "regulator-fixed";
vin-supply = <&reg_28p0v>;
regulator-name = "12V_MAIN";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
};
reg_5p0v_main: regulator-5p0v-main {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "5V_MAIN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_3p3v_pmic: regulator-3p3v-pmic {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "PMIC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
vin-supply = <&reg_3p3v_pmic>;
regulator-name = "GEN_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v_sd: regulator-3p3v-sd {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
vin-supply = <&reg_3p3v>;
regulator-name = "3V3_SD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
startup-delay-us = <1000>;
enable-active-high;
regulator-always-on;
};
reg_3p3v_display: regulator-3p3v-display {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "3V3_DISPLAY";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v_ssd: regulator-3p3v-ssd {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "3V3_SSD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sound1 {
compatible = "simple-audio-card";
simple-audio-card,name = "Front";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound1_codec>;
simple-audio-card,frame-master = <&sound1_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HPLEFT",
"Headphone Jack", "HPRIGHT",
"LEFTIN", "HPL",
"RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa1>;
sound1_cpu: simple-audio-card,cpu {
sound-dai = <&ssi2>;
};
sound1_codec: simple-audio-card,codec {
sound-dai = <&codec1>;
clocks = <&cs2000>;
};
};
sound2 {
compatible = "simple-audio-card";
simple-audio-card,name = "Back";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound2_codec>;
simple-audio-card,frame-master = <&sound2_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HPLEFT",
"Headphone Jack", "HPRIGHT",
"LEFTIN", "HPL",
"RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa2>;
sound2_cpu: simple-audio-card,cpu {
sound-dai = <&ssi1>;
};
sound2_codec: simple-audio-card,codec {
sound-dai = <&codec2>;
clocks = <&cs2000>;
};
};
panel {
power-supply = <&reg_3p3v_display>;
backlight = <&sp_backlight>;
status = "disabled";
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
disp0: disp0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0>;
status = "disabled";
port@0 {
reg = <0>;
disp0_in_0: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
disp0_out: endpoint {
remote-endpoint = <&tc358767_in>;
};
};
};
cs2000_ref: cs2000-ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
cs2000_in_dummy: cs2000-in-dummy {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
edp_refclk: edp-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
};
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
};
&cpu0 {
fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */
1200000 1300000
996000 1275000
852000 1275000
792000 1200000
396000 1200000
>;
};
&reg_arm {
vin-supply = <&sw1a_reg>;
};
&reg_pu {
vin-supply = <&sw1c_reg>;
};
&reg_soc {
vin-supply = <&sw1c_reg>;
};
&ldb {
lvds-channel@0 {
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
rave-sp {
compatible = "zii,rave-sp-rdu2";
current-speed = <1000000>;
#address-cells = <1>;
#size-cells = <1>;
watchdog {
compatible = "zii,rave-sp-watchdog";
};
sp_backlight: backlight {
compatible = "zii,rave-sp-backlight";
};
pwrbutton {
compatible = "zii,rave-sp-pwrbutton";
};
eeprom@a3 {
compatible = "zii,rave-sp-eeprom";
reg = <0xa3 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
zii,eeprom-name = "dds-eeprom";
};
eeprom@a4 {
compatible = "zii,rave-sp-eeprom";
reg = <0xa4 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
zii,eeprom-name = "main-eeprom";
};
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
status = "okay";
flash@0 {
compatible = "st,m25p128", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&gpio3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
usb-emulation {
gpio-hog;
gpios = <19 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb-emulation";
};
usb-mode1 {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode1";
};
usb-pwr {
gpio-hog;
gpios = <22 GPIO_ACTIVE_LOW>;
output-high;
line-name = "usb-pwr-ctrl-en-n";
};
usb-mode2 {
gpio-hog;
gpios = <23 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode2";
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <100000>;
status = "okay";
codec2: codec@18 {
compatible = "ti,tlv320dac3100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_codec2>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
accel@1c {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
compatible = "fsl,mma8451";
reg = <0x1c>;
interrupt-parent = <&gpio1>;
interrupt-names = "INT2";
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&reg_3p3v>;
vddio-supply = <&reg_3p3v>;
};
hpa2: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpa2>;
reg = <0x60>;
power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0v_main>;
};
edp-bridge@68 {
compatible = "toshiba,tc358767";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tc358767>;
reg = <0x68>;
shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
clock-names = "ref";
clocks = <&edp_refclk>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
tc358767_in: endpoint {
remote-endpoint = <&disp0_out>;
};
};
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
pmic@8 {
compatible = "fsl,pfuze100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pfuze100_irq>;
reg = <0x08>;
interrupt-parent = <&gpio7>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
};
watchdog@38 {
compatible = "zii,rave-wdt";
reg = <0x38>;
};
temp-sense@48 {
compatible = "national,lm75";
reg = <0x48>;
};
cs2000: clkgen@4e {
compatible = "cirrus,cs2000-cp";
reg = <0x4e>;
#clock-cells = <0>;
clock-names = "clk_in", "ref_clk";
clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24000000>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
ds1341: rtc@68 {
compatible = "dallas,ds1341";
reg = <0x68>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clock-frequency = <400000>;
status = "okay";
codec1: codec@18 {
compatible = "ti,tlv320dac3100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_codec1>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
touchscreen@20 {
compatible = "syna,rmi4-i2c";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
reg = <0x20>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&reg_5p0v_main>;
vio-supply = <&reg_3p3v>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <2>;
};
rmi4-f11@11 {
reg = <0x11>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
};
rmi4-f12@12 {
reg = <0x12>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
};
};
touchscreen@2a {
compatible = "eeti,exc3000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
reg = <0x2a>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
status = "disabled";
};
reg_5p0v_user_usb: charger@32 {
compatible = "microchip,ucs1002";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ucs1002_pins>;
reg = <0x32>;
interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
<&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "a_det", "alert";
};
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpa1>;
reg = <0x60>;
power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0v_main>;
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&disp0_in_0>;
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
status = "okay";
host@0 {
reg = <0 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
i210: i210@0 {
reg = <0 0 0 0 0>;
};
};
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
no-sdio;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
no-sdio;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
non-removable;
no-sdio;
no-sd;
status = "okay";
};
&sata {
target-supply = <&reg_3p3v_ssd>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rmii";
phy-handle = <&phy>;
phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
phy-supply = <&reg_3p3v>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
switch: switch@0 {
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_switch_irq>;
pinctrl-names = "default";
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <512>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "gigabit_proc";
phy-handle = <&switchphy0>;
};
port@1 {
reg = <1>;
label = "netaux";
phy-handle = <&switchphy1>;
};
port@2 {
reg = <2>;
label = "cpu";
ethernet = <&fec>;
fixed-link {
speed = <100>;
full-duplex;
};
};
port@3 {
reg = <3>;
label = "netright";
phy-handle = <&switchphy3>;
};
port@4 {
reg = <4>;
label = "netleft";
phy-handle = <&switchphy4>;
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
switchphy0: switchphy@0 {
reg = <0>;
interrupt-parent = <&switch>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy1: switchphy@1 {
reg = <1>;
interrupt-parent = <&switch>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy2: switchphy@2 {
reg = <2>;
interrupt-parent = <&switch>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy3: switchphy@3 {
reg = <3>;
interrupt-parent = <&switch>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy4: switchphy@4 {
reg = <4>;
interrupt-parent = <&switch>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
};
};
&usbh1 {
vbus-supply = <&reg_5p0v_main>;
disable-over-current;
maximum-speed = "full-speed";
status = "okay";
};
&usbotg {
vbus-supply = <&reg_5p0v_user_usb>;
disable-over-current;
dr_mode = "host";
status = "okay";
};
&snvs_rtc {
status = "disabled";
};
&ssi1 {
status = "okay";
};
&ssi2 {
status = "okay";
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
ssi1 {
fsl,audmux-port = <0>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSEL(2) |
IMX_AUDMUX_V2_PTCR_TCSEL(2) |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(2)
>;
};
aud3 {
fsl,audmux-port = <2>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(0)
>;
};
ssi2 {
fsl,audmux-port = <1>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSEL(4) |
IMX_AUDMUX_V2_PTCR_TCSEL(4) |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(4)
>;
};
aud5 {
fsl,audmux-port = <4>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(1)
>;
};
};
&wdog1 {
status = "disabled";
};
&iomuxc {
pinctrl_accel: accelgrp {
fsl,pins = <
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
>;
};
pinctrl_codec1: dac1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x40000038
>;
};
pinctrl_codec2: dac2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x40000038
>;
};
pinctrl_disp0: disp0grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f9
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f9
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f9
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f9
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f9
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f9
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f9
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f9
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f9
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f9
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f9
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f9
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f9
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f9
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f9
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f9
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f9
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f9
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f9
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f9
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f9
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f9
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f9
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f9
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f9
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f9
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f9
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b1
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x000b1
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b1
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x40010040
MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x100b0
MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
>;
};
pinctrl_gpio3_hog: gpio3hoggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_mdio1: bitbangmdiogrp {
fsl,pins = <
/* Bitbang MDIO for DEB Switch */
MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x4001b030
MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40018830
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x10038
>;
};
pinctrl_pfuze100_irq: pfuze100grp {
fsl,pins = <
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x40010000
>;
};
pinctrl_reg_3p3v_sd: mmcsupply1grp {
fsl,pins = <
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x858
>;
};
pinctrl_rmii_phy_irq: phygrp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000
>;
};
pinctrl_switch_irq: switchgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x4001b000
>;
};
pinctrl_tc358767: tc358767grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10
>;
};
pinctrl_tpa1: tpa6130-1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x40000038
>;
};
pinctrl_tpa2: tpa6130-2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x40000038
>;
};
pinctrl_ts: tsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_ucs1002_pins: ucs1002grp {
fsl,pins = <
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x10059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10069
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x1b0b1
>;
};
};
Reference in New Issue View Git Blame Copy Permalink