mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
f9b7989859
The MMC controllers have a bunch of generic options that are needed in a device tree. Add a YAML schemas for those. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
375 lines
11 KiB
YAML
375 lines
11 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: MMC Controller Generic Binding
|
|
|
|
maintainers:
|
|
- Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
description: |
|
|
These properties are common to multiple MMC host controllers. Any host
|
|
that requires the respective functionality should implement them using
|
|
these definitions.
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^mmc(@.*)?$"
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
description: |
|
|
The cell is the slot ID if a function subnode is used.
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
# Card Detection.
|
|
# If none of these properties are supplied, the host native card
|
|
# detect will be used. Only one of them should be provided.
|
|
|
|
broken-cd:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
There is no card detection available; polling must be used.
|
|
|
|
cd-gpios:
|
|
description:
|
|
The card detection will be done using the GPIO provided.
|
|
|
|
non-removable:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Non-removable slot (like eMMC); assume always present.
|
|
|
|
# *NOTE* on CD and WP polarity. To use common for all SD/MMC host
|
|
# controllers line polarity properties, we have to fix the meaning
|
|
# of the "normal" and "inverted" line levels. We choose to follow
|
|
# the SDHCI standard, which specifies both those lines as "active
|
|
# low." Therefore, using the "cd-inverted" property means, that the
|
|
# CD line is active high, i.e. it is high, when a card is
|
|
# inserted. Similar logic applies to the "wp-inverted" property.
|
|
#
|
|
# CD and WP lines can be implemented on the hardware in one of two
|
|
# ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or
|
|
# as dedicated pins. Polarity of dedicated pins can be specified,
|
|
# using *-inverted properties. GPIO polarity can also be specified
|
|
# using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the
|
|
# latter case. We choose to use the XOR logic for GPIO CD and WP
|
|
# lines. This means, the two properties are "superimposed," for
|
|
# example leaving the GPIO_ACTIVE_LOW flag clear and specifying the
|
|
# respective *-inverted property property results in a
|
|
# double-inversion and actually means the "normal" line polarity is
|
|
# in effect.
|
|
wp-inverted:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
The Write Protect line polarity is inverted.
|
|
|
|
cd-inverted:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
The CD line polarity is inverted.
|
|
|
|
# Other properties
|
|
|
|
bus-width:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- enum: [1, 4, 8]
|
|
default: 1
|
|
description:
|
|
Number of data lines.
|
|
|
|
max-frequency:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- minimum: 400000
|
|
- maximum: 200000000
|
|
description:
|
|
Maximum operating frequency of the bus.
|
|
|
|
disable-wp:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
When set, no physical write-protect line is present. This
|
|
property should only be specified when the controller has a
|
|
dedicated write-protect detection logic. If a GPIO is always
|
|
used for the write-protect detection. If a GPIO is always used
|
|
for the write-protect detection logic, it is sufficient to not
|
|
specify the wp-gpios property in the absence of a write-protect
|
|
line.
|
|
|
|
wp-gpios:
|
|
description:
|
|
GPIO to use for the write-protect detection.
|
|
|
|
cd-debounce-delay-ms:
|
|
description:
|
|
Set delay time before detecting card after card insert
|
|
interrupt.
|
|
|
|
no-1-8-v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
When specified, denotes that 1.8V card voltage is not supported
|
|
on this system, even if the controller claims it.
|
|
|
|
cap-sd-highspeed:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SD high-speed timing is supported.
|
|
|
|
cap-mmc-highspeed:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
MMC high-speed timing is supported.
|
|
|
|
sd-uhs-sdr12:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SD UHS SDR12 speed is supported.
|
|
|
|
sd-uhs-sdr25:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SD UHS SDR25 speed is supported.
|
|
|
|
sd-uhs-sdr50:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SD UHS SDR50 speed is supported.
|
|
|
|
sd-uhs-sdr104:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SD UHS SDR104 speed is supported.
|
|
|
|
sd-uhs-ddr50:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SD UHS DDR50 speed is supported.
|
|
|
|
cap-power-off-card:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Powering off the card is safe.
|
|
|
|
cap-mmc-hw-reset:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC hardware reset is supported
|
|
|
|
cap-sdio-irq:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
enable SDIO IRQ signalling on this interface
|
|
|
|
full-pwr-cycle:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Full power cycle of the card is supported.
|
|
|
|
mmc-ddr-1_2v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC high-speed DDR mode (1.2V I/O) is supported.
|
|
|
|
mmc-ddr-1_8v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC high-speed DDR mode (1.8V I/O) is supported.
|
|
|
|
mmc-ddr-3_3v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC high-speed DDR mode (3.3V I/O) is supported.
|
|
|
|
mmc-hs200-1_2v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC HS200 mode (1.2V I/O) is supported.
|
|
|
|
mmc-hs200-1_8v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC HS200 mode (1.8V I/O) is supported.
|
|
|
|
mmc-hs400-1_2v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC HS400 mode (1.2V I/O) is supported.
|
|
|
|
mmc-hs400-1_8v:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC HS400 mode (1.8V I/O) is supported.
|
|
|
|
mmc-hs400-enhanced-strobe:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
eMMC HS400 enhanced strobe mode is supported
|
|
|
|
dsr:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- minimum: 0
|
|
- maximum: 0xffff
|
|
description:
|
|
Value the card Driver Stage Register (DSR) should be programmed
|
|
with.
|
|
|
|
no-sdio:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Controller is limited to send SDIO commands during
|
|
initialization.
|
|
|
|
no-sd:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Controller is limited to send SD commands during initialization.
|
|
|
|
no-mmc:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Controller is limited to send MMC commands during
|
|
initialization.
|
|
|
|
fixed-emmc-driver-type:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- minimum: 0
|
|
- maximum: 4
|
|
description:
|
|
For non-removable eMMC, enforce this driver type. The value is
|
|
the driver type as specified in the eMMC specification (table
|
|
206 in spec version 5.1)
|
|
|
|
post-power-on-delay-ms:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- default: 10
|
|
description:
|
|
It was invented for MMC pwrseq-simple which could be referred to
|
|
mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
|
|
waiting for I/O signalling and card power supply to be stable,
|
|
regardless of whether pwrseq-simple is used. Default to 10ms if
|
|
no available.
|
|
|
|
supports-cqe:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
The presence of this property indicates that the corresponding
|
|
MMC host controller supports HW command queue feature.
|
|
|
|
disable-cqe-dcmd:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
The presence of this property indicates that the MMC
|
|
controller\'s command queue engine (CQE) does not support direct
|
|
commands (DCMDs).
|
|
|
|
keep-power-in-suspend:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SDIO only. Preserves card power during a suspend/resume cycle.
|
|
|
|
# Deprecated: enable-sdio-wakeup
|
|
wakeup-source:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
SDIO only. Enables wake up of host system on SDIO IRQ assertion.
|
|
|
|
vmmc-supply:
|
|
description:
|
|
Supply for the card power
|
|
|
|
vqmmc-supply:
|
|
description:
|
|
Supply for the bus IO line power
|
|
|
|
mmc-pwrseq:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
System-on-Chip designs may specify a specific MMC power
|
|
sequence. To successfully detect an (e)MMC/SD/SDIO card, that
|
|
power sequence must be maintained while initializing the card.
|
|
|
|
patternProperties:
|
|
"^.*@[0-9]+$":
|
|
type: object
|
|
description: |
|
|
On embedded systems the cards connected to a host may need
|
|
additional properties. These can be specified in subnodes to the
|
|
host controller node. The subnodes are identified by the
|
|
standard \'reg\' property. Which information exactly can be
|
|
specified depends on the bindings for the SDIO function driver
|
|
for the subnode, as specified by the compatible string.
|
|
|
|
properties:
|
|
compatible:
|
|
description: |
|
|
Name of SDIO function following generic names recommended
|
|
practice
|
|
|
|
reg:
|
|
items:
|
|
- minimum: 0
|
|
maximum: 7
|
|
description:
|
|
Must contain the SDIO function number of the function this
|
|
subnode describes. A value of 0 denotes the memory SD
|
|
function, values from 1 to 7 denote the SDIO functions.
|
|
|
|
broken-hpi:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Use this to indicate that the mmc-card has a broken hpi
|
|
implementation, and that hpi should not be used.
|
|
|
|
required:
|
|
- reg
|
|
|
|
dependencies:
|
|
cd-debounce-delay-ms: [ cd-gpios ]
|
|
fixed-emmc-driver-type: [ non-removable ]
|
|
|
|
examples:
|
|
- |
|
|
sdhci@ab000000 {
|
|
compatible = "sdhci";
|
|
reg = <0xab000000 0x200>;
|
|
interrupts = <23>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio 69 0>;
|
|
cd-inverted;
|
|
wp-gpios = <&gpio 70 0>;
|
|
max-frequency = <50000000>;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
mmc-pwrseq = <&sdhci0_pwrseq>;
|
|
};
|
|
|
|
- |
|
|
mmc3: mmc@1c12000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc3_pins_a>;
|
|
vmmc-supply = <®_vmmc3>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
mmc-pwrseq = <&sdhci0_pwrseq>;
|
|
|
|
brcmf: bcrmf@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm43xx-fmac";
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <10 8>;
|
|
interrupt-names = "host-wake";
|
|
};
|
|
};
|